linux-kernel - ACPI issues on HP DL585 G2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:	Sat, 27 Jun 2009 23:40:38 -0400
From:	Stephen Frost <sfrost@...wman.net>
To:	linux-kernel@...r.kernel.org
Subject: ACPI issues on HP DL585 G2

Greetings,

  When running pretty much anything newer than 2.6.22, both the cciss
  module and the bnx2 module get stuck in a "Loading" state in
  /proc/modules.  As cciss contains my root partition, I get dropped
  into an initrd after a while because root can't be found.  After some
  googleing, etc, I saw a bunch of recommendations to add
  "pci=noapic noapic" to the command-line.  After I did that, the box
  booted fine under 2.6.29.  I figured people might like to hear about
  this issue though.  Attached are a dmesg from 2.6.22 and a dmesg from
  2.6.29 (w/ the noapic options).  I've also included the output of
  hpasmcli -s "show server".  If there's anything else that would be
  useful to help figure this out, please let me know.

  	Thanks,

		Stephen

View attachment "dmesg-acpi" of type "text/plain" (27261 bytes)

View attachment "dmesg-no-acpi" of type "text/plain" (57076 bytes)

View attachment "lspci-output" of type "text/plain" (3549 bytes)

View attachment "proc-interrupts" of type "text/plain" (2660 bytes)

View attachment "server-info" of type "text/plain" (1108 bytes)