| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <12276535632759-git-send-email-jayakumar.lkml@gmail.com>
Date: Wed, 26 Nov 2008 06:52:43 +0800
From: Jaya Kumar <jayakumar.lkml@...il.com>
To: jayakumar.lkml@...il.com
Cc: Jaya Kumar <jayakumar.lkml@...il.com>,
David Brownell <dbrownell@...rs.sourceforge.net>,
David Brownell <david-b@...bell.net>,
Sam Ravnborg <sam@...nborg.org>,
Jean Delvare <khali@...ux-fr.org>,
Eric Miao <eric.miao@...vell.com>,
Haavard Skinnemoen <hskinnemoen@...el.com>,
Philipp Zabel <philipp.zabel@...il.com>,
Russell King <rmk@....linux.org.uk>,
Ben Gardner <bgardner@...tec.com>, Greg KH <greg@...ah.com>,
linux-arm-kernel@...ts.arm.linux.org.uk,
linux-fbdev-devel@...ts.sourceforge.net,
linux-kernel@...r.kernel.org
Subject: [RFC 2.6.27 1/1] gpiolib: add support for batch set of pins
Beloved friends,
I would like to request your feedback on the following idea. I hope I have
made sure to CC all the right people and the right lists! If not, PLEASE
let me know! I couldn't find a MAINTAINERS entry for gpiolib so I just
used what I saw in the git log and have also added people and lists that
I think may be interested.
This is just an RFC. If you all feel it is looking like the right approach
then I'll clean it up and make it a patch.
Thanks,
jaya
am300epd was doing 800*600*16*gpio_set_value for each framebuffer transfer
(it uses 16-pins of gpio as its data bus). I found this caused a wee
performance limitation. This patch adds an API for gpio_set_value_bus
which allows users to set batches of consecutive gpio together in a single
call. I have done a test implementation on gumstix (pxa255) with am300epd
and it provides a nice improvement in performance.
Signed-off-by: Jaya Kumar <jayakumar.lkml@...il.com>
Cc: David Brownell <dbrownell@...rs.sourceforge.net>
Cc: David Brownell <david-b@...bell.net>
Cc: Sam Ravnborg <sam@...nborg.org>
Cc: Jean Delvare <khali@...ux-fr.org>
Cc: Eric Miao <eric.miao@...vell.com>
Cc: Haavard Skinnemoen <hskinnemoen@...el.com>
Cc: Philipp Zabel <philipp.zabel@...il.com>
Cc: Russell King <rmk@....linux.org.uk>
Cc: Ben Gardner <bgardner@...tec.com>
CC: Greg KH <greg@...ah.com>
Cc: linux-arm-kernel@...ts.arm.linux.org.uk
Cc: linux-fbdev-devel@...ts.sourceforge.net
Cc: linux-kernel@...r.kernel.org
---
arch/arm/mach-pxa/am300epd.c | 9 ++++++
arch/arm/mach-pxa/gpio.c | 28 +++++++++++++++++++++
arch/arm/mach-pxa/include/mach/gpio.h | 24 ++++++++++++++++++
drivers/gpio/gpiolib.c | 44 +++++++++++++++++++++++++++++++++
include/asm-generic/gpio.h | 6 ++++
5 files changed, 111 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index bb81564..f741a98 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -222,8 +222,17 @@ static void am300_set_hdb(struct broadsheetfb_par *par, u16 data)
{
int i;
+#if 1
+ gpio_set_value_bus(DB0_GPIO_PIN, data, 16);
+#endif
+#if 0
+ gpio_set_value_bus(DB0_GPIO_PIN, data, 6);
+ gpio_set_value_bus(DB0_GPIO_PIN + 6, data >> 6, 10);
+#endif
+#if 0 /* simple set */
for (i = 0; i <= (DB15_GPIO_PIN - DB0_GPIO_PIN) ; i++)
gpio_set_value(DB0_GPIO_PIN + i, (data >> i) & 0x01);
+#endif
}
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 14930cf..80b0aa1 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -132,6 +132,33 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
}
+/*
+ * Set output GPIO level in batches
+ */
+static void pxa_gpio_set_bus(struct gpio_chip *chip, unsigned offset,
+ int values, int bitwidth)
+{
+ struct pxa_gpio_chip *pxa;
+ int mask;
+
+ /* we're guaranteed by the caller that offset + bitwidth remains
+ * in this chip.
+ */
+ pxa = container_of(chip, struct pxa_gpio_chip, chip);
+
+ mask = ((1 << bitwidth) - 1) << offset;
+ values <<= offset;
+
+ values &= mask;
+ if (values)
+ __raw_writel(values, pxa->regbase + GPSR_OFFSET);
+
+ values = ~values;
+ values &= mask;
+ if (values)
+ __raw_writel(values, pxa->regbase + GPCR_OFFSET);
+}
+
#define GPIO_CHIP(_n) \
[_n] = { \
.regbase = GPIO##_n##_BASE, \
@@ -141,6 +168,7 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
.direction_output = pxa_gpio_direction_output, \
.get = pxa_gpio_get, \
.set = pxa_gpio_set, \
+ .set_bus = pxa_gpio_set_bus, \
.base = (_n) * 32, \
.ngpio = 32, \
}, \
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 2c538d8..6ee92d3 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -56,6 +56,30 @@ static inline void gpio_set_value(unsigned gpio, int value)
}
}
+static inline void gpio_set_value_bus(unsigned gpio, int values, int bitwidth)
+{
+ if (__builtin_constant_p(gpio) &&
+ (gpio + bitwidth < NR_BUILTIN_GPIO) &&
+ ((gpio + bitwidth) <= roundup(gpio+1, 32))) {
+ int shift, mask;
+
+ shift = gpio % 32;
+ mask = ((1 << bitwidth) - 1) << shift;
+ values <<= shift;
+
+ values &= mask;
+ if (values)
+ GPSR(gpio) = values;
+
+ values = ~values;
+ values &= mask;
+ if (values)
+ GPCR(gpio) = values;
+ } else {
+ __gpio_set_value_bus(gpio, values, bitwidth);
+ }
+}
+
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9112830..fddf3af 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1057,6 +1057,50 @@ void __gpio_set_value(unsigned gpio, int value)
EXPORT_SYMBOL_GPL(__gpio_set_value);
/**
+ * __gpio_set_value_bus() - assign a batch of consecutive gpio pins together
+ * @gpio: starting gpio pin
+ * @values: values to assign, sequential in host ordering
+ * @bitwidth: total width of bits to be assigned
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_set_value().
+ * It invokes the associated gpio_chip.set() method.
+ */
+void __gpio_set_value_bus(unsigned gpio, int values, int bitwidth)
+{
+ struct gpio_chip *chip;
+ int i = 0;
+ int value, width, remwidth;
+
+ do {
+ chip = gpio_to_chip(gpio + i);
+ WARN_ON(extra_checks && chip->can_sleep);
+
+ if (!chip->set_bus) {
+ while (((gpio + i) < (chip->base + chip->ngpio))
+ && bitwidth) {
+ value = values & (1 << i);
+ chip->set(chip, gpio + i - chip->base, value);
+ i++;
+ bitwidth--;
+ }
+ } else {
+ value = values >> i; /* shift off the used stuff */
+ remwidth = ((chip->base + (int) chip->ngpio) -
+ ((int) gpio + i));
+ width = min(bitwidth, remwidth);
+
+ chip->set_bus(chip, gpio + i - chip->base, value,
+ width);
+ i += width;
+ bitwidth -= width;
+ }
+ } while (bitwidth);
+}
+EXPORT_SYMBOL_GPL(__gpio_set_value_bus);
+
+
+/**
* __gpio_cansleep() - report whether gpio value access will sleep
* @gpio: gpio in question
* Context: any
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 81797ec..9747517 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -44,6 +44,8 @@ struct module;
* returns either the value actually sensed, or zero
* @direction_output: configures signal "offset" as output, or returns error
* @set: assigns output value for signal "offset"
+ * @set_bus: batch assigns output values for consecutive signals starting at
+ * "offset" with width in bits "bitwidth"
* @to_irq: optional hook supporting non-static gpio_to_irq() mappings;
* implementation may not sleep
* @dbg_show: optional routine to show contents in debugfs; default code
@@ -84,6 +86,9 @@ struct gpio_chip {
unsigned offset, int value);
void (*set)(struct gpio_chip *chip,
unsigned offset, int value);
+ void (*set_bus)(struct gpio_chip *chip,
+ unsigned offset, int values,
+ int bitwidth);
int (*to_irq)(struct gpio_chip *chip,
unsigned offset);
@@ -124,6 +129,7 @@ extern void gpio_set_value_cansleep(unsigned gpio, int value);
*/
extern int __gpio_get_value(unsigned gpio);
extern void __gpio_set_value(unsigned gpio, int value);
+extern void __gpio_set_value_bus(unsigned gpio, int values, int bitwidth);
extern int __gpio_cansleep(unsigned gpio);
--
1.5.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists