| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20090915164415.GD46353@plap4-2.local>
Date: Tue, 15 Sep 2009 09:44:15 -0700
From: Andrew Vasquez <andrew.vasquez@...gic.com>
To: James Bottomley <James.Bottomley@...e.de>
Cc: Greg KH <greg@...ah.com>,
Linux SCSI Mailing List <linux-scsi@...r.kernel.org>,
Randy Dunlap <randy.dunlap@...cle.com>,
Stephen Rothwell <sfr@...b.auug.org.au>,
"linux-next@...r.kernel.org" <linux-next@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Giridhar Malavali <giridhar.malavali@...gic.com>,
Ravi Anand <ravi.anand@...gic.com>,
Lalit Chandivade <lalit.chandivade@...gic.com>
Subject: [PATCHv4] qla2xxx: Add firmware-dump kobject uevent notification.
Signed-off-by: Andrew Vasquez <andrew.vasquez@...gic.com>
---
On Tue, 15 Sep 2009, James Bottomley wrote:
> On Tue, 2009-09-15 at 08:33 -0700, Greg KH wrote:
> > On Sat, Sep 12, 2009 at 09:30:07AM -0500, James Bottomley wrote:
> > > On Fri, 2009-09-11 at 21:33 -0700, Greg KH wrote:
> > > > On Fri, Sep 11, 2009 at 07:56:23PM -0700, Andrew Vasquez wrote:
> > > > > On Fri, 11 Sep 2009, Greg KH wrote:
> > > > >
> > > > > > On Fri, Sep 11, 2009 at 05:38:08PM -0700, Andrew Vasquez wrote:
> > > > > > > Randy Dunlap noted:
> > > > > > >
> > > > > > > when CONFIG_MODULES=n:
> > > > > > >
> > > > > > > drivers/scsi/qla2xxx/qla_os.c:2685: error: dereferencing pointer to incomplete type
> > > > > > >
> > > > > > > in
> > > > > > >
> > > > > > > kobject_uevent_env(&(&vha->hw->pdev->driver->driver)->owner->mkobj.kobj,
> > > > > > > KOBJ_CHANGE, envp);
> > > > > > >
> > > > > > > Trigger kobject event on the 'struct device' hanging off the pci_dev.
> > > > > >
> > > > > > Um, why? What are you trying to do here? kobject change should not be
> > > > > > for a device, or a "normal" kobject.
> > > > > >
> > > > > > What do you expect userspace to do with this? Where have you documented
> > > > > > it?
> > > > >
> > > > > The purpose was described here:
> > > > >
> > > > > http://article.gmane.org/gmane.linux.scsi/54155
> > > > >
> > > > > Basically we'd like to instruct user-space to retrieve a blob of data
> > > > > automatically.
> > > >
> > > > Hm, like a firmware object perhaps?
> > > >
> > > > > Original implementation used the kboject hanging off
> > > > > the module which does not exist when CONFIG_MODULES=n. It was
> > > > > suggested that perhaps an alternative would be to use 'struct device'
> > > > > kobj. Any tips on how to trigger such a driver-specific event,
> > > > > perhaps a dedicated kobject exported by the driver itself???
> > > >
> > > > Why not use the firmware interface for it, that is what it is designed
> > > > for, and you will not have to craft any new udev rules.
> > >
> > > The data is going the wrong way to use the current firmware interface,
> > > which is designed to load data from userspace into the kernel. For this
> > > interface, we want the data to go the other way (i.e. the kernel has a
> > > blob of dump data it would like userspace to save if it can).
> >
> > Ick.
>
> It's a natural debugging event ... the user can simply program the
> system to discard the dump.
>
> > > I'd be amenable to updating the firmware interface to do this, but it
> > > looks like adding a completely new codepath, which it's not clear even
> > > belongs there.
> >
> > Well, I don't think it deserves a kobject change event, as that means
> > something a bit different to userspace today, right?
>
> Well, the documentation (in include/linux/kobject.h) does say that
> KOBJ_CHANGED is the dumping ground for events that don't match anything
> else, which this one seems to qualify as. What else do you suggest?
>
> > Either way, I see no documentation being added to the Documentation/ABI/
> > directory describing what is happening here, that needs to be added at
> > the least.
>
> OK, we can add that in the next go around.
>
> Andrew, I actually dropped the patch (just this one, not the rest of the
> qla2xxx patches) from the tree, so we can work on updating this as a
> whole.
Ok, how about this squashed commit as a first stab at documenting the
ABI???
Thanks, AV
Documentation/ABI/stable/sysfs-driver-qla2xxx | 8 +++
drivers/scsi/qla2xxx/qla_dbg.c | 78 +++++++-----------------
drivers/scsi/qla2xxx/qla_def.h | 5 ++
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_os.c | 35 +++++++++++
5 files changed, 72 insertions(+), 55 deletions(-)
create mode 100644 Documentation/ABI/stable/sysfs-driver-qla2xxx
diff --git a/Documentation/ABI/stable/sysfs-driver-qla2xxx b/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 0000000..9a59d84
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date: September 2009
+Contact: QLogic Linux Driver <linux-driver@...gic.com>
+Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
+ signal a firmware-dump has been generated by the driver and is
+ ready for retrieval.
+Users: qla2xxx-udev.sh. Proposed changes should be mailed to
+ linux-driver@...gic.com
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index cca8e4a..cb2eca4 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -377,6 +377,24 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
return ptr + sizeof(struct qla2xxx_mq_chain);
}
+static void
+qla2xxx_dump_post_process(scsi_qla_host_t *vha, int rval)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Failed to dump firmware (%x)!!!\n", rval);
+ ha->fw_dumped = 0;
+ } else {
+ qla_printk(KERN_INFO, ha,
+ "Firmware dump saved to temp buffer (%ld/%p).\n",
+ vha->host_no, ha->fw_dump);
+ ha->fw_dumped = 1;
+ qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+ }
+}
+
/**
* qla2300_fw_dump() - Dumps binary data from the 2300 firmware.
* @ha: HA context
@@ -530,17 +548,7 @@ qla2300_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
if (rval == QLA_SUCCESS)
qla2xxx_copy_queues(ha, nxt);
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla2300_fw_dump_failed:
if (!hardware_locked)
@@ -737,17 +745,7 @@ qla2100_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
if (rval == QLA_SUCCESS)
qla2xxx_copy_queues(ha, &fw->risc_ram[cnt]);
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla2100_fw_dump_failed:
if (!hardware_locked)
@@ -984,17 +982,7 @@ qla24xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
qla24xx_copy_eft(ha, nxt);
qla24xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla24xx_fw_dump_failed:
if (!hardware_locked)
@@ -1305,17 +1293,7 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
}
qla25xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla25xx_fw_dump_failed:
if (!hardware_locked)
@@ -1628,17 +1606,7 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked)
}
qla81xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla81xx_fw_dump_failed:
if (!hardware_locked)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2150618..d8ce310 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2123,6 +2123,7 @@ enum qla_work_type {
QLA_EVT_ASYNC_LOGIN_DONE,
QLA_EVT_ASYNC_LOGOUT,
QLA_EVT_ASYNC_LOGOUT_DONE,
+ QLA_EVT_UEVENT,
};
@@ -2146,6 +2147,10 @@ struct qla_work_evt {
#define QLA_LOGIO_LOGIN_RETRIED BIT_0
u16 data[2];
} logio;
+ struct {
+ u32 code;
+#define QLA_UEVENT_CODE_FW_DUMP 0
+ } uevent;
} u;
};
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f3d1d1a..14e0562 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -92,6 +92,7 @@ extern int qla2x00_post_async_logout_work(struct scsi_qla_host *, fc_port_t *,
uint16_t *);
extern int qla2x00_post_async_logout_done_work(struct scsi_qla_host *,
fc_port_t *, uint16_t *);
+extern int qla2x00_post_uevent_work(struct scsi_qla_host *, u32);
extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b79fca7..ecf2a40 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/kobject.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -2653,6 +2654,37 @@ qla2x00_post_async_work(login_done, QLA_EVT_ASYNC_LOGIN_DONE);
qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT);
qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE);
+int
+qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(vha, QLA_EVT_UEVENT);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.uevent.code = code;
+ return qla2x00_post_work(vha, e);
+}
+
+static void
+qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)
+{
+ char event_string[40];
+ char *envp[] = { event_string, NULL };
+
+ switch (code) {
+ case QLA_UEVENT_CODE_FW_DUMP:
+ snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld",
+ vha->host_no);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ kobject_uevent_env(&vha->hw->pdev->dev.kobj, KOBJ_CHANGE, envp);
+}
+
void
qla2x00_do_work(struct scsi_qla_host *vha)
{
@@ -2690,6 +2722,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)
qla2x00_async_logout_done(vha, e->u.logio.fcport,
e->u.logio.data);
break;
+ case QLA_EVT_UEVENT:
+ qla2x00_uevent_emit(vha, e->u.uevent.code);
+ break;
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
--
1.6.5.rc0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists