| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Dec 2009 12:09:11 -0500
From: "H Hartley Sweeten" <hartleys@...ionengravers.com>
To: "kernel list" <linux-kernel@...r.kernel.org>,
"Nick M." <nickm@...ionengravers.com>
Cc: "Lennert Buytenhek" <kernel@...tstofly.org>,
"David Miller" <davem@...emloft.net>
Subject: [PATCH] ep93xx_eth.c: general cleanup
General cleanup of the ep93xx_eth driver.
1) Use pr_fmt() to prefix the module name and __func__ to the error
messages.
2) <linux/io.h> instead of <asm/io.h>
3) <mach/hardware.h> instead of <mach/ep93xx-regs.h> and <mach/platform.h>
4) Remove the DRV_MODULE_NAME and DRV_MODULE_VERSION defines and just use
the raw string data in ep93xx_get_drvinfo().
5) Move the ep93xx_mdio_read (and ep93xx_mdio_write) function to eliminate
the function prototype.
6) Change all the printk(<level> messages to pr_<level> and remove the
__func__ argument.
7) Use %pM to print the MAC address at the end of the probe.
8) Use dev->dev_addr not data->dev_addr for the MAC argument because a
random address could be used if the platform does not supply one.
9) Remove unnecessary noise in ep93xx_eth_init_module().
The message at the end of the probe is left as a printk since it displays
cleaner without the function name that would be displayed with pr_info().
Signed-off-by: H Hartley Sweeten <hsweeten@...ionengravers.com>
Cc: Lennert Buytenhek <kernel@...tstofly.org>
Cc: David S. Miller <davem@...emloft.net>
---
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index b25467a..8955850 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -9,6 +9,8 @@
* (at your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
+
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -20,12 +22,9 @@
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <mach/ep93xx-regs.h>
-#include <mach/platform.h>
-#include <asm/io.h>
+#include <linux/io.h>
-#define DRV_MODULE_NAME "ep93xx-eth"
-#define DRV_MODULE_VERSION "0.1"
+#include <mach/hardware.h>
#define RX_QUEUE_ENTRIES 64
#define TX_QUEUE_ENTRIES 8
@@ -185,7 +184,47 @@ struct ep93xx_priv
#define wrw(ep, off, val) __raw_writew((val), (ep)->base_addr + (off))
#define wrl(ep, off, val) __raw_writel((val), (ep)->base_addr + (off))
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg);
+static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+ struct ep93xx_priv *ep = netdev_priv(dev);
+ int data;
+ int i;
+
+ wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
+
+ for (i = 0; i < 10; i++) {
+ if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+ break;
+ msleep(1);
+ }
+
+ if (i == 10) {
+ pr_info("mdio read timed out\n");
+ data = 0xffff;
+ } else {
+ data = rdl(ep, REG_MIIDATA);
+ }
+
+ return data;
+}
+
+static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
+{
+ struct ep93xx_priv *ep = netdev_priv(dev);
+ int i;
+
+ wrl(ep, REG_MIIDATA, data);
+ wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
+
+ for (i = 0; i < 10; i++) {
+ if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
+ break;
+ msleep(1);
+ }
+
+ if (i == 10)
+ pr_info("mdio write timed out\n");
+}
static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
{
@@ -217,14 +256,11 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
rstat->rstat1 = 0;
if (!(rstat0 & RSTAT0_EOF))
- printk(KERN_CRIT "ep93xx_rx: not end-of-frame "
- " %.8x %.8x\n", rstat0, rstat1);
+ pr_crit("not end-of-frame %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_EOB))
- printk(KERN_CRIT "ep93xx_rx: not end-of-buffer "
- " %.8x %.8x\n", rstat0, rstat1);
+ pr_crit("not end-of-buffer %.8x %.8x\n", rstat0, rstat1);
if ((rstat1 & RSTAT1_BUFFER_INDEX) >> 16 != entry)
- printk(KERN_CRIT "ep93xx_rx: entry mismatch "
- " %.8x %.8x\n", rstat0, rstat1);
+ pr_crit("entry mismatch %.8x %.8x\n", rstat0, rstat1);
if (!(rstat0 & RSTAT0_RWE)) {
ep->stats.rx_errors++;
@@ -241,8 +277,7 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
length = rstat1 & RSTAT1_FRAME_LENGTH;
if (length > MAX_PKT_SIZE) {
- printk(KERN_NOTICE "ep93xx_rx: invalid length "
- " %.8x %.8x\n", rstat0, rstat1);
+ pr_notice("invalid length %.8x %.8x\n", rstat0, rstat1);
goto err;
}
@@ -371,11 +406,9 @@ static void ep93xx_tx_complete(struct net_device *dev)
tstat->tstat0 = 0;
if (tstat0 & TSTAT0_FA)
- printk(KERN_CRIT "ep93xx_tx_complete: frame aborted "
- " %.8x\n", tstat0);
+ pr_crit("frame aborted %.8x\n", tstat0);
if ((tstat0 & TSTAT0_BUFFER_INDEX) != entry)
- printk(KERN_CRIT "ep93xx_tx_complete: entry mismatch "
- " %.8x\n", tstat0);
+ pr_crit("entry mismatch %.8x\n", tstat0);
if (tstat0 & TSTAT0_TXWE) {
int length = ep->descs->tdesc[entry].tdesc1 & 0xfff;
@@ -536,7 +569,7 @@ static int ep93xx_start_hw(struct net_device *dev)
}
if (i == 10) {
- printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to reset\n");
+ pr_crit("hw failed to reset\n");
return 1;
}
@@ -581,7 +614,7 @@ static int ep93xx_start_hw(struct net_device *dev)
}
if (i == 10) {
- printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to start\n");
+ pr_crit("hw failed to start\n");
return 1;
}
@@ -617,7 +650,7 @@ static void ep93xx_stop_hw(struct net_device *dev)
}
if (i == 10)
- printk(KERN_CRIT DRV_MODULE_NAME ": hw failed to reset\n");
+ pr_crit("hw failed to reset\n");
}
static int ep93xx_open(struct net_device *dev)
@@ -681,52 +714,10 @@ static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
}
-static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
-{
- struct ep93xx_priv *ep = netdev_priv(dev);
- int data;
- int i;
-
- wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
-
- for (i = 0; i < 10; i++) {
- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
- break;
- msleep(1);
- }
-
- if (i == 10) {
- printk(KERN_INFO DRV_MODULE_NAME ": mdio read timed out\n");
- data = 0xffff;
- } else {
- data = rdl(ep, REG_MIIDATA);
- }
-
- return data;
-}
-
-static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
-{
- struct ep93xx_priv *ep = netdev_priv(dev);
- int i;
-
- wrl(ep, REG_MIIDATA, data);
- wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
-
- for (i = 0; i < 10; i++) {
- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
- break;
- msleep(1);
- }
-
- if (i == 10)
- printk(KERN_INFO DRV_MODULE_NAME ": mdio write timed out\n");
-}
-
static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- strcpy(info->driver, DRV_MODULE_NAME);
- strcpy(info->version, DRV_MODULE_VERSION);
+ strcpy(info->driver, "ep93xx-eth");
+ strcpy(info->version, "0.1");
}
static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
@@ -877,11 +868,8 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
goto err_out;
}
- printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, "
- "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
- ep->irq, data->dev_addr[0], data->dev_addr[1],
- data->dev_addr[2], data->dev_addr[3],
- data->dev_addr[4], data->dev_addr[5]);
+ printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, %pM\n",
+ dev->name, ep->irq, dev->dev_addr);
return 0;
@@ -902,7 +890,6 @@ static struct platform_driver ep93xx_eth_driver = {
static int __init ep93xx_eth_init_module(void)
{
- printk(KERN_INFO DRV_MODULE_NAME " version " DRV_MODULE_VERSION " loading\n");
return platform_driver_register(&ep93xx_eth_driver);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists