| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1249104348.7146.60.camel@marge.simson.net> Date: Sat, 01 Aug 2009 07:25:48 +0200 From: Mike Galbraith <efault@....de> To: linux-wireless <linux-wireless@...r.kernel.org> Cc: LKML <linux-kernel@...r.kernel.org>, "John W. Linville" <linville@...driver.com> Subject: rt2800usb: memory corruption? Greetings, Fiddling with my box's builtin usb wireless adapter with the rt2x00 driver in .git.today to tinker with associate problem. On Thu, 2009-07-30 at 14:12 +0200, Mike Galbraith wrote: > This is nogo with rt2x00 driver fwiw. Maybe some simple configuration > thing, but I'm having no luck getting the bugger to work. > > [ 12.942335] phy0: Selected rate control algorithm 'minstrel' > [ 12.942440] Registered led device: rt2800usb-phy0::radio > [ 12.955279] Registered led device: rt2800usb-phy0::assoc > [ 12.968003] Registered led device: rt2800usb-phy0::quality > [ 12.981183] usbcore: registered new interface driver rt2800usb > > [ 33.032056] rt2800usb 1-5:1.0: firmware: requesting rt2870.bin > [ 33.161552] input: rt2800usb as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input4 > [ 33.347130] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 34.513078] eth0: no IPv6 routers present > [ 35.935289] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 > [ 35.937306] wlan0: authenticated > [ 35.937309] wlan0: associate with AP 00:1a:4f:9a:d0:12 > [ 35.942551] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) > [ 35.942555] wlan0: associated > [ 35.950948] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 37.314470] mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary > [ 39.937271] wlan0: deauthenticated (Reason: 1) snip repeat forever... (My association problem seems to have improved markedly. It's a little wobbly as you can see in the dmesg output below, but does associate, and I can ping router. Can't use nic yet though, seems to be kinda limping along.. shrug, progress) Anyway, while piddling with above woes previously, I encountered a few hard lockups while doing down/rmmod/modprobe cycles. I encountered the below (box survived this time obviously:) on third attempt this morning. Full boot->boom [ 0.000000] Linux version 2.6.31-smp (root@...ge) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1001 SMP Sat Aug 1 05:44:28 CEST 2009 [ 0.000000] Command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG2LA0M-part3 resume=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG2LA0M-part2 splash=silent console=ttyS0,115200n8 console=tty showopts vga=0x31a [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe90000 (usable) [ 0.000000] BIOS-e820: 00000000bfe90000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0xbfe90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM coverred: 3071M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe90000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfe90000 page 4k [ 0.000000] kernel direct mapping tables up to bfe90000 @ 8000-d000 [ 0.000000] RAMDISK: 376b0000 - 37fefd3f [ 0.000000] ACPI: RSDP 00000000000f7f20 00014 (v00 MEDION) [ 0.000000] ACPI: RSDT 00000000bfee3000 0003C (v01 MEDION MEDIONAG 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000bfee3080 00074 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000bfee3100 04243 (v01 MEDION AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000bfe90000 00040 [ 0.000000] ACPI: HPET 00000000bfee75c0 00038 (v01 MEDION MEDIONAG 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000bfee7600 0003C (v01 MEDION MEDIONAG 42302E31 AWRD 00000000) [ 0.000000] ACPI: SLIC 00000000bfee7380 00176 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000bfee7500 00084 (v01 MEDION MEDIONAG 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 00000000bfee7f60 00380 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bfe90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00014c3f40] TEXT DATA BSS ==> [0001000000 - 00014c3f40] [ 0.000000] #3 [00376b0000 - 0037fefd3f] RAMDISK ==> [00376b0000 - 0037fefd3f] [ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000] [ 0.000000] #5 [00014c4000 - 00014c40ca] BRK ==> [00014c4000 - 00014c40ca] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f3d20] f3d20 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001a00000-ffff8800043fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bfe90 [ 0.000000] On node 0 totalpages: 785966 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3839 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10691 pages used for memmap [ 0.000000] DMA32 zone: 771277 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages at ffff8800014e1000, static data 80224 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775116 [ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG2LA0M-part3 resume=/dev/disk/by-id/scsi-SATA_ST3400620AS_6QG2LA0M-part2 splash=silent console=ttyS0,115200n8 console=tty showopts vga=0x31a [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3078992k/3144256k available (2576k kernel code, 392k absent, 64140k reserved, 1281k data, 392k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:384 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2392.678 MHz processor. [ 0.000025] Console: colour dummy device 80x25 [ 0.000028] console [tty0] enabled [ 0.000217] console [ttyS0] enabled [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.35 BogoMIPS (lpj=9570712) [ 0.012016] Security Framework initialized [ 0.016010] Mount-cache hash table entries: 256 [ 0.020133] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.025658] CPU: L2 cache: 4096K [ 0.028003] CPU: Physical Processor ID: 0 [ 0.032003] CPU: Processor Core ID: 0 [ 0.036004] mce: CPU supports 6 MCE banks [ 0.040008] CPU0: Thermal monitoring enabled (TM2) [ 0.044004] using mwait in idle threads. [ 0.048003] Performance Counters: Core2 events, Intel PMU driver. [ 0.056003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.064003] ... generic counters: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.072002] ... max period: 000000007fffffff [ 0.076003] ... fixed-purpose counters: 3 [ 0.080003] ... counter mask: 0000000700000003 [ 0.084018] ACPI: Core revision 20090521 [ 0.096048] Setting APIC routing to flat [ 0.100358] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.144141] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.152001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4784.95 BogoMIPS (lpj=9569919) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.244492] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.253233] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.256084] Booting processor 2 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4784.99 BogoMIPS (lpj=9569985) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.352524] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.361233] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.364061] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4785.00 BogoMIPS (lpj=9570001) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.460516] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.469231] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.472021] Brought up 4 CPUs [ 0.476003] Total of 4 processors activated (19140.30 BogoMIPS). [ 0.480050] CPU0 attaching sched-domain: [ 0.480053] domain 0: span 0-1 level MC [ 0.480054] groups: 0 1 [ 0.480058] domain 1: span 0-3 level CPU [ 0.480060] groups: 0-1 2-3 [ 0.480064] CPU1 attaching sched-domain: [ 0.480065] domain 0: span 0-1 level MC [ 0.480067] groups: 1 0 [ 0.480070] domain 1: span 0-3 level CPU [ 0.480072] groups: 0-1 2-3 [ 0.480075] CPU2 attaching sched-domain: [ 0.480077] domain 0: span 2-3 level MC [ 0.480079] groups: 2 3 [ 0.480081] domain 1: span 0-3 level CPU [ 0.480083] groups: 2-3 0-1 [ 0.480087] CPU3 attaching sched-domain: [ 0.480088] domain 0: span 2-3 level MC [ 0.480090] groups: 3 2 [ 0.480093] domain 1: span 0-3 level CPU [ 0.480095] groups: 2-3 0-1 [ 0.480130] NET: Registered protocol family 16 [ 0.484041] ACPI: bus type pci registered [ 0.492047] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.496003] PCI: MCFG area at e0000000 reserved in E820 [ 0.502601] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.504003] PCI: Using configuration type 1 for base access [ 0.508029] bio: create slab <bio-0> at 0 [ 0.516420] ACPI: EC: Look up EC in DSDT [ 0.521746] ACPI: Interpreter enabled [ 0.524004] ACPI: (supports S0 S3 S4 S5) [ 0.529116] ACPI: Using IOAPIC for interrupt routing [ 0.540159] ACPI: No dock devices found. [ 0.544094] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.548083] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.552004] pci 0000:00:01.0: PME# disabled [ 0.556076] pci 0000:00:19.0: reg 10 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.556083] pci 0000:00:19.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff] [ 0.556089] pci 0000:00:19.0: reg 18 io port: [0xff00-0xff1f] [ 0.556134] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.560005] pci 0000:00:19.0: PME# disabled [ 0.564055] pci 0000:00:1a.0: reg 20 io port: [0xfe00-0xfe1f] [ 0.564129] pci 0000:00:1a.1: reg 20 io port: [0xfd00-0xfd1f] [ 0.564203] pci 0000:00:1a.2: reg 20 io port: [0xfc00-0xfc1f] [ 0.564277] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff] [ 0.564330] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.568005] pci 0000:00:1a.7: PME# disabled [ 0.572045] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff4000-0xfdff7fff] [ 0.572093] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.576005] pci 0000:00:1b.0: PME# disabled [ 0.580055] pci 0000:00:1d.0: reg 20 io port: [0xfb00-0xfb1f] [ 0.580130] pci 0000:00:1d.1: reg 20 io port: [0xfa00-0xfa1f] [ 0.580203] pci 0000:00:1d.2: reg 20 io port: [0xf900-0xf91f] [ 0.580277] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffd000-0xfdffd3ff] [ 0.580330] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.584005] pci 0000:00:1d.7: PME# disabled [ 0.588124] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.592004] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.596004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) [ 0.600004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 001f) [ 0.604071] pci 0000:00:1f.2: reg 10 io port: [0xf800-0xf807] [ 0.604078] pci 0000:00:1f.2: reg 14 io port: [0xf700-0xf703] [ 0.604084] pci 0000:00:1f.2: reg 18 io port: [0xf600-0xf607] [ 0.604091] pci 0000:00:1f.2: reg 1c io port: [0xf500-0xf503] [ 0.604096] pci 0000:00:1f.2: reg 20 io port: [0xf400-0xf41f] [ 0.604102] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdffc000-0xfdffc7ff] [ 0.604139] pci 0000:00:1f.2: PME# supported from D3hot [ 0.608005] pci 0000:00:1f.2: PME# disabled [ 0.612034] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffb000-0xfdffb0ff] [ 0.612049] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.612095] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.612103] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.612111] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.612116] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f] [ 0.612121] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.612232] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.612235] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.612239] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.612271] pci 0000:02:00.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff] [ 0.612315] pci 0000:02:00.0: supports D1 D2 [ 0.612349] pci 0000:02:02.0: reg 10 32bit mmio: [0xfddfe000-0xfddfe7ff] [ 0.612356] pci 0000:02:02.0: reg 14 io port: [0xcf00-0xcf7f] [ 0.612395] pci 0000:02:02.0: supports D2 [ 0.612397] pci 0000:02:02.0: PME# supported from D2 D3hot D3cold [ 0.616005] pci 0000:02:02.0: PME# disabled [ 0.620043] pci 0000:00:1e.0: transparent bridge [ 0.624005] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.624009] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.624016] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.624025] pci_bus 0000:00: on NUMA node 0 [ 0.624030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.624178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.636783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.642775] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.651182] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.658595] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.665848] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.673210] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.680375] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.686792] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.690719] PCI: Using ACPI for IRQ routing [ 0.712009] NetLabel: Initializing [ 0.715402] NetLabel: domain hash size = 128 [ 0.716003] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.720013] NetLabel: unlabeled traffic allowed by default [ 0.724037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.729217] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.744007] Switched to high resolution mode on CPU 0 [ 0.745632] Switched to high resolution mode on CPU 1 [ 0.747354] Switched to high resolution mode on CPU 3 [ 0.747386] Switched to high resolution mode on CPU 2 [ 0.764029] pnp: PnP ACPI init [ 0.767082] ACPI: bus type pnp registered [ 0.774109] pnp: PnP ACPI: found 14 devices [ 0.778290] ACPI: ACPI bus type pnp unregistered [ 0.782910] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.789256] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.795603] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.801958] system 00:0a: ioport range 0x400-0x4bf could not be reserved [ 0.808653] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.815781] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved [ 0.822733] system 00:0d: iomem range 0xbff00000-0xbfffffff could not be reserved [ 0.830207] system 00:0d: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.837334] system 00:0d: iomem range 0xbfe90000-0xbfefffff could not be reserved [ 0.844810] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.851417] system 00:0d: iomem range 0x100000-0xbfe8ffff could not be reserved [ 0.858720] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.866194] system 00:0d: iomem range 0xfed14000-0xfed1dfff has been reserved [ 0.873320] system 00:0d: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.880445] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.887571] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.894697] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved [ 0.901823] system 00:0d: iomem range 0xe0000-0xeffff has been reserved [ 0.913493] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.919412] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.924721] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff [ 0.930809] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.938370] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.944284] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.949593] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff [ 0.955681] pci 0000:00:1e.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.963249] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.969945] pci 0000:00:01.0: setting latency timer to 64 [ 0.969951] pci 0000:00:1e.0: setting latency timer to 64 [ 0.969955] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.969957] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.969959] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.969961] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.969963] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.969966] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.969968] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.969970] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.969972] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.969974] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.969985] NET: Registered protocol family 2 [ 0.974362] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.981921] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.991156] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.998438] TCP: Hash tables configured (established 262144 bind 65536) [ 1.005048] TCP reno registered [ 1.008268] NET: Registered protocol family 1 [ 1.012675] Unpacking initramfs... [ 1.215828] Freeing initrd memory: 9471k freed [ 1.225337] audit: initializing netlink socket (disabled) [ 1.230763] type=2000 audit(1249105647.228:1): initialized [ 1.236663] msgmni has been set to 6033 [ 1.240786] alg: No test for stdrng (krng) [ 1.244978] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 1.252369] io scheduler noop registered [ 1.256291] io scheduler anticipatory registered [ 1.260903] io scheduler deadline registered [ 1.265169] io scheduler cfq registered (default) [ 1.270003] pci 0000:01:00.0: Boot video device [ 1.270148] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.270153] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.270592] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010100000, using 5120k, total 14336k [ 1.279894] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 1.286067] vesafb: scrolling: redraw [ 1.289725] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.315581] Console: switching to colour frame buffer device 160x64 [ 1.340933] fb0: VESA VGA frame buffer device [ 1.357347] Non-volatile memory driver v1.3 [ 1.361635] Linux agpgart interface v0.103 [ 1.365822] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.372461] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.378750] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.385063] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.392844] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.398767] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.404821] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.411143] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.421009] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.428531] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.433711] mice: PS/2 mouse device common for all mice [ 1.439194] cpuidle: using governor ladder [ 1.443411] cpuidle: using governor menu [ 1.447450] IPv4 over IPv4 tunneling driver [ 1.451823] GRE over IPv4 tunneling driver [ 1.456151] TCP bic registered [ 1.459260] TCP cubic registered [ 1.462565] TCP westwood registered [ 1.462808] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.474918] TCP highspeed registered [ 1.478571] TCP hybla registered [ 1.481867] TCP htcp registered [ 1.485078] TCP vegas registered [ 1.488376] TCP veno registered [ 1.491578] TCP scalable registered [ 1.495149] TCP lp registered [ 1.498182] TCP yeah registered [ 1.501392] TCP illinois registered [ 1.504959] NET: Registered protocol family 17 [ 1.509743] registered taskstats version 1 [ 1.514091] Freeing unused kernel memory: 392k freed [ 1.559855] SCSI subsystem initialized [ 1.578604] libata version 3.00 loaded. [ 1.581353] ahci 0000:00:1f.2: version 3.0 [ 1.581372] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.591693] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X [ 1.591720] ahci: SSS flag set, parallel bus scan disabled [ 1.600808] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.612742] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems [ 1.625427] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.664078] scsi0 : ahci [ 1.670606] scsi1 : ahci [ 1.677112] scsi2 : ahci [ 1.683687] scsi3 : ahci [ 1.690265] scsi4 : ahci [ 1.696875] scsi5 : ahci [ 1.703481] ata1: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc100 irq 25 [ 1.715064] ata2: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc180 irq 25 [ 1.726664] ata3: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc200 irq 25 [ 1.738271] ata4: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc280 irq 25 [ 1.749892] ata5: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc300 irq 25 [ 1.761530] ata6: SATA max UDMA/133 abar m2048@...dffc000 port 0xfdffc380 irq 25 [ 2.256023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.282973] ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133 [ 2.294272] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.306306] ata1.00: configured for UDMA/133 [ 2.328129] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5 [ 3.228015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.241573] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100 [ 3.256187] ata2.00: configured for UDMA/100 [ 3.394872] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5 [ 3.728025] ata3: SATA link down (SStatus 0 SControl 300) [ 4.072025] ata4: SATA link down (SStatus 0 SControl 300) [ 4.984022] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.037531] ata5.00: ATA-7: ST3400620AS, 3.AAK, max UDMA/133 [ 5.048128] ata5.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.095852] ata5.00: configured for UDMA/133 [ 5.120595] scsi 4:0:0:0: Direct-Access ATA ST3400620AS 3.AA PQ: 0 ANSI: 5 [ 5.452025] ata6: SATA link down (SStatus 0 SControl 300) [ 5.490753] fan PNP0C0B:00: registered as cooling_device0 [ 5.501051] ACPI: Fan [FAN] (on) [ 5.510844] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found [ 5.529665] udevd version 128 started [ 5.574594] usbcore: registered new interface driver usbfs [ 5.576922] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.576957] sd 0:0:0:0: [sda] Write Protect is off [ 5.576959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.576976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.577087] sda: [ 5.577140] sd 4:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 5.577170] sd 4:0:0:0: [sdb] Write Protect is off [ 5.577172] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.577189] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.577266] sdb: sda1 sda2 < sdb1 sdb2 sdb3 [ 5.677913] sda5 [ 5.678174] usbcore: registered new interface driver hub [ 5.678212] usbcore: registered new device driver usb [ 5.706322] > [ 5.713557] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.723909] sd 4:0:0:0: [sdb] Attached SCSI disk [ 5.736415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.737881] uhci_hcd: USB Universal Host Controller Interface driver [ 5.737914] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.737924] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5.737928] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 5.737959] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.737997] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 [ 5.738036] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.738038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.738039] usb usb1: Product: UHCI Host Controller [ 5.738041] usb usb1: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.738042] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.738107] usb usb1: configuration #1 chosen from 1 choice [ 5.738132] hub 1-0:1.0: USB hub found [ 5.738137] hub 1-0:1.0: 2 ports detected [ 5.738197] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.738203] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.738206] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.738212] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 5.738241] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00 [ 5.738268] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.738270] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.738271] usb usb2: Product: UHCI Host Controller [ 5.738273] usb usb2: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.738274] usb usb2: SerialNumber: 0000:00:1a.1 [ 5.738309] usb usb2: configuration #1 chosen from 1 choice [ 5.738331] hub 2-0:1.0: USB hub found [ 5.738335] hub 2-0:1.0: 2 ports detected [ 5.738387] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5.738392] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5.738395] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.738400] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 5.738428] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00 [ 5.738455] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.738457] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.738459] usb usb3: Product: UHCI Host Controller [ 5.738460] usb usb3: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.738462] usb usb3: SerialNumber: 0000:00:1a.2 [ 5.738498] usb usb3: configuration #1 chosen from 1 choice [ 5.738519] hub 3-0:1.0: USB hub found [ 5.738523] hub 3-0:1.0: 2 ports detected [ 5.738576] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.738581] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.738583] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.738590] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 5.738617] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00 [ 5.738644] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.738646] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.738648] usb usb4: Product: UHCI Host Controller [ 5.738649] usb usb4: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.738650] usb usb4: SerialNumber: 0000:00:1d.0 [ 5.738686] usb usb4: configuration #1 chosen from 1 choice [ 5.738707] hub 4-0:1.0: USB hub found [ 5.738712] hub 4-0:1.0: 2 ports detected [ 5.738763] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.738768] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.738771] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.738777] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 5.738798] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 [ 5.738826] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.738827] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.738829] usb usb5: Product: UHCI Host Controller [ 5.738830] usb usb5: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.738832] usb usb5: SerialNumber: 0000:00:1d.1 [ 5.738871] usb usb5: configuration #1 chosen from 1 choice [ 5.738892] hub 5-0:1.0: USB hub found [ 5.738896] hub 5-0:1.0: 2 ports detected [ 5.738961] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.738966] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.738969] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.738975] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 5.739003] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900 [ 5.739032] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.739034] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.739036] usb usb6: Product: UHCI Host Controller [ 5.739037] usb usb6: Manufacturer: Linux 2.6.31-smp uhci_hcd [ 5.739038] usb usb6: SerialNumber: 0000:00:1d.2 [ 5.739074] usb usb6: configuration #1 chosen from 1 choice [ 5.739097] hub 6-0:1.0: USB hub found [ 5.739101] hub 6-0:1.0: 2 ports detected [ 6.052028] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 6.577549] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 6.591746] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.605662] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 6.605666] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 6.616297] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 6.633155] ehci_hcd 0000:00:1a.7: debug port 1 [ 6.643063] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 6.643070] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000 [ 6.669028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.680114] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.692320] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.695960] usb 1-1: New USB device found, idVendor=0424, idProduct=2228 [ 6.695962] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.696040] usb 1-1: configuration #1 chosen from 1 choice [ 6.740790] usb usb7: Product: EHCI Host Controller [ 6.751201] usb usb7: Manufacturer: Linux 2.6.31-smp ehci_hcd [ 6.762390] usb usb7: SerialNumber: 0000:00:1a.7 [ 6.772391] usb 1-1: can't set config #1, error -71 [ 6.773591] usb usb7: configuration #1 chosen from 1 choice [ 6.773650] hub 7-0:1.0: USB hub found [ 6.773656] hub 7-0:1.0: 6 ports detected [ 6.773762] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.773775] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.773777] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.773784] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 6.777681] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.777687] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.777693] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000 [ 6.793505] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.793519] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.793521] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.793522] usb usb8: Product: EHCI Host Controller [ 6.793524] usb usb8: Manufacturer: Linux 2.6.31-smp ehci_hcd [ 6.793525] usb usb8: SerialNumber: 0000:00:1d.7 [ 6.793603] usb usb8: configuration #1 chosen from 1 choice [ 6.793659] hub 8-0:1.0: USB hub found [ 6.793664] hub 8-0:1.0: 6 ports detected [ 7.041563] PM: Starting manual resume from disk [ 7.349052] usb 1-1: USB disconnect, address 2 [ 7.404015] kjournald starting. Commit interval 5 seconds [ 7.413278] EXT3 FS on sdb3, internal journal [ 7.413282] EXT3-fs: mounted filesystem with writeback data mode. [ 7.612022] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 7.846541] usb 7-1: New USB device found, idVendor=0424, idProduct=2228 [ 7.859635] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.873182] usb 7-1: Product: Flash Card Reader [ 7.884102] usb 7-1: Manufacturer: Generic [ 7.894551] usb 7-1: SerialNumber: 000022272228 [ 7.905540] usb 7-1: configuration #1 chosen from 1 choice [ 8.028017] usb 7-5: new high speed USB device using ehci_hcd and address 3 [ 8.194265] usb 7-5: New USB device found, idVendor=13d3, idProduct=3247 [ 8.207305] usb 7-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.220814] usb 7-5: Product: 802.11 n WLAN [ 8.220817] usb 7-5: Manufacturer: Ralink [ 8.220818] usb 7-5: SerialNumber: 1.0 [ 8.220889] usb 7-5: configuration #1 chosen from 1 choice [ 8.576040] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 8.766250] usb 3-2: New USB device found, idVendor=0bc7, idProduct=0006 [ 8.779297] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.792772] usb 3-2: Product: RF receiver [ 8.803060] usb 3-2: Manufacturer: X10 WTI [ 8.803143] usb 3-2: configuration #1 chosen from 1 choice [ 9.040043] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 9.236787] usb 6-2: New USB device found, idVendor=045e, idProduct=008c [ 9.250028] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.263700] usb 6-2: Product: Microsoft Wireless Optical Mouse® 1.0A [ 9.276787] usb 6-2: Manufacturer: Microsoft [ 9.276867] usb 6-2: configuration #1 chosen from 1 choice [ 9.611118] udevd version 128 started [ 10.326338] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.338336] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 10.350663] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 10.425520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 10.439936] ACPI: Power Button [PWRF] [ 10.450448] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 10.465527] ACPI: Power Button [PWRB] [ 11.193089] ACPI: SSDT 00000000bfee7680 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 11.208404] processor LNXCPU:00: registered as cooling_device1 [ 11.221362] ACPI: SSDT 00000000bfee7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203) [ 11.236900] processor LNXCPU:01: registered as cooling_device2 [ 11.252901] ACPI: SSDT 00000000bfee7ca0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20041203) [ 11.268429] processor LNXCPU:02: registered as cooling_device3 [ 11.268619] thermal LNXTHERM:01: registered as thermal_zone0 [ 11.268628] ACPI: Thermal Zone [THRM] (22 C) [ 11.304822] ACPI: SSDT 00000000bfee7e00 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20041203) [ 11.320219] processor LNXCPU:03: registered as cooling_device4 [ 11.346954] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 11.359543] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 11.372184] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 11.385917] e1000e 0000:00:19.0: setting latency timer to 64 [ 11.386001] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 11.496322] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:92:6c:2e:10 [ 11.510523] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection [ 11.510553] 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: ffffff-0ff [ 11.559578] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 11.573804] usbcore: registered new interface driver libusual [ 11.584634] rtc_cmos 00:04: RTC can wake from S4 [ 11.584690] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 11.584738] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 11.652585] cfg80211: Calling CRDA to update world regulatory domain [ 11.767805] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 11.782154] Uniform CD-ROM driver Revision: 3.20 [ 11.794049] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 11.797613] usbcore: registered new interface driver hiddev [ 11.828991] Initializing USB Mass Storage driver... [ 11.840841] scsi6 : SCSI emulation for USB Mass Storage devices [ 11.843090] input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:1d.2/usb6/6-2/6-2:1.0/input/input3 [ 11.843157] generic-usb 0003:045E:008C.0001: input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:1d.2-2/input0 [ 11.843176] usbcore: registered new interface driver usbhid [ 11.843178] usbhid: v2.6:USB HID core driver [ 11.919134] usb-storage: device found at 2 [ 11.919136] usb-storage: waiting for device to settle before scanning [ 11.919157] usbcore: registered new interface driver usb-storage [ 11.920503] ohci1394 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.920516] ohci1394 0000:02:02.0: setting latency timer to 64 [ 11.947856] USB Mass Storage support registered. [ 11.978554] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 12.643836] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.658858] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.705190] phy0: Selected rate control algorithm 'minstrel' [ 12.705296] Registered led device: rt2800usb-phy0::radio [ 12.718364] Registered led device: rt2800usb-phy0::assoc [ 12.731490] Registered led device: rt2800usb-phy0::quality [ 12.744974] usbcore: registered new interface driver rt2800usb [ 13.280112] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000152c873] [ 13.306198] Adding 2104504k swap on /dev/sdb2. Priority:-1 extents:1 across:2104504k [ 13.996380] device-mapper: uevent: version 1.0.3 [ 14.009166] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@...hat.com [ 15.564712] loop: module loaded [ 15.601346] kjournald starting. Commit interval 5 seconds [ 15.614148] EXT3 FS on sdb1, internal journal [ 15.625311] EXT3-fs: mounted filesystem with writeback data mode. [ 16.224757] fuse init (API version 7.12) [ 16.926296] usb-storage: device scan complete [ 16.930401] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 5.14 PQ: 0 ANSI: 0 [ 16.947529] scsi 6:0:0:1: Direct-Access Generic Flash HS-MS/SD 5.14 PQ: 0 ANSI: 0 [ 16.964775] scsi 6:0:0:2: Direct-Access Generic Flash HS-SM 5.14 PQ: 0 ANSI: 0 [ 16.979417] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 16.991097] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 17.004347] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 17.015892] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 17.033884] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 17.081509] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 18.467620] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3 [ 18.478595] platform microcode: firmware: requesting intel-ucode/06-0f-0b [ 18.562553] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3 [ 18.573242] platform microcode: firmware: requesting intel-ucode/06-0f-0b [ 18.588288] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3 [ 18.599097] platform microcode: firmware: requesting intel-ucode/06-0f-0b [ 18.614667] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3 [ 18.625631] platform microcode: firmware: requesting intel-ucode/06-0f-0b [ 18.642004] Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba [ 18.824397] microcode: CPU0 updated to revision 0xb6, date = 2007-07-13 [ 18.840502] microcode: CPU1 updated to revision 0xb6, date = 2007-07-13 [ 18.862336] microcode: CPU2 updated to revision 0xb6, date = 2007-07-13 [ 18.881558] microcode: CPU3 updated to revision 0xb6, date = 2007-07-13 [ 19.335772] NET: Registered protocol family 10 [ 19.345391] lo: Disabled Privacy Extensions [ 19.354889] tunl0: Disabled Privacy Extensions [ 19.546466] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 20.067968] ip_tables: (C) 2000-2006 Netfilter Core Team [ 20.401533] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 20.412974] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 20.425681] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 20.439178] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.736219] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 22.788056] e1000e 0000:00:19.0: irq 26 for MSI/MSI-X [ 22.788623] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.396774] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 24.409760] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 24.421544] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.512635] RPC: Registered udp transport module. [ 30.523405] RPC: Registered tcp transport module. [ 30.761744] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de). [ 31.022097] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 31.036486] NFSD: starting 90-second grace period [ 32.835900] rt2800usb 7-5:1.0: firmware: requesting rt2870.bin [ 32.966290] input: rt2800usb as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.0/input/input4 [ 33.155122] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 34.557036] eth0: no IPv6 routers present [ 35.739263] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 35.741898] wlan0: authenticated [ 35.741903] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 35.750153] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 35.750156] wlan0: associated [ 35.758512] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 37.142949] mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary [ 39.744125] wlan0: deauthenticated (Reason: 1) [ 40.744022] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1 [ 40.748042] wlan0 direct probe responded [ 40.748046] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 41.752024] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1 [ 41.754462] wlan0 direct probe responded [ 41.754465] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 41.756334] wlan0: authenticated [ 41.756338] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 41.760960] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 41.760964] wlan0: associated [ 45.784006] wlan0: no IPv6 routers present [ 51.767874] wlan0: disassociating by local choice (reason=3) [ 51.770733] wlan0: deauthenticated (Reason: 6) [ 53.812070] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 53.813953] wlan0: authenticated [ 53.813955] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 53.819343] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 53.819346] wlan0: associated [ 57.814077] wlan0: deauthenticated (Reason: 1) [ 58.812508] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1 [ 58.816596] wlan0 direct probe responded [ 58.816599] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 59.816548] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1 [ 59.818987] wlan0 direct probe responded [ 59.818990] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 59.820979] wlan0: authenticated [ 59.820981] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 59.825606] wlan0: RX ReassocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 59.825608] wlan0: associated [ 497.373019] wlan0: deauthenticating by local choice (reason=3) [ 514.061145] SysRq : Changing Loglevel [ 514.065134] Loglevel set to 9 [ 531.236085] usbcore: deregistering interface driver rt2800usb [ 541.310842] phy1: Selected rate control algorithm 'minstrel' [ 541.320854] Registered led device: rt2800usb-phy1::radio [ 541.330044] Registered led device: rt2800usb-phy1::assoc [ 541.339353] Registered led device: rt2800usb-phy1::quality [ 541.353367] usbcore: registered new interface driver rt2800usb [ 541.442636] rt2800usb 7-5:1.0: firmware: requesting rt2870.bin [ 541.492492] input: rt2800usb as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.0/input/input5 [ 541.683185] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 544.251254] wlan0: direct probe to AP 00:1a:4f:9a:d0:12 try 1 [ 544.263266] wlan0 direct probe responded [ 544.271148] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 544.282631] wlan0: authenticated [ 544.289472] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 544.303006] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 544.314561] wlan0: associated [ 544.330059] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 546.883815] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0 [ 546.890383] ll header: ff:ff:ff:ff:ff:ff:00:1a:4f:7b:e8:48:08:00 [ 546.980440] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0 [ 546.992455] ll header: ff:ff:ff:ff:ff:ff:00:1a:4f:7b:e8:48:08:00 [ 554.672005] wlan0: no IPv6 routers present [ 1273.685021] device wlan0 entered promiscuous mode [ 1444.008014] device wlan0 left promiscuous mode [ 1454.721520] wlan0: deauthenticating by local choice (reason=3) [ 1466.830862] usbcore: deregistering interface driver rt2800usb [ 1529.625525] phy2: Selected rate control algorithm 'minstrel' [ 1529.638474] Registered led device: rt2800usb-phy2::radio [ 1529.650467] Registered led device: rt2800usb-phy2::assoc [ 1529.662011] Registered led device: rt2800usb-phy2::quality [ 1529.675227] usbcore: registered new interface driver rt2800usb [ 1529.736962] rt2800usb 7-5:1.0: firmware: requesting rt2870.bin [ 1529.812574] input: rt2800usb as /devices/pci0000:00/0000:00:1a.7/usb7/7-5/7-5:1.0/input/input6 [ 1530.011246] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1532.575208] wlan0: authenticate with AP 00:1a:4f:9a:d0:12 [ 1532.589467] wlan0: authenticated [ 1532.599358] wlan0: associate with AP 00:1a:4f:9a:d0:12 [ 1532.616210] wlan0: RX AssocResp from 00:1a:4f:9a:d0:12 (capab=0x411 status=0 aid=1) [ 1532.629818] wlan0: associated [ 1532.647010] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1534.905025] device wlan0 entered promiscuous mode [ 1535.202677] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0 [ 1535.206611] ll header: ff:ff:ff:ff:ff:ff:00:1a:4f:7b:e8:48:08:00 [ 1535.298916] martian source 255.255.255.255 from 192.168.178.1, on dev wlan0 [ 1535.306059] ll header: ff:ff:ff:ff:ff:ff:00:1a:4f:7b:e8:48:08:00 [ 1536.512420] ------------[ cut here ]------------ [ 1536.516065] kernel BUG at mm/slub.c:2929! [ 1536.516065] invalid opcode: 0000 [#1] SMP [ 1536.516065] last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map [ 1536.516065] CPU 0 [ 1536.516065] Modules linked in: rt2800usb xt_tcpudp xt_pkttype xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables cpufreq_conservative ip6table_filter cpufreq_ondemand ip6_tables cpufreq_userspace x_tables cpufreq_powersave acpi_cpufreq ipv6 microcode fuse loop dm_mod snd_hda_codec_realtek arc4 ecb snd_hda_intel snd_hda_codec rt2x00usb rt2x00lib firewire_ohci snd_hwdep snd_pcm led_class firewire_core snd_timer input_polldev crc_itu_t mac80211 snd ohci1394 usb_storage usbhid soundcore sr_mod rtc_cmos usb_libusual i2c_i801 cfg80211 snd_page_alloc rtc_core hid e1000e thermal processor ieee1394 i2c_core cdrom crc_ccitt intel_agp rtc_lib button sg uhci_hcd ehci_hcd sd_mod usbcore edd fan ext3 mbcache jbd ahci libata scsi_mod [last unloaded: rt2800usb] [ 1536.516065] Pid: 6982, comm: gam_server Not tainted 2.6.31-smp #1001 MS-7502 [ 1536.516065] RIP: 0010:[<ffffffff810b7306>] [<ffffffff810b7306>] kfree+0x82/0x187 [ 1536.516065] RSP: 0018:ffff8800ad1b5df8 EFLAGS: 00010246 [ 1536.516065] RAX: 4000000000000000 RBX: ffff88009d7113a8 RCX: 0000000000000000 [ 1536.516065] RDX: ffffea0000000000 RSI: ffffffff814b39f2 RDI: ffff88001818500b [ 1536.516065] RBP: ffff8800ad1b5e28 R08: 0000000000000000 R09: ffff8800ad1b5e48 [ 1536.516065] R10: ffff8800ad1b5e48 R11: 0000000000000246 R12: ffffea0000545518 [ 1536.516065] R13: 0000000000000010 R14: ffff88001818500b R15: 0000000001eeb460 [ 1536.516065] FS: 00007f08d83726f0(0000) GS:ffff8800014e1000(0000) knlGS:0000000000000000 [ 1536.516065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1536.516065] CR2: 00007f05b5c4e048 CR3: 00000000ad1a8000 CR4: 00000000000006f0 [ 1536.516065] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1536.516065] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1536.516065] Process gam_server (pid: 6982, threadinfo ffff8800ad1b4000, task ffff8800be290cc0) [ 1536.516065] Stack: [ 1536.516065] ffff8800ad1b5e38 ffff88009d7113a8 ffff88009d7113a8 0000000000000010 [ 1536.516065] <0> 0000000000000002 0000000001eeb460 ffff8800ad1b5e48 ffffffff810e3b4c [ 1536.516065] <0> ffff8800ad1b5e48 0000000000000020 ffff8800ad1b5f08 ffffffff810e5e3b [ 1536.516065] Call Trace: [ 1536.516065] [<ffffffff810e3b4c>] fsnotify_put_event+0x45/0x58 [ 1536.891064] [<ffffffff810e5e3b>] inotify_read+0x1f0/0x282 [ 1536.891064] [<ffffffff81050bba>] ? autoremove_wake_function+0x0/0x38 [ 1536.891064] [<ffffffff810bc2ac>] vfs_read+0xab/0x167 [ 1536.891064] [<ffffffff810bc42c>] sys_read+0x47/0x6f [ 1536.891064] [<ffffffff8100ba6b>] system_call_fastpath+0x16/0x1b [ 1536.891064] Code: 00 ea ff ff 48 c1 e8 0c 48 6b c0 38 4c 8d 24 10 66 41 83 3c 24 00 79 05 4d 8b 64 24 10 49 8b 04 24 84 c0 78 17 66 a9 00 c0 75 04 <0f> 0b eb fe 4c 89 e7 e8 98 44 fe ff e9 e8 00 00 00 4d 8b 6c 24 [ 1536.891064] RIP [<ffffffff810b7306>] kfree+0x82/0x187 [ 1536.891064] RSP <ffff8800ad1b5df8> [ 1537.069331] ---[ end trace 432a664becb6485b ]--- [ 1543.056005] wlan0: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists