| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <18864.61044.728501.519462@cargo.ozlabs.ibm.com>
Date: Fri, 6 Mar 2009 20:35:48 +1100
From: Paul Mackerras <paulus@...ba.org>
To: Ingo Molnar <mingo@...e.hu>
CC: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>
Subject: [PATCH 2/3] perfcounters/powerpc: add support for POWER5+ processors
Impact: more hardware support
This adds the back-end for the PMU on the POWER5+ processors (i.e. GS,
including GS DD3 aka POWER5++). This doesn't use the fixed-function
PMC5 and PMC6 since they don't respect the freeze conditions and don't
generate interrupts, as on POWER6.
Signed-off-by: Paul Mackerras <paulus@...ba.org>
---
arch/powerpc/kernel/Makefile | 4 +-
arch/powerpc/kernel/perf_counter.c | 4 +
arch/powerpc/kernel/power5+-pmu.c | 452 ++++++++++++++++++++++++++++++++++++
3 files changed, 458 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/kernel/power5+-pmu.c
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b4c6f46..49851e0 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -94,8 +94,8 @@ obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o ppc970-pmu.o power5-pmu.o \
- power6-pmu.o
+obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o ppc970-pmu.o \
+ power5-pmu.o power5+-pmu.o power6-pmu.o
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 4fec112..162f398 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -826,6 +826,7 @@ void hw_perf_counter_setup(int cpu)
extern struct power_pmu ppc970_pmu;
extern struct power_pmu power5_pmu;
+extern struct power_pmu power5p_pmu;
extern struct power_pmu power6_pmu;
static int init_perf_counters(void)
@@ -848,6 +849,9 @@ static int init_perf_counters(void)
case PV_POWER5:
ppmu = &power5_pmu;
break;
+ case PV_POWER5p:
+ ppmu = &power5p_pmu;
+ break;
case 0x3e:
ppmu = &power6_pmu;
break;
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
new file mode 100644
index 0000000..cec21ea
--- /dev/null
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -0,0 +1,452 @@
+/*
+ * Performance counter support for POWER5 (not POWER5++) processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER5+ (POWER5 GS) and POWER5++ (POWER5 GS DD3)
+ */
+#define PM_PMC_SH 20 /* PMC number (1-based) for direct events */
+#define PM_PMC_MSK 0xf
+#define PM_PMC_MSKS (PM_PMC_MSK << PM_PMC_SH)
+#define PM_UNIT_SH 16 /* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK 0xf
+#define PM_BYTE_SH 12 /* Byte number of event bus to use */
+#define PM_BYTE_MSK 7
+#define PM_GRS_SH 8 /* Storage subsystem mux select */
+#define PM_GRS_MSK 7
+#define PM_BUSEVENT_MSK 0x80 /* Set if event uses event bus */
+#define PM_PMCSEL_MSK 0x7f
+
+/* Values in PM_UNIT field */
+#define PM_FPU 0
+#define PM_ISU0 1
+#define PM_IFU 2
+#define PM_ISU1 3
+#define PM_IDU 4
+#define PM_ISU0_ALT 6
+#define PM_GRS 7
+#define PM_LSU0 8
+#define PM_LSU1 0xc
+#define PM_LASTUNIT 0xc
+
+/*
+ * Bits in MMCR1 for POWER5+
+ */
+#define MMCR1_TTM0SEL_SH 62
+#define MMCR1_TTM1SEL_SH 60
+#define MMCR1_TTM2SEL_SH 58
+#define MMCR1_TTM3SEL_SH 56
+#define MMCR1_TTMSEL_MSK 3
+#define MMCR1_TD_CP_DBG0SEL_SH 54
+#define MMCR1_TD_CP_DBG1SEL_SH 52
+#define MMCR1_TD_CP_DBG2SEL_SH 50
+#define MMCR1_TD_CP_DBG3SEL_SH 48
+#define MMCR1_GRS_L2SEL_SH 46
+#define MMCR1_GRS_L2SEL_MSK 3
+#define MMCR1_GRS_L3SEL_SH 44
+#define MMCR1_GRS_L3SEL_MSK 3
+#define MMCR1_GRS_MCSEL_SH 41
+#define MMCR1_GRS_MCSEL_MSK 7
+#define MMCR1_GRS_FABSEL_SH 39
+#define MMCR1_GRS_FABSEL_MSK 3
+#define MMCR1_PMC1_ADDER_SEL_SH 35
+#define MMCR1_PMC2_ADDER_SEL_SH 34
+#define MMCR1_PMC3_ADDER_SEL_SH 33
+#define MMCR1_PMC4_ADDER_SEL_SH 32
+#define MMCR1_PMC1SEL_SH 25
+#define MMCR1_PMC2SEL_SH 17
+#define MMCR1_PMC3SEL_SH 9
+#define MMCR1_PMC4SEL_SH 1
+#define MMCR1_PMCSEL_SH(n) (MMCR1_PMC1SEL_SH - (n) * 8)
+#define MMCR1_PMCSEL_MSK 0x7f
+
+/*
+ * Bits in MMCRA
+ */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ * [ ><><>< ><> <><>[ > < >< >< >< ><><><><>
+ * NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P4P3P2P1
+ *
+ * NC - number of counters
+ * 51: NC error 0x0008_0000_0000_0000
+ * 48-50: number of events needing PMC1-4 0x0007_0000_0000_0000
+ *
+ * G0..G3 - GRS mux constraints
+ * 46-47: GRS_L2SEL value
+ * 44-45: GRS_L3SEL value
+ * 41-44: GRS_MCSEL value
+ * 39-40: GRS_FABSEL value
+ * Note that these match up with their bit positions in MMCR1
+ *
+ * T0 - TTM0 constraint
+ * 36-37: TTM0SEL value (0=FPU, 2=IFU, 3=ISU1) 0x30_0000_0000
+ *
+ * T1 - TTM1 constraint
+ * 34-35: TTM1SEL value (0=IDU, 3=GRS) 0x0c_0000_0000
+ *
+ * UC - unit constraint: can't have all three of FPU|IFU|ISU1, ISU0, IDU|GRS
+ * 33: UC3 error 0x02_0000_0000
+ * 32: FPU|IFU|ISU1 events needed 0x01_0000_0000
+ * 31: ISU0 events needed 0x01_8000_0000
+ * 30: IDU|GRS events needed 0x00_4000_0000
+ *
+ * B0
+ * 20-23: Byte 0 event source 0x00f0_0000
+ * Encoding as for the event code
+ *
+ * B1, B2, B3
+ * 16-19, 12-15, 8-11: Byte 1, 2, 3 event sources
+ *
+ * P4
+ * 7: P1 error 0x80
+ * 6-7: Count of events needing PMC4
+ *
+ * P1..P3
+ * 0-6: Count of events needing PMC1..PMC3
+ */
+
+static const int grsel_shift[8] = {
+ MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH, MMCR1_GRS_L2SEL_SH,
+ MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH, MMCR1_GRS_L3SEL_SH,
+ MMCR1_GRS_MCSEL_SH, MMCR1_GRS_FABSEL_SH
+};
+
+/* Masks and values for using events from the various units */
+static u64 unit_cons[PM_LASTUNIT+1][2] = {
+ [PM_FPU] = { 0x3200000000ull, 0x0100000000ull },
+ [PM_ISU0] = { 0x0200000000ull, 0x0080000000ull },
+ [PM_ISU1] = { 0x3200000000ull, 0x3100000000ull },
+ [PM_IFU] = { 0x3200000000ull, 0x2100000000ull },
+ [PM_IDU] = { 0x0e00000000ull, 0x0040000000ull },
+ [PM_GRS] = { 0x0e00000000ull, 0x0c40000000ull },
+};
+
+static int power5p_get_constraint(unsigned int event, u64 *maskp, u64 *valp)
+{
+ int pmc, byte, unit, sh;
+ int bit, fmask;
+ u64 mask = 0, value = 0;
+
+ pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+ if (pmc) {
+ if (pmc > 4)
+ return -1;
+ sh = (pmc - 1) * 2;
+ mask |= 2 << sh;
+ value |= 1 << sh;
+ }
+ if (event & PM_BUSEVENT_MSK) {
+ unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+ if (unit > PM_LASTUNIT)
+ return -1;
+ if (unit == PM_ISU0_ALT)
+ unit = PM_ISU0;
+ mask |= unit_cons[unit][0];
+ value |= unit_cons[unit][1];
+ byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+ if (byte >= 4) {
+ if (unit != PM_LSU1)
+ return -1;
+ /* Map LSU1 low word (bytes 4-7) to unit LSU1+1 */
+ ++unit;
+ byte &= 3;
+ }
+ if (unit == PM_GRS) {
+ bit = event & 7;
+ fmask = (bit == 6)? 7: 3;
+ sh = grsel_shift[bit];
+ mask |= (u64)fmask << sh;
+ value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
+ }
+ /* Set byte lane select field */
+ mask |= 0xfULL << (20 - 4 * byte);
+ value |= (u64)unit << (20 - 4 * byte);
+ }
+ mask |= 0x8000000000000ull;
+ value |= 0x1000000000000ull;
+ *maskp = mask;
+ *valp = value;
+ return 0;
+}
+
+#define MAX_ALT 3 /* at most 3 alternatives for any event */
+
+static const unsigned int event_alternatives[][MAX_ALT] = {
+ { 0x100c0, 0x40001f }, /* PM_GCT_FULL_CYC */
+ { 0x120e4, 0x400002 }, /* PM_GRP_DISP_REJECT */
+ { 0x230e2, 0x323087 }, /* PM_BR_PRED_CR */
+ { 0x230e3, 0x223087, 0x3230a0 }, /* PM_BR_PRED_TA */
+ { 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */
+ { 0x800c4, 0xc20e0 }, /* PM_DTLB_MISS */
+ { 0xc50c6, 0xc60e0 }, /* PM_MRK_DTLB_MISS */
+ { 0x100009, 0x200009 }, /* PM_INST_CMPL */
+ { 0x200015, 0x300015 }, /* PM_LSU_LMQ_SRQ_EMPTY_CYC */
+ { 0x300009, 0x400009 }, /* PM_INST_DISP */
+};
+
+/*
+ * Scan the alternatives table for a match and return the
+ * index into the alternatives table if found, else -1.
+ */
+static int find_alternative(unsigned int event)
+{
+ int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(event_alternatives); ++i) {
+ if (event < event_alternatives[i][0])
+ break;
+ for (j = 0; j < MAX_ALT && event_alternatives[i][j]; ++j)
+ if (event == event_alternatives[i][j])
+ return i;
+ }
+ return -1;
+}
+
+static const unsigned char bytedecode_alternatives[4][4] = {
+ /* PMC 1 */ { 0x21, 0x23, 0x25, 0x27 },
+ /* PMC 2 */ { 0x07, 0x17, 0x0e, 0x1e },
+ /* PMC 3 */ { 0x20, 0x22, 0x24, 0x26 },
+ /* PMC 4 */ { 0x07, 0x17, 0x0e, 0x1e }
+};
+
+/*
+ * Some direct events for decodes of event bus byte 3 have alternative
+ * PMCSEL values on other counters. This returns the alternative
+ * event code for those that do, or -1 otherwise. This also handles
+ * alternative PCMSEL values for add events.
+ */
+static int find_alternative_bdecode(unsigned int event)
+{
+ int pmc, altpmc, pp, j;
+
+ pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+ if (pmc == 0 || pmc > 4)
+ return -1;
+ altpmc = 5 - pmc; /* 1 <-> 4, 2 <-> 3 */
+ pp = event & PM_PMCSEL_MSK;
+ for (j = 0; j < 4; ++j) {
+ if (bytedecode_alternatives[pmc - 1][j] == pp) {
+ return (event & ~(PM_PMC_MSKS | PM_PMCSEL_MSK)) |
+ (altpmc << PM_PMC_SH) |
+ bytedecode_alternatives[altpmc - 1][j];
+ }
+ }
+
+ /* new decode alternatives for power5+ */
+ if (pmc == 1 && (pp == 0x0d || pp == 0x0e))
+ return event + (2 << PM_PMC_SH) + (0x2e - 0x0d);
+ if (pmc == 3 && (pp == 0x2e || pp == 0x2f))
+ return event - (2 << PM_PMC_SH) - (0x2e - 0x0d);
+
+ /* alternative add event encodings */
+ if (pp == 0x10 || pp == 0x28)
+ return ((event ^ (0x10 ^ 0x28)) & ~PM_PMC_MSKS) |
+ (altpmc << PM_PMC_SH);
+
+ return -1;
+}
+
+static int power5p_get_alternatives(unsigned int event, unsigned int alt[])
+{
+ int i, j, ae, nalt = 1;
+
+ alt[0] = event;
+ nalt = 1;
+ i = find_alternative(event);
+ if (i >= 0) {
+ for (j = 0; j < MAX_ALT; ++j) {
+ ae = event_alternatives[i][j];
+ if (ae && ae != event)
+ alt[nalt++] = ae;
+ }
+ } else {
+ ae = find_alternative_bdecode(event);
+ if (ae > 0)
+ alt[nalt++] = ae;
+ }
+ return nalt;
+}
+
+static int power5p_compute_mmcr(unsigned int event[], int n_ev,
+ unsigned int hwc[], u64 mmcr[])
+{
+ u64 mmcr1 = 0;
+ unsigned int pmc, unit, byte, psel;
+ unsigned int ttm;
+ int i, isbus, bit, grsel;
+ unsigned int pmc_inuse = 0;
+ unsigned char busbyte[4];
+ unsigned char unituse[16];
+ int ttmuse;
+
+ if (n_ev > 4)
+ return -1;
+
+ /* First pass to count resource use */
+ memset(busbyte, 0, sizeof(busbyte));
+ memset(unituse, 0, sizeof(unituse));
+ for (i = 0; i < n_ev; ++i) {
+ pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+ if (pmc) {
+ if (pmc > 4)
+ return -1;
+ if (pmc_inuse & (1 << (pmc - 1)))
+ return -1;
+ pmc_inuse |= 1 << (pmc - 1);
+ }
+ if (event[i] & PM_BUSEVENT_MSK) {
+ unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+ byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+ if (unit > PM_LASTUNIT)
+ return -1;
+ if (unit == PM_ISU0_ALT)
+ unit = PM_ISU0;
+ if (byte >= 4) {
+ if (unit != PM_LSU1)
+ return -1;
+ ++unit;
+ byte &= 3;
+ }
+ if (busbyte[byte] && busbyte[byte] != unit)
+ return -1;
+ busbyte[byte] = unit;
+ unituse[unit] = 1;
+ }
+ }
+
+ /*
+ * Assign resources and set multiplexer selects.
+ *
+ * PM_ISU0 can go either on TTM0 or TTM1, but that's the only
+ * choice we have to deal with.
+ */
+ if (unituse[PM_ISU0] &
+ (unituse[PM_FPU] | unituse[PM_IFU] | unituse[PM_ISU1])) {
+ unituse[PM_ISU0_ALT] = 1; /* move ISU to TTM1 */
+ unituse[PM_ISU0] = 0;
+ }
+ /* Set TTM[01]SEL fields. */
+ ttmuse = 0;
+ for (i = PM_FPU; i <= PM_ISU1; ++i) {
+ if (!unituse[i])
+ continue;
+ if (ttmuse++)
+ return -1;
+ mmcr1 |= (u64)i << MMCR1_TTM0SEL_SH;
+ }
+ ttmuse = 0;
+ for (; i <= PM_GRS; ++i) {
+ if (!unituse[i])
+ continue;
+ if (ttmuse++)
+ return -1;
+ mmcr1 |= (u64)(i & 3) << MMCR1_TTM1SEL_SH;
+ }
+ if (ttmuse > 1)
+ return -1;
+
+ /* Set byte lane select fields, TTM[23]SEL and GRS_*SEL. */
+ for (byte = 0; byte < 4; ++byte) {
+ unit = busbyte[byte];
+ if (!unit)
+ continue;
+ if (unit == PM_ISU0 && unituse[PM_ISU0_ALT]) {
+ /* get ISU0 through TTM1 rather than TTM0 */
+ unit = PM_ISU0_ALT;
+ } else if (unit == PM_LSU1 + 1) {
+ /* select lower word of LSU1 for this byte */
+ mmcr1 |= 1ull << (MMCR1_TTM3SEL_SH + 3 - byte);
+ }
+ ttm = unit >> 2;
+ mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2 * byte);
+ }
+
+ /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+ for (i = 0; i < n_ev; ++i) {
+ pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+ unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+ byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+ psel = event[i] & PM_PMCSEL_MSK;
+ isbus = event[i] & PM_BUSEVENT_MSK;
+ if (!pmc) {
+ /* Bus event or any-PMC direct event */
+ for (pmc = 0; pmc < 4; ++pmc) {
+ if (!(pmc_inuse & (1 << pmc)))
+ break;
+ }
+ if (pmc >= 4)
+ return -1;
+ pmc_inuse |= 1 << pmc;
+ } else {
+ /* Direct event */
+ --pmc;
+ if (isbus && (byte & 2) &&
+ (psel == 8 || psel == 0x10 || psel == 0x28))
+ /* add events on higher-numbered bus */
+ mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+ }
+ if (isbus && unit == PM_GRS) {
+ bit = psel & 7;
+ grsel = (event[i] >> PM_GRS_SH) & PM_GRS_MSK;
+ mmcr1 |= (u64)grsel << grsel_shift[bit];
+ }
+ if ((psel & 0x58) == 0x40 && (byte & 1) != ((pmc >> 1) & 1))
+ /* select alternate byte lane */
+ psel |= 0x10;
+ if (pmc <= 3)
+ mmcr1 |= psel << MMCR1_PMCSEL_SH(pmc);
+ hwc[i] = pmc;
+ }
+
+ /* Return MMCRx values */
+ mmcr[0] = 0;
+ if (pmc_inuse & 1)
+ mmcr[0] = MMCR0_PMC1CE;
+ if (pmc_inuse & 0x3e)
+ mmcr[0] |= MMCR0_PMCjCE;
+ mmcr[1] = mmcr1;
+ mmcr[2] = 0;
+ return 0;
+}
+
+static void power5p_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+ if (pmc <= 3)
+ mmcr[1] &= ~(0x7fUL << MMCR1_PMCSEL_SH(pmc));
+}
+
+static int power5p_generic_events[] = {
+ [PERF_COUNT_CPU_CYCLES] = 0xf,
+ [PERF_COUNT_INSTRUCTIONS] = 0x100009,
+ [PERF_COUNT_CACHE_REFERENCES] = 0x1c10a8, /* LD_REF_L1 */
+ [PERF_COUNT_CACHE_MISSES] = 0x3c1088, /* LD_MISS_L1 */
+ [PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x230e4, /* BR_ISSUED */
+ [PERF_COUNT_BRANCH_MISSES] = 0x230e5, /* BR_MPRED_CR */
+};
+
+struct power_pmu power5p_pmu = {
+ .n_counter = 4,
+ .max_alternatives = MAX_ALT,
+ .add_fields = 0x7000000000055ull,
+ .test_adder = 0x3000040000000ull,
+ .compute_mmcr = power5p_compute_mmcr,
+ .get_constraint = power5p_get_constraint,
+ .get_alternatives = power5p_get_alternatives,
+ .disable_pmc = power5p_disable_pmc,
+ .n_generic = ARRAY_SIZE(power5p_generic_events),
+ .generic_events = power5p_generic_events,
+};
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists