linux-kernel - Re: Regression on VIA C3 motherboard, commit: 66f2173e2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <498C4D47.4040201@gmail.com>
Date:	Fri, 06 Feb 2009 08:46:31 -0600
From:	Robert Hancock <hancockrwd@...il.com>
To:	Ben Greear <greearb@...delatech.com>
CC:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Len Brown <len.brown@...el.com>
Subject: Re: Regression on VIA C3 motherboard, commit: 66f2173e2

Ben Greear wrote:
> Robert Hancock wrote:
>> Ben Greear wrote:
>>> I have a via motherboard with C3 processor and some real-tek NICs.  I 
>>> noticed
>>> when using the top-of-tree that performance on it sucked (30Mbps v/s 
>>> 54Mbps
>>> network throughput in one pertinent test).
>>>
>>> After several hours of bisecting, I see this as the culprit:
>>>
>>> 7b37b5fd9ba32c0c5afc3537eed7e7466f2173e2 is first bad commit
>>> commit 7b37b5fd9ba32c0c5afc3537eed7e7466f2173e2
>>> Author: Len Brown <len.brown@...el.com>
>>> Date:   Tue Dec 23 01:47:42 2008 -0500
>>>
>>>    ACPI: disable MPS when NO APIC-table found
>>>      When ACPI is asked to find an MADT (APIC table)
>>>    and fails, then ACPI expects to run in PIC mode.
>>>      However, if an MP Table is was found, IRQs will be
>>>    registered as if an IOAPIC is being used, even
>>>    though ACPI is configuring interrupt links links for PIC mode.
>>>      In this scenario, disable MPS so that IRQs
>>>    are registered in PIC mode, consistent with ACPI.
>>>      http://bugzilla.kernel.org/show_bug.cgi?id=12257
>>>      Signed-off-by: Len Brown <len.brown@...el.com>
>>>
>>> :040000 040000 86ce74daee3a9fe6ff21ef7f8fb364af23ec0c1e 
>>> 364933dfec0df34e63b1aeff6aff4092d421886b M      arch
>>>
>>>
>>> In addition, I see this warning in my logs, which is likely the symptom:
>>>
>>> ACPI Exception (tbxface-0627): AE_NO_ACPI_TABLES, While loading 
>>> namespace from ACPI tables ]
>>> ACPI: Unable to load the System Description Tables
>>
>> You're getting this on boot:
>>
>> ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926]
>>
>> That essentially means ACPI isn't working at all, I think. Did 
>> previous kernels produce this error? Do you have ACPI disabled in the 
>> BIOS or something?
>>
> Er, yes...I have ACPI disabled in the BIOS.  I seem to recall now that 
> it worked around
> some instability, but it's been a few years since we set that up.   
> Still, it was working
> fine before, and fine again when I comment out the change in this commit 
> (and another
> change to force the 'tsc' to be considered stable).
> 
> The same error message happens as far back as 2.6.25 at least.

It seems like this is a slightly different case than the patch is trying 
to address. It's talking about just the MADT not being found, when in 
your case we have no ACPI at all.

However, I should point out that in general, disabling ACPI tends to be 
a bad idea, since it tends to bring out untested code paths both in the 
kernel and in the BIOS/hardware. (For one thing it means you can't use 
the PM timer, which is likely why your system is falling back to jiffies 
timing.)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/