| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20090816193104.3789.12936.sendpatchset@localhost.localdomain>
Date: Sun, 16 Aug 2009 21:31:04 +0200
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: "Greg Kroah-Hartman" <gregkh@...e.de>
Cc: devel@...verdev.osuosl.org,
Bartlomiej Zolnierkiewicz <bzolnier@...il.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH 12/22] Staging: rtxxx0: unify RT{USB,MP}FilterCalibration()
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
Subject: [PATCH] Staging: rtxxx0: unify RT{USB,MP}FilterCalibration()
RTMP_BBP_IO_{READ,WRITE}8_BY_REG_ID equals RTUSB{Read,Write}BBPRegister
in case of USB chipsets so unify RT30xx and !RT30xx code.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/staging/rt2860/common/rtmp_init.c | 154 +-----------------------------
1 file changed, 10 insertions(+), 144 deletions(-)
Index: b/drivers/staging/rt2860/common/rtmp_init.c
===================================================================
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -1099,145 +1099,6 @@ NDIS_STATUS NICReadRegParameters(
========================================================================
*/
-#ifndef RT30xx
-VOID RTUSBFilterCalibration(
- IN PRTMP_ADAPTER pAd)
-{
- UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue;
- UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0;
- UCHAR RF_R24_Value = 0;
-
- // Give bbp filter initial value
- pAd->Mlme.CaliBW20RfR24 = 0x16;
- pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40
-
- do
- {
- if (loop == 1) //BandWidth = 40 MHz
- {
- // Write 0x27 to RF_R24 to program filter
- RF_R24_Value = 0x27;
- RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
- FilterTarget = 0x19;
-
- // when calibrate BW40, BBP mask must set to BW40.
- RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
- BBPValue&= (~0x18);
- BBPValue|= (0x10);
- RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
- }
- else //BandWidth = 20 MHz
- {
- // Write 0x07 to RF_R24 to program filter
- RF_R24_Value = 0x07;
- RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
- FilterTarget = 0x16;
- }
-
- // Write 0x01 to RF_R22 to enable baseband loopback mode
- RT30xxReadRFRegister(pAd, RF_R22, &value);
- value |= 0x01;
- RT30xxWriteRFRegister(pAd, RF_R22, value);
-
- // Write 0x00 to BBP_R24 to set power & frequency of passband test tone
- RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
- do
- {
- // Write 0x90 to BBP_R25 to transmit test tone
- RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
- RTMPusecDelay(1000);
- // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0]
- RTUSBReadBBPRegister(pAd, BBP_R55, &value);
- R55x = value & 0xFF;
-
- } while ((ReTry++ < 100) && (R55x == 0));
-
- // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone
- RTUSBWriteBBPRegister(pAd, BBP_R24, 0x06);
-
- while(TRUE)
- {
- // Write 0x90 to BBP_R25 to transmit test tone
- RTUSBWriteBBPRegister(pAd, BBP_R25, 0x90);
-
- //We need to wait for calibration
- RTMPusecDelay(1000);
- RTUSBReadBBPRegister(pAd, BBP_R55, &value);
- value &= 0xFF;
- if ((R55x - value) < FilterTarget)
- {
- RF_R24_Value ++;
- }
- else if ((R55x - value) == FilterTarget)
- {
- RF_R24_Value ++;
- count ++;
- }
- else
- {
- break;
- }
-
- // prevent infinite loop cause driver hang.
- if (loopcnt++ > 100)
- {
- DBGPRINT(RT_DEBUG_ERROR, ("RTUSBFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt));
- break;
- }
-
- // Write RF_R24 to program filter
- RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
- }
-
- if (count > 0)
- {
- RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0));
- }
-
- // Store for future usage
- if (loopcnt < 100)
- {
- if (loop++ == 0)
- {
- //BandWidth = 20 MHz
- pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value;
- }
- else
- {
- //BandWidth = 40 MHz
- pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value;
- break;
- }
- }
- else
- break;
-
- RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value);
-
- // reset count
- count = 0;
- } while(TRUE);
-
- //
- // Set back to initial state
- //
- RTUSBWriteBBPRegister(pAd, BBP_R24, 0);
-
- RT30xxReadRFRegister(pAd, RF_R22, &value);
- value &= ~(0x01);
- RT30xxWriteRFRegister(pAd, RF_R22, value);
-
- // set BBP back to BW20
- RTUSBReadBBPRegister(pAd, BBP_R4, &BBPValue);
- BBPValue&= (~0x18);
- RTUSBWriteBBPRegister(pAd, BBP_R4, BBPValue);
-
- DBGPRINT(RT_DEBUG_TRACE, ("RTUSBFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
-}
-#endif /* RT30xx */
-#ifdef RT30xx
VOID RTMPFilterCalibration(
IN PRTMP_ADAPTER pAd)
{
@@ -1246,9 +1107,13 @@ VOID RTMPFilterCalibration(
UCHAR RF_R24_Value = 0;
// Give bbp filter initial value
+#ifndef RT30xx
+ pAd->Mlme.CaliBW20RfR24 = 0x16;
+ pAd->Mlme.CaliBW40RfR24 = 0x36; //Bit[5] must be 1 for BW 40
+#else
pAd->Mlme.CaliBW20RfR24 = 0x1F;
pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40
-
+#endif
do
{
if (loop == 1) //BandWidth = 40 MHz
@@ -1266,11 +1131,12 @@ VOID RTMPFilterCalibration(
BBPValue&= (~0x18);
BBPValue|= (0x10);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
-
+#ifdef RT30xx
// set to BW40
RT30xxReadRFRegister(pAd, RF_R31, &value);
value |= 0x20;
RT30xxWriteRFRegister(pAd, RF_R31, value);
+#endif
}
else //BandWidth = 20 MHz
{
@@ -1281,11 +1147,12 @@ VOID RTMPFilterCalibration(
FilterTarget = 0x13;
else
FilterTarget = 0x16;
-
+#ifdef RT30xx
// set to BW20
RT30xxReadRFRegister(pAd, RF_R31, &value);
value &= (~0x20);
RT30xxWriteRFRegister(pAd, RF_R31, value);
+#endif
}
// Write 0x01 to RF_R22 to enable baseband loopback mode
@@ -1390,7 +1257,6 @@ VOID RTMPFilterCalibration(
DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24));
}
-#endif /* RT30xx */
VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd)
{
@@ -1417,7 +1283,7 @@ VOID NICInitRT30xxRFRegisters(IN PRTMP_A
}
//For RF filter Calibration
- RTUSBFilterCalibration(pAd);
+ RTMPFilterCalibration(pAd);
}
#endif
#ifdef RT30xx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists