| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20090323182001.D30E.YAMAZAKI.SEIJI@kk.jp.panasonic.com>
Date: Mon, 23 Mar 2009 18:24:25 +0900
From: 山崎 精二
<yamazaki.seiji@...jp.panasonic.com>
To: avorontsov@...mvista.com, justinmattock@...il.com
Cc: yamazaki <yamazaki-seiji@...m.home.ne.jp>,
sdhci-devel@...t.drzeus.cx, Arnd Bergmann <arnd@...db.de>,
Liu Dave <DaveLiu@...escale.com>, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org, Ben Dooks <ben-linux@...ff.org>,
Pierre Ossman <drzeus-sdhci@...eus.cx>
Subject: Re: [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver
Hi
> The patch might be fine, but are you receiving this without the patch?
Befor patch,no sdhci-of.c found.
After patch,found sdhci-of.c.
> if you receive this with the patch then well there you go, but if this
> happens as a result with a clean fresh .tar.ball(vanilla kernel) then this
> is something
> else.
>
I got the kernel from
Well, then you need 2.6.29-rcX kernels, for example
http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
I do not know why so many errors when compile.
regards,
-- Seiji Yamazaki
On Mon, 23 Mar 2009 01:43:38 -0700 (PDT)
justinmattock@...il.com wrote:
> On Mon, 23 Mar 2009, ????? wrote:
>
> > Hi
> >
> > I tried again form first.
> >
> > I patched like this.
> >
> > [yama@...alhost Ippf]$ cd linux-2.6.29-rc8
> > [yama@...alhost linux-2.6.29-rc8]$ patch -p 1 <patch.txt
> > (Stripping trailing CRs from patch.)
> > patching file MAINTAINERS
> > Hunk #1 succeeded at 3839 (offset 2 lines).
> > (Stripping trailing CRs from patch.)
> > patching file drivers/mmc/host/Kconfig
> > Hunk #1 succeeded at 65 (offset -7 lines).
> > (Stripping trailing CRs from patch.)
> > patching file drivers/mmc/host/Makefile
> > (Stripping trailing CRs from patch.)
> > patching file drivers/mmc/host/sdhci-of.c
> > [yama@...alhost linux-2.6.29-rc8]$
>
> The patch might be fine, but are you receiving this without the patch?
>
> >
> > I Believe patch is OK.
> > And I got linux-2.6.29-rc8 kernel from kernel.org
> >
> >> What are the outcomes when not applying a patch?
> >>
> > Before applying a patch,sdhci-of.c was not exist in it.
> >
> > I attach the patch file?
> >
> > regards,
> >
> > -- Seiji Yamazaki
> >
> > On Mon, 23 Mar 2009 01:05:07 -0700 (PDT)
> > justinmattock@...il.com wrote:
> >
> >> On Mon, 23 Mar 2009, ????? wrote:
> >>
> >>> Hi
> >>>
> >>> Sorry about it.
> >>>
> >>>> On Mon, 23 Mar 2009, ????? wrote:
> >>>
> >>> ????? is Japanese language.
> >>>
> >>>> my guess is one of the header files has a changed definition
> >>>> and/or you're missing the file completely.
> >>>> (but could be wrong);
> >>>
> >>> I tried to grep SDHCI_QUIRK_FORCE_BLK_SZ_2048 on linux-2.6.29-rc8.
> >>> But no found execpt sdhci-of.c.
> >>> Does anybody know why?
> >>
> >> well I guess this is where you have to work from.
> >> (but then after contemplating you did add a patch right?)
> >>
> >>
> >>>
> >>> regards,
> >>>
> >>> -- Seiji Yamazaki
> >>>
> >>> On Mon, 23 Mar 2009 00:14:23 -0700 (PDT)
> >>> justinmattock@...il.com wrote:
> >>>
> >>>> On Mon, 23 Mar 2009, ????? wrote:
> >>>>
> >>>>> Hi
> >>>>>
> >>>>> I downloaded linux-2.6.29-rc8.tar.bz2,and I patched .
> >>>>> I was succeeded. Thank you very match.
> >>>>> But I have the other problem.
> >>>>>
> >>>>> Compile was not succeeded.
> >>>>>
> >>>>> Message is ...
> >>>>>
> >>>>> CALL arch/powerpc/kernel/prom_init_check.sh
> >>>>> CC drivers/mmc/host/sdhci-of.o
> >>>>> drivers/mmc/host/sdhci-of.c:163: error: 'SDHCI_QUIRK_FORCE_BLK_SZ_2048' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:164: error: 'SDHCI_QUIRK_BROKEN_CARD_DETECTION' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:165: error: 'SDHCI_QUIRK_INVERTED_WRITE_PROTECT' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:167: error: 'SDHCI_QUIRK_NONSTANDARD_CLOCK' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:168: error: 'SDHCI_QUIRK_PIO_NEEDS_DELAY' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:169: error: 'SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET' undeclared here (not in a function)
> >>>>> drivers/mmc/host/sdhci-of.c:172: error: unknown field 'readl' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:172: warning: initialization from incompatible pointer type
> >>>>> drivers/mmc/host/sdhci-of.c:173: error: unknown field 'readw' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:173: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:173: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:174: error: unknown field 'readb' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:174: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:174: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:175: error: unknown field 'writel' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:175: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:175: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:176: error: unknown field 'writew' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:176: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:176: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:177: error: unknown field 'writeb' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:177: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:177: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:178: error: unknown field 'set_clock' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:178: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:178: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:180: error: unknown field 'get_max_clock' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:180: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:180: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> drivers/mmc/host/sdhci-of.c:181: error: unknown field 'get_timeout_clock' specified in initializer
> >>>>> drivers/mmc/host/sdhci-of.c:181: warning: excess elements in struct initializer
> >>>>> drivers/mmc/host/sdhci-of.c:181: warning: (near initialization for 'sdhci_esdhc.ops')
> >>>>> make[3]: *** [drivers/mmc/host/sdhci-of.o] Error 1
> >>>>> make[2]: *** [drivers/mmc/host] Error 2
> >>>>> make[1]: *** [drivers/mmc] Error 2
> >>>>> make: *** [drivers] Error 2
> >>>>>
> >>>>> I do not know why. Could you please tell us why.
> >>>>> Thanks.
> >>>>>
> >>>>> On Sat, 21 Mar 2009 03:45:06 +0300
> >>>>> Anton Vorontsov <avorontsov@...mvista.com> wrote:
> >>>>>
> >>>>>> On Sat, Mar 21, 2009 at 09:15:25AM +0900, yamazaki wrote:
> >>>>>>> Hi
> >>>>>>>
> >>>>>>> Thank you for your reply.
> >>>>>>> I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device
> >>>>>>> which is probably new product.
> >>>>>>
> >>>>>> Ah, then it must be connected via MPC8347's localbus.
> >>>>>>
> >>>>>> Well, then you need 2.6.29-rcX kernels, for example
> >>>>>> http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
> >>>>>> is suitable.
> >>>>>>
> >>>>>> Untar it and apply the patches (they'll apply fine on that
> >>>>>> kernel). Then you'll need some device tree additions for
> >>>>>> your MPC8347 board, something like this:
> >>>>>>
> >>>>>> localbus@...05000 {
> >>>>>> #address-cells = <2>;
> >>>>>> #size-cells = <1>;
> >>>>>> compatible = "fsl,mpc8347-localbus",
> >>>>>> "fsl,pq2pro-localbus";
> >>>>>> reg = <0xe0005000 0xd8>;
> >>>>>> ranges = <0x1 0x0 0xf0000000 0x1000>;
> >>>>>> // ^^ change the 0xf0000000 to the actual address
> >>>>>> sdhci@1,0 {
> >>>>>> compatible = "ricoh,r5c807", "generic-sdhci";
> >>>>>> reg = <0x1 0x0 0x1000>;
> >>>>>> interrupts = <ricoh-interrupt-here 0x8>;
> >>>>>> interrupt-parent = <&ipic>;
> >>>>>> // if needed, clock-frequency = <freq-in-HZ-here>;
> >>>>>> };
> >>>>>> };
> >>>>>>
> >>>>>> Note that I'm not sure what endiannes you'll get when connecting
> >>>>>> the ricoh chip to the big-endinan host...
> >>>>>>
> >>>>>> --
> >>>>>> Anton Vorontsov
> >>>>>> email: cbouatmailru@...il.com
> >>>>>> irc://irc.freenode.net/bd2
> >>>>>
> >>>>> --
> >>>>> ????? <yamazaki.seiji@...jp.panasonic.com>
> >>>>>
> >>>>> --
> >>>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >>>>> the body of a message to majordomo@...r.kernel.org
> >>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>>>> Please read the FAQ at http://www.tux.org/lkml/
> >>>>>
> >>>>
> >>>> my guess is one of the header files has a changed definition
> >>>> and/or you're missing the file completely.
> >>>> (but could be wrong);
> >>>>
> >>>> regards,
> >>>>
> >>>> -- Justin P. Mattock
> >>>
> >>> --
> >>> ????? <yamazaki.seiji@...jp.panasonic.com>
> >>>
> >>>
> >>
> >> What are the outcomes when not applying a patch?
> >>
> >> regards,
> >>
> >>
> >> -- Justin P. Mattock
> >
> > --
> > ????? <yamazaki.seiji@...jp.panasonic.com>
> >
>
> if you receive this with the patch then well there you go, but if this
> happens as a result with a clean fresh .tar.ball(vanilla kernel) then this
> is something
> else.
>
> regards,
>
> -- Justin P. Mattock
--
<yamazaki.seiji@...jp.panasonic.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists