| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200909192211.12226.volkerarmin@googlemail.com> Date: Sat, 19 Sep 2009 22:11:12 +0200 From: Volker Armin Hemmann <volkerarmin@...glemail.com> To: Yinghai Lu <yhlu.kernel@...il.com> Cc: linux-kernel@...r.kernel.org Subject: Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier. Hi, just want to say: no change with 2.6.31. [ 0.000000] Linux version 2.6.31r4 (root@...rgy) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #9 SMP Wed Sep 16 15:10:44 CEST 2009 [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000238000000 aka 9088M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7eb0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7eb0000 (usable) [ 0.000000] modified: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data) [ 0.000000] modified: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS) [ 0.000000] modified: 00000000c7ef0000 - 00000000c7f00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7eb0000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00c7e00000 page 2M [ 0.000000] 00c7e00000 - 00c7eb0000 page 4k [ 0.000000] kernel direct mapping tables up to c7eb0000 @ 10000-13000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000 [ 0.000000] ACPI: RSDP 00000000000fa7c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7eb0000 00040 (v01 050609 RSDT2000 20090506 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7eb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7eb0440 08512 (v01 AS140 AS140121 00000121 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7ec0000 00040 [ 0.000000] ACPI: APIC 00000000c7eb0390 0006C (v01 050609 APIC2000 20090506 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7eb0400 0003C (v01 050609 OEMMCFG 20090506 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7ec0040 00071 (v01 050609 OEMB2000 20090506 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c7eb8960 00027 (v01 050609 OEMAAFT 20090506 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c7eb8990 00038 (v01 050609 OEMHPET 20090506 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7eb89d0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00015f68c0] TEXT DATA BSS ==> [0001000000 - 00015f68c0] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [00015f7000 - 00015f7133] BRK ==> [00015f7000 - 00015f7133] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000- ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7eb0 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2096703 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 800488 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000c7eb0000 - 00000000c7ec0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ec0000 - 00000000c7ef0000 [ 0.000000] PM: Registered nosave memory: 00000000c7ef0000 - 00000000c7f00000 [ 0.000000] PM: Registered nosave memory: 00000000c7f00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c7f00000 (gap: c7f00000:38000000) [ 0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880028034000, static data 71904 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064793 [ 0.000000] Kernel command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3 nmi_watchdog=0 mtrr_spare_reg_nr=1 [ 0.000000] md: Will configure md3 (super-block) from /dev/sda3,/dev/sdb3,/dev/sdc3, below. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 200000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8184476k/9306112k available (3489k kernel code, 919300k absent, 201360k reserved, 1745k data, 376k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3200.248 MHz processor. [ 0.000613] Console: colour VGA+ 80x25 [ 0.000615] console [tty0] enabled [ 0.003333] hpet clockevent registered [ 0.003333] alloc irq_desc for 24 on node 0 [ 0.003333] alloc kstat_irqs on node 0 [ 0.003333] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 6403.17 BogoMIPS (lpj=10667480) [ 0.003420] Mount-cache hash table entries: 256 [ 0.003542] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003577] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003612] tseg: 0000000000 [ 0.003617] CPU: Physical Processor ID: 0 [ 0.003651] CPU: Processor Core ID: 0 [ 0.003685] mce: CPU supports 6 MCE banks [ 0.003725] using C1E aware idle routine [ 0.003769] ACPI: Core revision 20090521 [ 0.016708] Setting APIC routing to flat [ 0.017031] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.050991] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.053332] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 6402.86 BogoMIPS (lpj=10666976) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.144164] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.144513] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.146698] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.003333] Initializing CPU#2 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666966) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 2 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.240840] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.241187] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.243371] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.003333] Initializing CPU#3 [ 0.003333] Calibrating delay using timer specific routine.. 6402.85 BogoMIPS (lpj=10666969) [ 0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.003333] CPU: L2 Cache: 512K (64 bytes/line) [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 3 [ 0.003333] mce: CPU supports 6 MCE banks [ 0.003333] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.337520] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02 [ 0.337868] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.340008] Brought up 4 CPUs [ 0.340042] Total of 4 processors activated (25611.74 BogoMIPS). [ 0.340111] CPU0 attaching sched-domain: [ 0.340112] domain 0: span 0-3 level MC [ 0.340114] groups: 0 1 2 3 [ 0.340117] CPU1 attaching sched-domain: [ 0.340118] domain 0: span 0-3 level MC [ 0.340119] groups: 1 2 3 0 [ 0.340122] CPU2 attaching sched-domain: [ 0.340123] domain 0: span 0-3 level MC [ 0.340124] groups: 2 3 0 1 [ 0.340126] CPU3 attaching sched-domain: [ 0.340127] domain 0: span 0-3 level MC [ 0.340128] groups: 3 0 1 2 [ 0.340392] xor: automatically using best checksumming function: generic_sse [ 0.356667] generic_sse: 12835.200 MB/sec [ 0.356701] xor: using function: generic_sse (12835.200 MB/sec) [ 0.356754] Time: 10:44:48 Date: 09/18/09 [ 0.356803] NET: Registered protocol family 16 [ 0.357121] node 0 link 0: io port [1000, ffffff] [ 0.357123] TOM: 00000000c8000000 aka 3200M [ 0.357157] Fam 10h mmconf [e0000000, efffffff] [ 0.357159] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.357161] node 0 link 0: mmio [f0000000, ffffffff] [ 0.357163] node 0 link 0: mmio [a0000, bffff] [ 0.357165] node 0 link 0: mmio [c8000000, dfffffff] [ 0.357166] TOM2: 0000000238000000 aka 9088M [ 0.357200] bus: [00,07] on node 0 link 0 [ 0.357201] bus: 00 index 0 io port: [0, ffff] [ 0.357203] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.357204] bus: 00 index 2 mmio: [a0000, bffff] [ 0.357205] bus: 00 index 3 mmio: [c8000000, dfffffff] [ 0.357206] bus: 00 index 4 mmio: [238000000, fcffffffff] [ 0.357219] ACPI: bus type pci registered [ 0.357325] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.357360] PCI: Not using MMCONFIG. [ 0.357394] PCI: Using configuration type 1 for base access [ 0.357428] PCI: Using configuration type 1 for extended access [ 0.359473] bio: create slab <bio-0> at 0 [ 0.359916] ACPI: EC: Look up EC in DSDT [ 0.367314] ACPI: Interpreter enabled [ 0.367350] ACPI: (supports S0 S1 S3 S4 S5) [ 0.367940] ACPI: Using IOAPIC for interrupt routing [ 0.368011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.370718] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.375825] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.381085] ACPI: No dock devices found. [ 0.381379] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.381460] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.381506] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.381541] pci 0000:00:02.0: PME# disabled [ 0.381609] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.381644] pci 0000:00:09.0: PME# disabled [ 0.381704] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.381739] pci 0000:00:0a.0: PME# disabled [ 0.381818] pci 0000:00:11.0: reg 10 io port: [0xa000-0xa007] [ 0.381824] pci 0000:00:11.0: reg 14 io port: [0x9000-0x9003] [ 0.381830] pci 0000:00:11.0: reg 18 io port: [0x8000-0x8007] [ 0.381836] pci 0000:00:11.0: reg 1c io port: [0x7000-0x7003] [ 0.381842] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] [ 0.381848] pci 0000:00:11.0: reg 24 32bit mmio: [0xfddff800-0xfddffbff] [ 0.381897] pci 0000:00:12.0: reg 10 32bit mmio: [0xfddfe000-0xfddfefff] [ 0.381948] pci 0000:00:12.1: reg 10 32bit mmio: [0xfddfd000-0xfddfdfff] [ 0.382016] pci 0000:00:12.2: reg 10 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.382065] pci 0000:00:12.2: supports D1 D2 [ 0.382067] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.382103] pci 0000:00:12.2: PME# disabled [ 0.382165] pci 0000:00:13.0: reg 10 32bit mmio: [0xfddfc000-0xfddfcfff] [ 0.382216] pci 0000:00:13.1: reg 10 32bit mmio: [0xfddf7000-0xfddf7fff] [ 0.382284] pci 0000:00:13.2: reg 10 32bit mmio: [0xfddf6800-0xfddf68ff] [ 0.382334] pci 0000:00:13.2: supports D1 D2 [ 0.382335] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.382371] pci 0000:00:13.2: PME# disabled [ 0.382514] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.382519] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.382525] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.382531] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.382536] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.382660] pci 0000:00:14.5: reg 10 32bit mmio: [0xfddf5000-0xfddf5fff] [ 0.382794] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.382801] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdff0000-0xfdffffff] [ 0.382806] pci 0000:02:00.0: reg 20 io port: [0xc000-0xc0ff] [ 0.382813] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] [ 0.382829] pci 0000:02:00.0: supports D1 D2 [ 0.382857] pci 0000:02:00.1: reg 10 64bit mmio: [0xfdfec000-0xfdfeffff] [ 0.382887] pci 0000:02:00.1: supports D1 D2 [ 0.382937] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.382939] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.382943] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.382985] pci 0000:00:09.0: bridge io port: [0xd000-0xdfff] [ 0.382987] pci 0000:00:09.0: bridge 32bit mmio: [0xfe000000-0xfebfffff] [ 0.382990] pci 0000:00:09.0: bridge 64bit mmio pref: [0xfa000000-0xfcefffff] [ 0.383021] pci 0000:01:00.0: reg 10 io port: [0xb800-0xb8ff] [ 0.383034] pci 0000:01:00.0: reg 18 64bit mmio: [0xcffff000-0xcfffffff] [ 0.383044] pci 0000:01:00.0: reg 20 64bit mmio: [0xcffe0000-0xcffeffff] [ 0.383049] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.383076] pci 0000:01:00.0: supports D1 D2 [ 0.383077] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.383114] pci 0000:01:00.0: PME# disabled [ 0.383200] pci 0000:00:0a.0: bridge io port: [0xb000-0xbfff] [ 0.383202] pci 0000:00:0a.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.383205] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.383240] pci 0000:05:06.0: reg 10 32bit mmio: [0xfcfff000-0xfcffffff] [ 0.383319] pci 0000:05:08.0: reg 10 io port: [0xe800-0xe83f] [ 0.383389] pci 0000:05:08.0: supports D1 D2 [ 0.383430] pci 0000:00:14.4: transparent bridge [ 0.383467] pci 0000:00:14.4: bridge io port: [0xe000-0xefff] [ 0.383473] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfcf00000-0xfcffffff] [ 0.383485] pci_bus 0000:00: on NUMA node 0 [ 0.383488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.383621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.383666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.383711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.383777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] [ 0.386697] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15) [ 0.386926] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.387154] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.387381] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.387608] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.387881] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15) [ 0.388107] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15) [ 0.388320] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15) [ 0.388679] SCSI subsystem initialized [ 0.388772] libata version 3.00 loaded. [ 0.388832] usbcore: registered new interface driver usbfs [ 0.388888] usbcore: registered new interface driver hub [ 0.388953] usbcore: registered new device driver usb [ 0.443342] raid6: int64x1 2760 MB/s [ 0.500009] raid6: int64x2 3863 MB/s [ 0.556675] raid6: int64x4 2862 MB/s [ 0.613335] raid6: int64x8 2538 MB/s [ 0.670015] raid6: sse2x1 4072 MB/s [ 0.726676] raid6: sse2x2 6741 MB/s [ 0.783334] raid6: sse2x4 7986 MB/s [ 0.783368] raid6: using algorithm sse2x4 (7986 MB/s) [ 0.783454] PCI: Using ACPI for IRQ routing [ 0.783492] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.783546] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.796894] PCI-DMA: Disabling AGP. [ 0.797013] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.797048] PCI-DMA: using GART IOMMU. [ 0.797082] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.798879] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.798988] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.803361] hpet: hpet2 irq 24 for MSI [ 0.813349] Switched to high resolution mode on CPU 0 [ 0.814536] Switched to high resolution mode on CPU 1 [ 0.814545] Switched to high resolution mode on CPU 2 [ 0.814560] Switched to high resolution mode on CPU 3 [ 0.823365] pnp: PnP ACPI init [ 0.823416] ACPI: bus type pnp registered [ 0.825645] pnp 00:0b: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825701] pnp 00:0b: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825755] pnp 00:0b: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.825810] pnp 00:0b: mem resource (0x100000-0xc7efffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.826118] pnp: PnP ACPI: found 12 devices [ 0.826152] ACPI: ACPI bus type pnp unregistered [ 0.826192] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.826246] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.826283] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.826318] system 00:07: ioport range 0x40b-0x40b has been reserved [ 0.826353] system 00:07: ioport range 0x4d6-0x4d6 has been reserved [ 0.826388] system 00:07: ioport range 0xc00-0xc01 has been reserved [ 0.826423] system 00:07: ioport range 0xc14-0xc14 has been reserved [ 0.826458] system 00:07: ioport range 0xc50-0xc51 has been reserved [ 0.826492] system 00:07: ioport range 0xc52-0xc52 has been reserved [ 0.826527] system 00:07: ioport range 0xc6c-0xc6c has been reserved [ 0.826562] system 00:07: ioport range 0xc6f-0xc6f has been reserved [ 0.826597] system 00:07: ioport range 0xcd0-0xcd1 has been reserved [ 0.826632] system 00:07: ioport range 0xcd2-0xcd3 has been reserved [ 0.826683] system 00:07: ioport range 0xcd4-0xcd5 has been reserved [ 0.826718] system 00:07: ioport range 0xcd6-0xcd7 has been reserved [ 0.826753] system 00:07: ioport range 0xcd8-0xcdf has been reserved [ 0.826787] system 00:07: ioport range 0x800-0x89f has been reserved [ 0.826822] system 00:07: ioport range 0xb00-0xb0f has been reserved [ 0.826857] system 00:07: ioport range 0xb20-0xb3f has been reserved [ 0.826892] system 00:07: ioport range 0x900-0x90f has been reserved [ 0.826927] system 00:07: ioport range 0x910-0x91f has been reserved [ 0.826962] system 00:07: ioport range 0xfe00-0xfefe has been reserved [ 0.826997] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.827033] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.827069] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.827105] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.827142] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.832030] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.832065] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.832101] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.832136] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.832191] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.832226] pci 0000:00:09.0: IO window: 0xd000-0xdfff [ 0.832262] pci 0000:00:09.0: MEM window: 0xfe000000-0xfebfffff [ 0.832297] pci 0000:00:09.0: PREFETCH window: 0x000000fa000000-0x000000fcefffff [ 0.832352] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.832386] pci 0000:00:0a.0: IO window: 0xb000-0xbfff [ 0.832422] pci 0000:00:0a.0: MEM window: 0xfde00000-0xfdefffff [ 0.832457] pci 0000:00:0a.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.832512] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.832548] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.832585] pci 0000:00:14.4: MEM window: disabled [ 0.832621] pci 0000:00:14.4: PREFETCH window: 0xfcf00000-0xfcffffff [ 0.832662] alloc irq_desc for 18 on node -1 [ 0.832664] alloc kstat_irqs on node -1 [ 0.832667] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.832704] pci 0000:00:02.0: setting latency timer to 64 [ 0.832707] alloc irq_desc for 17 on node -1 [ 0.832708] alloc kstat_irqs on node -1 [ 0.832710] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.832746] pci 0000:00:09.0: setting latency timer to 64 [ 0.832749] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.832784] pci 0000:00:0a.0: setting latency timer to 64 [ 0.832791] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.832793] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.832794] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.832796] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.832797] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.832799] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.832800] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfebfffff] [ 0.832801] pci_bus 0000:03: resource 2 pref mem [0xfa000000-0xfcefffff] [ 0.832803] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.832804] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.832805] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.832807] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.832808] pci_bus 0000:05: resource 2 pref mem [0xfcf00000-0xfcffffff] [ 0.832810] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.832811] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.832821] NET: Registered protocol family 2 [ 0.832877] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.833358] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.834343] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.834743] TCP: Hash tables configured (established 262144 bind 65536) [ 0.834779] TCP reno registered [ 0.834857] NET: Registered protocol family 1 [ 0.836019] Scanning for low memory corruption every 60 seconds [ 0.836741] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.836874] Loading Reiser4. See www.namesys.com for a description of Reiser4. [ 0.836960] msgmni has been set to 15987 [ 0.837274] alg: No test for stdrng (krng) [ 0.837317] async_tx: api initialized (sync-only) [ 0.837391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.837445] io scheduler noop registered [ 0.837480] io scheduler cfq registered (default) [ 0.837602] pci 0000:02:00.0: Boot video device [ 0.837694] alloc irq_desc for 25 on node -1 [ 0.837695] alloc kstat_irqs on node -1 [ 0.837701] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.837705] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.837795] alloc irq_desc for 26 on node -1 [ 0.837796] alloc kstat_irqs on node -1 [ 0.837799] pcieport-driver 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.837803] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.837891] alloc irq_desc for 27 on node -1 [ 0.837892] alloc kstat_irqs on node -1 [ 0.837895] pcieport-driver 0000:00:0a.0: irq 27 for MSI/MSI-X [ 0.837899] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.838094] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.838148] ACPI: Power Button [PWRF] [ 0.838239] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.838292] ACPI: Power Button [PWRB] [ 0.838444] processor LNXCPU:00: registered as cooling_device0 [ 0.838479] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.838576] processor LNXCPU:01: registered as cooling_device1 [ 0.838646] processor LNXCPU:02: registered as cooling_device2 [ 0.838718] processor LNXCPU:03: registered as cooling_device3 [ 0.842368] Linux agpgart interface v0.103 [ 0.842561] ahci 0000:00:11.0: version 3.0 [ 0.842570] alloc irq_desc for 22 on node -1 [ 0.842571] alloc kstat_irqs on node -1 [ 0.842575] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.842723] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.842778] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 0.843318] scsi0 : ahci [ 0.843461] scsi1 : ahci [ 0.843559] scsi2 : ahci [ 0.843654] scsi3 : ahci [ 0.843748] scsi4 : ahci [ 0.843845] scsi5 : ahci [ 0.843973] ata1: SATA max UDMA/133 irq_stat 0x00400000 irq 22, PHY RDY changed [ 0.844028] ata2: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddff980 irq 22 [ 0.844082] ata3: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa00 irq 22 [ 0.844137] ata4: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffa80 irq 22 [ 0.844191] ata5: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb00 irq 22 [ 0.844245] ata6: SATA max UDMA/133 abar m1024@...ddff800 port 0xfddffb80 irq 22 [ 0.844491] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.844526] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.845071] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.845197] mice: PS/2 mouse device common for all mice [ 0.845347] rtc_cmos 00:02: RTC can wake from S4 [ 0.845413] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.845469] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.845523] md: raid1 personality registered for level 1 [ 0.845558] md: raid6 personality registered for level 6 [ 0.845592] md: raid5 personality registered for level 5 [ 0.845626] md: raid4 personality registered for level 4 [ 0.846205] cpuidle: using governor ladder [ 0.846648] usbcore: registered new interface driver hiddev [ 0.846718] usbcore: registered new interface driver usbhid [ 0.846753] usbhid: v2.6:USB HID core driver [ 0.846813] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.846847] ALSA device list: [ 0.846880] No soundcards found. [ 0.846948] TCP cubic registered [ 0.846987] NET: Registered protocol family 10 [ 0.847118] IPv6 over IPv4 tunneling driver [ 0.847252] NET: Registered protocol family 17 [ 0.847307] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00) [ 0.847386] powernow-k8: 0 : pstate 0 (3200 MHz) [ 0.847420] powernow-k8: 1 : pstate 1 (2500 MHz) [ 0.847454] powernow-k8: 2 : pstate 2 (2100 MHz) [ 0.847488] powernow-k8: 3 : pstate 3 (800 MHz) [ 0.847871] PM: Resume from disk failed. [ 0.847960] Magic number: 9:115:730 [ 0.874152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.163786] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.163845] ata5: SATA link down (SStatus 0 SControl 300) [ 1.163902] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.163955] ata3: SATA link down (SStatus 0 SControl 300) [ 1.164197] ata6: SATA link down (SStatus 0 SControl 300) [ 1.170136] ata4.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7 [ 1.170177] ata4.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.170247] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01110, max UDMA7 [ 1.170286] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.176655] ata4.00: configured for UDMA/133 [ 1.176712] ata2.00: configured for UDMA/133 [ 1.563785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.570130] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7 [ 1.570166] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.576582] ata1.00: configured for UDMA/133 [ 1.587994] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.588218] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.588234] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.588326] sd 0:0:0:0: [sda] Write Protect is off [ 1.588331] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [ 1.588414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.588425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588446] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.588464] sd 1:0:0:0: [sdb] Write Protect is off [ 1.588466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.588475] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588498] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.588541] sdb: [ 1.588565] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.588659] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.588675] sd 3:0:0:0: [sdc] Write Protect is off [ 1.588676] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.588684] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588703] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.588728] sdc: [ 1.588982] sda: sdb1 sdb2 sdb3 sdb4 < sdc1 sdc2 sdc3 sdc4 < sda1 sda2 sda3 sda4 < sdb5 sdc5 sda5 sdc6 sdb6 > [ 1.611001] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.617040] sda6 > [ 1.617377] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.623396] sdc7 > [ 1.623757] sd 3:0:0:0: [sdc] Attached SCSI disk [ 1.623798] md: Waiting for all devices to be available before autodetect [ 1.623833] md: If you don't use raid, use raid=noautodetect [ 1.623947] md: Autodetecting RAID arrays. [ 1.721863] md: Scanned 12 and added 12 devices. [ 1.721898] md: autorun ... [ 1.721932] md: considering sdc6 ... [ 1.721968] md: adding sdc6 ... [ 1.722002] md: sdc5 has different UUID to sdc6 [ 1.722037] md: sdc3 has different UUID to sdc6 [ 1.722072] md: sdc1 has different UUID to sdc6 [ 1.722107] md: adding sda6 ... [ 1.722142] md: sda5 has different UUID to sdc6 [ 1.722177] md: sda3 has different UUID to sdc6 [ 1.722211] md: sda1 has different UUID to sdc6 [ 1.722247] md: adding sdb6 ... [ 1.722281] md: sdb5 has different UUID to sdc6 [ 1.722316] md: sdb3 has different UUID to sdc6 [ 1.722351] md: sdb1 has different UUID to sdc6 [ 1.722482] md: created md3 [ 1.722516] md: bind<sdb6> [ 1.722554] md: bind<sda6> [ 1.722590] md: bind<sdc6> [ 1.722626] md: running: <sdc6><sda6><sdb6> [ 1.722767] raid5: device sdc6 operational as raid disk 2 [ 1.722801] raid5: device sda6 operational as raid disk 0 [ 1.722835] raid5: device sdb6 operational as raid disk 1 [ 1.722989] raid5: allocated 3220kB for md3 [ 1.723036] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2 [ 1.723089] RAID5 conf printout: [ 1.723122] --- rd:3 wd:3 [ 1.723156] disk 0, o:1, dev:sda6 [ 1.723189] disk 1, o:1, dev:sdb6 [ 1.723222] disk 2, o:1, dev:sdc6 [ 1.723269] md3: detected capacity change from 0 to 864065421312 [ 1.723326] md: considering sdc5 ... [ 1.723364] md: adding sdc5 ... [ 1.723398] md: sdc3 has different UUID to sdc5 [ 1.723433] md: sdc1 has different UUID to sdc5 [ 1.723468] md: adding sda5 ... [ 1.723503] md: sda3 has different UUID to sdc5 [ 1.723538] md: sda1 has different UUID to sdc5 [ 1.723573] md: adding sdb5 ... [ 1.723608] md: sdb3 has different UUID to sdc5 [ 1.723643] md: sdb1 has different UUID to sdc5 [ 1.723740] md: created md2 [ 1.723773] md: bind<sdb5> [ 1.723810] md: bind<sda5> [ 1.723847] md: bind<sdc5> [ 1.723883] md: running: <sdc5><sda5><sdb5> [ 1.724022] raid5: device sdc5 operational as raid disk 2 [ 1.724052] raid5: device sda5 operational as raid disk 0 [ 1.724086] raid5: device sdb5 operational as raid disk 1 [ 1.724241] raid5: allocated 3220kB for md2 [ 1.724292] raid5: raid level 5 set md2 active with 3 out of 3 devices, algorithm 2 [ 1.724341] RAID5 conf printout: [ 1.724374] --- rd:3 wd:3 [ 1.724407] disk 0, o:1, dev:sda5 [ 1.724441] disk 1, o:1, dev:sdb5 [ 1.724474] disk 2, o:1, dev:sdc5 [ 1.724518] md2: detected capacity change from 0 to 40007499776 [ 1.724587] md: considering sdc3 ... [ 1.724623] md: adding sdc3 ... [ 1.724657] md: sdc1 has different UUID to sdc3 [ 1.724693] md: adding sda3 ... [ 1.724728] md: sda1 has different UUID to sdc3 [ 1.724763] md: adding sdb3 ... [ 1.724798] md: sdb1 has different UUID to sdc3 [ 1.724896] md: created md1 [ 1.724929] md: bind<sdb3> [ 1.724969] md: bind<sda3> [ 1.725005] md: bind<sdc3> [ 1.725041] md: running: <sdc3><sda3><sdb3> [ 1.725177] raid5: device sdc3 operational as raid disk 2 [ 1.725211] raid5: device sda3 operational as raid disk 0 [ 1.725245] raid5: device sdb3 operational as raid disk 1 [ 1.725401] raid5: allocated 3220kB for md1 [ 1.725447] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2 [ 1.725500] RAID5 conf printout: [ 1.725533] --- rd:3 wd:3 [ 1.725566] disk 0, o:1, dev:sda3 [ 1.725600] disk 1, o:1, dev:sdb3 [ 1.725633] disk 2, o:1, dev:sdc3 [ 1.725680] md1: detected capacity change from 0 to 79998877696 [ 1.725736] md: considering sdc1 ... [ 1.725772] md: adding sdc1 ... [ 1.725807] md: adding sda1 ... [ 1.725842] md: adding sdb1 ... [ 1.725875] md: created md0 [ 1.725908] md: bind<sdb1> [ 1.725946] md: bind<sda1> [ 1.725983] md: bind<sdc1> [ 1.726019] md: running: <sdc1><sda1><sdb1> [ 1.726187] raid1: raid set md0 active with 3 out of 3 mirrors [ 1.726230] md0: detected capacity change from 0 to 65667072 [ 1.726284] md: ... autorun DONE. [ 1.726336] md: Loading md3: /dev/sda3 [ 1.726374] md3: unknown partition table [ 1.726532] md: couldn't update array info. -22 [ 1.726570] md: could not bd_claim sda3. [ 1.726604] md: md_import_device returned -16 [ 1.726639] md: could not bd_claim sdb3. [ 1.726674] md: md_import_device returned -16 [ 1.726712] md: could not bd_claim sdc3. [ 1.726745] md: md_import_device returned -16 [ 1.726780] md: starting md3 failed [ 1.726850] md1: unknown partition table [ 1.763064] reiser4: md1: found disk format 4.0.0. [ 5.786843] VFS: Mounted root (reiser4 filesystem) readonly on device 9:1. [ 5.786894] Freeing unused kernel memory: 376k freed [ 8.951848] udev: starting version 145 [ 9.185756] md0: [ 9.185888] md2: unknown partition table [ 9.205084] unknown partition table [ 10.449026] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 10.449040] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 10.449287] r8169 0000:01:00.0: setting latency timer to 64 [ 10.449317] alloc irq_desc for 28 on node -1 [ 10.449319] alloc kstat_irqs on node -1 [ 10.449329] r8169 0000:01:00.0: irq 28 for MSI/MSI-X [ 10.449435] eth0: RTL8168c/8111c at 0xffffc90012fa8000, 00:19:66:86:ce:12, XID 3c4000c0 IRQ 28 [ 10.467952] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.467954] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 10.467983] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.468015] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 10.468183] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 10.468190] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.468193] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.468215] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 10.468221] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.468234] ehci_hcd 0000:00:12.2: debug port 1 [ 10.468238] ehci_hcd 0000:00:12.2: MWI active [ 10.468239] ehci_hcd 0000:00:12.2: supports USB remote wakeup [ 10.468252] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000 [ 10.468255] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.468261] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.477924] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 10.477953] usb usb1: default language 0x0409 [ 10.477957] usb usb1: udev 1, busnum 1, minor = 0 [ 10.477958] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.477959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.477961] usb usb1: Product: EHCI Host Controller [ 10.477962] usb usb1: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.477963] usb usb1: SerialNumber: 0000:00:12.2 [ 10.477991] usb usb1: uevent [ 10.478347] usb usb1: usb_probe_device [ 10.478349] usb usb1: configuration #1 chosen from 1 choice [ 10.478355] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 10.478364] usb 1-0:1.0: uevent [ 10.478392] hub 1-0:1.0: usb_probe_interface [ 10.478393] hub 1-0:1.0: usb_probe_interface - got id [ 10.478395] hub 1-0:1.0: USB hub found [ 10.478401] hub 1-0:1.0: 6 ports detected [ 10.478402] hub 1-0:1.0: standalone hub [ 10.478403] hub 1-0:1.0: no power switching (usb 1.0) [ 10.478404] hub 1-0:1.0: individual port over-current protection [ 10.478405] hub 1-0:1.0: power on to power good time: 20ms [ 10.478408] hub 1-0:1.0: local power source is good [ 10.478410] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 10.478452] alloc irq_desc for 19 on node -1 [ 10.478453] alloc kstat_irqs on node -1 [ 10.478458] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 10.478479] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 10.478518] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 10.478524] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6 [ 10.478527] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 10.478541] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 10.478547] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.478559] ehci_hcd 0000:00:13.2: debug port 1 [ 10.478562] ehci_hcd 0000:00:13.2: MWI active [ 10.478563] ehci_hcd 0000:00:13.2: supports USB remote wakeup [ 10.478574] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800 [ 10.478577] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 10.478582] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 10.488887] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 10.488909] usb usb2: default language 0x0409 [ 10.488912] usb usb2: udev 1, busnum 2, minor = 128 [ 10.488913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 10.488915] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.488916] usb usb2: Product: EHCI Host Controller [ 10.488917] usb usb2: Manufacturer: Linux 2.6.31r4 ehci_hcd [ 10.488918] usb usb2: SerialNumber: 0000:00:13.2 [ 10.488948] usb usb2: uevent [ 10.488986] usb usb2: usb_probe_device [ 10.488988] usb usb2: configuration #1 chosen from 1 choice [ 10.488993] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 10.489001] usb 2-0:1.0: uevent [ 10.489020] hub 2-0:1.0: usb_probe_interface [ 10.489021] hub 2-0:1.0: usb_probe_interface - got id [ 10.489023] hub 2-0:1.0: USB hub found [ 10.489028] hub 2-0:1.0: 6 ports detected [ 10.489029] hub 2-0:1.0: standalone hub [ 10.489030] hub 2-0:1.0: no power switching (usb 1.0) [ 10.489032] hub 2-0:1.0: individual port over-current protection [ 10.489033] hub 2-0:1.0: power on to power good time: 20ms [ 10.489035] hub 2-0:1.0: local power source is good [ 10.489037] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 10.528716] Linux video capture interface: v2.00 [ 10.541378] bttv: driver version 0.9.18 loaded [ 10.541379] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 10.541441] bttv: Bt8xx card found (0). [ 10.541449] alloc irq_desc for 21 on node -1 [ 10.541451] alloc kstat_irqs on node -1 [ 10.541456] bttv 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 10.541465] bttv0: Bt848 (rev 18) at 0000:05:06.0, irq: 21, latency: 128, mmio: 0xfcfff000 [ 10.541511] bttv0: using: Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar [card=25,insmod option] [ 10.541513] IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.541548] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 10.577936] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 10.577939] hub 1-0:1.0: port 2: status 0501 change 0001 [ 10.587948] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 10.677940] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 10.677949] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 10.730446] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.730450] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.783768] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 10.837110] ehci_hcd 0000:00:12.2: port 2 high speed [ 10.837113] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 10.908580] usb 1-2: default language 0x0409 [ 10.908829] usb 1-2: udev 2, busnum 1, minor = 1 [ 10.908830] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 10.908832] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 10.908833] usb 1-2: Product: USB2.0 Hub [ 10.908871] usb 1-2: uevent [ 10.908881] usb 1-2: usb_probe_device [ 10.908883] usb 1-2: configuration #1 chosen from 1 choice [ 10.909295] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 10.909305] usb 1-2:1.0: uevent [ 10.909313] hub 1-2:1.0: usb_probe_interface [ 10.909314] hub 1-2:1.0: usb_probe_interface - got id [ 10.909315] hub 1-2:1.0: USB hub found [ 10.909576] hub 1-2:1.0: 4 ports detected [ 10.909578] hub 1-2:1.0: standalone hub [ 10.909579] hub 1-2:1.0: individual port power switching [ 10.909580] hub 1-2:1.0: individual port over-current protection [ 10.909581] hub 1-2:1.0: Single TT [ 10.909582] hub 1-2:1.0: TT requires at most 32 FS bit times (2664 ns) [ 10.909584] hub 1-2:1.0: Port indicators are supported [ 10.909585] hub 1-2:1.0: power on to power good time: 100ms [ 10.909951] hub 1-2:1.0: local power source is good [ 10.909952] hub 1-2:1.0: enabling power on all ports [ 11.010944] hub 1-2:1.0: port 2: status 0301 change 0001 [ 11.110432] usb 1-2: link qh256-0001/ffff8800c7800180 start 1 [1/0 us] [ 11.110442] hub 1-2:1.0: state 7 ports 4 chg 0004 evt 0000 [ 11.110681] hub 1-2:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 11.177677] usb 1-2.2: new low speed USB device using ehci_hcd and address 3 [ 11.264416] usb 1-2.2: skipped 1 descriptor after interface [ 11.264418] usb 1-2.2: skipped 1 descriptor after interface [ 11.264913] usb 1-2.2: default language 0x0409 [ 11.267162] usb 1-2.2: udev 3, busnum 1, minor = 2 [ 11.267164] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c518 [ 11.267165] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 11.267166] usb 1-2.2: Product: USB Receiver [ 11.267167] usb 1-2.2: Manufacturer: Logitech [ 11.267194] usb 1-2.2: uevent [ 11.267201] usb 1-2.2: usb_probe_device [ 11.267203] usb 1-2.2: configuration #1 chosen from 1 choice [ 11.274538] usb 1-2.2: adding 1-2.2:1.0 (config #1, interface 0) [ 11.274551] usb 1-2.2:1.0: uevent [ 11.274561] usbhid 1-2.2:1.0: usb_probe_interface [ 11.274562] usbhid 1-2.2:1.0: usb_probe_interface - got id [ 11.274905] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.277797] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 11.277835] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input0 [ 11.277844] usb 1-2.2: adding 1-2.2:1.1 (config #1, interface 1) [ 11.277852] usb 1-2.2:1.1: uevent [ 11.277859] usbhid 1-2.2:1.1: usb_probe_interface [ 11.277860] usbhid 1-2.2:1.1: usb_probe_interface - got id [ 11.278154] usb 1-2: clear tt buffer port 2, a3 ep0 t80008d42 [ 11.283458] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input4 [ 11.283468] usb 1-2.2: link qh8-0e01/ffff8800c7800300 start 2 [1/2 us] [ 11.283485] drivers/usb/core/file.c: looking for a minor, starting at 96 [ 11.283516] generic-usb 0003:046D:C518.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-2.2/input1 [ 11.283531] hub 1-2:1.0: state 7 ports 4 chg 0000 evt 0004 [ 11.309746] usb 1-2.2:1.0: uevent [ 11.309808] usb 1-2.2: uevent [ 11.309823] usb 1-2.2:1.0: uevent [ 11.309882] usb 1-2.2: uevent [ 11.310370] usb 1-2.2:1.1: uevent [ 11.310439] usb 1-2.2: uevent [ 11.310459] usb 1-2.2:1.0: uevent [ 11.311117] usb 1-2.2:1.1: uevent [ 11.320348] usb 1-2.2:1.0: uevent [ 11.546696] bttv0: tea5757: read timeout [ 11.546698] bttv0: tuner type=5 [ 11.558212] bttv0: audio absent, no audio device found! [ 11.570726] TUNER: Unable to find symbol tea5767_autodetection() [ 11.570729] tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw]) [ 11.573402] tuner-simple 0-0060: creating new instance [ 11.573405] tuner-simple 0-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 11.574211] bttv0: registered device video0 [ 11.574239] bttv0: registered device vbi0 [ 11.867533] reiser4: md2: found disk format 4.0.0. [ 13.337099] hub 2-0:1.0: hub_suspend [ 13.337105] usb usb2: bus auto-suspend [ 13.337107] ehci_hcd 0000:00:13.2: suspend root hub [ 13.670061] reiser4: md3: found disk format 4.0.0. [ 54.876174] reiser4: sdc7: found disk format 4.0.0. [ 67.268208] Adding 7815612k swap on /dev/sda2. Priority:1 extents:1 across:7815612k [ 67.280636] Adding 7815612k swap on /dev/sdb2. Priority:1 extents:1 across:7815612k [ 67.316664] Adding 7815612k swap on /dev/sdc2. Priority:1 extents:1 across:7815612k [ 67.883788] w83627ehf: Found W83627EHG chip at 0x290 [ 68.285889] r8169: eth0: link up [ 68.285899] r8169: eth0: link up [ 70.114598] usb usb1: uevent [ 70.114699] usb 1-0:1.0: uevent [ 70.114788] usb 1-2: uevent [ 70.114889] usb 1-2.2: uevent [ 70.114988] usb 1-2.2:1.0: uevent [ 70.115702] usb 1-2.2:1.1: uevent [ 70.116378] usb 1-2:1.0: uevent [ 70.116751] usb usb2: uevent [ 70.116849] usb 2-0:1.0: uevent [ 71.277145] alloc irq_desc for 23 on node -1 [ 71.277151] alloc kstat_irqs on node -1 [ 71.277165] EMU10K1_Audigy 0000:05:08.0: PCI INT A -> GSI 23 (level, low) - > IRQ 23 [ 71.284131] Audigy2 value: Special config. [ 72.553971] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 72.553980] Disabling lock debugging due to kernel taint [ 72.603989] [fglrx] Maximum main memory to use for locked dma buffers: 7760 MBytes. [ 72.604281] [fglrx] vendor: 1002 device: 9501 count: 1 [ 72.605042] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 72.605065] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 72.605074] pci 0000:02:00.0: setting latency timer to 64 [ 72.605605] [fglrx] Kernel PAT support is enabled [ 72.605644] [fglrx] module loaded - fglrx 8.67.2 [Sep 15 2009] with 1 minors [ 72.762362] alloc irq_desc for 29 on node -1 [ 72.762364] alloc kstat_irqs on node -1 [ 72.762372] fglrx_pci 0000:02:00.0: irq 29 for MSI/MSI-X [ 72.762753] [fglrx] Firegl kernel thread PID: 3876 [ 74.920122] [fglrx] Gart USWC size:1279 M. [ 74.920125] [fglrx] Gart cacheable size:508 M. [ 74.920128] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 74.920129] [fglrx] Reserved FB block: Unshared offset:fbff000, size:401000 [ 74.920131] [fglrx] Reserved FB block: Unshared offset:1fffc000, size:4000 [ 76.137549] usb 1-2.2: link qh8-0e01/ffff8800c78003c0 start 3 [1/2 us] [ 189.317763] reiser4[bogofilter(4078)]: disable_write_barrier (fs/reiser4/wander.c:235)[zam-1055]: [ 189.317767] NOTICE: md3 does not support write barriers, using synchronous write instead. cat /proc/mtrr reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back Glück Auf Volker -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists