| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Mar 2009 15:34:45 +0900
From: 山崎 精二
<yamazaki.seiji@...jp.panasonic.com>
To: avorontsov@...mvista.com
Cc: yamazaki <yamazaki-seiji@...m.home.ne.jp>,
sdhci-devel@...t.drzeus.cx, Arnd Bergmann <arnd@...db.de>,
Liu Dave <DaveLiu@...escale.com>, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org, Ben Dooks <ben-linux@...ff.org>,
Pierre Ossman <drzeus-sdhci@...eus.cx>
Subject: Re: [PATCH 11/11] mmc: Add OpenFirmware bindings for SDHCI driver
Hi
I downloaded linux-2.6.29-rc8.tar.bz2,and I patched .
I was succeeded. Thank you very match.
But I have the other problem.
Compile was not succeeded.
Message is ...
CALL arch/powerpc/kernel/prom_init_check.sh
CC drivers/mmc/host/sdhci-of.o
drivers/mmc/host/sdhci-of.c:163: error: 'SDHCI_QUIRK_FORCE_BLK_SZ_2048' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:164: error: 'SDHCI_QUIRK_BROKEN_CARD_DETECTION' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:165: error: 'SDHCI_QUIRK_INVERTED_WRITE_PROTECT' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:167: error: 'SDHCI_QUIRK_NONSTANDARD_CLOCK' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:168: error: 'SDHCI_QUIRK_PIO_NEEDS_DELAY' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:169: error: 'SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET' undeclared here (not in a function)
drivers/mmc/host/sdhci-of.c:172: error: unknown field 'readl' specified in initializer
drivers/mmc/host/sdhci-of.c:172: warning: initialization from incompatible pointer type
drivers/mmc/host/sdhci-of.c:173: error: unknown field 'readw' specified in initializer
drivers/mmc/host/sdhci-of.c:173: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:173: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:174: error: unknown field 'readb' specified in initializer
drivers/mmc/host/sdhci-of.c:174: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:174: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:175: error: unknown field 'writel' specified in initializer
drivers/mmc/host/sdhci-of.c:175: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:175: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:176: error: unknown field 'writew' specified in initializer
drivers/mmc/host/sdhci-of.c:176: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:176: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:177: error: unknown field 'writeb' specified in initializer
drivers/mmc/host/sdhci-of.c:177: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:177: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:178: error: unknown field 'set_clock' specified in initializer
drivers/mmc/host/sdhci-of.c:178: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:178: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:180: error: unknown field 'get_max_clock' specified in initializer
drivers/mmc/host/sdhci-of.c:180: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:180: warning: (near initialization for 'sdhci_esdhc.ops')
drivers/mmc/host/sdhci-of.c:181: error: unknown field 'get_timeout_clock' specified in initializer
drivers/mmc/host/sdhci-of.c:181: warning: excess elements in struct initializer
drivers/mmc/host/sdhci-of.c:181: warning: (near initialization for 'sdhci_esdhc.ops')
make[3]: *** [drivers/mmc/host/sdhci-of.o] Error 1
make[2]: *** [drivers/mmc/host] Error 2
make[1]: *** [drivers/mmc] Error 2
make: *** [drivers] Error 2
I do not know why. Could you please tell us why.
Thanks.
On Sat, 21 Mar 2009 03:45:06 +0300
Anton Vorontsov <avorontsov@...mvista.com> wrote:
> On Sat, Mar 21, 2009 at 09:15:25AM +0900, yamazaki wrote:
> > Hi
> >
> > Thank you for your reply.
> > I know RICOH has PCI SD/MMC controller. But R5C807 RICOH is not the PCI device
> > which is probably new product.
>
> Ah, then it must be connected via MPC8347's localbus.
>
> Well, then you need 2.6.29-rcX kernels, for example
> http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
> is suitable.
>
> Untar it and apply the patches (they'll apply fine on that
> kernel). Then you'll need some device tree additions for
> your MPC8347 board, something like this:
>
> localbus@...05000 {
> #address-cells = <2>;
> #size-cells = <1>;
> compatible = "fsl,mpc8347-localbus",
> "fsl,pq2pro-localbus";
> reg = <0xe0005000 0xd8>;
> ranges = <0x1 0x0 0xf0000000 0x1000>;
> // ^^ change the 0xf0000000 to the actual address
> sdhci@1,0 {
> compatible = "ricoh,r5c807", "generic-sdhci";
> reg = <0x1 0x0 0x1000>;
> interrupts = <ricoh-interrupt-here 0x8>;
> interrupt-parent = <&ipic>;
> // if needed, clock-frequency = <freq-in-HZ-here>;
> };
> };
>
> Note that I'm not sure what endiannes you'll get when connecting
> the ricoh chip to the big-endinan host...
>
> --
> Anton Vorontsov
> email: cbouatmailru@...il.com
> irc://irc.freenode.net/bd2
--
山崎 精二 <yamazaki.seiji@...jp.panasonic.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists