| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20091119025329.GV29266@atomide.com>
Date: Wed, 18 Nov 2009 18:53:30 -0800
From: Tony Lindgren <tony@...mide.com>
To: Stephen Rothwell <sfr@...b.auug.org.au>
Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>,
linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Kalle Valo <kalle.valo@...ia.com>, linux-omap@...r.kernel.org,
Jani Nikula <ext-jani.1.nikula@...ia.com>
Subject: Re: linux-next: manual merge of the input tree with the omap tree
* Stephen Rothwell <sfr@...b.auug.org.au> [091118 18:11]:
> Hi Dmitry,
>
> Today's linux-next merge of the input tree got a conflict in
> arch/arm/mach-omap2/board-rx51-peripherals.c between commit
> ebff0472f451a07fae9f4e72bdc2af4c52ebb682 ("omap3: rx51: Add wl1251 wlan
> driver support") from the omap tree and commit
> 5018461a887d58f4601207deeebb7c352c2da20a ("ARM OMAP3: RX-51 board - add
> initialization of gpio keys") from the input tree.
>
> Just overlapping additions. I fixed it up (see below) and can carry the
> fix as necessary.
Thanks again for dealing with these merge conflicts again Stephen!
I've cherry picked 765af10de6d93820def9978c53ed828e4d3bd4f4 from Dmitry's
tree to keep things compiling. Then I've added a modified version of
5018461a887d58f4601207deeebb7c352c2da20a to omap for-next branch.
Dmitry, could you please drop 5018461a887d58f4601207deeebb7c352c2da20a from
your tree now?
Because of us moving the omap headers from mach to plat, there will be a
conflict otherwise. Sorry for all the hassles with this merge window, this
should be an issue for this merge window only.
Regards,
Tony
> --
> Cheers,
> Stephen Rothwell sfr@...b.auug.org.au
>
> diff --cc arch/arm/mach-omap2/board-rx51-peripherals.c
> index caaeadc,a5c02a4..0000000
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@@ -21,53 -20,103 +21,134 @@@
> #include <linux/delay.h>
> #include <linux/regulator/machine.h>
> #include <linux/gpio.h>
> + #include <linux/gpio_keys.h>
> #include <linux/mmc/host.h>
>
> -#include <mach/mcspi.h>
> -#include <mach/mux.h>
> -#include <mach/board.h>
> -#include <mach/common.h>
> -#include <mach/dma.h>
> -#include <mach/gpmc.h>
> -#include <mach/onenand.h>
> -#include <mach/gpmc-smc91x.h>
> +#include <plat/mcspi.h>
> +#include <plat/mux.h>
> +#include <plat/board.h>
> +#include <plat/common.h>
> +#include <plat/dma.h>
> +#include <plat/gpmc.h>
> +#include <plat/onenand.h>
> +#include <plat/gpmc-smc91x.h>
>
> #include "mmc-twl4030.h"
>
> #define SYSTEM_REV_B_USES_VAUX3 0x1699
> #define SYSTEM_REV_S_USES_VAUX3 0x8
>
> +#define RX51_WL1251_POWER_GPIO 87
> +#define RX51_WL1251_IRQ_GPIO 42
> +
> +static void rx51_wl1251_set_power(bool enable);
> +
> +static struct wl12xx_platform_data wl1251_pdata = {
> + .set_power = rx51_wl1251_set_power,
> +};
> +
> +static struct omap2_mcspi_device_config wl1251_mcspi_config = {
> + .turbo_mode = 0,
> + .single_channel = 1,
> +};
> +
> +/* list all spi devices here */
> +enum {
> + RX51_SPI_WL1251,
> +};
> +
> +static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
> + [RX51_SPI_WL1251] = {
> + .modalias = "wl1251",
> + .bus_num = 4,
> + .chip_select = 0,
> + .max_speed_hz = 48000000,
> + .mode = SPI_MODE_2,
> + .controller_data = &wl1251_mcspi_config,
> + .platform_data = &wl1251_pdata,
> + },
> +};
> +
> + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
> +
> + #define RX51_GPIO_CAMERA_LENS_COVER 110
> + #define RX51_GPIO_CAMERA_FOCUS 68
> + #define RX51_GPIO_CAMERA_CAPTURE 69
> + #define RX51_GPIO_KEYPAD_SLIDE 71
> + #define RX51_GPIO_LOCK_BUTTON 113
> + #define RX51_GPIO_PROXIMITY 89
> +
> + #define RX51_GPIO_DEBOUNCE_TIMEOUT 10
> +
> + static struct gpio_keys_button rx51_gpio_keys[] = {
> + {
> + .desc = "Camera Lens Cover",
> + .type = EV_SW,
> + .code = SW_CAMERA_LENS_COVER,
> + .gpio = RX51_GPIO_CAMERA_LENS_COVER,
> + .active_low = 1,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }, {
> + .desc = "Camera Focus",
> + .type = EV_KEY,
> + .code = KEY_CAMERA_FOCUS,
> + .gpio = RX51_GPIO_CAMERA_FOCUS,
> + .active_low = 1,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }, {
> + .desc = "Camera Capture",
> + .type = EV_KEY,
> + .code = KEY_CAMERA,
> + .gpio = RX51_GPIO_CAMERA_CAPTURE,
> + .active_low = 1,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }, {
> + .desc = "Lock Button",
> + .type = EV_KEY,
> + .code = KEY_SCREENLOCK,
> + .gpio = RX51_GPIO_LOCK_BUTTON,
> + .active_low = 1,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }, {
> + .desc = "Keypad Slide",
> + .type = EV_SW,
> + .code = SW_KEYPAD_SLIDE,
> + .gpio = RX51_GPIO_KEYPAD_SLIDE,
> + .active_low = 1,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }, {
> + .desc = "Proximity Sensor",
> + .type = EV_SW,
> + .code = SW_FRONT_PROXIMITY,
> + .gpio = RX51_GPIO_PROXIMITY,
> + .active_low = 0,
> + .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT,
> + }
> + };
> +
> + static struct gpio_keys_platform_data rx51_gpio_keys_data = {
> + .buttons = rx51_gpio_keys,
> + .nbuttons = ARRAY_SIZE(rx51_gpio_keys),
> + };
> +
> + static struct platform_device rx51_gpio_keys_device = {
> + .name = "gpio-keys",
> + .id = -1,
> + .dev = {
> + .platform_data = &rx51_gpio_keys_data,
> + },
> + };
> +
> + static void __init rx51_add_gpio_keys(void)
> + {
> + platform_device_register(&rx51_gpio_keys_device);
> + }
> + #else
> + static void __init rx51_add_gpio_keys(void)
> + {
> + }
> + #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
> +
> static int board_keymap[] = {
> KEY(0, 0, KEY_Q),
> KEY(0, 1, KEY_O),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists