| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091113192412.GY15157@caffeine.csclub.uwaterloo.ca>
Date: Fri, 13 Nov 2009 19:24:12 +0000
From: lsorense@...lub.uwaterloo.ca (Lennart Sorensen)
To: Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: Lennart Sorensen <lsorense@...lub.uwaterloo.ca>,
Pavel Machek <pavel@....cz>, "H. Peter Anvin" <hpa@...or.com>,
Matteo Croce <technoboy85@...il.com>,
Ingo Molnar <mingo@...e.hu>, linux-kernel@...r.kernel.org
Subject: Re: i686 quirk for AMD Geode
On Fri, Nov 13, 2009 at 04:57:30PM +0000, Alan Cox wrote:
> O> Calling memcpy_toio on the Geode SC1200 on anything larger than 1 byte
> > causes the data to be delivered (at least on the PCI bus) reordered in
> > that very consistent manner.
>
> Sounds like you or your firmware have the caching and write combining
> misconfigured.
Well I can't wouch for the firmware, and unfortunately without knowing
what address the firmware placed the configuration registers at there
is no way for me to check the settings.
> > The alignment doesn't affect it (I tested that). Simply doing more than
> > 1 byte at a time with memcpy_toio to the pci device messes up.
>
> Which usually means some form of write gathering is enabled or something
> thinks the device is write combining on the PCI bus. What does the PCI
> bus and the RCRR MTRR set look like ?
Well there is no /proc/mtrr.
Here is lspci -vvx output. It is device 01:08.
00:00.0 Host bridge: Cyrix Corporation PCI Master
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00: 78 10 01 00 07 00 80 22 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at f800 [size=256]
Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 03 00 90 02 10 00 00 02 00 40 00 00
10: 01 f8 00 00 00 00 00 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 20 40
00:11.0 PCI bridge: Hint Corp Unknown device 0031 (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0100000-e01fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c03fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] Vital Product Data
00: 88 33 31 00 07 00 b0 02 01 00 04 06 08 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 d1 d1 a0 02
20: 10 e0 10 e0 01 c0 31 c0 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 ff 00 00 00
00:12.0 ISA bridge: National Semiconductor Corporation SCx200 Bridge
Subsystem: National Semiconductor Corporation SCx200 Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Region 0: I/O ports at 6400 [size=64]
Region 1: I/O ports at 6600 [size=64]
00: 0b 10 00 05 0f 00 80 02 00 00 01 06 08 00 80 00
10: 01 64 00 00 01 66 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0b 10 00 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.1 Bridge: National Semiconductor Corporation SCx200 SMI
Subsystem: National Semiconductor Corporation SCx200 SMI
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 6000 [size=256]
00: 0b 10 01 05 01 00 80 02 00 00 80 06 00 00 00 00
10: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0b 10 01 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01) (prog-if 80 [Master])
Subsystem: National Semiconductor Corporation SCx200 IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at fc00 [size=16]
00: 0b 10 02 05 05 00 80 02 01 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 0b 10 02 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.3 Multimedia audio controller: National Semiconductor Corporation SCx200 Audio
Subsystem: National Semiconductor Corporation SCx200 Audio
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at 40011000 (32-bit, non-prefetchable) [size=4K]
00: 0b 10 03 05 06 00 80 02 00 00 01 04 00 00 00 00
10: 00 10 01 40 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0b 10 03 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.4 VGA compatible controller: National Semiconductor Corporation SCx200 Video (rev 01) (prog-if 00 [VGA])
Subsystem: National Semiconductor Corporation SCx200 Video
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at 40800000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at 40010000 (32-bit, non-prefetchable) [size=4K]
Region 2: Memory at e0004000 (32-bit, non-prefetchable) [size=4K]
00: 0b 10 04 05 02 00 80 02 01 00 00 03 00 00 00 00
10: 00 00 80 40 00 00 01 40 00 40 00 e0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0b 10 04 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 fe 03 00 00
00:12.5 Bridge: National Semiconductor Corporation SCx200 XBus
Subsystem: National Semiconductor Corporation SCx200 XBus
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: I/O ports at 6200 [size=64]
00: 0b 10 05 05 03 00 80 02 00 00 80 06 00 00 00 00
10: 01 62 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 0b 10 05 05
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller: Compaq Computer Corporation ZFMicro Chipset USB (rev 08) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation ZFMicro Chipset USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0005000 (32-bit, non-prefetchable) [size=4K]
00: 11 0e f8 a0 07 00 80 02 08 10 03 0c 08 00 00 00
10: 00 50 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e f8 a0
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 50
01:04.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (6000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=32]
Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c0000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 22 10 00 20 07 00 90 02 36 00 00 02 00 40 00 00
10: 01 dc 00 00 00 00 10 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 ff 40 00 00 00 00 00 00 00 0b 01 18 18
01:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 36)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (6000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=32]
Region 1: Memory at e0100020 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c0100000 [disabled] [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 22 10 00 20 07 00 90 02 36 00 00 02 00 40 00 00
10: 01 d8 00 00 20 00 10 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 ff 40 00 00 00 00 00 00 00 0a 01 18 18
01:06.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 36)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=32]
Region 1: Memory at e0100040 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c0200000 [disabled] [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 22 10 00 20 03 00 90 02 36 00 00 02 00 40 00 00
10: 01 d4 00 00 40 00 10 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 ff 40 00 00 00 00 00 00 00 0b 01 18 18
01:07.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 36)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=32]
Region 1: Memory at e0100060 (32-bit, non-prefetchable) [size=32]
Expansion ROM at c0300000 [disabled] [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 22 10 00 20 03 00 90 02 36 00 00 02 00 40 00 00
10: 01 d0 00 00 60 00 10 e0 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 ff 40 00 00 00 00 00 00 00 0a 01 18 18
01:08.0 Serial controller: Unknown device 5243:0001 (rev 04) (prog-if 02 [16550])
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0100800 (32-bit, non-prefetchable) [size=2K]
00: 43 52 01 00 02 00 80 00 04 02 00 07 00 00 00 00
10: 00 08 10 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
01:09.0 Network controller: Sangoma Technologies Corp. A104u Quad T1/E1 AFT
Subsystem: Unknown device a013:1400
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 3750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e0110000 (32-bit, non-prefetchable) [size=64K]
00: 23 19 00 04 06 00 00 02 00 00 80 02 00 40 00 00
10: 00 00 11 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 13 a0 00 14
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 05 0f
Anything else I can grab that might give a clue?
--
Len Sorensen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists