[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4A0AB0EC.5010902@grandegger.com>
Date: Wed, 13 May 2009 13:37:16 +0200
From: Wolfgang Grandegger <wg@...ndegger.com>
To: Andrew Morton <akpm@...ux-foundation.org>
CC: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Oliver Hartkopp <oliver.hartkopp@...kswagen.de>
Subject: Re: [PATCH v2 3/7] [PATCH 3/8] can: CAN Network device driver and
Netlink interface
Andrew Morton wrote:
> On Tue, 12 May 2009 23:30:52 -0700 Andrew Morton <akpm@...ux-foundation.org> wrote:
>
>> On Tue, 12 May 2009 11:28:00 +0200 Wolfgang Grandegger <wg@...ndegger.com> wrote:
>>
>>> +int can_restart_now(struct net_device *dev)
>>> +{
>>> + struct can_priv *priv = netdev_priv(dev);
>>> + struct net_device_stats *stats = &dev->stats;
>>> + struct sk_buff *skb;
>>> + struct can_frame *cf;
>>> + int err;
>>> +
>>> + /* Synchronize with dev->hard_start_xmit() */
>>> + netif_tx_lock(dev);
>>> +
>>> + /* Ensure that no more messages can go out */
>>> + if (netif_carrier_ok(dev))
>>> + netif_carrier_off(dev);
>>> +
>>> + /* Ensure that no more messages can come in */
>>> + err = priv->do_set_mode(dev, CAN_MODE_STOP);
>>> + if (err)
>>> + return err;
>>> +
>>> + /* Now it's save to clean up */
>>> + del_timer_sync(&priv->restart_timer);
>> This is deadlockable.
>>
>> It calls del_timer_sync() while holding netif_tx_lock(). But the timer
>> handler (can_restart_now()) also takes netif_tx_lock(). So if the
>> timer handler is presently running, it's sitting there spinning in
>> netif_tx_lock(). And del_timer_sync() is sitting there waiting for the
>> timer handler to complete.
Oops, I have obviously overlook that.
> Also, I wonder if it's safe to take netif_tx_lock() from a timer
> handler when other parts of the code might be taking it from process
> context (I didn't check).
>
> lockdep should be able to detect this, and I trust this code has been
> fully runtime tested with lockdep enabled?
Well, CONFIG_PROVE_LOCKING would be cool, but I'm unable to enabled it
for my MPC5200 test system. Only 64bit PowerPC's seem to support
TRACE_IRQFLAGS_SUPPORT. I'm going to test the code on a PC as well.
Thanks,
Wolfgang.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists