lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4A0AB17B.3080308@grandegger.com>
Date:	Wed, 13 May 2009 13:39:39 +0200
From:	Wolfgang Grandegger <wg@...ndegger.com>
To:	Oliver Hartkopp <oliver.hartkopp@...kswagen.de>
CC:	Andrew Morton <akpm@...ux-foundation.org>, netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/7] [PATCH 3/8] can: CAN Network device driver and
 Netlink interface

Oliver Hartkopp wrote:
> Andrew Morton wrote:
>> On Tue, 12 May 2009 11:28:00 +0200 Wolfgang Grandegger
>> <wg@...ndegger.com> wrote:
>>
>>  
>>> +int can_restart_now(struct net_device *dev)
>>> +{
>>> +    struct can_priv *priv = netdev_priv(dev);
>>> +    struct net_device_stats *stats = &dev->stats;
>>> +    struct sk_buff *skb;
>>> +    struct can_frame *cf;
>>> +    int err;
>>> +
>>> +    /* Synchronize with dev->hard_start_xmit() */
>>> +    netif_tx_lock(dev);
>>> +
>>> +    /* Ensure that no more messages can go out */
>>> +    if (netif_carrier_ok(dev))
>>> +        netif_carrier_off(dev);
>>> +
>>> +    /* Ensure that no more messages can come in */
>>> +    err = priv->do_set_mode(dev, CAN_MODE_STOP);
>>> +    if (err)
>>> +        return err;
>>> +
>>> +    /*  Now it's save to clean up */
>>> +    del_timer_sync(&priv->restart_timer);
>>>     
>>
>> This is deadlockable.
>>
>> It calls del_timer_sync() while holding netif_tx_lock().  But the timer
>> handler (can_restart_now()) also takes netif_tx_lock().  So if the
>> timer handler is presently running, it's sitting there spinning in
>> netif_tx_lock().  And del_timer_sync() is sitting there waiting for the
>> timer handler to complete.
>>
>>
>>   
> 
> Hi Wolfgang,
> 
> would it be an appropriate solution, just to invoke
> 
> netif_stop_queue() in can_bus_off()
> 
> and invoke
> 
> netif_wake_queue() in can_restart_now()
> 
> ???
> 
> In a BUSOFF condition we're not able to send CAN frames anyway, so  we
> can disable the device queue and the we won't  need any netif_tx_lock()
> right?
> 
> AFAIK this was the original implementation before some of the latest
> improvement with the netif_carrier stuff.
> 
> What do you think?

The problem is the "manual" restart triggered via the netlink interface,
which can occur in the middle of ndo_start_xmit().

Wolfgang.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ