linux-kernel - Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 NAND driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <47286.192.168.10.89.1244108023.squirrel@dbdmail.itg.ti.com>
Date:	Thu, 4 Jun 2009 15:03:43 +0530 (IST)
From:	"vimal singh" <vimalsingh@...com>
To:	"Tony Lindgren" <tony@...mide.com>
Cc:	linux-mtd@...ts.infradead.org, dwmw2@...radead.org,
	dedekind@...radead.org, david-b@...bell.net,
	linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org
Subject: Re: [PATCH] [MTD] [NAND] Add prefetch and dma support for omap2/3 
     NAND      driver

On Wed, Jun 3, 2009 at 10:03 PM, Tony Lindgren <tony@...mide.com> wrote:
> * Singh, Vimal
<IMCEAEX-_O=TI_OU=BD_CN=RECIPIENTS_CN=X0094262@...e86.itg.ti.com> [090602
23:46]:
>>
>> On Wed, Jun 3, 2009 at 2:06 AM, Tony Lindgren <tony@...mide.com> wrote:
>> > * vimal singh <vimalsingh@...com> [090602 05:40]:
>> >> This patch adds prefetch support to access nand flash in both mpu and dma
mode.
>> >> This patch also adds 8-bit nand support (omap_read/write_buf8).
>> >> Prefetch can be used for both 8- and 16-bit devices.
>> >
>> > This should be reviewed on the linux-omap@...r.kernel.org list for sure.
>> > One other comment below.
>> >
>> >> Signed-off-by: Vimal Singh <vimalsingh@...com>
>> >> ---
>> >> I prepared this patch on top of "OMAP2 / OMAP3 NAND driver" patch:
>> >> http://lists.infradead.org/pipermail/linux-mtd/2009-May/025562.html
>> >>
>> >> ---
>> >>  arch/arm/mach-omap2/gpmc.c             |  102 ++++++++++
>> >>  arch/arm/plat-omap/include/mach/gpmc.h |    4
>> >>  drivers/mtd/nand/Kconfig               |   17 +
>> >>  drivers/mtd/nand/omap2.c               |  308
++++++++++++++++++++++++++++++++-
>> >>  4 files changed, 422 insertions(+), 9 deletions(-)
>> >>
>> >> Index: mtd-2.6/arch/arm/mach-omap2/gpmc.c
>> >> ===================================================================
>> >> --- mtd-2.6.orig/arch/arm/mach-omap2/gpmc.c
>> >> +++ mtd-2.6/arch/arm/mach-omap2/gpmc.c
>> >> @@ -54,6 +54,12 @@
>> >>  #define GPMC_CHUNK_SHIFT     24              /* 16 MB */
>> >>  #define GPMC_SECTION_SHIFT   28              /* 128 MB */
>> >>
>> >> +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
>> >> +#define CS_NUM_SHIFT         24
>> >> +#define ENABLE_PREFETCH              7
>> >> +#define DMA_MPU_MODE         2
>> >> +#endif
>> >> +
>> >>  static struct resource       gpmc_mem_root;
>> >>  static struct resource       gpmc_cs_mem[GPMC_CS_NUM];
>> >>  static DEFINE_SPINLOCK(gpmc_mem_lock);
>> >> @@ -383,6 +389,99 @@ void gpmc_cs_free(int cs)
>> >>  }
>> >>  EXPORT_SYMBOL(gpmc_cs_free);
>> >>
>> >> +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
>> >> +/**
>> >> + * gpmc_prefetch_init - configures default configuration for prefetch
engine
>> >> + */
>> >> +static void gpmc_prefetch_init(void)
>> >> +{
>> >> +     /* Setting the default threshold to 64 */
>> >> +     gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
>> >> +     gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x40  << 8);
>> >> +     gpmc_write_reg(GPMC_PREFETCH_CONFIG2, 0x0);
>> >> +}
>> >
>> > Why would you want to have NAND specific init code int gpmc.c?
>> >
>> > The purpose if gpmc.c is to provide access to configuring the
>> > General Purpose Memory Controller (GPMC). You should just provide
>> > functions in gpmc.c for the platform init code to use, and then
>> > the drivers can stay platform independent.
>>
>> In my understanding, this 'prefetch' engine is part of GPMC itself, it is a
>> kind of feature provided by GPMC which can be utilized by NAND driver.
>> So, to me, it makes sens to get initialized prefetch by GPMC itself so that
>> NAND driver can use it.
>
> But it should not have a dependency to NAND.

This engine, in GPMC, is dedicated for NAND devices only.

>
>> Another reason was that all read / write to GPMC register are done by
>> functions 'gpmc_read_reg' / 'gpmc_write_reg', which have been made
>> 'static' in nature.
>
> That's why you need to provide a generic function in gpmc.c to enable
> prefetch that the platform code for any driver can use.

Exactly, and whenever a platform code uses gpmc init call, gpmc initializes
this engine too. Since prefetch engine is the part of GPMC, IMHOP, it should
get initialized as part of GPMC initialization.

And then there are prefetch start, stop and status functions calls have been
provided to be used by NAND driver.

-vimal
>
> Tony


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/