| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200911191910.44609.bzolnier@gmail.com>
Date: Thu, 19 Nov 2009 19:10:44 +0100
From: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
To: Jeff Garzik <jgarzik@...ox.com>
Cc: linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] pata_hpt37x: add proper cable detection methods
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@...il.com>
---
drivers/ata/pata_hpt37x.c | 86 +++++++++++++++++++++++++++++-----------------
1 file changed, 56 insertions(+), 30 deletions(-)
Index: b/drivers/ata/pata_hpt37x.c
===================================================================
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -303,6 +303,59 @@ static unsigned long hpt370a_filter(stru
}
/**
+ * hpt37x_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
+ *
+ * Return the cable type attached to this port
+ */
+
+static int hpt37x_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 scr2, ata66;
+
+ pci_read_config_byte(pdev, 0x5B, &scr2);
+ pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+ /* Cable register now active */
+ pci_read_config_byte(pdev, 0x5A, &ata66);
+ /* Restore state */
+ pci_write_config_byte(pdev, 0x5B, scr2);
+
+ if (ata66 & (2 >> ap->port_no))
+ return ATA_CBL_PATA40;
+ else
+ return ATA_CBL_PATA80;
+}
+
+/**
+ * hpt374_fn1_cable_detect - Detect the cable type
+ * @ap: ATA port to detect on
+ *
+ * Return the cable type attached to this port
+ */
+
+static int hpt374_fn1_cable_detect(struct ata_port *ap)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ unsigned int mcrbase = 0x50 + 4 * ap->port_no;
+ u16 mcr3;
+ u8 ata66;
+
+ /* Do the extra channel work */
+ pci_read_config_word(pdev, mcrbase + 2, &mcr3);
+ /* Set bit 15 of 0x52 to enable TCBLID as input */
+ pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
+ pci_read_config_byte(pdev, 0x5A, &ata66);
+ /* Reset TCBLID/FCBLID to output */
+ pci_write_config_word(pdev, mcrbase + 2, mcr3);
+
+ if (ata66 & (2 >> ap->port_no))
+ return ATA_CBL_PATA40;
+ else
+ return ATA_CBL_PATA80;
+}
+
+/**
* hpt37x_pre_reset - reset the hpt37x bus
* @link: ATA link to reset
* @deadline: deadline jiffies for the operation
@@ -312,7 +365,6 @@ static unsigned long hpt370a_filter(stru
static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
{
- u8 scr2, ata66;
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
static const struct pci_bits hpt37x_enable_bits[] = {
@@ -322,18 +374,6 @@ static int hpt37x_pre_reset(struct ata_l
if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
return -ENOENT;
- pci_read_config_byte(pdev, 0x5B, &scr2);
- pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
- /* Cable register now active */
- pci_read_config_byte(pdev, 0x5A, &ata66);
- /* Restore state */
- pci_write_config_byte(pdev, 0x5B, scr2);
-
- if (ata66 & (2 >> ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
-
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
@@ -347,29 +387,12 @@ static int hpt374_fn1_pre_reset(struct a
{ 0x50, 1, 0x04, 0x04 },
{ 0x54, 1, 0x04, 0x04 }
};
- u16 mcr3;
- u8 ata66;
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- unsigned int mcrbase = 0x50 + 4 * ap->port_no;
if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
return -ENOENT;
- /* Do the extra channel work */
- pci_read_config_word(pdev, mcrbase + 2, &mcr3);
- /* Set bit 15 of 0x52 to enable TCBLID as input
- */
- pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
- pci_read_config_byte(pdev, 0x5A, &ata66);
- /* Reset TCBLID/FCBLID to output */
- pci_write_config_word(pdev, mcrbase + 2, mcr3);
-
- if (ata66 & (2 >> ap->port_no))
- ap->cbl = ATA_CBL_PATA40;
- else
- ap->cbl = ATA_CBL_PATA80;
-
/* Reset the state machine */
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
@@ -584,6 +607,7 @@ static struct ata_port_operations hpt370
.bmdma_stop = hpt370_bmdma_stop,
.mode_filter = hpt370_filter,
+ .cable_detect = hpt37x_cable_detect,
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.prereset = hpt37x_pre_reset,
@@ -608,6 +632,7 @@ static struct ata_port_operations hpt372
.bmdma_stop = hpt37x_bmdma_stop,
+ .cable_detect = hpt37x_cable_detect,
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.prereset = hpt37x_pre_reset,
@@ -620,6 +645,7 @@ static struct ata_port_operations hpt372
static struct ata_port_operations hpt374_fn1_port_ops = {
.inherits = &hpt372_port_ops,
+ .cable_detect = hpt374_fn1_cable_detect,
.prereset = hpt374_fn1_pre_reset,
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists