linux-kernel - Re: e1000e: why does pci_enable_pcie_error

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <4A8E01AE.5070900@redhat.com>
Date:	Fri, 21 Aug 2009 10:08:46 +0800
From:	Danny Feng <dfeng@...hat.com>
To:	Frans Pop <elendil@...net.nl>
CC:	Netdev <netdev@...r.kernel.org>, linux-kernel@...r.kernel.org,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: Re: e1000e: why does pci_enable_pcie_error_reporting() fail on my
 hp2510p?

On 08/20/2009 11:14 PM, Frans Pop wrote:
> With the current kernel I suddenly get the following error displayed
> during boot:
>    e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>    e1000e: Copyright (c) 1999-2008 Intel Corporation.
>    e1000e 0000:00:19.0: PCI INT A ->  GSI 22 (level, low) ->  IRQ 22
> ! e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
>    e1000e 0000:00:19.0: setting latency timer to 64
>    e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
>
> This looks to be the consequence of:
> commit 68eac4602b9104cdaa6c18b3edd914cececa6a1e
> Author: Xiaotian Feng<dfeng@...hat.com>
> Date:   Fri Aug 14 14:35:52 2009 +0000
>      e1000e: fix use of pci_enable_pcie_error_reporting
>
> Looking at the change it seems logical that this error, that I previously
> only saw during resumes from suppend to RAM, now also shows up during
> system boot. So I don't think it can be qualified as a regression, but it
> is certainly rather annoying.
>
> Questions:
> - is it possible that the error occurs due to a kernel bug, or is this
>    certain to be due to broken hardware?
I think this messages comes from hardware does not support pcie aer.
In fact the messages is not fatal and can be ignored. Some drivers
is silence with pci_enable_pcie_error_reporting ....

My patch is just to fix the logic of pcie aer usage ...
> - as the error is non-fatal, should it maybe be changed from dev_err
>    to dev_info, so that at least it does not show up during a boot
>    with 'quiet'?
I agree with this.... Maybe some of other drivers needs this too 
(igb,ixgbe)...
> - if broken hardware is common, should the kernel complain at all,
>    or at least maybe show a slightly "friendlier" message?
>
> System: hp2510p (ICH8, Core2 Duo) running x86_64, Debian stable ("Lenny")
>
> 00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM
>          Gigabit Network Connection [8086:1049] (rev 03)
>      Subsystem: Hewlett-Packard Company Device 30c9
>      Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>      Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-<TAbort-<MAbort->SERR-<PERR- INTx-
>      Latency: 0
>      Interrupt: pin A routed to IRQ 26
>      Region 0: Memory at e0620000 (32-bit, non-prefetchable) [size=128K]
>      Region 1: Memory at e0640000 (32-bit, non-prefetchable) [size=4K]
>      Region 2: I/O ports at 2060 [size=32]
>      Capabilities: [c8] Power Management version 2
>              Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>              Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>      Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
>              Address: 00000000fee0300c  Data: 41b1
>      Kernel driver in use: e1000e
>      Kernel modules: e1000e
>
> I can provide full dmesg and kernel config if desired.
>
> Cheers,
> FJP
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/