| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <18864.61051.120576.533617@cargo.ozlabs.ibm.com>
Date: Fri, 6 Mar 2009 20:35:55 +1100
From: Paul Mackerras <paulus@...ba.org>
To: Ingo Molnar <mingo@...e.hu>
CC: linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>
Subject: [PATCH 3/3] perfcounters/powerpc: add support for POWER4 processors
Impact: more hardware support
This adds the back-end for the PMU on the POWER4 and POWER4+ processors
(GP and GQ). This is quite similar to the PPC970, with 8 PMCs, but has
fewer events than the PPC970.
Signed-off-by: Paul Mackerras <paulus@...ba.org>
---
arch/powerpc/kernel/Makefile | 2 +-
arch/powerpc/kernel/perf_counter.c | 5 +
arch/powerpc/kernel/power4-pmu.c | 557 ++++++++++++++++++++++++++++++++++++
3 files changed, 563 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/kernel/power4-pmu.c
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 49851e0..8e5e2c7 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -94,7 +94,7 @@ obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o ppc970-pmu.o \
+obj-$(CONFIG_PERF_COUNTERS) += perf_counter.o power4-pmu.o ppc970-pmu.o \
power5-pmu.o power5+-pmu.o power6-pmu.o
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 162f398..0e33d27 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -824,6 +824,7 @@ void hw_perf_counter_setup(int cpu)
cpuhw->mmcr[0] = MMCR0_FC;
}
+extern struct power_pmu power4_pmu;
extern struct power_pmu ppc970_pmu;
extern struct power_pmu power5_pmu;
extern struct power_pmu power5p_pmu;
@@ -841,6 +842,10 @@ static int init_perf_counters(void)
/* XXX should get this from cputable */
pvr = mfspr(SPRN_PVR);
switch (PVR_VER(pvr)) {
+ case PV_POWER4:
+ case PV_POWER4p:
+ ppmu = &power4_pmu;
+ break;
case PV_970:
case PV_970FX:
case PV_970MP:
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
new file mode 100644
index 0000000..1407b19
--- /dev/null
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -0,0 +1,557 @@
+/*
+ * Performance counter support for POWER4 (GP) and POWER4+ (GQ) processors.
+ *
+ * Copyright 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/perf_counter.h>
+#include <asm/reg.h>
+
+/*
+ * Bits in event code for POWER4
+ */
+#define PM_PMC_SH 12 /* PMC number (1-based) for direct events */
+#define PM_PMC_MSK 0xf
+#define PM_UNIT_SH 8 /* TTMMUX number and setting - unit select */
+#define PM_UNIT_MSK 0xf
+#define PM_LOWER_SH 6
+#define PM_LOWER_MSK 1
+#define PM_LOWER_MSKS 0x40
+#define PM_BYTE_SH 4 /* Byte number of event bus to use */
+#define PM_BYTE_MSK 3
+#define PM_PMCSEL_MSK 7
+
+/*
+ * Unit code values
+ */
+#define PM_FPU 1
+#define PM_ISU1 2
+#define PM_IFU 3
+#define PM_IDU0 4
+#define PM_ISU1_ALT 6
+#define PM_ISU2 7
+#define PM_IFU_ALT 8
+#define PM_LSU0 9
+#define PM_LSU1 0xc
+#define PM_GPS 0xf
+
+/*
+ * Bits in MMCR0 for POWER4
+ */
+#define MMCR0_PMC1SEL_SH 8
+#define MMCR0_PMC2SEL_SH 1
+#define MMCR_PMCSEL_MSK 0x1f
+
+/*
+ * Bits in MMCR1 for POWER4
+ */
+#define MMCR1_TTM0SEL_SH 62
+#define MMCR1_TTC0SEL_SH 61
+#define MMCR1_TTM1SEL_SH 59
+#define MMCR1_TTC1SEL_SH 58
+#define MMCR1_TTM2SEL_SH 56
+#define MMCR1_TTC2SEL_SH 55
+#define MMCR1_TTM3SEL_SH 53
+#define MMCR1_TTC3SEL_SH 52
+#define MMCR1_TTMSEL_MSK 3
+#define MMCR1_TD_CP_DBG0SEL_SH 50
+#define MMCR1_TD_CP_DBG1SEL_SH 48
+#define MMCR1_TD_CP_DBG2SEL_SH 46
+#define MMCR1_TD_CP_DBG3SEL_SH 44
+#define MMCR1_DEBUG0SEL_SH 43
+#define MMCR1_DEBUG1SEL_SH 42
+#define MMCR1_DEBUG2SEL_SH 41
+#define MMCR1_DEBUG3SEL_SH 40
+#define MMCR1_PMC1_ADDER_SEL_SH 39
+#define MMCR1_PMC2_ADDER_SEL_SH 38
+#define MMCR1_PMC6_ADDER_SEL_SH 37
+#define MMCR1_PMC5_ADDER_SEL_SH 36
+#define MMCR1_PMC8_ADDER_SEL_SH 35
+#define MMCR1_PMC7_ADDER_SEL_SH 34
+#define MMCR1_PMC3_ADDER_SEL_SH 33
+#define MMCR1_PMC4_ADDER_SEL_SH 32
+#define MMCR1_PMC3SEL_SH 27
+#define MMCR1_PMC4SEL_SH 22
+#define MMCR1_PMC5SEL_SH 17
+#define MMCR1_PMC6SEL_SH 12
+#define MMCR1_PMC7SEL_SH 7
+#define MMCR1_PMC8SEL_SH 2 /* note bit 0 is in MMCRA for GP */
+
+static short mmcr1_adder_bits[8] = {
+ MMCR1_PMC1_ADDER_SEL_SH,
+ MMCR1_PMC2_ADDER_SEL_SH,
+ MMCR1_PMC3_ADDER_SEL_SH,
+ MMCR1_PMC4_ADDER_SEL_SH,
+ MMCR1_PMC5_ADDER_SEL_SH,
+ MMCR1_PMC6_ADDER_SEL_SH,
+ MMCR1_PMC7_ADDER_SEL_SH,
+ MMCR1_PMC8_ADDER_SEL_SH
+};
+
+/*
+ * Bits in MMCRA
+ */
+#define MMCRA_PMC8SEL0_SH 17 /* PMC8SEL bit 0 for GP */
+
+/*
+ * Layout of constraint bits:
+ * 6666555555555544444444443333333333222222222211111111110000000000
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ * |[ >[ >[ >|||[ >[ >< >< >< >< ><><><><><><><><>
+ * | UC1 UC2 UC3 ||| PS1 PS2 B0 B1 B2 B3 P1P2P3P4P5P6P7P8
+ * \SMPL ||\TTC3SEL
+ * |\TTC_IFU_SEL
+ * \TTM2SEL0
+ *
+ * SMPL - SAMPLE_ENABLE constraint
+ * 56: SAMPLE_ENABLE value 0x0100_0000_0000_0000
+ *
+ * UC1 - unit constraint 1: can't have all three of FPU/ISU1/IDU0|ISU2
+ * 55: UC1 error 0x0080_0000_0000_0000
+ * 54: FPU events needed 0x0040_0000_0000_0000
+ * 53: ISU1 events needed 0x0020_0000_0000_0000
+ * 52: IDU0|ISU2 events needed 0x0010_0000_0000_0000
+ *
+ * UC2 - unit constraint 2: can't have all three of FPU/IFU/LSU0
+ * 51: UC2 error 0x0008_0000_0000_0000
+ * 50: FPU events needed 0x0004_0000_0000_0000
+ * 49: IFU events needed 0x0002_0000_0000_0000
+ * 48: LSU0 events needed 0x0001_0000_0000_0000
+ *
+ * UC3 - unit constraint 3: can't have all four of LSU0/IFU/IDU0|ISU2/ISU1
+ * 47: UC3 error 0x8000_0000_0000
+ * 46: LSU0 events needed 0x4000_0000_0000
+ * 45: IFU events needed 0x2000_0000_0000
+ * 44: IDU0|ISU2 events needed 0x1000_0000_0000
+ * 43: ISU1 events needed 0x0800_0000_0000
+ *
+ * TTM2SEL0
+ * 42: 0 = IDU0 events needed
+ * 1 = ISU2 events needed 0x0400_0000_0000
+ *
+ * TTC_IFU_SEL
+ * 41: 0 = IFU.U events needed
+ * 1 = IFU.L events needed 0x0200_0000_0000
+ *
+ * TTC3SEL
+ * 40: 0 = LSU1.U events needed
+ * 1 = LSU1.L events needed 0x0100_0000_0000
+ *
+ * PS1
+ * 39: PS1 error 0x0080_0000_0000
+ * 36-38: count of events needing PMC1/2/5/6 0x0070_0000_0000
+ *
+ * PS2
+ * 35: PS2 error 0x0008_0000_0000
+ * 32-34: count of events needing PMC3/4/7/8 0x0007_0000_0000
+ *
+ * B0
+ * 28-31: Byte 0 event source 0xf000_0000
+ * 1 = FPU
+ * 2 = ISU1
+ * 3 = IFU
+ * 4 = IDU0
+ * 7 = ISU2
+ * 9 = LSU0
+ * c = LSU1
+ * f = GPS
+ *
+ * B1, B2, B3
+ * 24-27, 20-23, 16-19: Byte 1, 2, 3 event sources
+ *
+ * P8
+ * 15: P8 error 0x8000
+ * 14-15: Count of events needing PMC8
+ *
+ * P1..P7
+ * 0-13: Count of events needing PMC1..PMC7
+ *
+ * Note: this doesn't allow events using IFU.U to be combined with events
+ * using IFU.L, though that is feasible (using TTM0 and TTM2). However
+ * there are no listed events for IFU.L (they are debug events not
+ * verified for performance monitoring) so this shouldn't cause a
+ * problem.
+ */
+
+static struct unitinfo {
+ u64 value, mask;
+ int unit;
+ int lowerbit;
+} p4_unitinfo[16] = {
+ [PM_FPU] = { 0x44000000000000ull, 0x88000000000000ull, PM_FPU, 0 },
+ [PM_ISU1] = { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
+ [PM_ISU1_ALT] =
+ { 0x20080000000000ull, 0x88000000000000ull, PM_ISU1, 0 },
+ [PM_IFU] = { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
+ [PM_IFU_ALT] =
+ { 0x02200000000000ull, 0x08820000000000ull, PM_IFU, 41 },
+ [PM_IDU0] = { 0x10100000000000ull, 0x80840000000000ull, PM_IDU0, 1 },
+ [PM_ISU2] = { 0x10140000000000ull, 0x80840000000000ull, PM_ISU2, 0 },
+ [PM_LSU0] = { 0x01400000000000ull, 0x08800000000000ull, PM_LSU0, 0 },
+ [PM_LSU1] = { 0x00000000000000ull, 0x00010000000000ull, PM_LSU1, 40 },
+ [PM_GPS] = { 0x00000000000000ull, 0x00000000000000ull, PM_GPS, 0 }
+};
+
+static unsigned char direct_marked_event[8] = {
+ (1<<2) | (1<<3), /* PMC1: PM_MRK_GRP_DISP, PM_MRK_ST_CMPL */
+ (1<<3) | (1<<5), /* PMC2: PM_THRESH_TIMEO, PM_MRK_BRU_FIN */
+ (1<<3), /* PMC3: PM_MRK_ST_CMPL_INT */
+ (1<<4) | (1<<5), /* PMC4: PM_MRK_GRP_CMPL, PM_MRK_CRU_FIN */
+ (1<<4) | (1<<5), /* PMC5: PM_MRK_GRP_TIMEO */
+ (1<<3) | (1<<4) | (1<<5),
+ /* PMC6: PM_MRK_ST_GPS, PM_MRK_FXU_FIN, PM_MRK_GRP_ISSUED */
+ (1<<4) | (1<<5), /* PMC7: PM_MRK_FPU_FIN, PM_MRK_INST_FIN */
+ (1<<4), /* PMC8: PM_MRK_LSU_FIN */
+};
+
+/*
+ * Returns 1 if event counts things relating to marked instructions
+ * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not.
+ */
+static int p4_marked_instr_event(unsigned int event)
+{
+ int pmc, psel, unit, byte, bit;
+ unsigned int mask;
+
+ pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+ psel = event & PM_PMCSEL_MSK;
+ if (pmc) {
+ if (direct_marked_event[pmc - 1] & (1 << psel))
+ return 1;
+ if (psel == 0) /* add events */
+ bit = (pmc <= 4)? pmc - 1: 8 - pmc;
+ else if (psel == 6) /* decode events */
+ bit = 4;
+ else
+ return 0;
+ } else
+ bit = psel;
+
+ byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+ unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+ mask = 0;
+ switch (unit) {
+ case PM_LSU1:
+ if (event & PM_LOWER_MSKS)
+ mask = 1 << 28; /* byte 7 bit 4 */
+ else
+ mask = 6 << 24; /* byte 3 bits 1 and 2 */
+ break;
+ case PM_LSU0:
+ /* byte 3, bit 3; byte 2 bits 0,2,3,4,5; byte 1 */
+ mask = 0x083dff00;
+ }
+ return (mask >> (byte * 8 + bit)) & 1;
+}
+
+static int p4_get_constraint(unsigned int event, u64 *maskp, u64 *valp)
+{
+ int pmc, byte, unit, lower, sh;
+ u64 mask = 0, value = 0;
+ int grp = -1;
+
+ pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+ if (pmc) {
+ if (pmc > 8)
+ return -1;
+ sh = (pmc - 1) * 2;
+ mask |= 2 << sh;
+ value |= 1 << sh;
+ grp = ((pmc - 1) >> 1) & 1;
+ }
+ unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
+ byte = (event >> PM_BYTE_SH) & PM_BYTE_MSK;
+ if (unit) {
+ lower = (event >> PM_LOWER_SH) & PM_LOWER_MSK;
+
+ /*
+ * Bus events on bytes 0 and 2 can be counted
+ * on PMC1/2/5/6; bytes 1 and 3 on PMC3/4/7/8.
+ */
+ if (!pmc)
+ grp = byte & 1;
+
+ if (!p4_unitinfo[unit].unit)
+ return -1;
+ mask |= p4_unitinfo[unit].mask;
+ value |= p4_unitinfo[unit].value;
+ sh = p4_unitinfo[unit].lowerbit;
+ if (sh > 1)
+ value |= (u64)lower << sh;
+ else if (lower != sh)
+ return -1;
+ unit = p4_unitinfo[unit].unit;
+
+ /* Set byte lane select field */
+ mask |= 0xfULL << (28 - 4 * byte);
+ value |= (u64)unit << (28 - 4 * byte);
+ }
+ if (grp == 0) {
+ /* increment PMC1/2/5/6 field */
+ mask |= 0x8000000000ull;
+ value |= 0x1000000000ull;
+ } else {
+ /* increment PMC3/4/7/8 field */
+ mask |= 0x800000000ull;
+ value |= 0x100000000ull;
+ }
+
+ /* Marked instruction events need sample_enable set */
+ if (p4_marked_instr_event(event)) {
+ mask |= 1ull << 56;
+ value |= 1ull << 56;
+ }
+
+ /* PMCSEL=6 decode events on byte 2 need sample_enable clear */
+ if (pmc && (event & PM_PMCSEL_MSK) == 6 && byte == 2)
+ mask |= 1ull << 56;
+
+ *maskp = mask;
+ *valp = value;
+ return 0;
+}
+
+static unsigned int ppc_inst_cmpl[] = {
+ 0x1001, 0x4001, 0x6001, 0x7001, 0x8001
+};
+
+static int p4_get_alternatives(unsigned int event, unsigned int alt[])
+{
+ int i, j, na;
+
+ alt[0] = event;
+ na = 1;
+
+ /* 2 possibilities for PM_GRP_DISP_REJECT */
+ if (event == 0x8003 || event == 0x0224) {
+ alt[1] = event ^ (0x8003 ^ 0x0224);
+ return 2;
+ }
+
+ /* 2 possibilities for PM_ST_MISS_L1 */
+ if (event == 0x0c13 || event == 0x0c23) {
+ alt[1] = event ^ (0x0c13 ^ 0x0c23);
+ return 2;
+ }
+
+ /* several possibilities for PM_INST_CMPL */
+ for (i = 0; i < ARRAY_SIZE(ppc_inst_cmpl); ++i) {
+ if (event == ppc_inst_cmpl[i]) {
+ for (j = 0; j < ARRAY_SIZE(ppc_inst_cmpl); ++j)
+ if (j != i)
+ alt[na++] = ppc_inst_cmpl[j];
+ break;
+ }
+ }
+
+ return na;
+}
+
+static int p4_compute_mmcr(unsigned int event[], int n_ev,
+ unsigned int hwc[], u64 mmcr[])
+{
+ u64 mmcr0 = 0, mmcr1 = 0, mmcra = 0;
+ unsigned int pmc, unit, byte, psel, lower;
+ unsigned int ttm, grp;
+ unsigned int pmc_inuse = 0;
+ unsigned int pmc_grp_use[2];
+ unsigned char busbyte[4];
+ unsigned char unituse[16];
+ unsigned int unitlower = 0;
+ int i;
+
+ if (n_ev > 8)
+ return -1;
+
+ /* First pass to count resource use */
+ pmc_grp_use[0] = pmc_grp_use[1] = 0;
+ memset(busbyte, 0, sizeof(busbyte));
+ memset(unituse, 0, sizeof(unituse));
+ for (i = 0; i < n_ev; ++i) {
+ pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+ if (pmc) {
+ if (pmc_inuse & (1 << (pmc - 1)))
+ return -1;
+ pmc_inuse |= 1 << (pmc - 1);
+ /* count 1/2/5/6 vs 3/4/7/8 use */
+ ++pmc_grp_use[((pmc - 1) >> 1) & 1];
+ }
+ unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+ byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+ lower = (event[i] >> PM_LOWER_SH) & PM_LOWER_MSK;
+ if (unit) {
+ if (!pmc)
+ ++pmc_grp_use[byte & 1];
+ if (unit == 6 || unit == 8)
+ /* map alt ISU1/IFU codes: 6->2, 8->3 */
+ unit = (unit >> 1) - 1;
+ if (busbyte[byte] && busbyte[byte] != unit)
+ return -1;
+ busbyte[byte] = unit;
+ lower <<= unit;
+ if (unituse[unit] && lower != (unitlower & lower))
+ return -1;
+ unituse[unit] = 1;
+ unitlower |= lower;
+ }
+ }
+ if (pmc_grp_use[0] > 4 || pmc_grp_use[1] > 4)
+ return -1;
+
+ /*
+ * Assign resources and set multiplexer selects.
+ *
+ * Units 1,2,3 are on TTM0, 4,6,7 on TTM1, 8,10 on TTM2.
+ * Each TTMx can only select one unit, but since
+ * units 2 and 6 are both ISU1, and 3 and 8 are both IFU,
+ * we have some choices.
+ */
+ if (unituse[2] & (unituse[1] | (unituse[3] & unituse[9]))) {
+ unituse[6] = 1; /* Move 2 to 6 */
+ unituse[2] = 0;
+ }
+ if (unituse[3] & (unituse[1] | unituse[2])) {
+ unituse[8] = 1; /* Move 3 to 8 */
+ unituse[3] = 0;
+ unitlower = (unitlower & ~8) | ((unitlower & 8) << 5);
+ }
+ /* Check only one unit per TTMx */
+ if (unituse[1] + unituse[2] + unituse[3] > 1 ||
+ unituse[4] + unituse[6] + unituse[7] > 1 ||
+ unituse[8] + unituse[9] > 1 ||
+ (unituse[5] | unituse[10] | unituse[11] |
+ unituse[13] | unituse[14]))
+ return -1;
+
+ /* Set TTMxSEL fields. Note, units 1-3 => TTM0SEL codes 0-2 */
+ mmcr1 |= (u64)(unituse[3] * 2 + unituse[2]) << MMCR1_TTM0SEL_SH;
+ mmcr1 |= (u64)(unituse[7] * 3 + unituse[6] * 2) << MMCR1_TTM1SEL_SH;
+ mmcr1 |= (u64)unituse[9] << MMCR1_TTM2SEL_SH;
+
+ /* Set TTCxSEL fields. */
+ if (unitlower & 0xe)
+ mmcr1 |= 1ull << MMCR1_TTC0SEL_SH;
+ if (unitlower & 0xf0)
+ mmcr1 |= 1ull << MMCR1_TTC1SEL_SH;
+ if (unitlower & 0xf00)
+ mmcr1 |= 1ull << MMCR1_TTC2SEL_SH;
+ if (unitlower & 0x7000)
+ mmcr1 |= 1ull << MMCR1_TTC3SEL_SH;
+
+ /* Set byte lane select fields. */
+ for (byte = 0; byte < 4; ++byte) {
+ unit = busbyte[byte];
+ if (!unit)
+ continue;
+ if (unit == 0xf) {
+ /* special case for GPS */
+ mmcr1 |= 1ull << (MMCR1_DEBUG0SEL_SH - byte);
+ } else {
+ if (!unituse[unit])
+ ttm = unit - 1; /* 2->1, 3->2 */
+ else
+ ttm = unit >> 2;
+ mmcr1 |= (u64)ttm << (MMCR1_TD_CP_DBG0SEL_SH - 2*byte);
+ }
+ }
+
+ /* Second pass: assign PMCs, set PMCxSEL and PMCx_ADDER_SEL fields */
+ for (i = 0; i < n_ev; ++i) {
+ pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
+ unit = (event[i] >> PM_UNIT_SH) & PM_UNIT_MSK;
+ byte = (event[i] >> PM_BYTE_SH) & PM_BYTE_MSK;
+ psel = event[i] & PM_PMCSEL_MSK;
+ if (!pmc) {
+ /* Bus event or 00xxx direct event (off or cycles) */
+ if (unit)
+ psel |= 0x10 | ((byte & 2) << 2);
+ for (pmc = 0; pmc < 8; ++pmc) {
+ if (pmc_inuse & (1 << pmc))
+ continue;
+ grp = (pmc >> 1) & 1;
+ if (unit) {
+ if (grp == (byte & 1))
+ break;
+ } else if (pmc_grp_use[grp] < 4) {
+ ++pmc_grp_use[grp];
+ break;
+ }
+ }
+ pmc_inuse |= 1 << pmc;
+ } else {
+ /* Direct event */
+ --pmc;
+ if (psel == 0 && (byte & 2))
+ /* add events on higher-numbered bus */
+ mmcr1 |= 1ull << mmcr1_adder_bits[pmc];
+ else if (psel == 6 && byte == 3)
+ /* seem to need to set sample_enable here */
+ mmcra |= MMCRA_SAMPLE_ENABLE;
+ psel |= 8;
+ }
+ if (pmc <= 1)
+ mmcr0 |= psel << (MMCR0_PMC1SEL_SH - 7 * pmc);
+ else
+ mmcr1 |= psel << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2));
+ if (pmc == 7) /* PMC8 */
+ mmcra |= (psel & 1) << MMCRA_PMC8SEL0_SH;
+ hwc[i] = pmc;
+ if (p4_marked_instr_event(event[i]))
+ mmcra |= MMCRA_SAMPLE_ENABLE;
+ }
+
+ if (pmc_inuse & 1)
+ mmcr0 |= MMCR0_PMC1CE;
+ if (pmc_inuse & 0xfe)
+ mmcr0 |= MMCR0_PMCjCE;
+
+ mmcra |= 0x2000; /* mark only one IOP per PPC instruction */
+
+ /* Return MMCRx values */
+ mmcr[0] = mmcr0;
+ mmcr[1] = mmcr1;
+ mmcr[2] = mmcra;
+ return 0;
+}
+
+static void p4_disable_pmc(unsigned int pmc, u64 mmcr[])
+{
+ /*
+ * Setting the PMCxSEL field to 0 disables PMC x.
+ * (Note that pmc is 0-based here, not 1-based.)
+ */
+ if (pmc <= 1) {
+ mmcr[0] &= ~(0x1fUL << (MMCR0_PMC1SEL_SH - 7 * pmc));
+ } else {
+ mmcr[1] &= ~(0x1fUL << (MMCR1_PMC3SEL_SH - 5 * (pmc - 2)));
+ if (pmc == 7)
+ mmcr[2] &= ~(1UL << MMCRA_PMC8SEL0_SH);
+ }
+}
+
+static int p4_generic_events[] = {
+ [PERF_COUNT_CPU_CYCLES] = 7,
+ [PERF_COUNT_INSTRUCTIONS] = 0x1001,
+ [PERF_COUNT_CACHE_REFERENCES] = 0x8c10, /* PM_LD_REF_L1 */
+ [PERF_COUNT_CACHE_MISSES] = 0x3c10, /* PM_LD_MISS_L1 */
+ [PERF_COUNT_BRANCH_INSTRUCTIONS] = 0x330, /* PM_BR_ISSUED */
+ [PERF_COUNT_BRANCH_MISSES] = 0x331, /* PM_BR_MPRED_CR */
+};
+
+struct power_pmu power4_pmu = {
+ .n_counter = 8,
+ .max_alternatives = 5,
+ .add_fields = 0x0000001100005555ull,
+ .test_adder = 0x0011083300000000ull,
+ .compute_mmcr = p4_compute_mmcr,
+ .get_constraint = p4_get_constraint,
+ .get_alternatives = p4_get_alternatives,
+ .disable_pmc = p4_disable_pmc,
+ .n_generic = ARRAY_SIZE(p4_generic_events),
+ .generic_events = p4_generic_events,
+};
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists