| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20090813072905.56FB4526EC9@mailhub.coreip.homeip.net>
Date: Wed, 12 Aug 2009 23:58:22 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: david@...deman.nu
Cc: linux-kernel@...r.kernel.org, linux-input@...r.kernel.org,
jbarnes@...tuousgeek.org, akpm@...ux-foundation.org,
bjorn.helgaas@...com, randy.dunlap@...cle.com
Subject: Re: [patch 2/2] Add a driver for the Winbond WPCD376I Consumer IR
hardware
Hi David,
On Sun, Aug 09, 2009 at 11:56:47AM +0200, david@...deman.nu wrote:
>
> +config INPUT_WINBOND_CIR
> + tristate "Winbond IR remote control"
> + depends on X86 && ACPI
> + select LEDS_CLASS
> + select BITREVERSE
> + help
> + Say Y here if you want to use the IR remote functionality found
> + in some Winbond SuperI/O chips. Currently only the WPCD376I
> + chip is supported (included in some Intel Media series motherboards).
> +
> + IR Receive and wake-on-IR from suspend and power-off is currently
> + supported.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called winbond_cir.
> +
> config HP_SDC_RTC
> tristate "HP SDC Real Time Clock"
> depends on (GSC || HP300) && SERIO
> Index: linux-2.6/drivers/input/misc/Makefile
> ===================================================================
> --- linux-2.6.orig/drivers/input/misc/Makefile 2009-07-25 21:18:57.000000000 +0200
> +++ linux-2.6/drivers/input/misc/Makefile 2009-07-25 21:19:28.000000000 +0200
> @@ -19,6 +19,7 @@
> obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
> obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
> obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
> +obj-$(CONFIG_INPUT_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
> obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
> obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
Please keep Makefile sorted alphabetically.
> Index: linux-2.6/drivers/input/misc/winbond-cir.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6/drivers/input/misc/winbond-cir.c 2009-07-25 21:19:28.000000000 +0200
> @@ -0,0 +1,1644 @@
> +/*
> + * winbond-cir.c - Driver for the Consumer IR functionality of Winbond
> + * SuperI/O chips.
> + *
> + * Currently supports the Winbond WPCD376i chip (PNP id WEC1022), but
> + * could probably support others (Winbond WEC102X, NatSemi, etc)
> + * with minor modifications.
> + *
> + * Original Author: David Härdeman <david@...deman.nu>
> + * Copyright (C) 2009 David Härdeman <david@...deman.nu>
> + *
> + * Dedicated to Matilda, my newborn daughter, without whose loving attention
> + * this driver would have been finished in half the time and with a fraction
> + * of the bugs.
> + *
> + * Written using:
> + * o Winbond WPCD376I datasheet helpfully provided by Jesse Barnes at Intel
> + * o NatSemi PC87338/PC97338 datasheet (for the serial port stuff)
> + * o DSDT dumps
> + *
> + * Supported features:
> + * o RC6
> + * o Wake-On-CIR functionality
> + *
> + * To do:
> + * o Test NEC and RC5
> + *
> + * Left as an exercise for the reader:
> + * o Learning (I have neither the hardware, nor the need)
> + * o IR Transmit (ibid)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/pnp.h>
> +#include <linux/interrupt.h>
> +#include <linux/timer.h>
> +#include <linux/input.h>
> +#include <linux/leds.h>
> +#include <linux/list.h>
> +#include <linux/spinlock.h>
> +#include <linux/pci_ids.h>
> +#include <linux/io.h>
> +#include <linux/bitrev.h>
> +#include <linux/bitops.h>
> +
> +#define DRVNAME "winbond-cir"
> +
> +/* CEIR Wake-Up Registers, relative to data->wbase */
> +#define WBCIR_REG_WCEIR_CTL 0x03 /* CEIR Receiver Control */
> +#define WBCIR_REG_WCEIR_STS 0x04 /* CEIR Receiver Status */
> +#define WBCIR_REG_WCEIR_EV_EN 0x05 /* CEIR Receiver Event Enable */
> +#define WBCIR_REG_WCEIR_CNTL 0x06 /* CEIR Receiver Counter Low */
> +#define WBCIR_REG_WCEIR_CNTH 0x07 /* CEIR Receiver Counter High */
> +#define WBCIR_REG_WCEIR_INDEX 0x08 /* CEIR Receiver Index */
> +#define WBCIR_REG_WCEIR_DATA 0x09 /* CEIR Receiver Data */
> +#define WBCIR_REG_WCEIR_CSL 0x0A /* CEIR Re. Compare Strlen */
> +#define WBCIR_REG_WCEIR_CFG1 0x0B /* CEIR Re. Configuration 1 */
> +#define WBCIR_REG_WCEIR_CFG2 0x0C /* CEIR Re. Configuration 2 */
> +
> +/* CEIR Enhanced Functionality Registers, relative to data->ebase */
> +#define WBCIR_REG_ECEIR_CTS 0x00 /* Enhanced IR Control Status */
> +#define WBCIR_REG_ECEIR_CCTL 0x01 /* Infrared Counter Control */
> +#define WBCIR_REG_ECEIR_CNT_LO 0x02 /* Infrared Counter LSB */
> +#define WBCIR_REG_ECEIR_CNT_HI 0x03 /* Infrared Counter MSB */
> +#define WBCIR_REG_ECEIR_IREM 0x04 /* Infrared Emitter Status */
> +
> +/* SP3 Banked Registers, relative to data->sbase */
> +#define WBCIR_REG_SP3_BSR 0x03 /* Bank Select, all banks */
> + /* Bank 0 */
> +#define WBCIR_REG_SP3_RXDATA 0x00 /* FIFO RX data (r) */
> +#define WBCIR_REG_SP3_TXDATA 0x00 /* FIFO TX data (w) */
> +#define WBCIR_REG_SP3_IER 0x01 /* Interrupt Enable */
> +#define WBCIR_REG_SP3_EIR 0x02 /* Event Identification (r) */
> +#define WBCIR_REG_SP3_FCR 0x02 /* FIFO Control (w) */
> +#define WBCIR_REG_SP3_MCR 0x04 /* Mode Control */
> +#define WBCIR_REG_SP3_LSR 0x05 /* Link Status */
> +#define WBCIR_REG_SP3_MSR 0x06 /* Modem Status */
> +#define WBCIR_REG_SP3_ASCR 0x07 /* Aux Status and Control */
> + /* Bank 2 */
> +#define WBCIR_REG_SP3_BGDL 0x00 /* Baud Divisor LSB */
> +#define WBCIR_REG_SP3_BGDH 0x01 /* Baud Divisor MSB */
> +#define WBCIR_REG_SP3_EXCR1 0x02 /* Extended Control 1 */
> +#define WBCIR_REG_SP3_EXCR2 0x04 /* Extended Control 2 */
> +#define WBCIR_REG_SP3_TXFLV 0x06 /* TX FIFO Level */
> +#define WBCIR_REG_SP3_RXFLV 0x07 /* RX FIFO Level */
> + /* Bank 3 */
> +#define WBCIR_REG_SP3_MRID 0x00 /* Module Identification */
> +#define WBCIR_REG_SP3_SH_LCR 0x01 /* LCR Shadow */
> +#define WBCIR_REG_SP3_SH_FCR 0x02 /* FCR Shadow */
> + /* Bank 4 */
> +#define WBCIR_REG_SP3_IRCR1 0x02 /* Infrared Control 1 */
> + /* Bank 5 */
> +#define WBCIR_REG_SP3_IRCR2 0x04 /* Infrared Control 2 */
> + /* Bank 6 */
> +#define WBCIR_REG_SP3_IRCR3 0x00 /* Infrared Control 3 */
> +#define WBCIR_REG_SP3_SIR_PW 0x02 /* SIR Pulse Width */
> + /* Bank 7 */
> +#define WBCIR_REG_SP3_IRRXDC 0x00 /* IR RX Demod Control */
> +#define WBCIR_REG_SP3_IRTXMC 0x01 /* IR TX Mod Control */
> +#define WBCIR_REG_SP3_RCCFG 0x02 /* CEIR Config */
> +#define WBCIR_REG_SP3_IRCFG1 0x04 /* Infrared Config 1 */
> +#define WBCIR_REG_SP3_IRCFG4 0x07 /* Infrared Config 4 */
> +
> +/*
> + * Magic values follow
> + */
> +
> +/* No interrupts for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
> +#define WBCIR_IRQ_NONE 0x00
> +/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
> +#define WBCIR_IRQ_RX 0x01
> +/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
> +#define WBCIR_IRQ_ERR 0x04
> +/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
> +#define WBCIR_LED_ENABLE 0x80
> +/* RX data available bit for WBCIR_REG_SP3_LSR */
> +#define WBCIR_RX_AVAIL 0x01
> +/* RX disable bit for WBCIR_REG_SP3_ASCR */
> +#define WBCIR_RX_DISABLE 0x20
> +/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
> +#define WBCIR_EXT_ENABLE 0x01
> +/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
> +#define WBCIR_REGSEL_COMPARE 0x10
> +/* Select mask register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
> +#define WBCIR_REGSEL_MASK 0x20
> +/* Starting address of selected register in WBCIR_REG_WCEIR_INDEX */
> +#define WBCIR_REG_ADDR0 0x00
> +
> +/* Valid banks for the SP3 UART */
> +enum wbcir_bank {
> + WBCIR_BANK_0 = 0x00,
> + WBCIR_BANK_1 = 0x80,
> + WBCIR_BANK_2 = 0xE0,
> + WBCIR_BANK_3 = 0xE4,
> + WBCIR_BANK_4 = 0xE8,
> + WBCIR_BANK_5 = 0xEC,
> + WBCIR_BANK_6 = 0xF0,
> + WBCIR_BANK_7 = 0xF4,
> +};
> +
> +/* Supported IR Protocols */
> +enum wbcir_protocol {
> + IR_PROTOCOL_RC5 = 0x0,
> + IR_PROTOCOL_NEC = 0x1,
> + IR_PROTOCOL_RC6 = 0x2,
> +};
> +
> +/* Misc */
> +#define WBCIR_ACPI_NAME "Winbond CIR"
> +#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */
> +#define WBCIR_ID_CHIP 0x04 /* Chip ID for the WPCD376I */
> +#define IR_KEYPRESS_TIMEOUT 250 /* FIXME: should be per-protocol? */
> +#define INVALID_SCANCODE 0x7FFFFFFF /* Invalid with all protos */
> +#define WAKEUP_IOMEM_LEN 0x10 /* Wake-Up I/O Reg Len */
> +#define EHFUNC_IOMEM_LEN 0x10 /* Enhanced Func I/O Reg Len */
> +#define SP_IOMEM_LEN 0x08 /* Serial Port 3 (IR) Reg Len */
> +#define WBCIR_MAX_IDLE_BYTES 10
> +
> +static DEFINE_SPINLOCK(wbcir_lock);
> +static DEFINE_RWLOCK(keytable_lock);
> +
> +struct wbcir_key {
> + u32 scancode;
> + unsigned int keycode;
> +};
> +
> +struct wbcir_keyentry {
> + struct wbcir_key key;
> + struct list_head list;
> +};
> +
> +static struct wbcir_key rc6_def_keymap[] = {
> + { 0x800F0400, KEY_0 },
> + { 0x800F0401, KEY_1 },
> + { 0x800F0402, KEY_2 },
> + { 0x800F0403, KEY_3 },
> + { 0x800F0404, KEY_4 },
> + { 0x800F0405, KEY_5 },
> + { 0x800F0406, KEY_6 },
> + { 0x800F0407, KEY_7 },
> + { 0x800F0408, KEY_8 },
> + { 0x800F0409, KEY_9 },
Make these ones KEY_NUMERIC_* as well, this should help users whose
keymaps have numbers in upper register normally.
> + { 0x800F041D, KEY_NUMERIC_STAR },
> + { 0x800F041C, KEY_NUMERIC_POUND },
> + { 0x800F0410, KEY_VOLUMEUP },
> + { 0x800F0411, KEY_VOLUMEDOWN },
> + { 0x800F0412, KEY_CHANNELUP },
> + { 0x800F0413, KEY_CHANNELDOWN },
> + { 0x800F040E, KEY_MUTE },
> + { 0x800F040D, KEY_VENDOR }, /* Vista Logo Key */
> + { 0x800F041E, KEY_UP },
> + { 0x800F041F, KEY_DOWN },
> + { 0x800F0420, KEY_LEFT },
> + { 0x800F0421, KEY_RIGHT },
> + { 0x800F0422, KEY_OK },
> + { 0x800F0423, KEY_ESC },
> + { 0x800F040F, KEY_INFO },
> + { 0x800F040A, KEY_CLEAR },
> + { 0x800F040B, KEY_ENTER },
> + { 0x800F045B, KEY_RED },
> + { 0x800F045C, KEY_GREEN },
> + { 0x800F045D, KEY_YELLOW },
> + { 0x800F045E, KEY_BLUE },
> + { 0x800F045A, KEY_TEXT },
> + { 0x800F0427, KEY_SWITCHVIDEOMODE },
> + { 0x800F040C, KEY_POWER },
> + { 0x800F0450, KEY_RADIO },
> + { 0x800F0448, KEY_PVR },
> + { 0x800F0447, KEY_AUDIO },
> + { 0x800F0426, KEY_EPG },
> + { 0x800F0449, KEY_CAMERA },
> + { 0x800F0425, KEY_TV },
> + { 0x800F044A, KEY_VIDEO },
> + { 0x800F0424, KEY_DVD },
> + { 0x800F0416, KEY_PLAY },
> + { 0x800F0418, KEY_PAUSE },
> + { 0x800F0419, KEY_STOP },
> + { 0x800F0414, KEY_FASTFORWARD },
> + { 0x800F041A, KEY_NEXT },
> + { 0x800F041B, KEY_PREVIOUS },
> + { 0x800F0415, KEY_REWIND },
> + { 0x800F0417, KEY_RECORD },
Umm, it looks like if you do (code & 0x800F0400) you can switch to
standard array-based keymap and won't even need list manipulation.
> +};
> +
> +/* Registers and other state is protected by wbcir_lock */
> +struct wbcir_data {
> + unsigned long wbase; /* Wake-Up Baseaddr */
> + unsigned long ebase; /* Enhanced Func. Baseaddr */
> + unsigned long sbase; /* Serial Port Baseaddr */
> + unsigned int irq; /* Serial Port IRQ */
> +
> + struct input_dev *input_dev;
> + struct timer_list timer_keyup;
> + struct led_trigger *rxtrigger;
> + struct led_trigger *txtrigger;
> + struct led_classdev led;
> +
> + u32 last_scancode;
> + unsigned int last_keycode;
> + u8 last_toggle;
> + u8 keypressed;
> + unsigned long keyup_jiffies;
> + unsigned int idle_count;
> +
> + /* RX irdata and parsing state */
> + unsigned long irdata[30];
> + unsigned int irdata_count;
> + unsigned int irdata_idle;
> + unsigned int irdata_off;
> + unsigned int irdata_error;
> +
> + /* Protected by keytable_lock */
> + struct list_head keytable;
I think this has a potential to deadlock... Set and get keycodes are
called with event lock taken, and then your implementations acquire
keytable lock. When you emit input events the opposite happens - you
take the keytable lock and then input core takes event lock.
> +};
> +
> +static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
> +module_param(protocol, uint, 0444);
> +MODULE_PARM_DESC(protocol, "IR protocol to use "
> + "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
> +
> +static int invert; /* default = 0 */
> +module_param(invert, bool, 0444);
> +MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
> +
> +static unsigned int wake_sc = 0x800F040C;
> +module_param(wake_sc, uint, 0644);
> +MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
> +
> +static unsigned int wake_rc6mode = 6;
> +module_param(wake_rc6mode, uint, 0644);
> +MODULE_PARM_DESC(wake_rc6mode, "RC6 mode for the power-on command "
> + "(0 = 0, 6 = 6A, default)");
> +
> +
> +
> +/*****************************************************************************
> + *
> + * UTILITY FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +/* Caller needs to hold wbcir_lock */
> +static void
> +wbcir_set_bits(unsigned long addr, u8 bits, u8 mask)
> +{
> + u8 val;
> +
> + val = inb(addr);
> + val = ((val & ~mask) | (bits & mask));
> + outb(val, addr);
> +}
> +
> +/* Selects the register bank for the serial port */
> +static inline void
> +wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
> +{
> + outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
> +}
> +
> +static enum led_brightness
> +wbcir_led_brightness_get(struct led_classdev *led_cdev)
> +{
> + struct wbcir_data *data = container_of(led_cdev,
> + struct wbcir_data,
> + led);
> +
> + if (inb(data->ebase + WBCIR_REG_ECEIR_CTS) & WBCIR_LED_ENABLE)
> + return LED_FULL;
> + else
> + return LED_OFF;
> +}
> +
> +static void
> +wbcir_led_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct wbcir_data *data = container_of(led_cdev,
> + struct wbcir_data,
> + led);
> +
> + wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS,
> + brightness == LED_OFF ? 0x00 : WBCIR_LED_ENABLE,
> + WBCIR_LED_ENABLE);
> +}
> +
> +/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
> +static u8
> +wbcir_to_rc6cells(u8 val)
> +{
> + u8 coded = 0x00;
> + int i;
> +
> + val &= 0x0F;
> + for (i = 0; i < 4; i++) {
> + if (val & 0x01)
> + coded |= 0x02 << (i * 2);
> + else
> + coded |= 0x01 << (i * 2);
> + val >>= 1;
> + }
> +
> + return coded;
> +}
> +
> +
> +
> +/*****************************************************************************
> + *
> + * INPUT FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +static unsigned int
> +wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
> +{
> + struct wbcir_keyentry *keyentry;
> + unsigned int keycode = KEY_RESERVED;
> + unsigned long flags;
> +
> + read_lock_irqsave(&keytable_lock, flags);
> +
> + list_for_each_entry(keyentry, &data->keytable, list) {
> + if (keyentry->key.scancode == scancode) {
> + keycode = keyentry->key.keycode;
> + break;
> + }
> + }
> +
> + read_unlock_irqrestore(&keytable_lock, flags);
> + return keycode;
> +}
> +
> +static int
> +wbcir_getkeycode(struct input_dev *dev, int scancode, int *keycode)
> +{
> + struct wbcir_data *data = input_get_drvdata(dev);
> +
> + *keycode = (int)wbcir_do_getkeycode(data, (u32)scancode);
> + return 0;
> +}
> +
> +static int
> +wbcir_setkeycode(struct input_dev *dev, int sscancode, int keycode)
> +{
> + struct wbcir_data *data = input_get_drvdata(dev);
> + struct wbcir_keyentry *keyentry;
> + struct wbcir_keyentry *new_keyentry;
> + unsigned long flags;
> + unsigned int old_keycode = KEY_RESERVED;
> + u32 scancode = (u32)sscancode;
> +
> + if (keycode < 0 || keycode > KEY_MAX)
> + return -EINVAL;
> +
> + new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
> + if (!new_keyentry)
> + return -ENOMEM;
> +
> + write_lock_irqsave(&keytable_lock, flags);
> +
> + list_for_each_entry(keyentry, &data->keytable, list) {
> + if (keyentry->key.scancode != scancode)
> + continue;
> +
> + old_keycode = keyentry->key.keycode;
> + keyentry->key.keycode = keycode;
> +
> + if (keyentry->key.keycode == KEY_RESERVED) {
> + list_del(&keyentry->list);
> + kfree(keyentry);
> + }
> +
> + break;
> + }
> +
> + set_bit(keycode, dev->keybit);
> +
> + if (old_keycode == KEY_RESERVED) {
> + new_keyentry->key.scancode = scancode;
> + new_keyentry->key.keycode = keycode;
> + list_add(&new_keyentry->list, &data->keytable);
> + } else {
> + kfree(new_keyentry);
> + clear_bit(old_keycode, dev->keybit);
> + list_for_each_entry(keyentry, &data->keytable, list) {
> + if (keyentry->key.keycode == old_keycode) {
> + set_bit(old_keycode, dev->keybit);
> + break;
> + }
> + }
> + }
> +
> + write_unlock_irqrestore(&keytable_lock, flags);
> + return 0;
> +}
> +
> +/*
> + * Timer function to report keyup event some time after keydown is
> + * reported by the ISR.
> + */
> +static void
> +wbcir_keyup(unsigned long cookie)
> +{
> + struct wbcir_data *data = (struct wbcir_data *)cookie;
> + unsigned long flags;
> +
> + /*
> + * data->keyup_jiffies is used to prevent a race condition if a
> + * hardware interrupt occurs at this point and the keyup timer
> + * event is moved further into the future as a result.
> + *
> + * The timer will then be reactivated and this function called
> + * again in the future. We need to exit gracefully in that case
> + * to allow the input subsystem to do its auto-repeat magic or
> + * a keyup event might follow immediately after the keydown.
> + */
> +
> + spin_lock_irqsave(&wbcir_lock, flags);
> +
> + if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
> + data->keypressed = 0;
> + led_trigger_event(data->rxtrigger, LED_OFF);
> + input_report_key(data->input_dev, data->last_keycode, 0);
> + input_sync(data->input_dev);
> + }
> +
> + spin_unlock_irqrestore(&wbcir_lock, flags);
> +}
> +
> +static void
> +wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
> +{
> + unsigned int keycode;
> +
> + /* Repeat? */
> + if (data->last_scancode == scancode &&
> + data->last_toggle == toggle &&
> + data->keypressed)
> + goto set_timer;
> + data->last_scancode = scancode;
> +
> + /* Do we need to release an old keypress? */
> + if (data->keypressed) {
> + input_report_key(data->input_dev, data->last_keycode, 0);
> + input_sync(data->input_dev);
> + data->keypressed = 0;
> + }
> +
> + /* Do we know this scancode? */
> + keycode = wbcir_do_getkeycode(data, scancode);
> + if (keycode == KEY_RESERVED)
> + goto set_timer;
> +
> + /* Register a keypress */
> + input_report_key(data->input_dev, keycode, 1);
> + input_sync(data->input_dev);
> + data->keypressed = 1;
> + data->last_keycode = keycode;
> + data->last_toggle = toggle;
> +
> +set_timer:
> + led_trigger_event(data->rxtrigger,
> + data->keypressed ? LED_FULL : LED_OFF);
> + data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
> + mod_timer(&data->timer_keyup, data->keyup_jiffies);
> +}
> +
> +
> +
> +/*****************************************************************************
> + *
> + * IR PARSING FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +/* Resets all irdata */
> +static void
> +wbcir_reset_irdata(struct wbcir_data *data)
> +{
> + memset(data->irdata, 0, sizeof(data->irdata));
> + data->irdata_count = 0;
> + data->irdata_off = 0;
> + data->irdata_error = 0;
> +}
> +
> +/* Adds one bit of irdata */
> +static void
> +add_irdata_bit(struct wbcir_data *data, int set)
> +{
> + if (data->irdata_count >= sizeof(data->irdata) * 8) {
> + data->irdata_error = 1;
> + return;
> + }
> +
> + if (set)
> + __set_bit(data->irdata_count, data->irdata);
> + data->irdata_count++;
> +}
> +
> +/* Gets count bits of irdata */
> +static u16
> +get_bits(struct wbcir_data *data, int count)
> +{
> + u16 val = 0x0;
> +
> + if (data->irdata_count - data->irdata_off < count) {
> + data->irdata_error = 1;
> + return 0x0;
> + }
> +
> + while (count > 0) {
> + val <<= 1;
> + if (test_bit(data->irdata_off, data->irdata))
> + val |= 0x1;
> + count--;
> + data->irdata_off++;
> + }
> +
> + return val;
> +}
> +
> +/* Reads 16 cells and converts them to a byte */
> +static u8
> +wbcir_rc6cells_to_byte(struct wbcir_data *data)
> +{
> + u16 raw = get_bits(data, 16);
> + u8 val = 0x00;
> + int bit;
> +
> + for (bit = 0; bit < 8; bit++) {
> + switch (raw & 0x03) {
> + case 0x01:
> + break;
> + case 0x02:
> + val |= (0x01 << bit);
> + break;
> + default:
> + data->irdata_error = 1;
> + break;
> + }
> + raw >>= 2;
> + }
> +
> + return val;
> +}
> +
> +/* Decodes a number of bits from raw RC5 data */
> +static u8
> +wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
> +{
> + u16 raw = get_bits(data, count * 2);
> + u8 val = 0x00;
> + int bit;
> +
> + for (bit = 0; bit < count; bit++) {
> + switch (raw & 0x03) {
> + case 0x01:
> + val |= (0x01 << bit);
> + break;
> + case 0x02:
> + break;
> + default:
> + data->irdata_error = 1;
> + break;
> + }
> + raw >>= 2;
> + }
> +
> + return val;
> +}
> +
> +static void
> +wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
> +{
> + /*
> + * Normal bits are manchester coded as follows:
> + * cell0 + cell1 = logic "0"
> + * cell1 + cell0 = logic "1"
> + *
> + * The IR pulse has the following components:
> + *
> + * Leader - 6 * cell1 - discarded
> + * Gap - 2 * cell0 - discarded
> + * Start bit - Normal Coding - always "1"
> + * Mode Bit 2 - 0 - Normal Coding
> + * Toggle bit - Normal Coding with double bit time,
> + * e.g. cell0 + cell0 + cell1 + cell1
> + * means logic "0".
> + *
> + * The rest depends on the mode, the following modes are known:
> + *
> + * MODE 0:
> + * Address Bit 7 - 0 - Normal Coding
> + * Command Bit 7 - 0 - Normal Coding
> + *
> + * MODE 6:
> + * The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
> + * Submode B is for pointing devices, only remotes using submode A
> + * are supported.
> + *
> + * Customer range bit - 0 => Customer = 7 bits, 0...127
> + * 1 => Customer = 15 bits, 32768...65535
> + * Customer Bits - Normal Coding
> + *
> + * Customer codes are allocated by Philips. The rest of the bits
> + * are customer dependent. The following is commonly used (and the
> + * only supported config):
> + *
> + * Toggle Bit - Normal Coding
> + * Address Bit 6 - 0 - Normal Coding
> + * Command Bit 7 - 0 - Normal Coding
> + *
> + * All modes are followed by at least 6 * cell0.
> + *
> + * MODE 0 msglen:
> + * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
> + * 8 * 2 (address) + 8 * 2 (command) =
> + * 44 cells
> + *
> + * MODE 6A msglen:
> + * 1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
> + * 1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
> + * 1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
> + * 60 - 76 cells
> + */
> + u8 mode;
> + u8 toggle;
> + u16 customer = 0x0;
> + u8 address;
> + u8 command;
> + u32 scancode;
> +
> + /* Leader mark */
> + while (get_bits(data, 1) && !data->irdata_error)
> + /* Do nothing */;
> +
> + /* Leader space */
> + if (get_bits(data, 1)) {
> + dev_dbg(dev, "RC6 - Invalid leader space\n");
> + return;
> + }
> +
> + /* Start bit */
> + if (get_bits(data, 2) != 0x02) {
> + dev_dbg(dev, "RC6 - Invalid start bit\n");
> + return;
> + }
> +
> + /* Mode */
> + mode = get_bits(data, 6);
> + switch (mode) {
> + case 0x15: /* 010101 = b000 */
> + mode = 0;
> + break;
> + case 0x29: /* 101001 = b110 */
> + mode = 6;
> + break;
> + default:
> + dev_dbg(dev, "RC6 - Invalid mode\n");
> + return;
> + }
> +
> + /* Toggle bit / Submode bit */
> + toggle = get_bits(data, 4);
> + switch (toggle) {
> + case 0x03:
> + toggle = 0;
> + break;
> + case 0x0C:
> + toggle = 1;
> + break;
> + default:
> + dev_dbg(dev, "RC6 - Toggle bit error\n");
> + break;
> + }
> +
> + /* Customer */
> + if (mode == 6) {
> + if (toggle != 0) {
> + dev_dbg(dev, "RC6B - Not Supported\n");
> + return;
> + }
> +
> + customer = wbcir_rc6cells_to_byte(data);
> +
> + if (customer & 0x80) {
> + /* 15 bit customer value */
> + customer <<= 8;
> + customer |= wbcir_rc6cells_to_byte(data);
> + }
> + }
> +
> + /* Address */
> + address = wbcir_rc6cells_to_byte(data);
> + if (mode == 6) {
> + toggle = address >> 7;
> + address &= 0x7F;
> + }
> +
> + /* Command */
> + command = wbcir_rc6cells_to_byte(data);
> +
> + /* Create scancode */
> + scancode = command;
> + scancode |= address << 8;
> + scancode |= customer << 16;
> +
> + /* Last sanity check */
> + if (data->irdata_error) {
> + dev_dbg(dev, "RC6 - Cell error(s)\n");
> + return;
> + }
> +
> + dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
> + "toggle %u mode %u scan 0x%08X\n",
> + address,
> + command,
> + customer,
> + (unsigned int)toggle,
> + (unsigned int)mode,
> + scancode);
> +
> + wbcir_keydown(data, scancode, toggle);
> +}
> +
> +static void
> +wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
> +{
> + /*
> + * Bits are manchester coded as follows:
> + * cell1 + cell0 = logic "0"
> + * cell0 + cell1 = logic "1"
> + * (i.e. the reverse of RC6)
> + *
> + * Start bit 1 - "1" - discarded
> + * Start bit 2 - Must be inverted to get command bit 6
> + * Toggle bit
> + * Address Bit 4 - 0
> + * Command Bit 5 - 0
> + */
> + u8 toggle;
> + u8 address;
> + u8 command;
> + u32 scancode;
> +
> + /* Start bit 1 */
> + if (!get_bits(data, 1)) {
> + dev_dbg(dev, "RC5 - Invalid start bit\n");
> + return;
> + }
> +
> + /* Start bit 2 */
> + if (!wbcir_get_rc5bits(data, 1))
> + command = 0x40;
> + else
> + command = 0x00;
> +
> + toggle = wbcir_get_rc5bits(data, 1);
> + address = wbcir_get_rc5bits(data, 5);
> + command |= wbcir_get_rc5bits(data, 6);
> + scancode = address << 7 | command;
> +
> + /* Last sanity check */
> + if (data->irdata_error) {
> + dev_dbg(dev, "RC5 - Invalid message\n");
> + return;
> + }
> +
> + dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
> + (unsigned int)address,
> + (unsigned int)command,
> + (unsigned int)toggle,
> + (unsigned int)scancode);
> +
> + wbcir_keydown(data, scancode, toggle);
> +}
> +
> +static void
> +wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
> +{
> + /*
> + * Each bit represents 560 us.
> + *
> + * Leader - 9 ms burst
> + * Gap - 4.5 ms silence
> + * Address1 bit 0 - 7 - Address 1
> + * Address2 bit 0 - 7 - Address 2
> + * Command1 bit 0 - 7 - Command 1
> + * Command2 bit 0 - 7 - Command 2
> + *
> + * Note the bit order!
> + *
> + * With the old NEC protocol, Address2 was the inverse of Address1
> + * and Command2 was the inverse of Command1 and were used as
> + * an error check.
> + *
> + * With NEC extended, Address1 is the LSB of the Address and
> + * Address2 is the MSB, Command parsing remains unchanged.
> + *
> + * A repeat message is coded as:
> + * Leader - 9 ms burst
> + * Gap - 2.25 ms silence
> + * Repeat - 560 us active
> + */
> + u8 address1;
> + u8 address2;
> + u8 command1;
> + u8 command2;
> + u16 address;
> + u32 scancode;
> +
> + /* Leader mark */
> + while (get_bits(data, 1) && !data->irdata_error)
> + /* Do nothing */;
> +
> + /* Leader space */
> + if (get_bits(data, 4)) {
> + dev_dbg(dev, "NEC - Invalid leader space\n");
> + return;
> + }
> +
> + /* Repeat? */
> + if (get_bits(data, 1)) {
> + if (!data->keypressed) {
> + dev_dbg(dev, "NEC - Stray repeat message\n");
> + return;
> + }
> +
> + dev_dbg(dev, "IR-NEC repeat s %u\n",
> + (unsigned int)data->last_scancode);
> +
> + wbcir_keydown(data, data->last_scancode, data->last_toggle);
> + return;
> + }
> +
> + /* Remaining leader space */
> + if (get_bits(data, 3)) {
> + dev_dbg(dev, "NEC - Invalid leader space\n");
> + return;
> + }
> +
> + address1 = bitrev8(get_bits(data, 8));
> + address2 = bitrev8(get_bits(data, 8));
> + command1 = bitrev8(get_bits(data, 8));
> + command2 = bitrev8(get_bits(data, 8));
> +
> + /* Sanity check */
> + if (data->irdata_error) {
> + dev_dbg(dev, "NEC - Invalid message\n");
> + return;
> + }
> +
> + /* Check command validity */
> + if (command1 != ~command2) {
> + dev_dbg(dev, "NEC - Command bytes mismatch\n");
> + return;
> + }
> +
> + /* Check for extended NEC protocol */
> + address = address1;
> + if (address1 != ~address2)
> + address |= address2 << 8;
> +
> + scancode = address << 8 | command1;
> +
> + dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
> + (unsigned int)address,
> + (unsigned int)command1,
> + (unsigned int)scancode);
> +
> + wbcir_keydown(data, scancode, !data->last_toggle);
> +}
> +
> +
> +
> +/*****************************************************************************
> + *
> + * INTERRUPT FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +static irqreturn_t
> +wbcir_irq_handler(int irqno, void *cookie)
> +{
> + struct pnp_dev *device = cookie;
> + struct wbcir_data *data = pnp_get_drvdata(device);
> + struct device *dev = &device->dev;
> + u8 status;
> + unsigned long flags;
> + u8 irdata[16];
> + int i;
> + unsigned int hw;
> +
> + spin_lock_irqsave(&wbcir_lock, flags);
> +
> + wbcir_select_bank(data, WBCIR_BANK_0);
> +
> + status = inb(data->sbase + WBCIR_REG_SP3_EIR);
> +
> + if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
> + spin_unlock_irqrestore(&wbcir_lock, flags);
> + return IRQ_NONE;
> + }
> +
> + if (status & WBCIR_IRQ_ERR)
> + data->irdata_error = 1;
> +
> + if (!(status & WBCIR_IRQ_RX))
> + goto out;
> +
> + /* Since RXHDLEV is set, at least 16 bytes are in the FIFO */
> + insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
> + insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[8], 8);
> +
> + for (i = 0; i < sizeof(data); i++) {
> + hw = hweight8(irdata[i]);
> + if (hw > 4)
> + add_irdata_bit(data, 0);
> + else
> + add_irdata_bit(data, 1);
> +
> + if (hw == 8)
> + data->idle_count++;
> + else
> + data->idle_count = 0;
> + }
> +
> + if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
> + /* Drain the FIFO */
> + while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
> + inb(data->sbase + WBCIR_REG_SP3_RXDATA);
> +
> + /* And set RXINACTIVE */
> + outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
> +
> + dev_dbg(dev, "IRDATA:\n");
> + for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
> + dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
> +
> + switch (protocol) {
> + case IR_PROTOCOL_RC5:
> + wbcir_parse_rc5(dev, data);
> + break;
> + case IR_PROTOCOL_RC6:
> + wbcir_parse_rc6(dev, data);
> + break;
> + case IR_PROTOCOL_NEC:
> + wbcir_parse_nec(dev, data);
> + break;
> + }
> +
> + wbcir_reset_irdata(data);
> + data->idle_count = 0;
> + }
> +
> +out:
> + spin_unlock_irqrestore(&wbcir_lock, flags);
> + return IRQ_HANDLED;
> +}
> +
> +
> +
> +/*****************************************************************************
> + *
> + * SUSPEND/RESUME FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +static void
> +wbcir_shutdown(struct pnp_dev *device)
> +{
> + struct device *dev = &device->dev;
> + struct wbcir_data *data = pnp_get_drvdata(device);
> + int do_wake = 1;
> + u8 match[11];
> + u8 mask[11];
> + u8 rc6_csl = 0;
> + int i;
> +
> + memset(match, 0, sizeof(match));
> + memset(mask, 0, sizeof(mask));
> +
> + if (wake_sc == INVALID_SCANCODE || !device_may_wakeup(dev)) {
> + do_wake = 0;
> + goto finish;
> + }
> +
> + switch (protocol) {
> + case IR_PROTOCOL_RC5:
> + if (wake_sc > 0xFFF) {
> + do_wake = 0;
> + dev_err(dev, "RC5 - Invalid wake scancode\n");
> + break;
> + }
> +
> + /* Mask = 13 bits, ex toggle */
> + mask[0] = 0xFF;
> + mask[1] = 0x17;
> +
> + match[0] = (wake_sc & 0x003F); /* 6 command bits */
> + match[0] |= (wake_sc & 0x0180) >> 1; /* 2 address bits */
> + match[1] = (wake_sc & 0x0E00) >> 9; /* 3 address bits */
> + if (!(wake_sc & 0x0040)) /* 2nd start bit */
> + match[1] |= 0x10;
> +
> + break;
> +
> + case IR_PROTOCOL_NEC:
> + if (wake_sc > 0xFFFFFF) {
> + do_wake = 0;
> + dev_err(dev, "NEC - Invalid wake scancode\n");
> + break;
> + }
> +
> + mask[0] = mask[1] = mask[2] = mask[3] = 0xFF;
> +
> + match[1] = bitrev8((wake_sc & 0xFF));
> + match[0] = ~match[1];
> +
> + match[3] = bitrev8((wake_sc & 0xFF00) >> 8);
> + if (wake_sc > 0xFFFF)
> + match[2] = bitrev8((wake_sc & 0xFF0000) >> 16);
> + else
> + match[2] = ~match[3];
> +
> + break;
> +
> + case IR_PROTOCOL_RC6:
> +
> + if (wake_rc6mode == 0) {
> + if (wake_sc > 0xFFFF) {
> + do_wake = 0;
> + dev_err(dev, "RC6 - Invalid wake scancode\n");
> + break;
> + }
> +
> + /* Command */
> + match[0] = wbcir_to_rc6cells(wake_sc >> 0);
> + mask[0] = 0xFF;
> + match[1] = wbcir_to_rc6cells(wake_sc >> 4);
> + mask[1] = 0xFF;
> +
> + /* Address */
> + match[2] = wbcir_to_rc6cells(wake_sc >> 8);
> + mask[2] = 0xFF;
> + match[3] = wbcir_to_rc6cells(wake_sc >> 12);
> + mask[3] = 0xFF;
> +
> + /* Header */
> + match[4] = 0x50; /* mode1 = mode0 = 0, ignore toggle */
> + mask[4] = 0xF0;
> + match[5] = 0x09; /* start bit = 1, mode2 = 0 */
> + mask[5] = 0x0F;
> +
> + rc6_csl = 44;
> +
> + } else if (wake_rc6mode == 6) {
> + i = 0;
> +
> + /* Command */
> + match[i] = wbcir_to_rc6cells(wake_sc >> 0);
> + mask[i++] = 0xFF;
> + match[i] = wbcir_to_rc6cells(wake_sc >> 4);
> + mask[i++] = 0xFF;
> +
> + /* Address + Toggle */
> + match[i] = wbcir_to_rc6cells(wake_sc >> 8);
> + mask[i++] = 0xFF;
> + match[i] = wbcir_to_rc6cells(wake_sc >> 12);
> + mask[i++] = 0x3F;
> +
> + /* Customer bits 7 - 0 */
> + match[i] = wbcir_to_rc6cells(wake_sc >> 16);
> + mask[i++] = 0xFF;
> + match[i] = wbcir_to_rc6cells(wake_sc >> 20);
> + mask[i++] = 0xFF;
> +
> + if (wake_sc & 0x80000000) {
> + /* Customer range bit and bits 15 - 8 */
> + match[i] = wbcir_to_rc6cells(wake_sc >> 24);
> + mask[i++] = 0xFF;
> + match[i] = wbcir_to_rc6cells(wake_sc >> 28);
> + mask[i++] = 0xFF;
> + rc6_csl = 76;
> + } else if (wake_sc <= 0x007FFFFF) {
> + rc6_csl = 60;
> + } else {
> + do_wake = 0;
> + dev_err(dev, "RC6 - Invalid wake scancode\n");
> + break;
> + }
> +
> + /* Header */
> + match[i] = 0x93; /* mode1 = mode0 = 1, submode = 0 */
> + mask[i++] = 0xFF;
> + match[i] = 0x0A; /* start bit = 1, mode2 = 1 */
> + mask[i++] = 0x0F;
> +
> + } else {
> + do_wake = 0;
> + dev_err(dev, "RC6 - Invalid wake mode\n");
> + }
> +
> + break;
> +
> + default:
> + do_wake = 0;
> + break;
> + }
> +
> +finish:
> + if (do_wake) {
> + /* Set compare and compare mask */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
> + WBCIR_REGSEL_COMPARE | WBCIR_REG_ADDR0,
> + 0x3F);
> + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, match, 11);
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_INDEX,
> + WBCIR_REGSEL_MASK | WBCIR_REG_ADDR0,
> + 0x3F);
> + outsb(data->wbase + WBCIR_REG_WCEIR_DATA, mask, 11);
> +
> + /* RC6 Compare String Len */
> + outb(rc6_csl, data->wbase + WBCIR_REG_WCEIR_CSL);
> +
> + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
> +
> + /* Clear BUFF_EN, Clear END_EN, Set MATCH_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x01, 0x07);
> +
> + /* Set CEIR_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x01, 0x01);
> +
> + } else {
> + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
> +
> + /* Clear CEIR_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
> + }
> +
> + /* Disable interrupts */
> + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
> +}
> +
> +static int
> +wbcir_suspend(struct pnp_dev *device, pm_message_t state)
> +{
> + wbcir_shutdown(device);
> + return 0;
> +}
> +
> +static int
> +wbcir_resume(struct pnp_dev *device)
> +{
> + struct wbcir_data *data = pnp_get_drvdata(device);
> +
> + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
> +
> + /* Clear CEIR_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
> +
> + /* Enable interrupts */
> + wbcir_reset_irdata(data);
> + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
> +
> + return 0;
> +}
> +
> +
> +
> +/*****************************************************************************
> + *
> + * SETUP/INIT FUNCTIONS
> + *
> + *****************************************************************************/
> +
> +static ssize_t
> +wbcir_show_last_scancode(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct pnp_dev *device = container_of(dev, struct pnp_dev, dev);
> + struct wbcir_data *data = pnp_get_drvdata(device);
> + return sprintf(buf, "0x%08X\n", data->last_scancode);
> +}
> +
> +static struct device_attribute dev_attr_last_scancode = {
> + .attr = {
> + .name = "last_scancode",
> + .mode = 0444,
> + },
> + .show = wbcir_show_last_scancode,
> + .store = NULL,
> +
> +};
Why is this needed? And if this is needed we have a nice macro
for that.
> +
> +static struct attribute *wbcir_attributes[] = {
> + &dev_attr_last_scancode.attr,
> + NULL,
> +};
> +
> +static struct attribute_group wbcir_attribute_group = {
> + .attrs = wbcir_attributes,
> +};
> +
> +static void
> +wbcir_cfg_ceir(struct wbcir_data *data)
> +{
> + u8 tmp;
> +
> + /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
> + tmp = protocol << 4;
> + if (invert)
> + tmp |= 0x08;
> + outb(tmp, data->wbase + WBCIR_REG_WCEIR_CTL);
> +
> + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
> +
> + /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
> +
> + /* Set RC5 cell time to correspond to 36 kHz */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CFG1, 0x4A, 0x7F);
> +
> + /* Set IRTX_INV */
> + if (invert)
> + outb(0x04, data->ebase + WBCIR_REG_ECEIR_CCTL);
> + else
> + outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
> +
> + /*
> + * Clear IR LED, set SP3 clock to 24Mhz
> + * set SP3_IRRX_SW to binary 01, helpfully not documented
> + */
> + outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
> +}
> +
> +static int
> +wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
__devinit
> +{
> + struct device *dev = &device->dev;
> + struct wbcir_data *data;
> + int err;
> +
> + if (!(pnp_port_len(device, 0) == EHFUNC_IOMEM_LEN &&
> + pnp_port_len(device, 1) == WAKEUP_IOMEM_LEN &&
> + pnp_port_len(device, 2) == SP_IOMEM_LEN)) {
> + dev_err(dev, "Invalid resources\n");
> + return -ENODEV;
> + }
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data) {
> + err = -ENOMEM;
> + goto exit;
> + }
> +
> + pnp_set_drvdata(device, data);
> +
> + data->ebase = pnp_port_start(device, 0);
> + data->wbase = pnp_port_start(device, 1);
> + data->sbase = pnp_port_start(device, 2);
> + data->irq = pnp_irq(device, 0);
> +
> + if (data->wbase == 0 || data->ebase == 0 ||
> + data->sbase == 0 || data->irq == 0) {
> + err = -ENODEV;
> + dev_err(dev, "Invalid resources\n");
> + goto exit_free_data;
> + }
> +
> + dev_info(&device->dev, "Found device "
> + "(w: 0x%lX, e: 0x%lX, s: 0x%lX, i: %u)\n",
> + data->wbase, data->ebase, data->sbase, data->irq);
> +
dev_dbg() I think.
> + if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
> + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
> + data->wbase, data->wbase + WAKEUP_IOMEM_LEN - 1);
> + err = -EBUSY;
> + goto exit_free_data;
> + }
> +
> + if (!request_region(data->ebase, EHFUNC_IOMEM_LEN, DRVNAME)) {
> + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
> + data->ebase, data->ebase + EHFUNC_IOMEM_LEN - 1);
> + err = -EBUSY;
> + goto exit_release_wbase;
> + }
> +
> + if (!request_region(data->sbase, SP_IOMEM_LEN, DRVNAME)) {
> + dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
> + data->sbase, data->sbase + SP_IOMEM_LEN - 1);
> + err = -EBUSY;
> + goto exit_release_ebase;
> + }
> +
> + err = request_irq(data->irq, wbcir_irq_handler,
> + IRQF_DISABLED, DRVNAME, device);
> + if (err) {
> + dev_err(dev, "Failed to claim IRQ %u\n", data->irq);
> + err = -EBUSY;
> + goto exit_release_sbase;
> + }
> +
> + led_trigger_register_simple("cir-tx", &data->txtrigger);
> + if (!data->txtrigger) {
> + err = -ENOMEM;
> + goto exit_free_irq;
> + }
> +
> + led_trigger_register_simple("cir-rx", &data->rxtrigger);
> + if (!data->rxtrigger) {
> + err = -ENOMEM;
> + goto exit_unregister_txtrigger;
> + }
> +
> + data->led.name = "cir::activity";
> + data->led.default_trigger = "cir-rx";
> + data->led.brightness_set = wbcir_led_brightness_set;
> + data->led.brightness_get = wbcir_led_brightness_get;
> + err = led_classdev_register(&device->dev, &data->led);
> + if (err)
> + goto exit_unregister_rxtrigger;
> +
> + data->input_dev = input_allocate_device();
> + if (!data->input_dev) {
> + err = -ENOMEM;
> + goto exit_unregister_led;
> + }
> +
> + data->input_dev->evbit[0] = BIT(EV_KEY);
> + data->input_dev->name = WBCIR_ACPI_NAME;
> + data->input_dev->phys = "wbcir/cir0";
> + data->input_dev->id.bustype = BUS_HOST;
> + data->input_dev->id.vendor = PCI_VENDOR_ID_WINBOND;
> + data->input_dev->id.product = WBCIR_ID_FAMILY;
> + data->input_dev->id.version = WBCIR_ID_CHIP;
> + data->input_dev->getkeycode = wbcir_getkeycode;
> + data->input_dev->setkeycode = wbcir_setkeycode;
> + input_set_drvdata(data->input_dev, data);
> +
> + err = input_register_device(data->input_dev);
> + if (err)
> + goto exit_free_input;
> +
> + data->last_scancode = INVALID_SCANCODE;
> + err = sysfs_create_group(&device->dev.kobj, &wbcir_attribute_group);
> + if (err)
> + goto exit_unregister_input;
> +
> + INIT_LIST_HEAD(&data->keytable);
> + setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
> +
> + /* Load default keymaps */
> + if (protocol == IR_PROTOCOL_RC6) {
> + int i;
> + for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
> + err = wbcir_setkeycode(data->input_dev,
> + (int)rc6_def_keymap[i].scancode,
> + (int)rc6_def_keymap[i].keycode);
> + if (err)
> + goto exit_unregister_keys;
> + }
> + }
> +
> + device_init_wakeup(&device->dev, 1);
> +
> + wbcir_cfg_ceir(data);
> +
> + /* Disable interrupts */
> + wbcir_select_bank(data, WBCIR_BANK_0);
> + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
> +
> + /* Enable extended mode */
> + wbcir_select_bank(data, WBCIR_BANK_2);
> + outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1);
> +
> + /*
> + * Configure baud generator, IR data will be sampled at
> + * a bitrate of: (24Mhz * prescaler) / (divisor * 16).
> + *
> + * The ECIR registers include a flag to change the
> + * 24Mhz clock freq to 48Mhz.
> + */
> +
> + /* prescaler 1.0, tx/rx fifo lvl 32 */
> + outb(0x35, data->sbase + WBCIR_REG_SP3_EXCR2);
> +
> + /* Set baud divisor to generate one byte per bit/cell */
> + switch (protocol) {
> + case IR_PROTOCOL_RC5:
> + outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL);
> + break;
> + case IR_PROTOCOL_RC6:
> + outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL);
> + break;
> + case IR_PROTOCOL_NEC:
> + outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL);
> + break;
> + }
> + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
> +
> + /* Set CEIR mode */
> + wbcir_select_bank(data, WBCIR_BANK_0);
> + outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR);
> + inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
> + inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
> +
> + /* Disable RX demod, run-length encoding/decoding, set freq span */
> + wbcir_select_bank(data, WBCIR_BANK_7);
> + outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG);
> +
> + /* Disable timer */
> + wbcir_select_bank(data, WBCIR_BANK_4);
> + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
> +
> + /* Enable MSR interrupt, Clear AUX_IRX */
> + wbcir_select_bank(data, WBCIR_BANK_5);
> + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
> +
> + /* Disable CRC */
> + wbcir_select_bank(data, WBCIR_BANK_6);
> + outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
> +
> + /* Set RX/TX (de)modulation freq, not really used */
> + wbcir_select_bank(data, WBCIR_BANK_7);
> + outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
> + outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
> +
> + /* Set invert and pin direction */
> + if (invert)
> + outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4);
> + else
> + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4);
> +
> + /* Set FIFO thresholds (RX = 16, TX = 7), reset RX/TX */
> + wbcir_select_bank(data, WBCIR_BANK_0);
> + outb(0x97, data->sbase + WBCIR_REG_SP3_FCR);
> +
> + /* Clear AUX status bits */
> + outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
> +
> + /* Enable interrupts */
> + wbcir_select_bank(data, WBCIR_BANK_0);
> + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
> +
> + return 0;
> +
> +exit_unregister_keys:
> + if (!list_empty(&data->keytable)) {
> + struct wbcir_keyentry *key;
> + struct wbcir_keyentry *keytmp;
> +
> + list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
> + list_del(&key->list);
> + kfree(key);
> + }
> + }
> +exit_unregister_input:
> + input_unregister_device(data->input_dev);
> + /* Can't call input_free_device on an unregistered device */
> + data->input_dev = NULL;
> +exit_free_input:
> + input_free_device(data->input_dev);
> +exit_unregister_led:
> + led_classdev_unregister(&data->led);
> +exit_unregister_rxtrigger:
> + led_trigger_unregister_simple(data->rxtrigger);
> +exit_unregister_txtrigger:
> + led_trigger_unregister_simple(data->txtrigger);
> +exit_free_irq:
> + free_irq(data->irq, device);
> +exit_release_sbase:
> + release_region(data->sbase, SP_IOMEM_LEN);
> +exit_release_ebase:
> + release_region(data->ebase, EHFUNC_IOMEM_LEN);
> +exit_release_wbase:
> + release_region(data->wbase, WAKEUP_IOMEM_LEN);
> +exit_free_data:
> + kfree(data);
> + pnp_set_drvdata(device, NULL);
> +exit:
> + return err;
> +}
> +
> +static void
> +wbcir_remove(struct pnp_dev *device)
__devexit
> +{
> + struct wbcir_data *data = pnp_get_drvdata(device);
> + struct wbcir_keyentry *key;
> + struct wbcir_keyentry *keytmp;
> +
> + /* Disable interrupts */
> + wbcir_select_bank(data, WBCIR_BANK_0);
> + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
> +
> + del_timer_sync(&data->timer_keyup);
> +
> + free_irq(data->irq, device);
> +
> + /* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_STS, 0x17, 0x17);
> +
> + /* Clear CEIR_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
> +
> + /* Clear BUFF_EN, END_EN, MATCH_EN */
> + wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
> +
> + sysfs_remove_group(&device->dev.kobj, &wbcir_attribute_group);
> +
> + /* This will generate a keyup event if necessary */
> + input_unregister_device(data->input_dev);
> +
> + led_trigger_unregister_simple(data->rxtrigger);
> + led_trigger_unregister_simple(data->txtrigger);
> + led_classdev_unregister(&data->led);
> +
> + /* This is ok since &data->led isn't actually used */
> + wbcir_led_brightness_set(&data->led, LED_OFF);
> +
> + release_region(data->wbase, WAKEUP_IOMEM_LEN);
> + release_region(data->ebase, EHFUNC_IOMEM_LEN);
> + release_region(data->sbase, SP_IOMEM_LEN);
> +
> + list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
> + list_del(&key->list);
> + kfree(key);
> + }
> +
> + kfree(data);
> +
> + pnp_set_drvdata(device, NULL);
> +}
> +
> +static const struct pnp_device_id wbcir_ids[] = {
> + { "WEC1022", 0 },
> + { "", 0 }
> +};
> +MODULE_DEVICE_TABLE(pnp, wbcir_ids);
> +
> +static struct pnp_driver wbcir_driver = {
> + .name = WBCIR_ACPI_NAME,
> + .id_table = wbcir_ids,
> + .probe = wbcir_probe,
> + .remove = wbcir_remove,
__devexit_p()
> + .suspend = wbcir_suspend,
> + .resume = wbcir_resume,
Switch to dev_pm_ops?
> + .shutdown = wbcir_shutdown
> +};
> +
> +static int __init
> +wbcir_init(void)
> +{
> + int ret;
> +
> + switch (protocol) {
> + case IR_PROTOCOL_RC5:
> + case IR_PROTOCOL_NEC:
> + case IR_PROTOCOL_RC6:
> + break;
> + default:
> + printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
> + return -EINVAL;
> + }
> +
> + ret = pnp_register_driver(&wbcir_driver);
> + if (ret)
> + printk(KERN_ERR DRVNAME ": Unable to register driver\n");
> +
> + return ret;
> +}
> +
> +static void __exit
> +wbcir_exit(void)
> +{
> + pnp_unregister_driver(&wbcir_driver);
> +}
> +
> +MODULE_AUTHOR("David Härdeman <david@...deman.nu>");
> +MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
> +MODULE_LICENSE("GPL");
> +
> +module_init(wbcir_init);
> +module_exit(wbcir_exit);
> +
> +
>
> --
> David Härdeman
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists