| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1253419185.3253.21.camel@ank32.eng.vmware.com>
Date: Sat, 19 Sep 2009 20:59:45 -0700
From: Alok Kataria <akataria@...are.com>
To: Ingo Molnar <mingo@...e.hu>, Thomas Gleixner <tglx@...utronix.de>,
"H. Peter Anvin" <hpa@...or.com>
Cc: the arch/x86 maintainers <x86@...nel.org>,
LKML <linux-kernel@...r.kernel.org>,
Jeremy Fitzhardinge <jeremy@...p.org>,
Chris Wright <chrisw@...s-sol.org>,
Rusty Russell <rusty@...tcorp.com.au>,
"virtualization@...ts.osdl.org" <virtualization@...ts.osdl.org>,
Greg KH <greg@...ah.com>
Subject: Re: Paravirtualization on VMware's Platform [VMI].
Here is the patch which actually removes the vmi code.
Signed-off-by: Alok N Kataria <akataria@...are.com>
---
Documentation/kernel-parameters.txt | 2
arch/x86/Kconfig | 10
arch/x86/include/asm/vmi.h | 269 ----------
arch/x86/include/asm/vmi_time.h | 98 ----
arch/x86/kernel/Makefile | 1
arch/x86/kernel/setup.c | 7
arch/x86/kernel/smpboot.c | 9
arch/x86/kernel/vmi_32.c | 913 -----------------------------------
arch/x86/kernel/vmiclock_32.c | 321 ------------
9 files changed, 1 insertions(+), 1629 deletions(-)
delete mode 100644 arch/x86/include/asm/vmi.h
delete mode 100644 arch/x86/include/asm/vmi_time.h
delete mode 100644 arch/x86/kernel/vmi_32.c
delete mode 100644 arch/x86/kernel/vmiclock_32.c
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f45d0d8..3c679aa 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -463,7 +463,7 @@ and is between 256 and 4096 characters. It is defined in the file
[ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
pxa_timer,timer3,32k_counter,timer0_1
[AVR32] avr32
- [X86-32] pit,hpet,tsc,vmi-timer;
+ [X86-32] pit,hpet,tsc;
scx200_hrt on Geode; cyclone on IBM x440
[MIPS] MIPS
[PARISC] cr16
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index beed5c2..c761aeb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -484,16 +484,6 @@ if PARAVIRT_GUEST
source "arch/x86/xen/Kconfig"
-config VMI
- bool "VMI Guest support"
- select PARAVIRT
- depends on X86_32
- ---help---
- VMI provides a paravirtualized interface to the VMware ESX server
- (it could be used by other hypervisors in theory too, but is not
- at the moment), by linking the kernel to a GPL-ed ROM module
- provided by the hypervisor.
-
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
deleted file mode 100644
index 61e08c0..0000000
--- a/arch/x86/include/asm/vmi.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * VMI interface definition
- *
- * Copyright (C) 2005, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Maintained by: Zachary Amsden zach@...are.com
- *
- */
-#include <linux/types.h>
-
-/*
- *---------------------------------------------------------------------
- *
- * VMI Option ROM API
- *
- *---------------------------------------------------------------------
- */
-#define VMI_SIGNATURE 0x696d5663 /* "cVmi" */
-
-#define PCI_VENDOR_ID_VMWARE 0x15AD
-#define PCI_DEVICE_ID_VMWARE_VMI 0x0801
-
-/*
- * We use two version numbers for compatibility, with the major
- * number signifying interface breakages, and the minor number
- * interface extensions.
- */
-#define VMI_API_REV_MAJOR 3
-#define VMI_API_REV_MINOR 0
-
-#define VMI_CALL_CPUID 0
-#define VMI_CALL_WRMSR 1
-#define VMI_CALL_RDMSR 2
-#define VMI_CALL_SetGDT 3
-#define VMI_CALL_SetLDT 4
-#define VMI_CALL_SetIDT 5
-#define VMI_CALL_SetTR 6
-#define VMI_CALL_GetGDT 7
-#define VMI_CALL_GetLDT 8
-#define VMI_CALL_GetIDT 9
-#define VMI_CALL_GetTR 10
-#define VMI_CALL_WriteGDTEntry 11
-#define VMI_CALL_WriteLDTEntry 12
-#define VMI_CALL_WriteIDTEntry 13
-#define VMI_CALL_UpdateKernelStack 14
-#define VMI_CALL_SetCR0 15
-#define VMI_CALL_SetCR2 16
-#define VMI_CALL_SetCR3 17
-#define VMI_CALL_SetCR4 18
-#define VMI_CALL_GetCR0 19
-#define VMI_CALL_GetCR2 20
-#define VMI_CALL_GetCR3 21
-#define VMI_CALL_GetCR4 22
-#define VMI_CALL_WBINVD 23
-#define VMI_CALL_SetDR 24
-#define VMI_CALL_GetDR 25
-#define VMI_CALL_RDPMC 26
-#define VMI_CALL_RDTSC 27
-#define VMI_CALL_CLTS 28
-#define VMI_CALL_EnableInterrupts 29
-#define VMI_CALL_DisableInterrupts 30
-#define VMI_CALL_GetInterruptMask 31
-#define VMI_CALL_SetInterruptMask 32
-#define VMI_CALL_IRET 33
-#define VMI_CALL_SYSEXIT 34
-#define VMI_CALL_Halt 35
-#define VMI_CALL_Reboot 36
-#define VMI_CALL_Shutdown 37
-#define VMI_CALL_SetPxE 38
-#define VMI_CALL_SetPxELong 39
-#define VMI_CALL_UpdatePxE 40
-#define VMI_CALL_UpdatePxELong 41
-#define VMI_CALL_MachineToPhysical 42
-#define VMI_CALL_PhysicalToMachine 43
-#define VMI_CALL_AllocatePage 44
-#define VMI_CALL_ReleasePage 45
-#define VMI_CALL_InvalPage 46
-#define VMI_CALL_FlushTLB 47
-#define VMI_CALL_SetLinearMapping 48
-
-#define VMI_CALL_SetIOPLMask 61
-#define VMI_CALL_SetInitialAPState 62
-#define VMI_CALL_APICWrite 63
-#define VMI_CALL_APICRead 64
-#define VMI_CALL_IODelay 65
-#define VMI_CALL_SetLazyMode 73
-
-/*
- *---------------------------------------------------------------------
- *
- * MMU operation flags
- *
- *---------------------------------------------------------------------
- */
-
-/* Flags used by VMI_{Allocate|Release}Page call */
-#define VMI_PAGE_PAE 0x10 /* Allocate PAE shadow */
-#define VMI_PAGE_CLONE 0x20 /* Clone from another shadow */
-#define VMI_PAGE_ZEROED 0x40 /* Page is pre-zeroed */
-
-
-/* Flags shared by Allocate|Release Page and PTE updates */
-#define VMI_PAGE_PT 0x01
-#define VMI_PAGE_PD 0x02
-#define VMI_PAGE_PDP 0x04
-#define VMI_PAGE_PML4 0x08
-
-#define VMI_PAGE_NORMAL 0x00 /* for debugging */
-
-/* Flags used by PTE updates */
-#define VMI_PAGE_CURRENT_AS 0x10 /* implies VMI_PAGE_VA_MASK is valid */
-#define VMI_PAGE_DEFER 0x20 /* may queue update until TLB inval */
-#define VMI_PAGE_VA_MASK 0xfffff000
-
-#ifdef CONFIG_X86_PAE
-#define VMI_PAGE_L1 (VMI_PAGE_PT | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2 (VMI_PAGE_PD | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#else
-#define VMI_PAGE_L1 (VMI_PAGE_PT | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2 (VMI_PAGE_PD | VMI_PAGE_ZEROED)
-#endif
-
-/* Flags used by VMI_FlushTLB call */
-#define VMI_FLUSH_TLB 0x01
-#define VMI_FLUSH_GLOBAL 0x02
-
-/*
- *---------------------------------------------------------------------
- *
- * VMI relocation definitions for ROM call get_reloc
- *
- *---------------------------------------------------------------------
- */
-
-/* VMI Relocation types */
-#define VMI_RELOCATION_NONE 0
-#define VMI_RELOCATION_CALL_REL 1
-#define VMI_RELOCATION_JUMP_REL 2
-#define VMI_RELOCATION_NOP 3
-
-#ifndef __ASSEMBLY__
-struct vmi_relocation_info {
- unsigned char *eip;
- unsigned char type;
- unsigned char reserved[3];
-};
-#endif
-
-
-/*
- *---------------------------------------------------------------------
- *
- * Generic ROM structures and definitions
- *
- *---------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLY__
-
-struct vrom_header {
- u16 rom_signature; /* option ROM signature */
- u8 rom_length; /* ROM length in 512 byte chunks */
- u8 rom_entry[4]; /* 16-bit code entry point */
- u8 rom_pad0; /* 4-byte align pad */
- u32 vrom_signature; /* VROM identification signature */
- u8 api_version_min;/* Minor version of API */
- u8 api_version_maj;/* Major version of API */
- u8 jump_slots; /* Number of jump slots */
- u8 reserved1; /* Reserved for expansion */
- u32 virtual_top; /* Hypervisor virtual address start */
- u16 reserved2; /* Reserved for expansion */
- u16 license_offs; /* Offset to License string */
- u16 pci_header_offs;/* Offset to PCI OPROM header */
- u16 pnp_header_offs;/* Offset to PnP OPROM header */
- u32 rom_pad3; /* PnP reserverd / VMI reserved */
- u8 reserved[96]; /* Reserved for headers */
- char vmi_init[8]; /* VMI_Init jump point */
- char get_reloc[8]; /* VMI_GetRelocationInfo jump point */
-} __attribute__((packed));
-
-struct pnp_header {
- char sig[4];
- char rev;
- char size;
- short next;
- short res;
- long devID;
- unsigned short manufacturer_offset;
- unsigned short product_offset;
-} __attribute__((packed));
-
-struct pci_header {
- char sig[4];
- short vendorID;
- short deviceID;
- short vpdData;
- short size;
- char rev;
- char class;
- char subclass;
- char interface;
- short chunks;
- char rom_version_min;
- char rom_version_maj;
- char codetype;
- char lastRom;
- short reserved;
-} __attribute__((packed));
-
-/* Function prototypes for bootstrapping */
-#ifdef CONFIG_VMI
-extern void vmi_init(void);
-extern void vmi_activate(void);
-extern void vmi_bringup(void);
-#else
-static inline void vmi_init(void) {}
-static inline void vmi_activate(void) {}
-static inline void vmi_bringup(void) {}
-#endif
-
-/* State needed to start an application processor in an SMP system. */
-struct vmi_ap_state {
- u32 cr0;
- u32 cr2;
- u32 cr3;
- u32 cr4;
-
- u64 efer;
-
- u32 eip;
- u32 eflags;
- u32 eax;
- u32 ebx;
- u32 ecx;
- u32 edx;
- u32 esp;
- u32 ebp;
- u32 esi;
- u32 edi;
- u16 cs;
- u16 ss;
- u16 ds;
- u16 es;
- u16 fs;
- u16 gs;
- u16 ldtr;
-
- u16 gdtr_limit;
- u32 gdtr_base;
- u32 idtr_base;
- u16 idtr_limit;
-};
-
-#endif
diff --git a/arch/x86/include/asm/vmi_time.h b/arch/x86/include/asm/vmi_time.h
deleted file mode 100644
index c6e0bee..0000000
--- a/arch/x86/include/asm/vmi_time.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * VMI Time wrappers
- *
- * Copyright (C) 2006, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to dhecht@...are.com
- *
- */
-
-#ifndef _ASM_X86_VMI_TIME_H
-#define _ASM_X86_VMI_TIME_H
-
-/*
- * Raw VMI call indices for timer functions
- */
-#define VMI_CALL_GetCycleFrequency 66
-#define VMI_CALL_GetCycleCounter 67
-#define VMI_CALL_SetAlarm 68
-#define VMI_CALL_CancelAlarm 69
-#define VMI_CALL_GetWallclockTime 70
-#define VMI_CALL_WallclockUpdated 71
-
-/* Cached VMI timer operations */
-extern struct vmi_timer_ops {
- u64 (*get_cycle_frequency)(void);
- u64 (*get_cycle_counter)(int);
- u64 (*get_wallclock)(void);
- int (*wallclock_updated)(void);
- void (*set_alarm)(u32 flags, u64 expiry, u64 period);
- void (*cancel_alarm)(u32 flags);
-} vmi_timer_ops;
-
-/* Prototypes */
-extern void __init vmi_time_init(void);
-extern unsigned long vmi_get_wallclock(void);
-extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_sched_clock(void);
-extern unsigned long vmi_tsc_khz(void);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern void __devinit vmi_time_bsp_init(void);
-extern void __devinit vmi_time_ap_init(void);
-#endif
-
-/*
- * When run under a hypervisor, a vcpu is always in one of three states:
- * running, halted, or ready. The vcpu is in the 'running' state if it
- * is executing. When the vcpu executes the halt interface, the vcpu
- * enters the 'halted' state and remains halted until there is some work
- * pending for the vcpu (e.g. an alarm expires, host I/O completes on
- * behalf of virtual I/O). At this point, the vcpu enters the 'ready'
- * state (waiting for the hypervisor to reschedule it). Finally, at any
- * time when the vcpu is not in the 'running' state nor the 'halted'
- * state, it is in the 'ready' state.
- *
- * Real time is advances while the vcpu is 'running', 'ready', or
- * 'halted'. Stolen time is the time in which the vcpu is in the
- * 'ready' state. Available time is the remaining time -- the vcpu is
- * either 'running' or 'halted'.
- *
- * All three views of time are accessible through the VMI cycle
- * counters.
- */
-
-/* The cycle counters. */
-#define VMI_CYCLES_REAL 0
-#define VMI_CYCLES_AVAILABLE 1
-#define VMI_CYCLES_STOLEN 2
-
-/* The alarm interface 'flags' bits */
-#define VMI_ALARM_COUNTERS 2
-
-#define VMI_ALARM_COUNTER_MASK 0x000000ff
-
-#define VMI_ALARM_WIRED_IRQ0 0x00000000
-#define VMI_ALARM_WIRED_LVTT 0x00010000
-
-#define VMI_ALARM_IS_ONESHOT 0x00000000
-#define VMI_ALARM_IS_PERIODIC 0x00000100
-
-#define CONFIG_VMI_ALARM_HZ 100
-
-#endif /* _ASM_X86_VMI_TIME_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 91d4189..255d6c8 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -92,7 +92,6 @@ obj-$(CONFIG_MGEODE_LX) += geode_32.o mfgpt_32.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o
obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
-obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f327bcc..f2fefe0 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -82,7 +82,6 @@
#include <asm/dmi.h>
#include <asm/io_apic.h>
#include <asm/ist.h>
-#include <asm/vmi.h>
#include <asm/setup_arch.h>
#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
@@ -697,9 +696,6 @@ void __init setup_arch(char **cmdline_p)
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
- /* VMI may relocate the fixmap; do this before touching ioremap area */
- vmi_init();
-
early_cpu_init();
early_ioremap_init();
@@ -798,9 +794,6 @@ void __init setup_arch(char **cmdline_p)
check_efer();
#endif
- /* Must be before kernel pagetables are setup */
- vmi_activate();
-
/* after early param, so could get panic from serial */
reserve_early_setup_data();
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index a9ccc17..52b60dd 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -60,7 +60,6 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mtrr.h>
-#include <asm/vmi.h>
#include <asm/apic.h>
#include <asm/setup.h>
#include <asm/uv/uv.h>
@@ -274,7 +273,6 @@ notrace static void __cpuinit start_secondary(void *unused)
* fragile that we want to limit the things done here to the
* most necessary things.
*/
- vmi_bringup();
cpu_init();
preempt_disable();
smp_callin();
@@ -599,13 +597,6 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
num_starts = 0;
/*
- * Paravirt / VMI wants a startup IPI hook here to set up the
- * target processor state.
- */
- startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
- (unsigned long)stack_start.sp);
-
- /*
* Run STARTUP IPI loop.
*/
pr_debug("#startup loops: %d.\n", num_starts);
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
deleted file mode 100644
index 31e6f6c..0000000
--- a/arch/x86/kernel/vmi_32.c
+++ /dev/null
@@ -1,913 +0,0 @@
-/*
- * VMI specific paravirt-ops implementation
- *
- * Copyright (C) 2005, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to zach@...are.com
- *
- */
-
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <linux/sched.h>
-#include <asm/vmi.h>
-#include <asm/io.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/processor.h>
-#include <asm/timer.h>
-#include <asm/vmi_time.h>
-#include <asm/kmap_types.h>
-#include <asm/setup.h>
-
-/* Convenient for calling VMI functions indirectly in the ROM */
-typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
-typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int);
-
-#define call_vrom_func(rom,func) \
- (((VROMFUNC *)(rom->func))())
-
-#define call_vrom_long_func(rom,func,arg) \
- (((VROMLONGFUNC *)(rom->func)) (arg))
-
-static struct vrom_header *vmi_rom;
-static int disable_pge;
-static int disable_pse;
-static int disable_sep;
-static int disable_tsc;
-static int disable_mtrr;
-static int disable_noidle;
-static int disable_vmi_timer;
-
-/* Cached VMI operations */
-static struct {
- void (*cpuid)(void /* non-c */);
- void (*_set_ldt)(u32 selector);
- void (*set_tr)(u32 selector);
- void (*write_idt_entry)(struct desc_struct *, int, u32, u32);
- void (*write_gdt_entry)(struct desc_struct *, int, u32, u32);
- void (*write_ldt_entry)(struct desc_struct *, int, u32, u32);
- void (*set_kernel_stack)(u32 selector, u32 sp0);
- void (*allocate_page)(u32, u32, u32, u32, u32);
- void (*release_page)(u32, u32);
- void (*set_pte)(pte_t, pte_t *, unsigned);
- void (*update_pte)(pte_t *, unsigned);
- void (*set_linear_mapping)(int, void *, u32, u32);
- void (*_flush_tlb)(int);
- void (*set_initial_ap_state)(int, int);
- void (*halt)(void);
- void (*set_lazy_mode)(int mode);
-} vmi_ops;
-
-/* Cached VMI operations */
-struct vmi_timer_ops vmi_timer_ops;
-
-/*
- * VMI patching routines.
- */
-#define MNEM_CALL 0xe8
-#define MNEM_JMP 0xe9
-#define MNEM_RET 0xc3
-
-#define IRQ_PATCH_INT_MASK 0
-#define IRQ_PATCH_DISABLE 5
-
-static inline void patch_offset(void *insnbuf,
- unsigned long ip, unsigned long dest)
-{
- *(unsigned long *)(insnbuf+1) = dest-ip-5;
-}
-
-static unsigned patch_internal(int call, unsigned len, void *insnbuf,
- unsigned long ip)
-{
- u64 reloc;
- struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc;
- reloc = call_vrom_long_func(vmi_rom, get_reloc, call);
- switch(rel->type) {
- case VMI_RELOCATION_CALL_REL:
- BUG_ON(len < 5);
- *(char *)insnbuf = MNEM_CALL;
- patch_offset(insnbuf, ip, (unsigned long)rel->eip);
- return 5;
-
- case VMI_RELOCATION_JUMP_REL:
- BUG_ON(len < 5);
- *(char *)insnbuf = MNEM_JMP;
- patch_offset(insnbuf, ip, (unsigned long)rel->eip);
- return 5;
-
- case VMI_RELOCATION_NOP:
- /* obliterate the whole thing */
- return 0;
-
- case VMI_RELOCATION_NONE:
- /* leave native code in place */
- break;
-
- default:
- BUG();
- }
- return len;
-}
-
-/*
- * Apply patch if appropriate, return length of new instruction
- * sequence. The callee does nop padding for us.
- */
-static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
- unsigned long ip, unsigned len)
-{
- switch (type) {
- case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
- return patch_internal(VMI_CALL_DisableInterrupts, len,
- insns, ip);
- case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
- return patch_internal(VMI_CALL_EnableInterrupts, len,
- insns, ip);
- case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
- return patch_internal(VMI_CALL_SetInterruptMask, len,
- insns, ip);
- case PARAVIRT_PATCH(pv_irq_ops.save_fl):
- return patch_internal(VMI_CALL_GetInterruptMask, len,
- insns, ip);
- case PARAVIRT_PATCH(pv_cpu_ops.iret):
- return patch_internal(VMI_CALL_IRET, len, insns, ip);
- case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
- return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip);
- default:
- break;
- }
- return len;
-}
-
-/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */
-static void vmi_cpuid(unsigned int *ax, unsigned int *bx,
- unsigned int *cx, unsigned int *dx)
-{
- int override = 0;
- if (*ax == 1)
- override = 1;
- asm volatile ("call *%6"
- : "=a" (*ax),
- "=b" (*bx),
- "=c" (*cx),
- "=d" (*dx)
- : "0" (*ax), "2" (*cx), "r" (vmi_ops.cpuid));
- if (override) {
- if (disable_pse)
- *dx &= ~X86_FEATURE_PSE;
- if (disable_pge)
- *dx &= ~X86_FEATURE_PGE;
- if (disable_sep)
- *dx &= ~X86_FEATURE_SEP;
- if (disable_tsc)
- *dx &= ~X86_FEATURE_TSC;
- if (disable_mtrr)
- *dx &= ~X86_FEATURE_MTRR;
- }
-}
-
-static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new)
-{
- if (gdt[nr].a != new->a || gdt[nr].b != new->b)
- write_gdt_entry(gdt, nr, new, 0);
-}
-
-static void vmi_load_tls(struct thread_struct *t, unsigned int cpu)
-{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
- vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]);
- vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]);
- vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]);
-}
-
-static void vmi_set_ldt(const void *addr, unsigned entries)
-{
- unsigned cpu = smp_processor_id();
- struct desc_struct desc;
-
- pack_descriptor(&desc, (unsigned long)addr,
- entries * sizeof(struct desc_struct) - 1,
- DESC_LDT, 0);
- write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, &desc, DESC_LDT);
- vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0);
-}
-
-static void vmi_set_tr(void)
-{
- vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct));
-}
-
-static void vmi_write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
-{
- u32 *idt_entry = (u32 *)g;
- vmi_ops.write_idt_entry(dt, entry, idt_entry[0], idt_entry[1]);
-}
-
-static void vmi_write_gdt_entry(struct desc_struct *dt, int entry,
- const void *desc, int type)
-{
- u32 *gdt_entry = (u32 *)desc;
- vmi_ops.write_gdt_entry(dt, entry, gdt_entry[0], gdt_entry[1]);
-}
-
-static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
- const void *desc)
-{
- u32 *ldt_entry = (u32 *)desc;
- vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
-}
-
-static void vmi_load_sp0(struct tss_struct *tss,
- struct thread_struct *thread)
-{
- tss->x86_tss.sp0 = thread->sp0;
-
- /* This can only happen when SEP is enabled, no need to test "SEP"arately */
- if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
- tss->x86_tss.ss1 = thread->sysenter_cs;
- wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
- }
- vmi_ops.set_kernel_stack(__KERNEL_DS, tss->x86_tss.sp0);
-}
-
-static void vmi_flush_tlb_user(void)
-{
- vmi_ops._flush_tlb(VMI_FLUSH_TLB);
-}
-
-static void vmi_flush_tlb_kernel(void)
-{
- vmi_ops._flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL);
-}
-
-/* Stub to do nothing at all; used for delays and unimplemented calls */
-static void vmi_nop(void)
-{
-}
-
-#ifdef CONFIG_HIGHPTE
-static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
-{
- void *va = kmap_atomic(page, type);
-
- /*
- * Internally, the VMI ROM must map virtual addresses to physical
- * addresses for processing MMU updates. By the time MMU updates
- * are issued, this information is typically already lost.
- * Fortunately, the VMI provides a cache of mapping slots for active
- * page tables.
- *
- * We use slot zero for the linear mapping of physical memory, and
- * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
- *
- * args: SLOT VA COUNT PFN
- */
- BUG_ON(type != KM_PTE0 && type != KM_PTE1);
- vmi_ops.set_linear_mapping((type - KM_PTE0)+1, va, 1, page_to_pfn(page));
-
- return va;
-}
-#endif
-
-static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
-{
- vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
-}
-
-static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
-{
- /*
- * This call comes in very early, before mem_map is setup.
- * It is called only for swapper_pg_dir, which already has
- * data on it.
- */
- vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
-}
-
-static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
-{
- vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
-}
-
-static void vmi_release_pte(unsigned long pfn)
-{
- vmi_ops.release_page(pfn, VMI_PAGE_L1);
-}
-
-static void vmi_release_pmd(unsigned long pfn)
-{
- vmi_ops.release_page(pfn, VMI_PAGE_L2);
-}
-
-/*
- * We use the pgd_free hook for releasing the pgd page:
- */
-static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
-
- vmi_ops.release_page(pfn, VMI_PAGE_L2);
-}
-
-/*
- * Helper macros for MMU update flags. We can defer updates until a flush
- * or page invalidation only if the update is to the current address space
- * (otherwise, there is no flush). We must check against init_mm, since
- * this could be a kernel update, which usually passes init_mm, although
- * sometimes this check can be skipped if we know the particular function
- * is only called on user mode PTEs. We could change the kernel to pass
- * current->active_mm here, but in particular, I was unsure if changing
- * mm/highmem.c to do this would still be correct on other architectures.
- */
-#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \
- (!mustbeuser && (mm) == &init_mm))
-#define vmi_flags_addr(mm, addr, level, user) \
- ((level) | (is_current_as(mm, user) ? \
- (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
-#define vmi_flags_addr_defer(mm, addr, level, user) \
- ((level) | (is_current_as(mm, user) ? \
- (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
-
-static void vmi_update_pte(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_update_pte_defer(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_set_pte(pte_t *ptep, pte_t pte)
-{
- /* XXX because of set_pmd_pte, this can be called on PT or PD layers */
- vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT);
-}
-
-static void vmi_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
-{
- vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval)
-{
-#ifdef CONFIG_X86_PAE
- const pte_t pte = { .pte = pmdval.pmd };
-#else
- const pte_t pte = { pmdval.pud.pgd.pgd };
-#endif
- vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD);
-}
-
-#ifdef CONFIG_X86_PAE
-
-static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval)
-{
- /*
- * XXX This is called from set_pmd_pte, but at both PT
- * and PD layers so the VMI_PAGE_PT flag is wrong. But
- * it is only called for large page mapping changes,
- * the Xen backend, doesn't support large pages, and the
- * ESX backend doesn't depend on the flag.
- */
- set_64bit((unsigned long long *)ptep,pte_val(pteval));
- vmi_ops.update_pte(ptep, VMI_PAGE_PT);
-}
-
-static void vmi_set_pud(pud_t *pudp, pud_t pudval)
-{
- /* Um, eww */
- const pte_t pte = { .pte = pudval.pgd.pgd };
- vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP);
-}
-
-static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- const pte_t pte = { .pte = 0 };
- vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_pmd_clear(pmd_t *pmd)
-{
- const pte_t pte = { .pte = 0 };
- vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD);
-}
-#endif
-
-#ifdef CONFIG_SMP
-static void __devinit
-vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
- unsigned long start_esp)
-{
- struct vmi_ap_state ap;
-
- /* Default everything to zero. This is fine for most GPRs. */
- memset(&ap, 0, sizeof(struct vmi_ap_state));
-
- ap.gdtr_limit = GDT_SIZE - 1;
- ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid);
-
- ap.idtr_limit = IDT_ENTRIES * 8 - 1;
- ap.idtr_base = (unsigned long) idt_table;
-
- ap.ldtr = 0;
-
- ap.cs = __KERNEL_CS;
- ap.eip = (unsigned long) start_eip;
- ap.ss = __KERNEL_DS;
- ap.esp = (unsigned long) start_esp;
-
- ap.ds = __USER_DS;
- ap.es = __USER_DS;
- ap.fs = __KERNEL_PERCPU;
- ap.gs = __KERNEL_STACK_CANARY;
-
- ap.eflags = 0;
-
-#ifdef CONFIG_X86_PAE
- /* efer should match BSP efer. */
- if (cpu_has_nx) {
- unsigned l, h;
- rdmsr(MSR_EFER, l, h);
- ap.efer = (unsigned long long) h << 32 | l;
- }
-#endif
-
- ap.cr3 = __pa(swapper_pg_dir);
- /* Protected mode, paging, AM, WP, NE, MP. */
- ap.cr0 = 0x80050023;
- ap.cr4 = mmu_cr4_features;
- vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid);
-}
-#endif
-
-static void vmi_start_context_switch(struct task_struct *prev)
-{
- paravirt_start_context_switch(prev);
- vmi_ops.set_lazy_mode(2);
-}
-
-static void vmi_end_context_switch(struct task_struct *next)
-{
- vmi_ops.set_lazy_mode(0);
- paravirt_end_context_switch(next);
-}
-
-static void vmi_enter_lazy_mmu(void)
-{
- paravirt_enter_lazy_mmu();
- vmi_ops.set_lazy_mode(1);
-}
-
-static void vmi_leave_lazy_mmu(void)
-{
- vmi_ops.set_lazy_mode(0);
- paravirt_leave_lazy_mmu();
-}
-
-static inline int __init check_vmi_rom(struct vrom_header *rom)
-{
- struct pci_header *pci;
- struct pnp_header *pnp;
- const char *manufacturer = "UNKNOWN";
- const char *product = "UNKNOWN";
- const char *license = "unspecified";
-
- if (rom->rom_signature != 0xaa55)
- return 0;
- if (rom->vrom_signature != VMI_SIGNATURE)
- return 0;
- if (rom->api_version_maj != VMI_API_REV_MAJOR ||
- rom->api_version_min+1 < VMI_API_REV_MINOR+1) {
- printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n",
- rom->api_version_maj,
- rom->api_version_min);
- return 0;
- }
-
- /*
- * Relying on the VMI_SIGNATURE field is not 100% safe, so check
- * the PCI header and device type to make sure this is really a
- * VMI device.
- */
- if (!rom->pci_header_offs) {
- printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n");
- return 0;
- }
-
- pci = (struct pci_header *)((char *)rom+rom->pci_header_offs);
- if (pci->vendorID != PCI_VENDOR_ID_VMWARE ||
- pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) {
- /* Allow it to run... anyways, but warn */
- printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n");
- }
-
- if (rom->pnp_header_offs) {
- pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs);
- if (pnp->manufacturer_offset)
- manufacturer = (const char *)rom+pnp->manufacturer_offset;
- if (pnp->product_offset)
- product = (const char *)rom+pnp->product_offset;
- }
-
- if (rom->license_offs)
- license = (char *)rom+rom->license_offs;
-
- printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n",
- manufacturer, product,
- rom->api_version_maj, rom->api_version_min,
- pci->rom_version_maj, pci->rom_version_min);
-
- /* Don't allow BSD/MIT here for now because we don't want to end up
- with any binary only shim layers */
- if (strcmp(license, "GPL") && strcmp(license, "GPL v2")) {
- printk(KERN_WARNING "VMI: Non GPL license `%s' found for ROM. Not used.\n",
- license);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * Probe for the VMI option ROM
- */
-static inline int __init probe_vmi_rom(void)
-{
- unsigned long base;
-
- /* VMI ROM is in option ROM area, check signature */
- for (base = 0xC0000; base < 0xE0000; base += 2048) {
- struct vrom_header *romstart;
- romstart = (struct vrom_header *)isa_bus_to_virt(base);
- if (check_vmi_rom(romstart)) {
- vmi_rom = romstart;
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * VMI setup common to all processors
- */
-void vmi_bringup(void)
-{
- /* We must establish the lowmem mapping for MMU ops to work */
- if (vmi_ops.set_linear_mapping)
- vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
-}
-
-/*
- * Return a pointer to a VMI function or NULL if unimplemented
- */
-static void *vmi_get_function(int vmicall)
-{
- u64 reloc;
- const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
- reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall);
- BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);
- if (rel->type == VMI_RELOCATION_CALL_REL)
- return (void *)rel->eip;
- else
- return NULL;
-}
-
-/*
- * Helper macro for making the VMI paravirt-ops fill code readable.
- * For unimplemented operations, fall back to default, unless nop
- * is returned by the ROM.
- */
-#define para_fill(opname, vmicall) \
-do { \
- reloc = call_vrom_long_func(vmi_rom, get_reloc, \
- VMI_CALL_##vmicall); \
- if (rel->type == VMI_RELOCATION_CALL_REL) \
- opname = (void *)rel->eip; \
- else if (rel->type == VMI_RELOCATION_NOP) \
- opname = (void *)vmi_nop; \
- else if (rel->type != VMI_RELOCATION_NONE) \
- printk(KERN_WARNING "VMI: Unknown relocation " \
- "type %d for " #vmicall"\n",\
- rel->type); \
-} while (0)
-
-/*
- * Helper macro for making the VMI paravirt-ops fill code readable.
- * For cached operations which do not match the VMI ROM ABI and must
- * go through a tranlation stub. Ignore NOPs, since it is not clear
- * a NOP * VMI function corresponds to a NOP paravirt-op when the
- * functions are not in 1-1 correspondence.
- */
-#define para_wrap(opname, wrapper, cache, vmicall) \
-do { \
- reloc = call_vrom_long_func(vmi_rom, get_reloc, \
- VMI_CALL_##vmicall); \
- BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); \
- if (rel->type == VMI_RELOCATION_CALL_REL) { \
- opname = wrapper; \
- vmi_ops.cache = (void *)rel->eip; \
- } \
-} while (0)
-
-/*
- * Activate the VMI interface and switch into paravirtualized mode
- */
-static inline int __init activate_vmi(void)
-{
- short kernel_cs;
- u64 reloc;
- const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
-
- if (call_vrom_func(vmi_rom, vmi_init) != 0) {
- printk(KERN_ERR "VMI ROM failed to initialize!");
- return 0;
- }
- savesegment(cs, kernel_cs);
-
- pv_info.paravirt_enabled = 1;
- pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
- pv_info.name = "vmi";
-
- pv_init_ops.patch = vmi_patch;
-
- /*
- * Many of these operations are ABI compatible with VMI.
- * This means we can fill in the paravirt-ops with direct
- * pointers into the VMI ROM. If the calling convention for
- * these operations changes, this code needs to be updated.
- *
- * Exceptions
- * CPUID paravirt-op uses pointers, not the native ISA
- * halt has no VMI equivalent; all VMI halts are "safe"
- * no MSR support yet - just trap and emulate. VMI uses the
- * same ABI as the native ISA, but Linux wants exceptions
- * from bogus MSR read / write handled
- * rdpmc is not yet used in Linux
- */
-
- /* CPUID is special, so very special it gets wrapped like a present */
- para_wrap(pv_cpu_ops.cpuid, vmi_cpuid, cpuid, CPUID);
-
- para_fill(pv_cpu_ops.clts, CLTS);
- para_fill(pv_cpu_ops.get_debugreg, GetDR);
- para_fill(pv_cpu_ops.set_debugreg, SetDR);
- para_fill(pv_cpu_ops.read_cr0, GetCR0);
- para_fill(pv_mmu_ops.read_cr2, GetCR2);
- para_fill(pv_mmu_ops.read_cr3, GetCR3);
- para_fill(pv_cpu_ops.read_cr4, GetCR4);
- para_fill(pv_cpu_ops.write_cr0, SetCR0);
- para_fill(pv_mmu_ops.write_cr2, SetCR2);
- para_fill(pv_mmu_ops.write_cr3, SetCR3);
- para_fill(pv_cpu_ops.write_cr4, SetCR4);
-
- para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
- para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
- para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
- para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
-
- para_fill(pv_cpu_ops.wbinvd, WBINVD);
- para_fill(pv_cpu_ops.read_tsc, RDTSC);
-
- /* The following we emulate with trap and emulate for now */
- /* paravirt_ops.read_msr = vmi_rdmsr */
- /* paravirt_ops.write_msr = vmi_wrmsr */
- /* paravirt_ops.rdpmc = vmi_rdpmc */
-
- /* TR interface doesn't pass TR value, wrap */
- para_wrap(pv_cpu_ops.load_tr_desc, vmi_set_tr, set_tr, SetTR);
-
- /* LDT is special, too */
- para_wrap(pv_cpu_ops.set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
-
- para_fill(pv_cpu_ops.load_gdt, SetGDT);
- para_fill(pv_cpu_ops.load_idt, SetIDT);
- para_fill(pv_cpu_ops.store_gdt, GetGDT);
- para_fill(pv_cpu_ops.store_idt, GetIDT);
- para_fill(pv_cpu_ops.store_tr, GetTR);
- pv_cpu_ops.load_tls = vmi_load_tls;
- para_wrap(pv_cpu_ops.write_ldt_entry, vmi_write_ldt_entry,
- write_ldt_entry, WriteLDTEntry);
- para_wrap(pv_cpu_ops.write_gdt_entry, vmi_write_gdt_entry,
- write_gdt_entry, WriteGDTEntry);
- para_wrap(pv_cpu_ops.write_idt_entry, vmi_write_idt_entry,
- write_idt_entry, WriteIDTEntry);
- para_wrap(pv_cpu_ops.load_sp0, vmi_load_sp0, set_kernel_stack, UpdateKernelStack);
- para_fill(pv_cpu_ops.set_iopl_mask, SetIOPLMask);
- para_fill(pv_cpu_ops.io_delay, IODelay);
-
- para_wrap(pv_cpu_ops.start_context_switch, vmi_start_context_switch,
- set_lazy_mode, SetLazyMode);
- para_wrap(pv_cpu_ops.end_context_switch, vmi_end_context_switch,
- set_lazy_mode, SetLazyMode);
-
- para_wrap(pv_mmu_ops.lazy_mode.enter, vmi_enter_lazy_mmu,
- set_lazy_mode, SetLazyMode);
- para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy_mmu,
- set_lazy_mode, SetLazyMode);
-
- /* user and kernel flush are just handled with different flags to FlushTLB */
- para_wrap(pv_mmu_ops.flush_tlb_user, vmi_flush_tlb_user, _flush_tlb, FlushTLB);
- para_wrap(pv_mmu_ops.flush_tlb_kernel, vmi_flush_tlb_kernel, _flush_tlb, FlushTLB);
- para_fill(pv_mmu_ops.flush_tlb_single, InvalPage);
-
- /*
- * Until a standard flag format can be agreed on, we need to
- * implement these as wrappers in Linux. Get the VMI ROM
- * function pointers for the two backend calls.
- */
-#ifdef CONFIG_X86_PAE
- vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong);
- vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong);
-#else
- vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
- vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
-#endif
-
- if (vmi_ops.set_pte) {
- pv_mmu_ops.set_pte = vmi_set_pte;
- pv_mmu_ops.set_pte_at = vmi_set_pte_at;
- pv_mmu_ops.set_pmd = vmi_set_pmd;
-#ifdef CONFIG_X86_PAE
- pv_mmu_ops.set_pte_atomic = vmi_set_pte_atomic;
- pv_mmu_ops.set_pud = vmi_set_pud;
- pv_mmu_ops.pte_clear = vmi_pte_clear;
- pv_mmu_ops.pmd_clear = vmi_pmd_clear;
-#endif
- }
-
- if (vmi_ops.update_pte) {
- pv_mmu_ops.pte_update = vmi_update_pte;
- pv_mmu_ops.pte_update_defer = vmi_update_pte_defer;
- }
-
- vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
- if (vmi_ops.allocate_page) {
- pv_mmu_ops.alloc_pte = vmi_allocate_pte;
- pv_mmu_ops.alloc_pmd = vmi_allocate_pmd;
- pv_mmu_ops.alloc_pmd_clone = vmi_allocate_pmd_clone;
- }
-
- vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
- if (vmi_ops.release_page) {
- pv_mmu_ops.release_pte = vmi_release_pte;
- pv_mmu_ops.release_pmd = vmi_release_pmd;
- pv_mmu_ops.pgd_free = vmi_pgd_free;
- }
-
- /* Set linear is needed in all cases */
- vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-#ifdef CONFIG_HIGHPTE
- if (vmi_ops.set_linear_mapping)
- pv_mmu_ops.kmap_atomic_pte = vmi_kmap_atomic_pte;
-#endif
-
- /*
- * These MUST always be patched. Don't support indirect jumps
- * through these operations, as the VMI interface may use either
- * a jump or a call to get to these operations, depending on
- * the backend. They are performance critical anyway, so requiring
- * a patch is not a big problem.
- */
- pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
- pv_cpu_ops.iret = (void *)0xbadbab0;
-
-#ifdef CONFIG_SMP
- para_wrap(pv_apic_ops.startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
- para_fill(apic->read, APICRead);
- para_fill(apic->write, APICWrite);
-#endif
-
- /*
- * Check for VMI timer functionality by probing for a cycle frequency method
- */
- reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
- if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
- vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
- vmi_timer_ops.get_cycle_counter =
- vmi_get_function(VMI_CALL_GetCycleCounter);
- vmi_timer_ops.get_wallclock =
- vmi_get_function(VMI_CALL_GetWallclockTime);
- vmi_timer_ops.wallclock_updated =
- vmi_get_function(VMI_CALL_WallclockUpdated);
- vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
- vmi_timer_ops.cancel_alarm =
- vmi_get_function(VMI_CALL_CancelAlarm);
- x86_init.timers.timer_init = vmi_time_init;
-#ifdef CONFIG_X86_LOCAL_APIC
- x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init;
- x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
-#endif
- pv_time_ops.sched_clock = vmi_sched_clock;
- x86_platform.calibrate_tsc = vmi_tsc_khz;
- x86_platform.get_wallclock = vmi_get_wallclock;
- x86_platform.set_wallclock = vmi_set_wallclock;
-
- /* We have true wallclock functions; disable CMOS clock sync */
- no_sync_cmos_clock = 1;
- } else {
- disable_noidle = 1;
- disable_vmi_timer = 1;
- }
-
- para_fill(pv_irq_ops.safe_halt, Halt);
-
- /*
- * Alternative instruction rewriting doesn't happen soon enough
- * to convert VMI_IRET to a call instead of a jump; so we have
- * to do this before IRQs get reenabled. Fortunately, it is
- * idempotent.
- */
- apply_paravirt(__parainstructions, __parainstructions_end);
-
- vmi_bringup();
-
- return 1;
-}
-
-#undef para_fill
-
-void __init vmi_init(void)
-{
- if (!vmi_rom)
- probe_vmi_rom();
- else
- check_vmi_rom(vmi_rom);
-
- /* In case probing for or validating the ROM failed, basil */
- if (!vmi_rom)
- return;
-
- reserve_top_address(-vmi_rom->virtual_top);
-
-#ifdef CONFIG_X86_IO_APIC
- /* This is virtual hardware; timer routing is wired correctly */
- no_timer_check = 1;
-#endif
-}
-
-void __init vmi_activate(void)
-{
- unsigned long flags;
-
- if (!vmi_rom)
- return;
-
- local_irq_save(flags);
- activate_vmi();
- local_irq_restore(flags & X86_EFLAGS_IF);
-}
-
-static int __init parse_vmi(char *arg)
-{
- if (!arg)
- return -EINVAL;
-
- if (!strcmp(arg, "disable_pge")) {
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
- disable_pge = 1;
- } else if (!strcmp(arg, "disable_pse")) {
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PSE);
- disable_pse = 1;
- } else if (!strcmp(arg, "disable_sep")) {
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
- disable_sep = 1;
- } else if (!strcmp(arg, "disable_tsc")) {
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC);
- disable_tsc = 1;
- } else if (!strcmp(arg, "disable_mtrr")) {
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_MTRR);
- disable_mtrr = 1;
- } else if (!strcmp(arg, "disable_timer")) {
- disable_vmi_timer = 1;
- disable_noidle = 1;
- } else if (!strcmp(arg, "disable_noidle"))
- disable_noidle = 1;
- return 0;
-}
-
-early_param("vmi", parse_vmi);
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
deleted file mode 100644
index 611b9e2..0000000
--- a/arch/x86/kernel/vmiclock_32.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * VMI paravirtual timer support routines.
- *
- * Copyright (C) 2007, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/cpumask.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/vmi.h>
-#include <asm/vmi_time.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/timer.h>
-#include <asm/i8253.h>
-#include <asm/irq_vectors.h>
-
-#define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-
-static DEFINE_PER_CPU(struct clock_event_device, local_events);
-
-static inline u32 vmi_counter(u32 flags)
-{
- /* Given VMI_ONESHOT or VMI_PERIODIC, return the corresponding
- * cycle counter. */
- return flags & VMI_ALARM_COUNTER_MASK;
-}
-
-/* paravirt_ops.get_wallclock = vmi_get_wallclock */
-unsigned long vmi_get_wallclock(void)
-{
- unsigned long long wallclock;
- wallclock = vmi_timer_ops.get_wallclock(); // nsec
- (void)do_div(wallclock, 1000000000); // sec
-
- return wallclock;
-}
-
-/* paravirt_ops.set_wallclock = vmi_set_wallclock */
-int vmi_set_wallclock(unsigned long now)
-{
- return 0;
-}
-
-/* paravirt_ops.sched_clock = vmi_sched_clock */
-unsigned long long vmi_sched_clock(void)
-{
- return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
-}
-
-/* x86_platform.calibrate_tsc = vmi_tsc_khz */
-unsigned long vmi_tsc_khz(void)
-{
- unsigned long long khz;
- khz = vmi_timer_ops.get_cycle_frequency();
- (void)do_div(khz, 1000);
- return khz;
-}
-
-static inline unsigned int vmi_get_timer_vector(void)
-{
-#ifdef CONFIG_X86_IO_APIC
- return FIRST_DEVICE_VECTOR;
-#else
- return FIRST_EXTERNAL_VECTOR;
-#endif
-}
-
-/** vmi clockchip */
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned int startup_timer_irq(unsigned int irq)
-{
- unsigned long val = apic_read(APIC_LVTT);
- apic_write(APIC_LVTT, vmi_get_timer_vector());
-
- return (val & APIC_SEND_PENDING);
-}
-
-static void mask_timer_irq(unsigned int irq)
-{
- unsigned long val = apic_read(APIC_LVTT);
- apic_write(APIC_LVTT, val | APIC_LVT_MASKED);
-}
-
-static void unmask_timer_irq(unsigned int irq)
-{
- unsigned long val = apic_read(APIC_LVTT);
- apic_write(APIC_LVTT, val & ~APIC_LVT_MASKED);
-}
-
-static void ack_timer_irq(unsigned int irq)
-{
- ack_APIC_irq();
-}
-
-static struct irq_chip vmi_chip __read_mostly = {
- .name = "VMI-LOCAL",
- .startup = startup_timer_irq,
- .mask = mask_timer_irq,
- .unmask = unmask_timer_irq,
- .ack = ack_timer_irq
-};
-#endif
-
-/** vmi clockevent */
-#define VMI_ALARM_WIRED_IRQ0 0x00000000
-#define VMI_ALARM_WIRED_LVTT 0x00010000
-static int vmi_wiring = VMI_ALARM_WIRED_IRQ0;
-
-static inline int vmi_get_alarm_wiring(void)
-{
- return vmi_wiring;
-}
-
-static void vmi_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- cycle_t now, cycles_per_hz;
- BUG_ON(!irqs_disabled());
-
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_RESUME:
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- cycles_per_hz = vmi_timer_ops.get_cycle_frequency();
- (void)do_div(cycles_per_hz, HZ);
- now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_PERIODIC));
- vmi_timer_ops.set_alarm(VMI_PERIODIC, now, cycles_per_hz);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- switch (evt->mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- vmi_timer_ops.cancel_alarm(VMI_ONESHOT);
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- vmi_timer_ops.cancel_alarm(VMI_PERIODIC);
- break;
- default:
- break;
- }
- break;
- default:
- break;
- }
-}
-
-static int vmi_timer_next_event(unsigned long delta,
- struct clock_event_device *evt)
-{
- /* Unfortunately, set_next_event interface only passes relative
- * expiry, but we want absolute expiry. It'd be better if were
- * were passed an aboslute expiry, since a bunch of time may
- * have been stolen between the time the delta is computed and
- * when we set the alarm below. */
- cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
-
- BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
- vmi_timer_ops.set_alarm(VMI_ONESHOT, now + delta, 0);
- return 0;
-}
-
-static struct clock_event_device vmi_clockevent = {
- .name = "vmi-timer",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .shift = 22,
- .set_mode = vmi_timer_set_mode,
- .set_next_event = vmi_timer_next_event,
- .rating = 1000,
- .irq = 0,
-};
-
-static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &__get_cpu_var(local_events);
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction vmi_clock_action = {
- .name = "vmi-timer",
- .handler = vmi_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
-};
-
-static void __devinit vmi_time_init_clockevent(void)
-{
- cycle_t cycles_per_msec;
- struct clock_event_device *evt;
-
- int cpu = smp_processor_id();
- evt = &__get_cpu_var(local_events);
-
- /* Use cycles_per_msec since div_sc params are 32-bits. */
- cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
- (void)do_div(cycles_per_msec, 1000);
-
- memcpy(evt, &vmi_clockevent, sizeof(*evt));
- /* Must pick .shift such that .mult fits in 32-bits. Choosing
- * .shift to be 22 allows 2^(32-22) cycles per nano-seconds
- * before overflow. */
- evt->mult = div_sc(cycles_per_msec, NSEC_PER_MSEC, evt->shift);
- /* Upper bound is clockevent's use of ulong for cycle deltas. */
- evt->max_delta_ns = clockevent_delta2ns(ULONG_MAX, evt);
- evt->min_delta_ns = clockevent_delta2ns(1, evt);
- evt->cpumask = cpumask_of(cpu);
-
- printk(KERN_WARNING "vmi: registering clock event %s. mult=%lu shift=%u\n",
- evt->name, evt->mult, evt->shift);
- clockevents_register_device(evt);
-}
-
-void __init vmi_time_init(void)
-{
- unsigned int cpu;
- /* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
- outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
-
- vmi_time_init_clockevent();
- setup_irq(0, &vmi_clock_action);
- for_each_possible_cpu(cpu)
- per_cpu(vector_irq, cpu)[vmi_get_timer_vector()] = 0;
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-void __devinit vmi_time_bsp_init(void)
-{
- /*
- * On APIC systems, we want local timers to fire on each cpu. We do
- * this by programming LVTT to deliver timer events to the IRQ handler
- * for IRQ-0, since we can't re-use the APIC local timer handler
- * without interfering with that code.
- */
- clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
- local_irq_disable();
-#ifdef CONFIG_SMP
- /*
- * XXX handle_percpu_irq only defined for SMP; we need to switch over
- * to using it, since this is a local interrupt, which each CPU must
- * handle individually without locking out or dropping simultaneous
- * local timers on other CPUs. We also don't want to trigger the
- * quirk workaround code for interrupts which gets invoked from
- * handle_percpu_irq via eoi, so we use our own IRQ chip.
- */
- set_irq_chip_and_handler_name(0, &vmi_chip, handle_percpu_irq, "lvtt");
-#else
- set_irq_chip_and_handler_name(0, &vmi_chip, handle_edge_irq, "lvtt");
-#endif
- vmi_wiring = VMI_ALARM_WIRED_LVTT;
- apic_write(APIC_LVTT, vmi_get_timer_vector());
- local_irq_enable();
- clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
-}
-
-void __devinit vmi_time_ap_init(void)
-{
- vmi_time_init_clockevent();
- apic_write(APIC_LVTT, vmi_get_timer_vector());
-}
-#endif
-
-/** vmi clocksource */
-static struct clocksource clocksource_vmi;
-
-static cycle_t read_real_cycles(struct clocksource *cs)
-{
- cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
- return max(ret, clocksource_vmi.cycle_last);
-}
-
-static struct clocksource clocksource_vmi = {
- .name = "vmi-timer",
- .rating = 450,
- .read = read_real_cycles,
- .mask = CLOCKSOURCE_MASK(64),
- .mult = 0, /* to be set */
- .shift = 22,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_vmi_clocksource(void)
-{
- cycle_t cycles_per_msec;
-
- if (!vmi_timer_ops.get_cycle_frequency)
- return 0;
- /* Use khz2mult rather than hz2mult since hz arg is only 32-bits. */
- cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
- (void)do_div(cycles_per_msec, 1000);
-
- /* Note that clocksource.{mult, shift} converts in the opposite direction
- * as clockevents. */
- clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec,
- clocksource_vmi.shift);
-
- printk(KERN_WARNING "vmi: registering clock source khz=%lld\n", cycles_per_msec);
- return clocksource_register(&clocksource_vmi);
-
-}
-module_init(init_vmi_clocksource);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists