| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <386072610903150402o34f01781qac192d317cc76a92@mail.gmail.com>
Date: Sun, 15 Mar 2009 19:02:04 +0800
From: Bryan Wu <cooloney@...nel.org>
To: linux-kernel@...r.kernel.org
Cc: mm-commits@...r.kernel.org, graff.yang@...il.com,
samuel@...tiz.org, vapier@...too.org
Subject: Re: + irda-new-blackfin-on-chip-sir-irda-driver.patch added to -mm
tree
On Sat, Mar 14, 2009 at 3:38 AM, <akpm@...ux-foundation.org> wrote:
>
> The patch titled
> irda: new Blackfin on-chip SIR IrDA driver
> has been added to the -mm tree. Its filename is
> irda-new-blackfin-on-chip-sir-irda-driver.patch
>
> Before you just go and hit "reply", please:
> a) Consider who else should be cc'ed
> b) Prefer to cc a suitable mailing list as well
> c) Ideally: find the original patch on the mailing list and do a
> reply-to-all to that, adding suitable additional cc's
>
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
> See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find
> out what to do about this
>
> The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/
>
> ------------------------------------------------------
> Subject: irda: new Blackfin on-chip SIR IrDA driver
> From: Graff Yang <graff.yang@...il.com>
>
> Signed-off-by: Graff Yang <graff.yang@...il.com>
> Cc: Mike Frysinger <vapier@...too.org>
> Cc: Bryan Wu <bryan.wu@...log.com>
Sorry for this, This email is not available now. Please use "Bryan Wu
<cooloney@...nel.org>"
Thanks
-Bryan
> Cc: Samuel Ortiz <samuel@...tiz.org>
> Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
> ---
>
> drivers/net/irda/Kconfig | 45 +
> drivers/net/irda/Makefile | 1
> drivers/net/irda/bfin_sir.c | 820 ++++++++++++++++++++++++++++++++++
> drivers/net/irda/bfin_sir.h | 148 ++++++
> 4 files changed, 1014 insertions(+)
>
> diff -puN drivers/net/irda/Kconfig~irda-new-blackfin-on-chip-sir-irda-driver drivers/net/irda/Kconfig
> --- a/drivers/net/irda/Kconfig~irda-new-blackfin-on-chip-sir-irda-driver
> +++ a/drivers/net/irda/Kconfig
> @@ -17,6 +17,51 @@ config IRTTY_SIR
>
> If unsure, say Y.
>
> +config BFIN_SIR
> + tristate "Blackfin SIR on UART"
> + depends on BLACKFIN && IRDA
> + default n
> + help
> + Say Y here if your want to enable SIR function on Blackfin UART
> + devices.
> +
> + To activate this driver you can start irattach like:
> + "irattach irda0 -s"
> +
> + Saying M, it will be built as a module named bfin_sir.
> +
> + Note that you need to turn off one of the serial drivers for SIR
> + to use that UART.
> +
> +config BFIN_SIR0
> + bool "Blackfin SIR on UART0"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART0
> +
> +config BFIN_SIR1
> + bool "Blackfin SIR on UART1"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
> +
> +config BFIN_SIR2
> + bool "Blackfin SIR on UART2"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
> +
> +config BFIN_SIR3
> + bool "Blackfin SIR on UART3"
> + depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
> +
> +choice
> + prompt "SIR Mode"
> + depends on BFIN_SIR
> + default SIR_BFIN_DMA
> +
> +config SIR_BFIN_DMA
> + bool "DMA mode"
> + depends on !DMA_UNCACHED_NONE
> +
> +config SIR_BFIN_PIO
> + bool "PIO mode"
> +endchoice
> +
> comment "Dongle support"
>
> config DONGLE
> diff -puN drivers/net/irda/Makefile~irda-new-blackfin-on-chip-sir-irda-driver drivers/net/irda/Makefile
> --- a/drivers/net/irda/Makefile~irda-new-blackfin-on-chip-sir-irda-driver
> +++ a/drivers/net/irda/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_MCS_FIR) += mcs7780
> obj-$(CONFIG_AU1000_FIR) += au1k_ir.o
> # SIR drivers
> obj-$(CONFIG_IRTTY_SIR) += irtty-sir.o sir-dev.o
> +obj-$(CONFIG_BFIN_SIR) += bfin_sir.o
> # dongle drivers for SIR drivers
> obj-$(CONFIG_ESI_DONGLE) += esi-sir.o
> obj-$(CONFIG_TEKRAM_DONGLE) += tekram-sir.o
> diff -puN /dev/null drivers/net/irda/bfin_sir.c
> --- /dev/null
> +++ a/drivers/net/irda/bfin_sir.c
> @@ -0,0 +1,820 @@
> +/*
> + * Blackfin Infra-red Driver
> + *
> + * Copyright 2006-2009 Analog Devices Inc.
> + *
> + * Enter bugs at http://blackfin.uclinux.org/
> + *
> + * Licensed under the GPL-2 or later.
> + *
> + */
> +#include "bfin_sir.h"
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +#define DMA_SIR_RX_XCNT 10
> +#define DMA_SIR_RX_YCNT (PAGE_SIZE / DMA_SIR_RX_XCNT)
> +#define DMA_SIR_RX_FLUSH_JIFS (HZ * 4 / 250)
> +#endif
> +
> +#if ANOMALY_05000447
> +static int max_rate = 57600;
> +#else
> +static int max_rate = 115200;
> +#endif
> +
> +static void turnaround_delay(unsigned long last_jif, int mtt)
> +{
> + long ticks;
> +
> + mtt = mtt < 10000 ? 10000 : mtt;
> + ticks = 1 + mtt / (USEC_PER_SEC / HZ);
> + schedule_timeout_uninterruptible(ticks);
> +}
> +
> +static void __devinit bfin_sir_init_ports(struct bfin_sir_port *sp, struct platform_device *pdev)
> +{
> + int i;
> + struct resource *res;
> +
> + for (i = 0; i < pdev->num_resources; i++) {
> + res = &pdev->resource[i];
> + switch (res->flags) {
> + case IORESOURCE_MEM:
> + sp->membase = (void __iomem *)res->start;
> + break;
> + case IORESOURCE_IRQ:
> + sp->irq = res->start;
> + break;
> + case IORESOURCE_DMA:
> + sp->rx_dma_channel = res->start;
> + sp->tx_dma_channel = res->end;
> + break;
> + default:
> + break;
> + }
> + }
> +
> + sp->clk = get_sclk();
> +#ifdef CONFIG_SIR_BFIN_DMA
> + sp->tx_done = 1;
> + init_timer(&(sp->rx_dma_timer));
> +#endif
> +}
> +
> +static void bfin_sir_stop_tx(struct bfin_sir_port *port)
> +{
> +#ifdef CONFIG_SIR_BFIN_DMA
> + disable_dma(port->tx_dma_channel);
> +#endif
> +
> + while (!(SIR_UART_GET_LSR(port) & THRE)) {
> + cpu_relax();
> + continue;
> + }
> +
> + SIR_UART_STOP_TX(port);
> +}
> +
> +static void bfin_sir_enable_tx(struct bfin_sir_port *port)
> +{
> + SIR_UART_ENABLE_TX(port);
> +}
> +
> +static void bfin_sir_stop_rx(struct bfin_sir_port *port)
> +{
> + SIR_UART_STOP_RX(port);
> +}
> +
> +static void bfin_sir_enable_rx(struct bfin_sir_port *port)
> +{
> + SIR_UART_ENABLE_RX(port);
> +}
> +
> +static int bfin_sir_set_speed(struct bfin_sir_port *port, int speed)
> +{
> + int ret = -EINVAL;
> + unsigned int quot;
> + unsigned short val, lsr, lcr;
> + static int utime;
> + int count = 10;
> +
> + lcr = WLS(8);
> +
> + switch (speed) {
> + case 9600:
> + case 19200:
> + case 38400:
> + case 57600:
> + case 115200:
> +
> + quot = (port->clk + (8 * speed)) / (16 * speed)\
> + - ANOMALY_05000230;
> +
> + do {
> + udelay(utime);
> + lsr = SIR_UART_GET_LSR(port);
> + } while (!(lsr & TEMT) && count--);
> +
> + /* The useconds for 1 bits to transmit */
> + utime = 1000000 / speed + 1;
> +
> + /* Clear UCEN bit to reset the UART state machine
> + * and control registers
> + */
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~UCEN;
> + SIR_UART_PUT_GCTL(port, val);
> +
> + /* Set DLAB in LCR to Access THR RBR IER */
> + SIR_UART_SET_DLAB(port);
> + SSYNC();
> +
> + SIR_UART_PUT_DLL(port, quot & 0xFF);
> + SIR_UART_PUT_DLH(port, (quot >> 8) & 0xFF);
> + SSYNC();
> +
> + /* Clear DLAB in LCR */
> + SIR_UART_CLEAR_DLAB(port);
> + SSYNC();
> +
> + SIR_UART_PUT_LCR(port, lcr);
> +
> + val = SIR_UART_GET_GCTL(port);
> + val |= UCEN;
> + SIR_UART_PUT_GCTL(port, val);
> +
> + ret = 0;
> + break;
> + default:
> + printk(KERN_WARNING "bfin_sir: Invalid speed %d\n", speed);
> + break;
> + }
> +
> + val = SIR_UART_GET_GCTL(port);
> + /* If not add the 'RPOLC', we can't catch the receive interrupt.
> + * It's related with the HW layout and the IR transiver.
> + */
> + val |= IREN | RPOLC;
> + SIR_UART_PUT_GCTL(port, val);
> + return ret;
> +}
> +
> +static int bfin_sir_is_receiving(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (!(SIR_UART_GET_IER(port) & ERBFI))
> + return 0;
> + return self->rx_buff.state != OUTSIDE_FRAME;
> +}
> +
> +#ifdef CONFIG_SIR_BFIN_PIO
> +static void bfin_sir_tx_chars(struct net_device *dev)
> +{
> + unsigned int chr;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (self->tx_buff.len != 0) {
> + chr = *(self->tx_buff.data);
> + SIR_UART_PUT_CHAR(port, chr);
> + self->tx_buff.data++;
> + self->tx_buff.len--;
> + } else {
> + self->stats.tx_packets++;
> + self->stats.tx_bytes += self->tx_buff.data - self->tx_buff.head;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_stop_tx(port);
> + bfin_sir_enable_rx(port);
> + /* I'm hungry! */
> + netif_wake_queue(dev);
> + }
> +}
> +
> +static void bfin_sir_rx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned char ch;
> +
> + SIR_UART_CLEAR_LSR(port);
> + ch = SIR_UART_GET_CHAR(port);
> + async_unwrap_char(dev, &self->stats, &self->rx_buff, ch);
> + dev->last_rx = jiffies;
> +}
> +
> +static irqreturn_t bfin_sir_rx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + while ((SIR_UART_GET_LSR(port) & DR))
> + bfin_sir_rx_chars(dev);
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t bfin_sir_tx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + if (SIR_UART_GET_LSR(port) & THRE)
> + bfin_sir_tx_chars(dev);
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +#endif /* CONFIG_SIR_BFIN_PIO */
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +static void bfin_sir_dma_tx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + if (!port->tx_done)
> + return;
> + port->tx_done = 0;
> +
> + if (self->tx_buff.len == 0) {
> + self->stats.tx_packets++;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_enable_rx(port);
> + port->tx_done = 1;
> + netif_wake_queue(dev);
> + return;
> + }
> +
> + blackfin_dcache_flush_range((unsigned long)(self->tx_buff.data),
> + (unsigned long)(self->tx_buff.data+self->tx_buff.len));
> + set_dma_config(port->tx_dma_channel,
> + set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP,
> + INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8,
> + DMA_SYNC_RESTART));
> + set_dma_start_addr(port->tx_dma_channel,
> + (unsigned long)(self->tx_buff.data));
> + set_dma_x_count(port->tx_dma_channel, self->tx_buff.len);
> + set_dma_x_modify(port->tx_dma_channel, 1);
> + enable_dma(port->tx_dma_channel);
> +}
> +
> +static irqreturn_t bfin_sir_dma_tx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> +
> + spin_lock(&self->lock);
> + if (!(get_dma_curr_irqstat(port->tx_dma_channel) & DMA_RUN)) {
> + clear_dma_irqstat(port->tx_dma_channel);
> + bfin_sir_stop_tx(port);
> +
> + self->stats.tx_packets++;
> + self->stats.tx_bytes += self->tx_buff.len;
> + self->tx_buff.len = 0;
> + if (self->newspeed) {
> + bfin_sir_set_speed(port, self->newspeed);
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_enable_rx(port);
> + /* I'm hungry! */
> + netif_wake_queue(dev);
> + port->tx_done = 1;
> + }
> + spin_unlock(&self->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void bfin_sir_dma_rx_chars(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int i;
> +
> + SIR_UART_CLEAR_LSR(port);
> +
> + for (i = port->rx_dma_buf.head; i < port->rx_dma_buf.tail; i++)
> + async_unwrap_char(dev, &self->stats, &self->rx_buff, port->rx_dma_buf.buf[i]);
> +}
> +
> +void bfin_sir_rx_dma_timeout(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int x_pos, pos;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&self->lock, flags);
> + x_pos = DMA_SIR_RX_XCNT - get_dma_curr_xcount(port->rx_dma_channel);
> + if (x_pos == DMA_SIR_RX_XCNT)
> + x_pos = 0;
> +
> + pos = port->rx_dma_nrows * DMA_SIR_RX_XCNT + x_pos;
> +
> + if (pos > port->rx_dma_buf.tail) {
> + port->rx_dma_buf.tail = pos;
> + bfin_sir_dma_rx_chars(dev);
> + port->rx_dma_buf.head = port->rx_dma_buf.tail;
> + }
> + spin_unlock_irqrestore(&self->lock, flags);
> +}
> +
> +static irqreturn_t bfin_sir_dma_rx_int(int irq, void *dev_id)
> +{
> + struct net_device *dev = dev_id;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned short irqstat;
> +
> + spin_lock(&self->lock);
> +
> + port->rx_dma_nrows++;
> + port->rx_dma_buf.tail = DMA_SIR_RX_XCNT * port->rx_dma_nrows;
> + bfin_sir_dma_rx_chars(dev);
> + if (port->rx_dma_nrows >= DMA_SIR_RX_YCNT) {
> + port->rx_dma_nrows = 0;
> + port->rx_dma_buf.tail = 0;
> + }
> + port->rx_dma_buf.head = port->rx_dma_buf.tail;
> +
> + irqstat = get_dma_curr_irqstat(port->rx_dma_channel);
> + clear_dma_irqstat(port->rx_dma_channel);
> + spin_unlock(&self->lock);
> +
> + mod_timer(&port->rx_dma_timer, jiffies + DMA_SIR_RX_FLUSH_JIFS);
> + return IRQ_HANDLED;
> +}
> +#endif /* CONFIG_SIR_BFIN_DMA */
> +
> +static int bfin_sir_startup(struct bfin_sir_port *port, struct net_device *dev)
> +{
> +#ifdef CONFIG_SIR_BFIN_DMA
> + dma_addr_t dma_handle;
> +#endif /* CONFIG_SIR_BFIN_DMA */
> +
> + if (request_dma(port->rx_dma_channel, "BFIN_UART_RX") < 0) {
> + dev_warn(&dev->dev, "Unable to attach SIR RX DMA channel\n");
> + return -EBUSY;
> + }
> +
> + if (request_dma(port->tx_dma_channel, "BFIN_UART_TX") < 0) {
> + dev_warn(&dev->dev, "Unable to attach SIR TX DMA channel\n");
> + free_dma(port->rx_dma_channel);
> + return -EBUSY;
> + }
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +
> + set_dma_callback(port->rx_dma_channel, bfin_sir_dma_rx_int, dev);
> + set_dma_callback(port->tx_dma_channel, bfin_sir_dma_tx_int, dev);
> +
> + port->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA);
> + port->rx_dma_buf.head = 0;
> + port->rx_dma_buf.tail = 0;
> + port->rx_dma_nrows = 0;
> +
> + set_dma_config(port->rx_dma_channel,
> + set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO,
> + INTR_ON_ROW, DIMENSION_2D,
> + DATA_SIZE_8, DMA_SYNC_RESTART));
> + set_dma_x_count(port->rx_dma_channel, DMA_SIR_RX_XCNT);
> + set_dma_x_modify(port->rx_dma_channel, 1);
> + set_dma_y_count(port->rx_dma_channel, DMA_SIR_RX_YCNT);
> + set_dma_y_modify(port->rx_dma_channel, 1);
> + set_dma_start_addr(port->rx_dma_channel, (unsigned long)port->rx_dma_buf.buf);
> + enable_dma(port->rx_dma_channel);
> +
> + port->rx_dma_timer.data = (unsigned long)(dev);
> + port->rx_dma_timer.function = (void *)bfin_sir_rx_dma_timeout;
> +
> +#else
> +
> + if (request_irq(port->irq, bfin_sir_rx_int, IRQF_DISABLED, "BFIN_SIR_RX", dev)) {
> + dev_warn(&dev->dev, "Unable to attach SIR RX interrupt\n");
> + return -EBUSY;
> + }
> +
> + if (request_irq(port->irq+1, bfin_sir_tx_int, IRQF_DISABLED, "BFIN_SIR_TX", dev)) {
> + dev_warn(&dev->dev, "Unable to attach SIR TX interrupt\n");
> + free_irq(port->irq, dev);
> + return -EBUSY;
> + }
> +#endif
> +
> + return 0;
> +}
> +
> +static void bfin_sir_shutdown(struct bfin_sir_port *port, struct net_device *dev)
> +{
> + unsigned short val;
> +
> + bfin_sir_stop_rx(port);
> + SIR_UART_DISABLE_INTS(port);
> +
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~(UCEN | IREN | RPOLC);
> + SIR_UART_PUT_GCTL(port, val);
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> + disable_dma(port->tx_dma_channel);
> + disable_dma(port->rx_dma_channel);
> + del_timer(&(port->rx_dma_timer));
> + dma_free_coherent(NULL, PAGE_SIZE, port->rx_dma_buf.buf, 0);
> +#else
> + free_irq(port->irq+1, dev);
> + free_irq(port->irq, dev);
> +#endif
> + free_dma(port->tx_dma_channel);
> + free_dma(port->rx_dma_channel);
> +}
> +
> +#ifdef CONFIG_PM
> +static int bfin_sir_suspend(struct platform_device *pdev, pm_message_t state)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> +
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + if (self->open) {
> + flush_work(&self->work);
> + bfin_sir_shutdown(self->sir_port, dev);
> + netif_device_detach(dev);
> + }
> +
> + return 0;
> +}
> +static int bfin_sir_resume(struct platform_device *pdev)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> + struct bfin_sir_port *port;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> +
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + port = self->sir_port;
> + if (self->open) {
> + if (self->newspeed) {
> + self->speed = self->newspeed;
> + self->newspeed = 0;
> + }
> + bfin_sir_startup(port, dev);
> + bfin_sir_set_speed(port, 9600);
> + bfin_sir_enable_rx(port);
> + netif_device_attach(dev);
> + }
> + return 0;
> +}
> +#else
> +#define bfin_sir_suspend NULL
> +#define bfin_sir_resume NULL
> +#endif
> +
> +static void bfin_sir_send_work(struct work_struct *work)
> +{
> + struct bfin_sir_self *self = container_of(work, struct bfin_sir_self, work);
> + struct net_device *dev = self->sir_port->dev;
> + struct bfin_sir_port *port = self->sir_port;
> + unsigned short val;
> + int tx_cnt = 10;
> +
> + while (bfin_sir_is_receiving(dev) && --tx_cnt)
> + turnaround_delay(dev->last_rx, self->mtt);
> +
> + bfin_sir_stop_rx(port);
> +
> + /* To avoid losting RX interrupt, we reset IR function before
> + * sending data. We also can set the speed, which will
> + * reset all the UART.
> + */
> + val = SIR_UART_GET_GCTL(port);
> + val &= ~(IREN | RPOLC);
> + SIR_UART_PUT_GCTL(port, val);
> + SSYNC();
> + val |= IREN | RPOLC;
> + SIR_UART_PUT_GCTL(port, val);
> + SSYNC();
> + /* bfin_sir_set_speed(port, self->speed); */
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> + bfin_sir_dma_tx_chars(dev);
> +#endif
> + bfin_sir_enable_tx(port);
> + dev->trans_start = jiffies;
> +}
> +
> +static int bfin_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + int speed = irda_get_next_speed(skb);
> +
> + netif_stop_queue(dev);
> +
> + self->mtt = irda_get_mtt(skb);
> +
> + if (speed != self->speed && speed != -1)
> + self->newspeed = speed;
> +
> + self->tx_buff.data = self->tx_buff.head;
> + if (skb->len == 0)
> + self->tx_buff.len = 0;
> + else
> + self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize);
> +
> + schedule_work(&self->work);
> + dev_kfree_skb(skb);
> +
> + return 0;
> +}
> +
> +static int bfin_sir_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd)
> +{
> + struct if_irda_req *rq = (struct if_irda_req *)ifreq;
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int ret = 0;
> +
> + switch (cmd) {
> + case SIOCSBANDWIDTH:
> + if (capable(CAP_NET_ADMIN)) {
> + if (self->open) {
> + ret = bfin_sir_set_speed(port, rq->ifr_baudrate);
> + bfin_sir_enable_rx(port);
> + } else {
> + dev_warn(&dev->dev, "SIOCSBANDWIDTH: !netif_running\n");
> + ret = 0;
> + }
> + }
> + break;
> +
> + case SIOCSMEDIABUSY:
> + ret = -EPERM;
> + if (capable(CAP_NET_ADMIN)) {
> + irda_device_set_media_busy(dev, TRUE);
> + ret = 0;
> + }
> + break;
> +
> + case SIOCGRECEIVING:
> + rq->ifr_receiving = bfin_sir_is_receiving(dev);
> + break;
> +
> + default:
> + ret = -EOPNOTSUPP;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static struct net_device_stats *bfin_sir_stats(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> +
> + return &self->stats;
> +}
> +
> +static int bfin_sir_open(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> + struct bfin_sir_port *port = self->sir_port;
> + int err = -ENOMEM;
> +
> + self->newspeed = 0;
> + self->speed = 9600;
> +
> + spin_lock_init(&self->lock);
> +
> + err = bfin_sir_startup(port, dev);
> + if (err)
> + goto err_startup;
> +
> + bfin_sir_set_speed(port, 9600);
> +
> + self->irlap = irlap_open(dev, &self->qos, DRIVER_NAME);
> + if (!self->irlap)
> + goto err_irlap;
> +
> + INIT_WORK(&self->work, bfin_sir_send_work);
> +
> + /*
> + * Now enable the interrupt then start the queue
> + */
> + self->open = 1;
> + bfin_sir_enable_rx(port);
> +
> + netif_start_queue(dev);
> +
> + return 0;
> +
> +err_irlap:
> + self->open = 0;
> + bfin_sir_shutdown(port, dev);
> +err_startup:
> + return err;
> +}
> +
> +static int bfin_sir_stop(struct net_device *dev)
> +{
> + struct bfin_sir_self *self = netdev_priv(dev);
> +
> + flush_work(&self->work);
> + bfin_sir_shutdown(self->sir_port, dev);
> +
> + if (self->rxskb) {
> + dev_kfree_skb(self->rxskb);
> + self->rxskb = NULL;
> + }
> +
> + /* Stop IrLAP */
> + if (self->irlap) {
> + irlap_close(self->irlap);
> + self->irlap = NULL;
> + }
> +
> + netif_stop_queue(dev);
> + self->open = 0;
> +
> + return 0;
> +}
> +
> +static int bfin_sir_init_iobuf(iobuff_t *io, int size)
> +{
> + io->head = kmalloc(size, GFP_KERNEL);
> + if (!io->head)
> + return -ENOMEM;
> + io->truesize = size;
> + io->in_frame = FALSE;
> + io->state = OUTSIDE_FRAME;
> + io->data = io->head;
> + return 0;
> +}
> +
> +static int __devinit bfin_sir_probe(struct platform_device *pdev)
> +{
> + struct net_device *dev;
> + struct bfin_sir_self *self;
> + unsigned int baudrate_mask;
> + struct bfin_sir_port *sir_port;
> + int err;
> +
> + if (pdev->id >= 0 && pdev->id < ARRAY_SIZE(per) && \
> + per[pdev->id][3] == pdev->id) {
> + err = peripheral_request_list(per[pdev->id], DRIVER_NAME);
> + if (err)
> + return err;
> + } else {
> + dev_err(&pdev->dev, "Invalid pdev id, please check board file\n");
> + return -ENODEV;
> + }
> +
> + err = -ENOMEM;
> + sir_port = kmalloc(sizeof(*sir_port), GFP_KERNEL);
> + if (!sir_port)
> + goto err_mem_0;
> +
> + bfin_sir_init_ports(sir_port, pdev);
> +
> + dev = alloc_irdadev(sizeof(*self));
> + if (!dev)
> + goto err_mem_1;
> +
> + self = netdev_priv(dev);
> + self->dev = &pdev->dev;
> + self->sir_port = sir_port;
> + sir_port->dev = dev;
> +
> + err = bfin_sir_init_iobuf(&self->rx_buff, IRDA_SKB_MAX_MTU);
> + if (err)
> + goto err_mem_2;
> + err = bfin_sir_init_iobuf(&self->tx_buff, IRDA_SIR_MAX_FRAME);
> + if (err)
> + goto err_mem_3;
> +
> + dev->hard_start_xmit = bfin_sir_hard_xmit;
> + dev->open = bfin_sir_open;
> + dev->stop = bfin_sir_stop;
> + dev->do_ioctl = bfin_sir_ioctl;
> + dev->get_stats = bfin_sir_stats;
> + dev->irq = sir_port->irq;
> +
> + irda_init_max_qos_capabilies(&self->qos);
> +
> + baudrate_mask = IR_9600;
> +
> + switch (max_rate) {
> + case 115200:
> + baudrate_mask |= IR_115200;
> + case 57600:
> + baudrate_mask |= IR_57600;
> + case 38400:
> + baudrate_mask |= IR_38400;
> + case 19200:
> + baudrate_mask |= IR_19200;
> + case 9600:
> + break;
> + default:
> + dev_warn(&pdev->dev, "Invalid maximum baud rate, using 9600\n");
> + }
> +
> + self->qos.baud_rate.bits &= baudrate_mask;
> +
> + self->qos.min_turn_time.bits = 1; /* 10 ms or more */
> +
> + irda_qos_bits_to_value(&self->qos);
> +
> + err = register_netdev(dev);
> +
> + if (err) {
> + kfree(self->tx_buff.head);
> +err_mem_3:
> + kfree(self->rx_buff.head);
> +err_mem_2:
> + free_netdev(dev);
> +err_mem_1:
> + kfree(sir_port);
> +err_mem_0:
> + peripheral_free_list(per[pdev->id]);
> + } else
> + platform_set_drvdata(pdev, sir_port);
> +
> + return err;
> +}
> +
> +static int __devexit bfin_sir_remove(struct platform_device *pdev)
> +{
> + struct bfin_sir_port *sir_port;
> + struct net_device *dev = NULL;
> + struct bfin_sir_self *self;
> +
> + sir_port = platform_get_drvdata(pdev);
> + if (!sir_port)
> + return 0;
> + dev = sir_port->dev;
> + self = netdev_priv(dev);
> + unregister_netdev(dev);
> + kfree(self->tx_buff.head);
> + kfree(self->rx_buff.head);
> + free_netdev(dev);
> + kfree(sir_port);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver bfin_ir_driver = {
> + .probe = bfin_sir_probe,
> + .remove = __devexit_p(bfin_sir_remove),
> + .suspend = bfin_sir_suspend,
> + .resume = bfin_sir_resume,
> + .driver = {
> + .name = DRIVER_NAME,
> + },
> +};
> +
> +static int __init bfin_sir_init(void)
> +{
> + return platform_driver_register(&bfin_ir_driver);
> +}
> +
> +static void __exit bfin_sir_exit(void)
> +{
> + platform_driver_unregister(&bfin_ir_driver);
> +}
> +
> +module_init(bfin_sir_init);
> +module_exit(bfin_sir_exit);
> +
> +module_param(max_rate, int, 0);
> +MODULE_PARM_DESC(max_rate, "Maximum baud rate (115200, 57600, 38400, 19200, 9600)");
> +
> +MODULE_AUTHOR("Graf Yang <graf.yang@...log.com>");
> +MODULE_DESCRIPTION("Blackfin IrDA driver");
> +MODULE_LICENSE("GPL");
> diff -puN /dev/null drivers/net/irda/bfin_sir.h
> --- /dev/null
> +++ a/drivers/net/irda/bfin_sir.h
> @@ -0,0 +1,148 @@
> +/*
> + * Blackfin Infra-red Driver
> + *
> + * Copyright 2006-2009 Analog Devices Inc.
> + *
> + * Enter bugs at http://blackfin.uclinux.org/
> + *
> + * Licensed under the GPL-2 or later.
> + *
> + */
> +
> +#include <linux/serial.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/interrupt.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +
> +#include <net/irda/irda.h>
> +#include <net/irda/wrapper.h>
> +#include <net/irda/irda_device.h>
> +
> +#include <asm/irq.h>
> +#include <asm/cacheflush.h>
> +#include <asm/dma.h>
> +#include <asm/portmux.h>
> +
> +#ifdef CONFIG_SIR_BFIN_DMA
> +struct dma_rx_buf {
> + char *buf;
> + int head;
> + int tail;
> +};
> +#endif
> +
> +struct bfin_sir_port {
> + unsigned char __iomem *membase;
> + unsigned int irq;
> + unsigned int lsr;
> + unsigned long clk;
> + struct net_device *dev;
> +#ifdef CONFIG_SIR_BFIN_DMA
> + int tx_done;
> + struct dma_rx_buf rx_dma_buf;
> + struct timer_list rx_dma_timer;
> + int rx_dma_nrows;
> +#endif
> + unsigned int tx_dma_channel;
> + unsigned int rx_dma_channel;
> +};
> +
> +struct bfin_sir_port_res {
> + unsigned long base_addr;
> + int irq;
> + unsigned int rx_dma_channel;
> + unsigned int tx_dma_channel;
> +};
> +
> +struct bfin_sir_self {
> + struct bfin_sir_port *sir_port;
> + spinlock_t lock;
> + unsigned int open;
> + int speed;
> + int newspeed;
> +
> + struct sk_buff *txskb;
> + struct sk_buff *rxskb;
> + struct net_device_stats stats;
> + struct device *dev;
> + struct irlap_cb *irlap;
> + struct qos_info qos;
> +
> + iobuff_t tx_buff;
> + iobuff_t rx_buff;
> +
> + struct work_struct work;
> + int mtt;
> +};
> +
> +#define DRIVER_NAME "bfin_sir"
> +
> +#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
> +#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
> +#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
> +#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
> +#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
> +
> +#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
> +#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
> +#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
> +#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
> +#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
> +
> +#ifdef CONFIG_BF54x
> +#define SIR_UART_GET_LSR(port) bfin_read16((port)->membase + OFFSET_LSR)
> +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER_SET)
> +#define SIR_UART_SET_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_SET), v)
> +#define SIR_UART_CLEAR_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER_CLEAR), v)
> +#define SIR_UART_PUT_LSR(port, v) bfin_write16(((port)->membase + OFFSET_LSR), v)
> +#define SIR_UART_CLEAR_LSR(port) bfin_write16(((port)->membase + OFFSET_LSR), -1)
> +
> +#define SIR_UART_SET_DLAB(port)
> +#define SIR_UART_CLEAR_DLAB(port)
> +
> +#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_SET_IER(port, v)
> +#define SIR_UART_DISABLE_INTS(port) SIR_UART_CLEAR_IER(port, 0xF)
> +#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_LSR(port, TFI); SIR_UART_CLEAR_IER(port, ETBEI); } while (0)
> +#define SIR_UART_ENABLE_TX(port) do { SIR_UART_SET_IER(port, ETBEI); } while (0)
> +#define SIR_UART_STOP_RX(port) do { SIR_UART_CLEAR_IER(port, ERBFI); } while (0)
> +#define SIR_UART_ENABLE_RX(port) do { SIR_UART_SET_IER(port, ERBFI); } while (0)
> +#else
> +
> +#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
> +#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
> +#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
> +
> +#define SIR_UART_SET_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) | DLAB); } while (0)
> +#define SIR_UART_CLEAR_DLAB(port) do { SIR_UART_PUT_LCR(port, SIR_UART_GET_LCR(port) & ~DLAB); } while (0)
> +
> +#define SIR_UART_ENABLE_INTS(port, v) SIR_UART_PUT_IER(port, v)
> +#define SIR_UART_DISABLE_INTS(port) SIR_UART_PUT_IER(port, 0)
> +#define SIR_UART_STOP_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ETBEI); } while (0)
> +#define SIR_UART_ENABLE_TX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ETBEI); } while (0)
> +#define SIR_UART_STOP_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) & ~ERBFI); } while (0)
> +#define SIR_UART_ENABLE_RX(port) do { SIR_UART_PUT_IER(port, SIR_UART_GET_IER(port) | ERBFI); } while (0)
> +
> +static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
> +{
> + unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
> + port->lsr |= (lsr & (BI|FE|PE|OE));
> + return lsr | port->lsr;
> +}
> +
> +static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
> +{
> + port->lsr = 0;
> + bfin_read16(port->membase + OFFSET_LSR);
> +}
> +#endif
> +
> +static const unsigned short per[][4] = {
> + /* rx pin tx pin NULL uart_number */
> + {P_UART0_RX, P_UART0_TX, 0, 0},
> + {P_UART1_RX, P_UART1_TX, 0, 1},
> + {P_UART2_RX, P_UART2_TX, 0, 2},
> + {P_UART3_RX, P_UART3_TX, 0, 3},
> +};
> _
>
> Patches currently in -mm which might be from graff.yang@...il.com are
>
> irda-new-blackfin-on-chip-sir-irda-driver.patch
>
> --
> To unsubscribe from this list: send the line "unsubscribe mm-commits" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists