| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 27 Aug 2009 18:28:58 +0200 From: Volker Armin Hemmann <volkerarmin@...glemail.com> To: Yinghai Lu <yhlu.kernel@...il.com>, linux-kernel@...r.kernel.org Subject: Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier. On Donnerstag 27 August 2009, you wrote: > On Wed, Aug 26, 2009 at 6:13 PM, Volker Armin > > Hemmann<volkerarmin@...glemail.com> wrote: > > Hi, > > > > On Sonntag 23 August 2009, Yinghai Lu wrote: > >> On Sat, Aug 22, 2009 at 12:26 PM, Volker Armin > >> > >> Hemmann<volkerarmin@...glemail.com> wrote: > >> > when I went from 4gb to 6gb I had a performance degradation. Since the > >> > 8gb are faster and the new cpu is faster, I don't see degradation. But > >> > I wonder how much better performance could be with 'correct' mtrr. > >> > >> that is weird. with 4g should have mem hole remapping. > >> > >> do you still have /proc/mtrr for 6g setup? > >> > >> YH > > > > some more information, mtrr of 8gb with my X2 6000: > > > > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back > > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back > > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back > > reg03: base=0x0c8000000 ( 3200MB), size= 64MB, count=1: write-back > > reg04: base=0x0cc000000 ( 3264MB), size= 32MB, count=1: write-back > > reg05: base=0x0ce000000 ( 3296MB), size= 16MB, count=1: write-back > > > > from June with 2.6.30, dmesg from that incident is attached > > > > compared that with the mtrr with my X4: > > > > reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back > > reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back > > reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back > > > > > > just ignore the fgrlx parts - whenever I checked it did not made a > > difference if X was started or not. > > theo one with X4, you got extra device > > [ 0.383812] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff] > [ 0.383828] pci 0000:03:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff] > [ 0.383844] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff] > [ 0.383878] pci 0000:03:00.0: supports D1 D2 > [ 0.383879] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold > [ 0.383916] pci 0000:03:00.0: PME# disabled > > so BIOS allocate more mmio space for it. > > YH that card is (as far as I can see) an additional networking card from realtek I put into the pcie1x slot. On the other hand I also removed a scsi card in the mean time. I removed that card: cat /proc/mtrr reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back dmesg [ 0.000000] Linux version 2.6.30.5r4 (root@...rgy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009 [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7eb0000 page 4k [ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000 [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7ec0000 00040 [ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001575998] TEXT DATA BSS ==> [0001000000 - 0001575998] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0001576000 - 0001576133] BRK ==> [0001576000 - 0001576133] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffe20000000000-ffffe20007dfffff] PMD -> [ffff880028200000- ffff88002fffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7eb0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000 [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c7f00000:38000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages at ffff880028034000, static data 67808 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793 [ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:384 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3200.022 MHz processor. [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.003333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003333] Checking aperture... [ 0.003333] No AGP bridge found [ 0.003333] Node 0: aperture @ 2242000000 size 32 MB [ 0.003333] Aperture beyond 4GB. Ignoring. [ 0.003333] Your BIOS doesn't leave a aperture memory hole [ 0.003333] Please enable the IOMMU option in the BIOS setup [ 0.003333] This costs you 64 MB of RAM [ 0.003333] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.003333] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.003333] Memory: 8172700k/9306112k available (3231k kernel code, 919300k absent, 213188k reserved, 1310k data, 348k init) [ 0.003333] hpet clockevent registered [ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6402.70 BogoMIPS (lpj=10666726) [ 0.003444] Mount-cache hash table entries: 256 [ 0.003563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003598] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003632] tseg: 0000000000 [ 0.003638] CPU: Physical Processor ID: 0 [ 0.003671] CPU: Processor Core ID: 0 [ 0.003709] using C1E aware idle routine [ 0.003752] ACPI: Core revision 20090320 [ 0.016701] Setting APIC routing to flat [ 0.017037] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050747] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666968) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.144204] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.144516] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146715] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666966) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.240831] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.241143] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.243382] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6402.86 BogoMIPS (lpj=10666977) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.337458] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.337769] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340014] Brought up 4 CPUs [ 0.340048] Total of 4 processors activated (25610.27 BogoMIPS). [ 0.340314] net_namespace: 1400 bytes [ 0.340417] xor: automatically using best checksumming function: generic_sse [ 0.356667] generic_sse: 12783.600 MB/sec [ 0.356701] xor: using function: generic_sse (12783.600 MB/sec) [ 0.356754] Time: 18:24:15 Date: 08/27/09 [ 0.356837] NET: Registered protocol family 16 [ 0.357042] node 0 link 0: io port [1000, ffffff] [ 0.357044] TOM: 00000000c8000000 aka 3200M [ 0.357078] Fam 10h mmconf [e0000000, efffffff] [ 0.357080] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.357082] node 0 link 0: mmio [f0000000, ffffffff] [ 0.357084] node 0 link 0: mmio [a0000, bffff] [ 0.357085] node 0 link 0: mmio [c8000000, dfffffff] [ 0.357087] TOM2: 0000000238000000 aka 9088M [ 0.357120] bus: [00,07] on node 0 link 0 [ 0.357122] bus: 00 index 0 io port: [0, ffff] [ 0.357123] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.357124] bus: 00 index 2 mmio: [a0000, bffff] [ 0.357125] bus: 00 index 3 mmio: [c8000000, dfffffff] [ 0.357126] bus: 00 index 4 mmio: [238000000, fcffffffff] [ 0.357133] ACPI: bus type pci registered [ 0.357236] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.357271] PCI: Not using MMCONFIG. [ 0.357305] PCI: Using configuration type 1 for base access [ 0.357338] PCI: Using configuration type 1 for extended access [ 0.358956] bio: create slab <bio-0> at 0 [ 0.359399] ACPI: EC: Look up EC in DSDT [ 0.367245] ACPI: Interpreter enabled [ 0.367280] ACPI: (supports S0 S1 S3 S4 S5) [ 0.367395] ACPI: Using IOAPIC for interrupt routing [ 0.367473] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.370672] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.375800] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.381629] ACPI: No dock devices found. [ 0.381855] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.381960] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.382006] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.382041] pci 0000:00:02.0: PME# disabled [ 0.382108] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.382143] pci 0000:00:09.0: PME# disabled [ 0.382688] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.382723] pci 0000:00:0a.0: PME# disabled [ 0.382801] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007] [ 0.382807] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003] [ 0.382813] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007] [ 0.382818] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003] [ 0.382824] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] [ 0.382830] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff] [ 0.382879] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff] [ 0.382930] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff] [ 0.382998] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.383047] pci 0000:00:12.2: supports D1 D2 [ 0.383049] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.383085] pci 0000:00:12.2: PME# disabled [ 0.383146] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff] [ 0.383197] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff] [ 0.383266] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff] [ 0.383315] pci 0000:00:13.2: supports D1 D2 [ 0.383316] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.383336] pci 0000:00:13.2: PME# disabled [ 0.383478] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.383484] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.383490] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.383495] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.383501] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.383626] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff] [ 0.383760] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.383767] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.383771] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.383778] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.383794] pci 0000:02:00.0: supports D1 D2 [ 0.383821] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff] [ 0.383852] pci 0000:02:00.1: supports D1 D2 [ 0.383901] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.383903] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.383906] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.383948] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.383950] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.383953] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff] [ 0.383984] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff] [ 0.383997] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff] [ 0.384007] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff] [ 0.384012] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.384039] pci 0000:01:00.0: supports D1 D2 [ 0.384040] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.384077] pci 0000:01:00.0: PME# disabled [ 0.384162] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff] [ 0.384164] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.384167] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.384201] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff] [ 0.384282] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f] [ 0.384339] pci 0000:05:08.0: supports D1 D2 [ 0.384381] pci 0000:00:14.4: transparent bridge [ 0.384417] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.384423] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff] [ 0.384435] pci_bus 0000:00: on NUMA node 0 [ 0.384439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.384573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.384617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.384661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.384723] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.387558] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.387802] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.388043] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.388284] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.388525] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.388812] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.389052] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.389281] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.389666] SCSI subsystem initialized [ 0.389752] libata version 3.00 loaded. [ 0.389823] usbcore: registered new interface driver usbfs [ 0.389879] usbcore: registered new interface driver hub [ 0.389943] usbcore: registered new device driver usb [ 0.446679] raid6: int64x1 2811 MB/s [ 0.503351] raid6: int64x2 3615 MB/s [ 0.560018] raid6: int64x4 2850 MB/s [ 0.616675] raid6: int64x8 2698 MB/s [ 0.673347] raid6: sse2x1 4188 MB/s [ 0.730011] raid6: sse2x2 7192 MB/s [ 0.786667] raid6: sse2x4 7958 MB/s [ 0.786701] raid6: using algorithm sse2x4 (7958 MB/s) [ 0.786782] PCI: Using ACPI for IRQ routing [ 0.786821] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.800181] PCI-DMA: Disabling AGP. [ 0.800296] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.800330] PCI-DMA: using GART IOMMU. [ 0.800365] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.802132] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.802239] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.806694] hpet: hpet2 irq 24 for MSI [ 0.816683] Switched to high resolution mode on CPU 0 [ 0.817794] Switched to high resolution mode on CPU 3 [ 0.817836] Switched to high resolution mode on CPU 2 [ 0.817876] Switched to high resolution mode on CPU 1 [ 0.826699] pnp: PnP ACPI init [ 0.826750] ACPI: bus type pnp registered [ 0.829210] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829264] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829318] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829372] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.829725] pnp: PnP ACPI: found 12 devices [ 0.829758] ACPI: ACPI bus type pnp unregistered [ 0.829798] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.829851] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.829888] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.829923] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.829957] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.830008] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.830043] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.830077] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.830112] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.830146] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.830181] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.830215] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.830250] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.830284] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.830318] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.830353] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.830387] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.830422] system 00:07: ioport range 0xb00-0xb0f has been reserved [ 0.830456] system 00:07: ioport range 0xb20-0xb3f has been reserved [ 0.830490] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.830525] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.830559] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.830594] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.830629] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.830666] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.830701] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.830738] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.835626] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.835661] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.835696] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.835731] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.835786] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.835820] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.835855] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff [ 0.835890] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.835944] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.835978] pci 0000:00:0a.0: IO window: 0xb000-0xbfff [ 0.836013] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.836048] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.836102] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.836138] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.836175] pci 0000:00:14.4: MEM window: disabled [ 0.836210] pci 0000:00:14.4: PREFETCH window: 0x000000fcf00000-0x000000fcffffff [ 0.836273] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.836309] pci 0000:00:02.0: setting latency timer to 64 [ 0.836315] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.836350] pci 0000:00:09.0: setting latency timer to 64 [ 0.836353] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.836388] pci 0000:00:0a.0: setting latency timer to 64 [ 0.836395] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.836397] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.836398] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.836400] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.836401] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.836403] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.836404] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.836405] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff] [ 0.836407] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.836408] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.836409] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.836411] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.836412] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff] [ 0.836413] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.836415] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.836469] NET: Registered protocol family 2 [ 0.873408] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.873917] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.874894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.875291] TCP: Hash tables configured (established 262144 bind 65536) [ 0.875325] TCP reno registered [ 0.883426] NET: Registered protocol family 1 [ 0.885125] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.885267] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.885403] msgmni has been set to 15964 [ 0.885670] alg: No test for stdrng (krng) [ 0.885707] async_tx: api initialized (sync-only) [ 0.885786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.885840] io scheduler noop registered [ 0.885883] io scheduler cfq registered (default) [ 0.886008] pci 0000:02:00.0: Boot video device [ 0.886105] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.886112] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.886203] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.886209] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.886296] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 0.886303] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.886520] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.886573] ACPI: Power Button [PWRF] [ 0.886654] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.886726] ACPI: Power Button [PWRB] [ 0.886869] processor ACPI_CPU:00: registered as cooling_device0 [ 0.886904] ACPI: Processor [P001] (supports 8 throttling states) [ 0.886999] processor ACPI_CPU:01: registered as cooling_device1 [ 0.887067] processor ACPI_CPU:02: registered as cooling_device2 [ 0.887135] processor ACPI_CPU:03: registered as cooling_device3 [ 0.890986] Linux agpgart interface v0.103 [ 0.891109] Driver 'sd' needs updating - please use bus_type methods [ 0.891192] ahci 0000:00:11.0: version 3.0 [ 0.891204] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.891348] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.891402] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.891917] scsi0 : ahci [ 0.892050] scsi1 : ahci [ 0.892140] scsi2 : ahci [ 0.892229] scsi3 : ahci [ 0.892316] scsi4 : ahci [ 0.892406] scsi5 : ahci [ 0.892531] ata1: SATA max UDMA/133 irq 22, PHY RDY changed [ 0.892566] ata2: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddff980 irq 22 [ 0.892620] ata3: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa00 irq 22 [ 0.892674] ata4: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa80 irq 22 [ 0.892727] ata5: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb00 irq 22 [ 0.892781] ata6: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb80 irq 22 [ 0.893026] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.893060] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.893677] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.893757] mice: PS/2 mouse device common for all mice [ 0.893879] rtc_cmos 00:02: RTC can wake from S4 [ 0.893944] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.894000] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.894054] md: raid1 personality registered for level 1 [ 0.894088] md: raid6 personality registered for level 6 [ 0.894122] md: raid5 personality registered for level 5 [ 0.894156] md: raid4 personality registered for level 4 [ 0.894258] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@...hat.com [ 0.894351] cpuidle: using governor ladder [ 0.894476] usbcore: registered new interface driver hiddev [ 0.894530] usbcore: registered new interface driver usbhid [ 0.894563] usbhid: v2.6:USB HID core driver [ 0.894637] TCP cubic registered [ 0.894670] NET: Registered protocol family 17 [ 0.894732] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 0.894809] powernow-k8: 0 : pstate 0 (3200 MHz) [ 0.894843] powernow-k8: 1 : pstate 1 (2500 MHz) [ 0.895361] powernow-k8: 2 : pstate 2 (2100 MHz) [ 0.895395] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.895799] PM: Resume from disk failed. [ 0.895891] Magic number: 5:326:444 [ 0.921708] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.210865] ata6: SATA link down (SStatus 0 SControl 300) [ 1.210924] ata5: SATA link down (SStatus 0 SControl 300) [ 1.210981] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.211036] ata3: SATA link down (SStatus 0 SControl 300) [ 1.211091] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.217322] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.217368] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.217434] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.217473] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.223837] ata2.00: configured for UDMA/133 [ 1.223889] ata4.00: configured for UDMA/133 [ 1.610866] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.617207] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.617243] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.623662] ata1.00: configured for UDMA/133 [ 1.637999] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.638193] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.638294] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1.638328] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.638411] sd 0:0:0:0: [sda] Write Protect is off [ 1.638446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.638456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638461] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 1.638468] sd 1:0:0:0: [sdb] Write Protect is off [ 1.638469] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.638478] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638516] sdb:<5>sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.638614] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.638731] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.638752] sd 3:0:0:0: [sdc] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 1.638760] sd 3:0:0:0: [sdc] Write Protect is off [ 1.638762] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.638770] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.638811] sdc:<6> sda: sdc1 sdc2 sdc3 sdc4 < sdb1 sdb2 sdb3 sdb4 < sda1 sda2 sda3 sda4 < sdb5 sdc5 sda5 sdc6 sdb6 > [ 1.660703] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.667600] sda6 > [ 1.667894] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.671362] sdc7 > [ 1.671684] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.671725] md: Waiting for all devices to be available before autodetect [ 1.671759] md: If you don't use raid, use raid=noautodetect [ 1.671861] md: Autodetecting RAID arrays. [ 1.769826] md: Scanned 12 and added 12 devices. [ 1.769861] md: autorun ... [ 1.769894] md: considering sdc6 ... [ 1.769931] md: adding sdc6 ... [ 1.769965] md: sdc5 has different UUID to sdc6 [ 1.769999] md: sdc3 has different UUID to sdc6 [ 1.770035] md: sdc1 has different UUID to sdc6 [ 1.770070] md: adding sda6 ... [ 1.770104] md: sda5 has different UUID to sdc6 [ 1.770138] md: sda3 has different UUID to sdc6 [ 1.770172] md: sda1 has different UUID to sdc6 [ 1.770207] md: adding sdb6 ... [ 1.770241] md: sdb5 has different UUID to sdc6 [ 1.770275] md: sdb3 has different UUID to sdc6 [ 1.770309] md: sdb1 has different UUID to sdc6 [ 1.770429] md: created md3 [ 1.770462] md: bind<sdb6> [ 1.770500] md: bind<sda6> [ 1.770536] md: bind<sdc6> [ 1.770572] md: running: <sdc6><sda6><sdb6> [ 1.770708] raid5: device sdc6 operational as raid disk 2 [ 1.770742] raid5: device sda6 operational as raid disk 0 [ 1.770776] raid5: device sdb6 operational as raid disk 1 [ 1.770968] raid5: allocated 3220kB for md3 [ 1.771021] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 [ 1.771071] RAID5 conf printout: [ 1.771104] --- rd:3 wd:3 [ 1.771137] disk 0, o:1, dev:sda6 [ 1.771170] disk 1, o:1, dev:sdb6 [ 1.771203] disk 2, o:1, dev:sdc6 [ 1.771288] md: considering sdc5 ... [ 1.771324] md: adding sdc5 ... [ 1.771358] md: sdc3 has different UUID to sdc5 [ 1.771392] md: sdc1 has different UUID to sdc5 [ 1.771427] md: adding sda5 ... [ 1.771460] md: sda3 has different UUID to sdc5 [ 1.771494] md: sda1 has different UUID to sdc5 [ 1.771529] md: adding sdb5 ... [ 1.771563] md: sdb3 has different UUID to sdc5 [ 1.771597] md: sdb1 has different UUID to sdc5 [ 1.771688] md: created md2 [ 1.771721] md: bind<sdb5> [ 1.771758] md: bind<sda5> [ 1.771794] md: bind<sdc5> [ 1.771830] md: running: <sdc5><sda5><sdb5> [ 1.771964] raid5: device sdc5 operational as raid disk 2 [ 1.771998] raid5: device sda5 operational as raid disk 0 [ 1.772031] raid5: device sdb5 operational as raid disk 1 [ 1.772220] raid5: allocated 3220kB for md2 [ 1.772266] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 [ 1.772318] RAID5 conf printout: [ 1.772351] --- rd:3 wd:3 [ 1.772384] disk 0, o:1, dev:sda5 [ 1.772417] disk 1, o:1, dev:sdb5 [ 1.772450] disk 2, o:1, dev:sdc5 [ 1.772520] md: considering sdc3 ... [ 1.772556] md: adding sdc3 ... [ 1.772590] md: sdc1 has different UUID to sdc3 [ 1.772624] md: adding sda3 ... [ 1.772658] md: sda1 has different UUID to sdc3 [ 1.772693] md: adding sdb3 ... [ 1.772727] md: sdb1 has different UUID to sdc3 [ 1.772819] md: created md1 [ 1.772852] md: bind<sdb3> [ 1.772888] md: bind<sda3> [ 1.772924] md: bind<sdc3> [ 1.772960] md: running: <sdc3><sda3><sdb3> [ 1.773090] raid5: device sdc3 operational as raid disk 2 [ 1.773124] raid5: device sda3 operational as raid disk 0 [ 1.773157] raid5: device sdb3 operational as raid disk 1 [ 1.773353] raid5: allocated 3220kB for md1 [ 1.773403] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 1.773452] RAID5 conf printout: [ 1.773485] --- rd:3 wd:3 [ 1.773518] disk 0, o:1, dev:sda3 [ 1.773551] disk 1, o:1, dev:sdb3 [ 1.773584] disk 2, o:1, dev:sdc3 [ 1.773660] md: considering sdc1 ... [ 1.773695] md: adding sdc1 ... [ 1.773730] md: adding sda1 ... [ 1.773764] md: adding sdb1 ... [ 1.773797] md: created md0 [ 1.773829] md: bind<sdb1> [ 1.773866] md: bind<sda1> [ 1.773902] md: bind<sdc1> [ 1.773938] md: running: <sdc1><sda1><sdb1> [ 1.774092] raid1: raid set md0 active with 3 out of 3 mirrors [ 1.774152] md: ... autorun DONE. [ 1.774200] md: Loading md3: /dev/sda3 [ 1.774239] md3: unknown partition table [ 1.774396] md: couldn't update array info. -22 [ 1.774433] md: could not bd_claim sda3. [ 1.774467] md: md_import_device returned -16 [ 1.774502] md: could not bd_claim sdb3. [ 1.774535] md: md_import_device returned -16 [ 1.774570] md: could not bd_claim sdc3. [ 1.774617] md: md_import_device returned -16 [ 1.774651] md: starting md3 failed [ 1.774725] md1: unknown partition table [ 1.821104] reiser4: md1: found disk format 4.0.0. [ 5.827803] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1. [ 5.827853] Freeing unused kernel memory: 348k freed [ 8.934542] udev: starting version 145 [ 9.053004] md0:<6> md2: unknown partition table [ 9.113192] unknown partition table [ 10.041736] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.041750] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.041762] r8169 0000:01:00.0: setting latency timer to 64 [ 10.042017] r8169 0000:01:00.0: irq 28 for MSI/MSI-X [ 10.042095] eth0: RTL8168c/8111c at 0xffffc20012efa000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28 [ 10.070654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.070677] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.070710] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 10.070949] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 10.070973] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 10.070989] ehci_hcd 0000:00:12.2: debug port 1 [ 10.071005] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 10.081262] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 10.081288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.081290] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.081291] usb usb1: Product: EHCI Host Controller [ 10.081292] usb usb1: Manufacturer: Linux 2.6.30.5r4 ehci_hcd [ 10.081294] usb usb1: SerialNumber: 0000:00:12.2 [ 10.081640] usb usb1: configuration #1 chosen from 1 choice [ 10.081682] hub 1-0:1.0: USB hub found [ 10.081687] hub 1-0:1.0: 6 ports detected [ 10.081811] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.081826] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 10.081990] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 10.082007] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 10.082023] ehci_hcd 0000:00:13.2: debug port 1 [ 10.082036] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 10.091264] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 10.091276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.091277] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.091279] usb usb2: Product: EHCI Host Controller [ 10.091280] usb usb2: Manufacturer: Linux 2.6.30.5r4 ehci_hcd [ 10.091281] usb usb2: SerialNumber: 0000:00:13.2 [ 10.091348] usb usb2: configuration #1 chosen from 1 choice [ 10.091377] hub 2-0:1.0: USB hub found [ 10.091381] hub 2-0:1.0: 6 ports detected [ 10.120081] Linux video capture interface: v2.00 [ 10.128288] bttv: driver version 0.9.18 loaded [ 10.128290] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 10.128348] bttv: Bt8xx card found (0). [ 10.128359] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 10.128369] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000 [ 10.128411] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 10.128413] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.128447] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 10.387101] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 10.512120] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 10.512122] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.512124] usb 1-2: Product: USB2.0 Hub [ 10.512170] usb 1-2: configuration #1 chosen from 1 choice [ 10.512613] hub 1-2:1.0: USB hub found [ 10.512866] hub 1-2:1.0: 4 ports detected [ 10.781873] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 10.871357] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 10.871358] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.871360] usb 1-2.2: Product: USB Receiver [ 10.871361] usb 1-2.2: Manufacturer: Logitech [ 10.871391] usb 1-2.2: configuration #1 chosen from 1 choice [ 10.881593] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 10.881630] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 10.887013] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4 [ 10.887061] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 11.130018] bttv0: tea5757: read timeout [ 11.130020] bttv0: tuner type=5 [ 11.148620] All bytes are equal. It is not a TEA5767 [ 11.148649] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 11.151481] tuner-simple 0-0060: creating new instance [ 11.151484] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 11.163632] bttv0: audio absent, no audio device found! [ 11.163694] bttv0: registered device video0 [ 11.163721] bttv0: registered device vbi0 [ 11.491112] reiser4: md2: found disk format 4.0.0. [ 13.287507] reiser4: md3: found disk format 4.0.0. [ 54.579781] reiser4: sdc7: found disk format 4.0.0. [ 66.925455] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 66.968051] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 67.009103] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k [ 67.688099] w83627ehf: Found W83627EHG chip at 0x290 [ 68.078974] r8169: eth0: link up [ 68.078984] r8169: eth0: link up [ 70.853121] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) - > IRQ 23 [ 70.860129] Audigy2 value: Special config. [ 72.279621] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 72.279629] Disabling lock debugging due to kernel taint [ 72.328125] [fglrx] Maximum main memory to use for locked dma buffers: 7749 MBytes. [ 72.328388] [fglrx] vendor: 1002 device: 9501 count: 1 [ 72.329030] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 72.329052] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 72.329061] pci 0000:02:00.0: setting latency timer to 64 [ 72.329531] [fglrx] Kernel PAT support is enabled [ 72.329567] [fglrx] module loaded - fglrx 8.66.2 [Aug 25 2009] with 1 minors [ 72.502484] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X [ 72.502838] [fglrx] Firegl kernel thread PID: 3735 [ 74.588819] [fglrx] Gart USWC size:1279 M. [ 74.588822] [fglrx] Gart cacheable size:508 M. [ 74.588826] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 74.588827] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000 [ 74.588829] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 132.415785] reiser4[kmail(3916)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 132.415790] NOTICE: md3 does not support write barriers, using synchronous write instead. same result. Glück Auf, Volker ps. putting back the scsi card would be difficult - so if it is not really needed I would prefer to skip that step. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists