| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20090816193057.3789.39737.sendpatchset@localhost.localdomain>
Date: Sun, 16 Aug 2009 21:30:57 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: "Greg Kroah-Hartman" <gregkh@...e.de>
Cc: devel@...verdev.osuosl.org,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 11/22] Staging: rtxxx0: remove superfluous RT30xx ifdefs
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] Staging: rtxxx0: remove superfluous RT30xx ifdefs
* add !RT30xx version of IS_RT3090() macro
* remove superfluous RT30xx ifdefs
* unify RT30xx and !RT30xx code where possible
* kill RT28XX_UPDATE_PROTECT() macro
* remove needless variable initializations
* kill some needless function prototypes
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/staging/rt2860/common/action.c | 11 ----
drivers/staging/rt2860/common/ba_action.c | 8 ---
drivers/staging/rt2860/common/cmm_data.c | 4 +
drivers/staging/rt2860/common/eeprom.c | 18 +-----
drivers/staging/rt2860/common/mlme.c | 65 ++++---------------------
drivers/staging/rt2860/common/rtmp_init.c | 6 --
drivers/staging/rt2860/oid.h | 8 ---
drivers/staging/rt2860/rt28xx.h | 19 -------
drivers/staging/rt2860/rtmp.h | 20 -------
drivers/staging/rt2860/rtmp_def.h | 6 --
drivers/staging/rt2860/sta/connect.c | 11 +---
drivers/staging/rt2860/sta/rtmp_data.c | 10 +--
drivers/staging/rt2860/sta_ioctl.c | 10 +--
drivers/staging/rt2860/wpa.h | 2
drivers/staging/rt2870/2870_main_dev.c | 5 -
drivers/staging/rt2870/common/2870_rtmp_init.c | 5 -
drivers/staging/rt2870/rt2870.h | 19 -------
17 files changed, 34 insertions(+), 193 deletions(-)
Index: b/drivers/staging/rt2860/common/action.c
===================================================================
--- a/drivers/staging/rt2860/common/action.c
+++ b/drivers/staging/rt2860/common/action.c
@@ -528,15 +528,8 @@ VOID SendRefreshBAR(
sizeof(FRAME_BAR), &FrameBar,
END_OF_ARGS);
- if (1) // Now we always send BAR.
- {
-#ifndef RT30xx
- MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
-#endif
-#ifdef RT30xx
- MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
-#endif
- }
+ MiniportMMRequest(pAd, QID_AC_BE, pOutBuffer, FrameLen);
+
MlmeFreeMemory(pAd, pOutBuffer);
}
}
Index: b/drivers/staging/rt2860/common/ba_action.c
===================================================================
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -1391,10 +1391,8 @@ VOID SendPSMPAction(
//ULONG Idx;
FRAME_PSMP_ACTION Frame;
ULONG FrameLen;
-#ifdef RT30xx
UCHAR bbpdata=0;
UINT32 macdata;
-#endif // RT30xx //
NStatus = MlmeAllocateMemory(pAd, &pOutBuffer); //Get an unused nonpaged memory
if (NStatus != NDIS_STATUS_SUCCESS)
@@ -1410,7 +1408,6 @@ VOID SendPSMPAction(
switch (Psmp)
{
case MMPS_ENABLE:
-#ifdef RT30xx
if (IS_RT3090(pAd))
{
// disable MMPS BBP control register
@@ -1423,11 +1420,9 @@ VOID SendPSMPAction(
macdata &= ~(0x09); //bit 0, 3
RTMP_IO_WRITE32(pAd, 0x1210, macdata);
}
-#endif // RT30xx //
Frame.Psmp = 0;
break;
case MMPS_DYNAMIC:
-#ifdef RT30xx
if (IS_RT3090(pAd))
{
// enable MMPS BBP control register
@@ -1440,11 +1435,9 @@ VOID SendPSMPAction(
macdata |= 0x09; //bit 0, 3
RTMP_IO_WRITE32(pAd, 0x1210, macdata);
}
-#endif // RT30xx //
Frame.Psmp = 3;
break;
case MMPS_STATIC:
-#ifdef RT30xx
if (IS_RT3090(pAd))
{
// enable MMPS BBP control register
@@ -1457,7 +1450,6 @@ VOID SendPSMPAction(
macdata |= 0x09; //bit 0, 3
RTMP_IO_WRITE32(pAd, 0x1210, macdata);
}
-#endif // RT30xx //
Frame.Psmp = 1;
break;
}
Index: b/drivers/staging/rt2860/common/cmm_data.c
===================================================================
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -2616,7 +2616,9 @@ BOOLEAN MacTableDeleteEntry(
AsicUpdateProtect(pAd, 0 /*pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode*/, (ALLN_SETPROTECT), TRUE, 0 /*pAd->MacTab.fAnyStationNonGF*/);
#endif
#ifdef RT30xx
- RT28XX_UPDATE_PROTECT(pAd); // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+ // edit by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
+ // Set MAC register value according operation mode
+ RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
#endif
}
Index: b/drivers/staging/rt2860/common/eeprom.c
===================================================================
--- a/drivers/staging/rt2860/common/eeprom.c
+++ b/drivers/staging/rt2860/common/eeprom.c
@@ -73,16 +73,12 @@ USHORT ShiftInBits(
RaiseClock(pAd, &x);
RTMP_IO_READ32(pAd, E2PROM_CSR, &x);
-#ifdef RT30xx
- LowerClock(pAd, &x); //prevent read failed
-#endif
+
+ LowerClock(pAd, &x); /* prevent read failed */
+
x &= ~(EEDI);
if(x & EEDO)
data |= 1;
-
-#ifndef RT30xx
- LowerClock(pAd, &x);
-#endif
}
return data;
@@ -201,17 +197,13 @@ USHORT RTMP_EEPROM_READ16(
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-#ifdef RT30xx
// patch can not access e-Fuse issue
if (!IS_RT3090(pAd))
{
-#endif
// kick a pulse
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
-#ifdef RT30xx
}
-#endif
// output the read_opcode and register number in that order
ShiftOutBits(pAd, EEPROM_READ_OPCODE, 3);
@@ -262,17 +254,13 @@ VOID RTMP_EEPROM_WRITE16(
x |= EECS;
RTMP_IO_WRITE32(pAd, E2PROM_CSR, x);
-#ifdef RT30xx
// patch can not access e-Fuse issue
if (!IS_RT3090(pAd))
{
-#endif
// kick a pulse
RaiseClock(pAd, &x);
LowerClock(pAd, &x);
-#ifdef RT30xx
}
-#endif
// output the read_opcode ,register number and data in that order
ShiftOutBits(pAd, EEPROM_WRITE_OPCODE, 3);
Index: b/drivers/staging/rt2860/common/mlme.c
===================================================================
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -449,13 +449,7 @@ FREQUENCY_ITEM FreqItems3020[] =
{13, 247, 2, 2},
{14, 248, 2, 4},
};
-#ifndef RT30xx
-#define NUM_OF_3020_CHNL (sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM))
-#endif
-#ifdef RT30xx
-//2008/07/10:KH Modified to share this variable
UCHAR NUM_OF_3020_CHNL=(sizeof(FreqItems3020) / sizeof(FREQUENCY_ITEM));
-#endif
/*
==========================================================================
@@ -3949,14 +3943,12 @@ VOID BssTableSsidSort(
continue;
// check group cipher
+ if (
#ifndef RT30xx
- if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
- (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
- (pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled))
-#endif
-#ifdef RT30xx
- if (pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
+ pInBss->WPA.GroupCipher != Ndis802_11GroupWEP40Enabled &&
+ pInBss->WPA.GroupCipher != Ndis802_11GroupWEP104Enabled &&
#endif
+ pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher)
continue;
// check pairwise cipher, skip if none matched
@@ -3975,14 +3967,12 @@ VOID BssTableSsidSort(
continue;
// check group cipher
+ if (
#ifndef RT30xx
- if ((pAd->StaCfg.WepStatus < pInBss->WPA.GroupCipher) &&
- (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled) &&
- (pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled))
-#endif
-#ifdef RT30xx
- if (pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
+ pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP40Enabled &&
+ pInBss->WPA2.GroupCipher != Ndis802_11GroupWEP104Enabled &&
#endif
+ pAd->StaCfg.WepStatus < pInBss->WPA2.GroupCipher)
continue;
// check pairwise cipher, skip if none matched
@@ -8229,7 +8219,6 @@ VOID AsicSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant)
{
-#ifdef RT30xx
UINT32 Value;
UINT32 x;
@@ -8268,7 +8257,6 @@ VOID AsicSetRxAnt(
RTMP_IO_WRITE32(pAd, GPIO_CTRL_CFG, Value);
DBGPRINT_RAW(RT_DEBUG_TRACE, ("AsicSetRxAnt, switch to aux antenna\n"));
}
-#endif // RT30xx //
}
#endif /* RT30xx */
@@ -8330,9 +8318,7 @@ VOID AsicEvaluateRxAnt(
fRTMP_ADAPTER_NIC_NOT_EXIST |
fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS) ||
OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
-#ifdef RT30xx
|| (pAd->EepromAccess)
-#endif // RT30xx //
)
return;
@@ -8822,27 +8808,13 @@ VOID AsicStaBbpTuning(
{
R66 = 0x1C + 2*GET_LNA_GAIN(pAd) + 0x20;
if (OrigR66Value != R66)
- {
-#ifndef RT30xx
- RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
-#endif
-#ifdef RT30xx
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-#endif
- }
}
else
{
R66 = 0x1C + 2*GET_LNA_GAIN(pAd);
if (OrigR66Value != R66)
- {
-#ifndef RT30xx
- RTUSBWriteBBPRegister(pAd, BBP_R66, R66);
-#endif
-#ifdef RT30xx
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
-#endif
- }
}
}
else
@@ -9051,15 +9023,13 @@ VOID AsicTurnOffRFClk(
UCHAR index;
RTMP_RF_REGS *RFRegTable;
-#ifdef RT30xx
// The RF programming sequence is difference between 3xxx and 2xxx
if (IS_RT3090(pAd))
{
RT30xxLoadRFSleepModeSetup(pAd); // add by johnli, RF power sequence setup, load RF sleep-mode setup
+ return;
}
- else
- {
-#endif // RT30xx //
+
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType)
@@ -9101,10 +9071,6 @@ VOID AsicTurnOffRFClk(
default:
break;
}
-#ifdef RT30xx
- }
-#endif // RT30xx //
-
}
@@ -9118,14 +9084,10 @@ VOID AsicTurnOnRFClk(
UCHAR index;
RTMP_RF_REGS *RFRegTable;
-#ifdef RT30xx
// The RF programming sequence is difference between 3xxx and 2xxx
if (IS_RT3090(pAd))
- {
- }
- else
- {
-#endif // RT30xx //
+ return;
+
RFRegTable = RF2850RegTable;
switch (pAd->RfIcType)
@@ -9178,8 +9140,5 @@ VOID AsicTurnOnRFClk(
pAd->RfIcType,
R2));
#endif
-#ifdef RT30xx
- }
-#endif // RT30xx //
}
Index: b/drivers/staging/rt2860/common/rtmp_init.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -1675,7 +1675,6 @@ VOID NICReadEEPROMParameters(
Antenna.word = pAd->EEPROMDefaultValue[0];
if (Antenna.word == 0xFFFF)
{
-#ifdef RT30xx
if(IS_RT3090(pAd))
{
Antenna.word = 0;
@@ -1685,15 +1684,12 @@ VOID NICReadEEPROMParameters(
}
else
{
-#endif // RT30xx //
Antenna.word = 0;
Antenna.field.RfIcType = RFIC_2820;
Antenna.field.TxPath = 1;
Antenna.field.RxPath = 2;
DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word));
-#ifdef RT30xx
}
-#endif // RT30xx //
}
// Choose the desired Tx&Rx stream.
@@ -2445,7 +2441,6 @@ NDIS_STATUS NICInitializeAsic(
}
}
-#ifdef RT30xx
// Initialize RT3070 serial MAc registers which is different from RT2870 serial
if (IS_RT3090(pAd))
{
@@ -2468,6 +2463,7 @@ NDIS_STATUS NICInitializeAsic(
RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0);
}
}
+#ifdef RT30xx
else if (IS_RT3070(pAd))
{
RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0);
Index: b/drivers/staging/rt2860/oid.h
===================================================================
--- a/drivers/staging/rt2860/oid.h
+++ b/drivers/staging/rt2860/oid.h
@@ -535,10 +535,8 @@ typedef enum _NDIS_802_11_WEP_STATUS
Ndis802_11Encryption3KeyAbsent,
Ndis802_11Encryption4Enabled, // TKIP or AES mix
Ndis802_11Encryption4KeyAbsent,
-#ifndef RT30xx
Ndis802_11GroupWEP40Enabled,
Ndis802_11GroupWEP104Enabled,
-#endif
} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
@@ -626,17 +624,13 @@ typedef struct _NDIS_802_11_CAPABILITY
NDIS_802_11_AUTHENTICATION_ENCRYPTION AuthenticationEncryptionSupported[1];
} NDIS_802_11_CAPABILITY, *PNDIS_802_11_CAPABILITY;
-#ifdef RT30xx
#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
-#endif
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
#ifdef DBG
#define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03)
#define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05)
-#ifdef RT30xx
#define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13)
-#endif
#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07)
#endif
@@ -660,7 +654,7 @@ enum {
RAIO_OFF = 10,
RAIO_ON = 11,
SHOW_CFG_VALUE = 20,
-#if !defined(RT2860) && !defined(RT30xx)
+#if !defined(RT2860)
SHOW_ADHOC_ENTRY_INFO = 21,
#endif
};
Index: b/drivers/staging/rt2860/rt28xx.h
===================================================================
--- a/drivers/staging/rt2860/rt28xx.h
+++ b/drivers/staging/rt2860/rt28xx.h
@@ -49,14 +49,8 @@
typedef int NTSTATUS;
-#ifdef RT30xx
#define OPT_14 0x114
-#define RETRY_LIMIT 10
-#define STATUS_SUCCESS 0x00
-#define STATUS_UNSUCCESSFUL 0x01
-#endif
-
//
// SCH/DMA registers - base address 0x0200
//
@@ -292,7 +286,6 @@ typedef union _USB_DMA_CFG_STRUC {
#define PBF_DBG 0x043c
#define PBF_CAP_CTRL 0x0440
-#ifdef RT30xx
// eFuse registers
#define EFUSE_CTRL 0x0580
#define EFUSE_DATA0 0x0590
@@ -320,7 +313,6 @@ typedef union _EFUSE_CTRL_STRUC {
#define LDO_CFG0 0x05d4
#define GPIO_SWITCH 0x05dc
-#endif /* RT30xx */
//
// 4 MAC registers
@@ -1137,9 +1129,7 @@ typedef struct _HW_WCID_ENTRY { // 8-by
#define BBP_R22 22
#define BBP_R24 24
#define BBP_R25 25
-#ifdef RT30xx
#define BBP_R31 31
-#endif
#define BBP_R49 49 //TSSI
#define BBP_R50 50
#define BBP_R51 51
@@ -1157,10 +1147,8 @@ typedef struct _HW_WCID_ENTRY { // 8-by
#define BBP_R73 73
#define BBP_R75 75
#define BBP_R77 77
-#ifdef RT30xx
#define BBP_R79 79
#define BBP_R80 80
-#endif
#define BBP_R81 81
#define BBP_R82 82
#define BBP_R83 83
@@ -1182,9 +1170,7 @@ typedef struct _HW_WCID_ENTRY { // 8-by
#define BBP_R121 121
#define BBP_R122 122
#define BBP_R123 123
-#ifdef RT30xx
#define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
-#endif // RT30xx //
#define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db
@@ -1608,15 +1594,10 @@ typedef union _EEPROM_NIC_CINFIG2_STRUC
USHORT EnableWPSPBC:1; // WPS PBC Control bit
USHORT BW40MAvailForG:1; // 0:enable, 1:disable
USHORT BW40MAvailForA:1; // 0:enable, 1:disable
-#ifndef RT30xx
- USHORT Rsv2:6; // must be 0
-#endif
-#ifdef RT30xx
USHORT Rsv1:1; // must be 0
USHORT AntDiversity:1; // Antenna diversity
USHORT Rsv2:3; // must be 0
USHORT DACTestBit:1; // control if driver should patch the DAC issue
-#endif
} field;
USHORT word;
} EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
Index: b/drivers/staging/rt2860/rtmp.h
===================================================================
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -403,6 +403,8 @@ typedef struct _QUEUE_HEADER {
#ifdef RT30xx
// We will have a cost down version which mac version is 0x3090xxxx
#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
+#else
+#define IS_RT3090(_pAd) 0
#endif
#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
#ifdef RT30xx
@@ -928,7 +930,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST
}
#endif // RT2870 //
-#ifdef RT30xx
//Need to collect each ant's rssi concurrently
//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2) \
@@ -960,8 +961,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST
_pAd->RxAnt.RcvPktNumWhenEvaluate++; \
} \
}
-#endif // RT30xx //
-
#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \
NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
@@ -4885,11 +4884,9 @@ CHAR RTMPMaxRssi(
IN CHAR Rssi1,
IN CHAR Rssi2);
-#ifdef RT30xx
VOID AsicSetRxAnt(
IN PRTMP_ADAPTER pAd,
IN UCHAR Ant);
-#endif
VOID AsicEvaluateRxAnt(
IN PRTMP_ADAPTER pAd);
@@ -5564,11 +5561,6 @@ VOID RTMPSendTriggerFrame(
IN UCHAR TxRate,
IN BOOLEAN bQosNull);
-#ifdef RT30xx
-VOID RTMPFilterCalibration(
- IN PRTMP_ADAPTER pAd);
-#endif // RT30xx //
-
/* timeout -- ms */
VOID RTMP_SetPeriodicTimer(
IN NDIS_MINIPORT_TIMER *pTimer,
@@ -6538,8 +6530,6 @@ NTSTATUS RT30xxReadRFRegister(
IN UCHAR RegID,
IN PUCHAR pValue);
-#ifdef RT30xx
-//2008/09/11:KH add to support efuse<--
UCHAR eFuseReadRegisters(
IN PRTMP_ADAPTER pAd,
IN USHORT Offset,
@@ -6615,11 +6605,7 @@ NDIS_STATUS NICLoadEEPROM(
BOOLEAN bNeedLoadEEPROM(
IN PRTMP_ADAPTER pAd);
-//2008/09/11:KH add to support efuse-->
-#endif // RT30xx //
-#ifdef RT30xx
-// add by johnli, RF power sequence setup
VOID RT30xxLoadRFNormalModeSetup(
IN PRTMP_ADAPTER pAd);
@@ -6628,8 +6614,6 @@ VOID RT30xxLoadRFSleepModeSetup(
VOID RT30xxReverseRFSleepModeSetup(
IN PRTMP_ADAPTER pAd);
-// end johnli
-#endif // RT30xx //
#ifdef RT2870
//
Index: b/drivers/staging/rt2860/rtmp_def.h
===================================================================
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -148,11 +148,7 @@
#define MAX_PACKETS_IN_PS_QUEUE 128 //32
#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
-#ifdef RT30xx
-//2008/09/11:KH add to support efuse<--
#define MAX_EEPROM_BIN_FILE_SIZE 1024
-//2008/09/11:KH add to support efuse-->
-#endif
// RxFilter
#define STANORMAL 0x17f97
@@ -1210,10 +1206,8 @@
#define RFIC_2750 4 // 2.4G/5G 1T2R
#define RFIC_3020 5 // 2.4G 1T1R
#define RFIC_2020 6 // 2.4G B/G
-#ifdef RT30xx
#define RFIC_3021 7 // 2.4G 1T2R
#define RFIC_3022 8 // 2.4G 2T2R
-#endif
// LED Status.
#define LED_LINK_DOWN 0
Index: b/drivers/staging/rt2860/sta/connect.c
===================================================================
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -1711,15 +1711,12 @@ VOID LinkUp(
// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
//
// if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is.
+ if (
#ifdef RT30xx
- if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) &&
+ !(pAd->CommonCfg.RxStream == 1 && pAd->CommonCfg.TxStream == 1) &&
+#endif
(((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))))
-#endif
-#ifndef RT30xx
- if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
- || ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
-#endif
{
RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
Data &= 0xFFFFFF00;
@@ -2101,7 +2098,6 @@ VOID LinkDown(
wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
}
-#ifdef RT30xx
if (IS_RT3090(pAd))
{
UINT32 macdata;
@@ -2115,7 +2111,6 @@ VOID LinkDown(
macdata &= ~(0x09); //bit 0, 3
RTMP_IO_WRITE32(pAd, 0x1210, macdata);
}
-#endif // RT30xx //
}
/*
Index: b/drivers/staging/rt2860/sta/rtmp_data.c
===================================================================
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -575,14 +575,12 @@ VOID STAHandleRxMgmtFrame(
{
// We should collect RSSI not only U2M data but also my beacon
+ if (
#ifdef RT30xx
- if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))
- && (pAd->RxAnt.EvaluatePeriod == 0))
+ pAd->RxAnt.EvaluatePeriod == 0 &&
#endif
-#ifndef RT30xx
- if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))
-#endif
- {
+ pHeader->FC.SubType == SUBTYPE_BEACON &&
+ MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)) {
Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
pAd->StaCfg.LastSNR0 = (UCHAR)(pRxWI->SNR0);
Index: b/drivers/staging/rt2860/sta_ioctl.c
===================================================================
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -1676,15 +1676,11 @@ int rt_ioctl_siwencode(struct net_device
pAdapter->StaCfg.OrigWepStatus = pAdapter->StaCfg.WepStatus;
pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
goto done;
- }
+ } else if (
#ifndef RT30xx
- else if ((erq->length == 0) &&
- (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
-#endif
-#ifdef RT30xx
- else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)
+ erq->length == 0 &&
#endif
- {
+ (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)) {
STA_PORT_SECURED(pAdapter);
pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
pAdapter->StaCfg.GroupCipher = Ndis802_11WEPEnabled;
Index: b/drivers/staging/rt2860/wpa.h
===================================================================
--- a/drivers/staging/rt2860/wpa.h
+++ b/drivers/staging/rt2860/wpa.h
@@ -90,9 +90,7 @@
#define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
#define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
#define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY))
-#ifndef RT30xx
#define MIN_LEN_OF_GTK 5
-#endif
// RSN IE Length definition
#define MAX_LEN_OF_RSNIE 90
Index: b/drivers/staging/rt2870/2870_main_dev.c
===================================================================
--- a/drivers/staging/rt2870/2870_main_dev.c
+++ b/drivers/staging/rt2870/2870_main_dev.c
@@ -1101,12 +1101,7 @@ BOOLEAN RT28XXChipsetCheck(
if (dev_p->descriptor.idVendor == rtusb_usb_id[i].idVendor &&
dev_p->descriptor.idProduct == rtusb_usb_id[i].idProduct)
{
-#ifndef RT30xx
printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
-#endif
-#ifdef RT30xx
- printk("rt2870: idVendor = 0x%x, idProduct = 0x%x\n",
-#endif
dev_p->descriptor.idVendor, dev_p->descriptor.idProduct);
break;
}
Index: b/drivers/staging/rt2870/common/2870_rtmp_init.c
===================================================================
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -737,12 +737,7 @@ NDIS_STATUS CreateThreads(
{
PRTMP_ADAPTER pAd = net_dev->ml_priv;
POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;
-#ifndef RT30xx
- pid_t pid_number = -1;
-#endif
-#ifdef RT30xx
pid_t pid_number;
-#endif
//init_MUTEX(&(pAd->usbdev_semaphore));
Index: b/drivers/staging/rt2870/rt2870.h
===================================================================
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -46,9 +46,7 @@
#define MAX_TXBULK_SIZE (LOCAL_TXBUF_SIZE*BULKAGGRE_ZISE)
#define MAX_RXBULK_SIZE (LOCAL_TXBUF_SIZE*RXBULKAGGRE_ZISE)
#define MAX_MLME_HANDLER_MEMORY 20
-#ifndef RT30xx
#define RETRY_LIMIT 10
-#endif
#define BUFFER_SIZE 2400 //2048
#define TX_RING 0xa
#define PRIO_RING 0xc
@@ -64,9 +62,7 @@
#define fRTUSB_BULK_OUT_DATA_NORMAL_2 0x00020000
#define fRTUSB_BULK_OUT_DATA_NORMAL_3 0x00040000
#define fRTUSB_BULK_OUT_DATA_NORMAL_4 0x00080000
-#ifdef RT30xx
#define fRTUSB_BULK_OUT_DATA_NORMAL_5 0x00100000
-#endif
#define fRTUSB_BULK_OUT_PSPOLL 0x00000020
#define fRTUSB_BULK_OUT_DATA_FRAG 0x00000040
@@ -284,14 +280,6 @@ extern UCHAR EpToQueue[6];
RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_SET_CLIENT_MAC_ENTRY, \
pEntry, sizeof(MAC_TABLE_ENTRY));
-#ifdef RT30xx
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
-// Set MAC register value according operation mode
-#define RT28XX_UPDATE_PROTECT(pAd) \
- RTUSBEnqueueInternalCmd(pAd, CMDTHREAD_UPDATE_PROTECT, NULL, 0);
-// end johnli
-#endif
-
// remove Pair-wise key material from ASIC
// yet implement
#define RT28XX_STA_ENTRY_KEY_DEL(pAd, BssIdx, Wcid)
@@ -383,10 +371,8 @@ extern UCHAR EpToQueue[6];
#define RT28xx_CHIP_NAME "RT2870"
#endif
#define USB_CYC_CFG 0x02a4
-#ifndef RT30xx
#define STATUS_SUCCESS 0x00
#define STATUS_UNSUCCESSFUL 0x01
-#endif
#define NT_SUCCESS(status) (((status) > 0) ? (1):(0))
#define InterlockedIncrement atomic_inc
#define NdisInterlockedIncrement atomic_inc
@@ -595,12 +581,7 @@ typedef struct _CMDHandler_TLV {
#define CMDTHREAD_802_11_SET_STA_CONFIG 0x0D790111 // cmd
#define CMDTHREAD_802_11_SET_PREAMBLE 0x0D790101 // cmd
#define CMDTHREAD_802_11_COUNTER_MEASURE 0x0D790102 // cmd
-
-#ifdef RT30xx
-// add by johnli, fix "in_interrupt" error when call "MacTableDeleteEntry" in Rx tasklet
#define CMDTHREAD_UPDATE_PROTECT 0x0D790103 // cmd
-// end johnli
-#endif
#define WPA1AKMBIT 0x01
#define WPA2AKMBIT 0x02
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists