| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201002150018.21417.rjw@sisk.pl> Date: Mon, 15 Feb 2010 00:18:21 +0100 From: "Rafael J. Wysocki" <rjw@...k.pl> To: Meelis Roos <mroos@...ee> Cc: Linux Kernel list <linux-kernel@...r.kernel.org>, "H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...e.hu> Subject: Re: 2.6.33-rc8 regression: irq11: nobody cared, during yenta registration On Sunday 14 February 2010, Meelis Roos wrote: > Just tried 2.6.33-rcx8 on my laptop (Thinkpad X20 in a dock) that was > last running 2.6.33-rc5 without problems. Gor irq11: nobody carec like > below. Seems to be repeatabale. lspci also below. I have created the Bugzilla entry at http://bugzilla.kernel.org/show_bug.cgi?id=15307 for your report. Peter, Ingo, did we do anything to the interrupt handling between .33-rc5 and .33-rc8? Thanks, Rafael > Linux version 2.6.33-rc8 (mroos@...p) (gcc version 4.4.3 (Debian 4.4.3-2) ) #1 Sun Feb 14 10:37:28 EET 2010 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000dd000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) > BIOS-e820: 0000000013ff0000 - 0000000013ffec00 (ACPI data) > BIOS-e820: 0000000013ffec00 - 0000000014000000 (ACPI NVS) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! > DMI 2.3 present. > last_pfn = 0x13ff0 max_arch_pfn = 0x100000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-BFFFF uncachable > C0000-CFFFF write-protect > D0000-DFFFF uncachable > E0000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 000000000 mask FF0000000 write-back > 1 base 010000000 mask FFC000000 write-back > 2 disabled > 3 disabled > 4 disabled > 5 disabled > 6 disabled > 7 disabled > PAT not supported by CPU. > initial memory mapped : 0 - 01800000 > init_memory_mapping: 0000000000000000-0000000013ff0000 > 0000000000 - 0000400000 page 4k > 0000400000 - 0013c00000 page 2M > 0013c00000 - 0013ff0000 page 4k > kernel direct mapping tables up to 13ff0000 @ 7000-c000 > RAMDISK: 0ec57000 - 0f033f82 > ACPI: RSDP 000f6ec0 00014 (v00 PTLTD ) > ACPI: RSDT 13ff5c49 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) > ACPI: FACP 13ffeb65 00074 (v01 IBM TP-X21 06040000 00000000) > ACPI: DSDT 13ff5c75 08EF0 (v01 IBM TP-X21 06040000 MSFT 0100000C) > ACPI: FACS 13fff000 00040 > ACPI: BOOT 13ffebd9 00027 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) > 319MB LOWMEM available. > mapped low ram: 0 - 13ff0000 > low ram: 0 - 13ff0000 > node 0 low ram: 00000000 - 13ff0000 > node 0 bootmap 00008000 - 0000a800 > (8 early reservations) ==> bootmem [0000000000 - 0013ff0000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0001000000 - 00013bf0c0] TEXT DATA BSS ==> [0001000000 - 00013bf0c0] > #2 [000ec57000 - 000f033f82] RAMDISK ==> [000ec57000 - 000f033f82] > #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] > #4 [00013c0000 - 00013c60d9] BRK ==> [00013c0000 - 00013c60d9] > #5 [0000001000 - 0000005000] ACPI WAKEUP ==> [0000001000 - 0000005000] > #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] > #7 [0000008000 - 000000b000] BOOTMAP ==> [0000008000 - 000000b000] > Zone PFN ranges: > DMA 0x00000000 -> 0x00001000 > Normal 0x00001000 -> 0x00013ff0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000000 -> 0x0000009f > 0: 0x00000100 -> 0x00013ff0 > On node 0 totalpages: 81807 > free_area_init_node: node 0, pgdat c1335e60, node_mem_map c13c7000 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3967 pages, LIFO batch:0 > Normal zone: 608 pages used for memmap > Normal zone: 77200 pages, LIFO batch:15 > ACPI: PM-Timer IO Port: 0x1008 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000dd000 > PM: Registered nosave memory: 00000000000dd000 - 0000000000100000 > Allocating PCI resources starting at 14000000 (gap: 14000000:ebf80000) > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81167 > Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-rc8 root=UUID=5a228fa1-6850-44bc-9b37-73af4d751e16 ro resume=/dev/sda2 > PID hash table entries: 2048 (order: 1, 8192 bytes) > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > Memory: 316132k/327616k available (2384k kernel code, 10804k reserved, 918k data, 272k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) > vmalloc : 0xd47f0000 - 0xfffe3000 ( 695 MB) > lowmem : 0xc0000000 - 0xd3ff0000 ( 319 MB) > .init : 0xc133a000 - 0xc137e000 ( 272 kB) > .data : 0xc12540eb - 0xc1339a04 ( 918 kB) > .text : 0xc1000000 - 0xc12540eb (2384 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > NR_IRQS:16 > CPU 0 irqstacks, hard=c130e000 soft=c130f000 > Console: colour VGA+ 80x25 > console [tty0] enabled > Fast TSC calibration using PIT > Detected 597.475 MHz processor. > Calibrating delay loop (skipped), value calculated using timer frequency.. 1194.95 BogoMIPS (lpj=5974750) > Security Framework initialized > Mount-cache hash table entries: 512 > Performance Events: > no APIC, boot with the "lapic" boot parameter to force-enable it. > no hardware sampling interrupt available. > p6 PMU driver. > ... version: 0 > ... bit width: 32 > ... generic registers: 2 > ... value mask: 00000000ffffffff > ... max period: 000000007fffffff > ... fixed-purpose events: 0 > ... event mask: 0000000000000003 > CPU: Intel Pentium III (Coppermine) stepping 03 > Checking 'hlt' instruction... OK. > ACPI: Core revision 20091214 > ACPI: setting ELCR to 0200 (from 0e20) > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14 > PCI: Using configuration type 1 for base access > bio: create slab <bio-0> at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using PIC for interrupt routing > ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 > ACPI: Power Resource [PSIO] (on) > ACPI: Power Resource [PSER] (off) > ACPI: ACPI Dock Station Driver: 2 docks/bays found > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them > pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) > pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) > pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) > pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) > pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) > pci_root PNP0A03:00: host bridge window [mem 0x14000000-0xffdfffff] (ignored) > pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref] > pci 0000:00:04.0: supports D1 D2 > pci 0000:00:07.1: reg 20: [io 0x1800-0x180f] > pci 0000:00:07.2: reg 20: [io 0x1820-0x183f] > pci 0000:00:07.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI > pci 0000:00:07.3: quirk: [io 0x1040-0x104f] claimed by PIIX4 SMB > pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 > pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f > pci 0000:00:08.0: reg 10: [mem 0x50000000-0x50000fff] > pci 0000:00:08.0: supports D1 D2 > pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:08.0: PME# disabled > pci 0000:00:08.1: reg 10: [mem 0x50100000-0x50100fff] > pci 0000:00:08.1: supports D1 D2 > pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:08.1: PME# disabled > pci 0000:00:0a.0: reg 10: [mem 0xf4010000-0xf4010fff] > pci 0000:00:0a.0: reg 14: [io 0x1840-0x187f] > pci 0000:00:0a.0: reg 18: [mem 0xf4020000-0xf403ffff] > pci 0000:00:0a.0: reg 30: [mem 0x00000000-0x000fffff pref] > pci 0000:00:0a.0: supports D1 D2 > pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0a.0: PME# disabled > pci 0000:00:0a.1: reg 10: [io 0x1810-0x1817] > pci 0000:00:0a.1: reg 14: [mem 0xf4011000-0xf4011fff] > pci 0000:00:0a.1: supports D1 D2 > pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0a.1: PME# disabled > pci 0000:00:0b.0: reg 10: [mem 0xf4012000-0xf4012fff] > pci 0000:00:0b.0: reg 14: [mem 0xf4000000-0xf400ffff] > pci 0000:00:0b.0: supports D1 D2 > pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot > pci 0000:00:0b.0: PME# disabled > pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff] > pci 0000:01:00.0: reg 14: [io 0x2000-0x20ff] > pci 0000:01:00.0: reg 18: [mem 0xf4100000-0xf4100fff] > pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] > pci 0000:01:00.0: supports D1 D2 > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] > pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf60007ff] > pci 0000:02:00.0: reg 14: [io 0x3000-0x307f] > pci 0000:02:00.0: supports D2 > pci 0000:02:00.0: PME# supported from D2 D3hot D3cold > pci 0000:02:00.0: PME# disabled > pci 0000:02:01.0: reg 10: [io 0x30a0-0x30a7] > pci 0000:02:01.0: reg 14: [io 0x3094-0x3097] > pci 0000:02:01.0: reg 18: [io 0x3098-0x309f] > pci 0000:02:01.0: reg 1c: [io 0x3090-0x3093] > pci 0000:02:01.0: reg 20: [io 0x3080-0x308f] > pci 0000:02:01.0: supports D1 D2 > pci 0000:02:02.0: reg 10: [mem 0x52000000-0x52000fff] > pci 0000:02:02.0: supports D1 D2 > pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:02:02.0: PME# disabled > pci 0000:02:02.1: reg 10: [mem 0x53000000-0x53000fff] > pci 0000:02:02.1: supports D1 D2 > pci 0000:02:02.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:02:02.1: PME# disabled > pci 0000:00:04.0: PCI bridge to [bus 02-08] (subtractive decode) > pci 0000:00:04.0: bridge window [io 0x0000-0x0fff] > pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff] > pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff pref] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11) > ACPI: PCI Interrupt Link [LNKB] (IRQs 9 11) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs *9 11) > ACPI: PCI Interrupt Link [LNKD] (IRQs 9 11) *5 > vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: loaded > PCI: Using ACPI for IRQ routing > PCI: pci_cache_line_size set to 32 bytes > pci 0000:00:04.0: can't reserve window [io 0x0000-0x0fff] > pci 0000:00:04.0: can't reserve window [mem 0x00000000-0x000fffff] > pci 0000:00:04.0: can't reserve window [mem 0x00000000-0x000fffff pref] > Switching to clocksource tsc > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000c0000-0x000c3fff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000c4000-0x000c7fff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000c8000-0x000cbfff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000cc000-0x000cffff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000d0000-0x000cffff disabled] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000d4000-0x000d3fff disabled] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000d8000-0x000dbfff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000dc000-0x000dffff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000e0000-0x000e3fff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000e4000-0x000e7fff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000e8000-0x000ebfff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000ec000-0x000effff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp 00:00: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:0a.0 BAR 6 [mem 0x00000000-0x000fffff pref] > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:00: [mem 0x00100000-0x13ffffff] could not be reserved > system 00:00: [mem 0xfff80000-0xffffffff] has been reserved > system 00:02: [io 0x1000-0x103f] has been reserved > system 00:02: [io 0x1040-0x104f] has been reserved > system 00:02: [io 0xfe00-0xfe0f] has been reserved > pci 0000:00:04.0: BAR 8: assigned [mem 0x14000000-0x1bffffff] > pci 0000:00:04.0: BAR 9: assigned [mem 0x1c000000-0x23ffffff pref] > pci 0000:00:08.0: BAR 9: assigned [mem 0x24000000-0x27ffffff pref] > pci 0000:00:08.0: BAR 10: assigned [mem 0x28000000-0x2bffffff] > pci 0000:00:08.1: BAR 9: assigned [mem 0x2c000000-0x2fffffff pref] > pci 0000:00:08.1: BAR 10: assigned [mem 0x30000000-0x33ffffff] > pci 0000:00:01.0: BAR 9: assigned [mem 0x34000000-0x340fffff pref] > pci 0000:00:0a.0: BAR 6: assigned [mem 0x34100000-0x341fffff pref] > pci 0000:00:04.0: BAR 7: assigned [io 0x4000-0x4fff] > pci 0000:00:08.0: BAR 7: assigned [io 0x1400-0x14ff] > pci 0000:00:08.0: BAR 8: assigned [io 0x1c00-0x1cff] > pci 0000:00:08.1: BAR 7: assigned [io 0x3400-0x34ff] > pci 0000:00:08.1: BAR 8: assigned [io 0x3800-0x38ff] > pci 0000:01:00.0: BAR 6: assigned [mem 0x34000000-0x3401ffff pref] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] > pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] > pci 0000:00:01.0: bridge window [mem 0x34000000-0x340fffff pref] > pci 0000:02:02.0: BAR 9: assigned [mem 0x1c000000-0x1fffffff pref] > pci 0000:02:02.0: BAR 10: assigned [mem 0x14000000-0x17ffffff] > pci 0000:02:02.1: BAR 9: assigned [mem 0x20000000-0x23ffffff pref] > pci 0000:02:02.1: BAR 10: assigned [mem 0x18000000-0x1bffffff] > pci 0000:02:02.0: BAR 7: assigned [io 0x4000-0x40ff] > pci 0000:02:02.0: BAR 8: assigned [io 0x4400-0x44ff] > pci 0000:02:02.1: BAR 7: assigned [io 0x4800-0x48ff] > pci 0000:02:02.1: BAR 8: assigned [io 0x4c00-0x4cff] > pci 0000:02:02.0: CardBus bridge to [bus 03-06] > pci 0000:02:02.0: bridge window [io 0x4000-0x40ff] > pci 0000:02:02.0: bridge window [io 0x4400-0x44ff] > pci 0000:02:02.0: bridge window [mem 0x1c000000-0x1fffffff pref] > pci 0000:02:02.0: bridge window [mem 0x14000000-0x17ffffff] > pci 0000:02:02.1: CardBus bridge to [bus 07-07] > pci 0000:02:02.1: bridge window [io 0x4800-0x48ff] > pci 0000:02:02.1: bridge window [io 0x4c00-0x4cff] > pci 0000:02:02.1: bridge window [mem 0x20000000-0x23ffffff pref] > pci 0000:02:02.1: bridge window [mem 0x18000000-0x1bffffff] > pci 0000:00:04.0: PCI bridge to [bus 02-08] > pci 0000:00:04.0: bridge window [io 0x4000-0x4fff] > pci 0000:00:04.0: bridge window [mem 0x14000000-0x1bffffff] > pci 0000:00:04.0: bridge window [mem 0x1c000000-0x23ffffff pref] > pci 0000:00:08.0: CardBus bridge to [bus 09-0c] > pci 0000:00:08.0: bridge window [io 0x1400-0x14ff] > pci 0000:00:08.0: bridge window [io 0x1c00-0x1cff] > pci 0000:00:08.0: bridge window [mem 0x24000000-0x27ffffff pref] > pci 0000:00:08.0: bridge window [mem 0x28000000-0x2bffffff] > pci 0000:00:08.1: CardBus bridge to [bus 0d-10] > pci 0000:00:08.1: bridge window [io 0x3400-0x34ff] > pci 0000:00:08.1: bridge window [io 0x3800-0x38ff] > pci 0000:00:08.1: bridge window [mem 0x2c000000-0x2fffffff pref] > pci 0000:00:08.1: bridge window [mem 0x30000000-0x33ffffff] > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 > PCI: setting IRQ 9 as level-triggered > pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 > pci 0000:02:02.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 > pci 0000:00:08.0: power state changed by ACPI to D0 > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > pci 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 > pci 0000:00:08.1: power state changed by ACPI to D0 > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > pci 0000:00:08.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 > pci_bus 0000:00: resource 0 [io 0x0000-0xffff] > pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] > pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] > pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf5ffffff] > pci_bus 0000:01: resource 2 [mem 0x34000000-0x340fffff pref] > pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] > pci_bus 0000:02: resource 1 [mem 0x14000000-0x1bffffff] > pci_bus 0000:02: resource 2 [mem 0x1c000000-0x23ffffff pref] > pci_bus 0000:02: resource 3 [io 0x0000-0xffff] > pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff] > pci_bus 0000:03: resource 0 [io 0x4000-0x40ff] > pci_bus 0000:03: resource 1 [io 0x4400-0x44ff] > pci_bus 0000:03: resource 2 [mem 0x1c000000-0x1fffffff pref] > pci_bus 0000:03: resource 3 [mem 0x14000000-0x17ffffff] > pci_bus 0000:07: resource 0 [io 0x4800-0x48ff] > pci_bus 0000:07: resource 1 [io 0x4c00-0x4cff] > pci_bus 0000:07: resource 2 [mem 0x20000000-0x23ffffff pref] > pci_bus 0000:07: resource 3 [mem 0x18000000-0x1bffffff] > pci_bus 0000:09: resource 0 [io 0x1400-0x14ff] > pci_bus 0000:09: resource 1 [io 0x1c00-0x1cff] > pci_bus 0000:09: resource 2 [mem 0x24000000-0x27ffffff pref] > pci_bus 0000:09: resource 3 [mem 0x28000000-0x2bffffff] > pci_bus 0000:0d: resource 0 [io 0x3400-0x34ff] > pci_bus 0000:0d: resource 1 [io 0x3800-0x38ff] > pci_bus 0000:0d: resource 2 [mem 0x2c000000-0x2fffffff pref] > pci_bus 0000:0d: resource 3 [mem 0x30000000-0x33ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > TCP reno registered > UDP hash table entries: 256 (order: 0, 4096 bytes) > UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > NET: Registered protocol family 1 > pci 0000:00:00.0: Limiting direct PCI/PCI transfers > pci 0000:01:00.0: Boot video device > PCI: CLS 32 bytes, default 32 > Unpacking initramfs... > Freeing initrd memory: 3955k freed > Simple Boot Flag at 0x35 set to 0x1 > HugeTLB registered 4 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 625 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) > io scheduler noop registered > io scheduler deadline registered > io scheduler cfq registered (default) > Non-volatile memory driver v1.3 > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > serial 00:0b: activated > 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial 0000:00:0a.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 > e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > e100 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 > e100 0000:00:0a.0: PME# disabled > e100: eth0: e100_probe: addr 0xf4010000, irq 9, MAC addr 00:90:27:96:b1:d0 > console [netcon0] enabled > netconsole: network logging started > PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > rtc_cmos 00:06: RTC can wake from S4 > rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 242 bytes nvram > cpuidle: using governor ladder > cpuidle: using governor menu > TCP cubic registered > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > NET: Registered protocol family 17 > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 > rtc_cmos 00:06: setting system clock to 2010-02-14 15:09:23 UTC (1266160163) > Freeing unused kernel memory: 272k freed > Write protecting the kernel text: 2388k > Write protecting the kernel read-only data: 728k > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THM0] (48 C) > Linux agpgart interface v0.103 > SCSI subsystem initialized > Floppy drive(s): fd0 is 1.44M > agpgart-intel 0000:00:00.0: Intel 440BX Chipset > agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 > ohci1394 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > uhci_hcd: USB Universal Host Controller Interface driver > libata version 3.00 loaded. > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 > uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 > uhci_hcd 0000:00:07.2: UHCI Host Controller > uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:07.2: irq 11, io base 0x00001820 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.33-rc8 uhci_hcd > usb usb1: SerialNumber: 0000:00:07.2 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f6000000-f60007ff] Max Packet=[2048] IR/IT contexts=[4/8] > pata_cmd64x 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 > scsi0 : pata_cmd64x > scsi1 : pata_cmd64x > ata1: PATA max UDMA/66 cmd 0x30a0 ctl 0x3094 bmdma 0x3080 irq 11 > ata2: PATA max UDMA/66 cmd 0x3098 ctl 0x3090 bmdma 0x3088 irq 11 > pata_cmd64x: active 10 recovery 10 setup 3. > pata_cmd64x: active 10 recovery 10 setup 3. > ata_piix 0000:00:07.1: version 2.13 > scsi2 : ata_piix > scsi3 : ata_piix > ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 > ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 > pata_cmd64x: active 10 recovery 10 setup 3. > pata_cmd64x: active 10 recovery 10 setup 3. > ata3.00: ATA-5: IC25N020ATCS04-0, CA2OA71A, max UDMA/100 > ata3.00: 39070080 sectors, multi 16: LBA > ata3.00: configured for UDMA/33 > usb 1-1: new full speed USB device using uhci_hcd and address 2 > scsi 2:0:0:0: Direct-Access ATA IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5 > sd 2:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) > sd 2:0:0:0: [sda] Write Protect is off > sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > sda: sda1 sda2 > sd 2:0:0:0: [sda] Attached SCSI disk > usb 1-1: New USB device found, idVendor=0451, idProduct=2036 > usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > usb 1-1: Product: General Purpose USB Hub > hub 1-1:1.0: USB hub found > hub 1-1:1.0: 2 ports detected > usb 1-1.1: new full speed USB device using uhci_hcd and address 3 > usb 1-1.1: New USB device found, idVendor=03eb, idProduct=3312 > usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > hub 1-1.1:1.0: USB hub found > hub 1-1.1:1.0: 4 ports detected > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000004434] > floppy0: no floppy controllers found > Floppy drive(s): fd0 is 1.44M > floppy0: no floppy controllers found > PM: Starting manual resume from disk > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda1): mounted filesystem with writeback data mode > udev: starting version 150 > input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 > Marking TSC unstable due to TSC halts in idle > Switching to clocksource acpi_pm > ACPI: Lid Switch [LID] > input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 > ACPI: Sleep Button [SLPB] > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 > ACPI: Power Button [PWRF] > ACPI: AC Adapter [AC] (on-line) > ACPI: Battery Slot [BAT0] (battery present) > Floppy drive(s): fd0 is 1.44M > parport_pc 00:0c: activated > parport_pc 00:0c: reported by Plug and Play ACPI > parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > yenta_cardbus 0000:00:08.0: CardBus bridge found [1014:0185] > yenta_cardbus 0000:00:08.0: ISA IRQ mask 0x0438, PCI irq 11 > yenta_cardbus 0000:00:08.0: Socket status: 30000006 > yenta_cardbus 0000:00:08.1: CardBus bridge found [1014:0185] > yenta_cardbus 0000:00:08.1: ISA IRQ mask 0x0438, PCI irq 11 > yenta_cardbus 0000:00:08.1: Socket status: 30000006 > IBM TrackPoint firmware: 0x0e, buttons: 3/3 > input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4 > yenta_cardbus 0000:02:02.0: CardBus bridge found [1014:0148] > yenta_cardbus 0000:02:02.0: Using INTVAL to route CSC interrupts to PCI > yenta_cardbus 0000:02:02.0: Routing CardBus interrupts to PCI > yenta_cardbus 0000:02:02.0: TI: mfunc 0x00001002, devctl 0x66 > irq 11: nobody cared (try booting with the "irqpoll" option) > Pid: 689, comm: modprobe Not tainted 2.6.33-rc8 #1 > Call Trace: > [<c12518be>] ? printk+0x18/0x1a > [<c104b7d7>] __report_bad_irq+0x27/0x90 > [<c104b999>] note_interrupt+0x159/0x190 > [<c103bf66>] ? clockevents_program_event+0x86/0x140 > [<c104c0bb>] handle_level_irq+0x8b/0xc0 > [<c100480e>] handle_irq+0x7e/0x90 > [<c100442a>] do_IRQ+0x3a/0xa0 > [<c103c7b7>] ? tick_program_event+0x17/0x20 > [<c1034087>] ? hrtimer_interrupt+0x177/0x280 > [<c104c030>] ? handle_level_irq+0x0/0xc0 > [<c10031f0>] common_interrupt+0x30/0x38 > [<c104c030>] ? handle_level_irq+0x0/0xc0 > [<c104a7e7>] ? handle_IRQ_event+0x17/0xd0 > [<c104c030>] ? handle_level_irq+0x0/0xc0 > [<c104c07a>] handle_level_irq+0x4a/0xc0 > <IRQ> [<c100442a>] ? do_IRQ+0x3a/0xa0 > [<c104ae0c>] ? __enable_irq+0x7c/0x90 > [<c10031f0>] ? common_interrupt+0x30/0x38 > [<d4c08083>] ? yenta_probe_cb_irq+0x93/0x120 [yenta_socket] > [<d4c0839a>] ? ti12xx_override+0x28a/0x760 [yenta_socket] > [<d4c08e5c>] ? yenta_probe+0x345/0x75a [yenta_socket] > [<c111641e>] ? local_pci_probe+0xe/0x10 > [<c11170d0>] ? pci_device_probe+0x60/0x80 > [<c1179861>] ? driver_probe_device+0x81/0x180 > [<c11163fb>] ? pci_match_device+0x9b/0xb0 > [<c11799e9>] ? __driver_attach+0x89/0x90 > [<c1179108>] ? bus_for_each_dev+0x48/0x70 > [<c11796f9>] ? driver_attach+0x19/0x20 > [<c1179960>] ? __driver_attach+0x0/0x90 > [<c1178b2f>] ? bus_add_driver+0x19f/0x260 > [<c1116420>] ? pci_device_shutdown+0x0/0x20 > [<c1116420>] ? pci_device_shutdown+0x0/0x20 > [<c1179c85>] ? driver_register+0x65/0x120 > [<c11172c9>] ? __pci_register_driver+0x39/0xb0 > [<d4c0d017>] ? yenta_socket_init+0x17/0x19 [yenta_socket] > [<c100111d>] ? do_one_initcall+0x2d/0x180 > [<d4c0d000>] ? yenta_socket_init+0x0/0x19 [yenta_socket] > [<c104472f>] ? sys_init_module+0xaf/0x210 > [<c1002cd7>] ? sysenter_do_call+0x12/0x26 > handlers: > [<d4969940>] (usb_hcd_irq+0x0/0x60 [usbcore]) > [<d484a090>] (ohci_irq_handler+0x0/0x850 [ohci1394]) > [<d491bac0>] (ata_sff_interrupt+0x0/0xe0 [libata]) > [<d4c08930>] (yenta_interrupt+0x0/0xd0 [yenta_socket]) > [<d4c08930>] (yenta_interrupt+0x0/0xd0 [yenta_socket]) > Disabling IRQ #11 > yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0438, PCI irq 9 > yenta_cardbus 0000:02:02.0: Socket status: 30000006 > yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff > yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x14000000 - 0x1bffffff > yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x23ffffff > yenta_cardbus 0000:02:02.1: CardBus bridge found [1014:0148] > yenta_cardbus 0000:02:02.1: Using INTVAL to route CSC interrupts to PCI > yenta_cardbus 0000:02:02.1: Routing CardBus interrupts to PCI > yenta_cardbus 0000:02:02.1: TI: mfunc 0x00001002, devctl 0x66 > floppy0: no floppy controllers found > yenta_cardbus 0000:02:02.1: ISA IRQ mask 0x0438, PCI irq 9 > yenta_cardbus 0000:02:02.1: Socket status: 30000006 > yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff > yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x14000000 - 0x1bffffff > yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x23ffffff > thinkpad_acpi: ThinkPad ACPI Extras v0.24 > thinkpad_acpi: http://ibm-acpi.sf.net/ > thinkpad_acpi: ThinkPad BIOS IZET9BWW (2.23 ), EC unknown > thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware > thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features > Registered led device: tpacpi::thinklight > Registered led device: tpacpi::power > Registered led device: tpacpi::standby > thinkpad_acpi: Console audio control enabled, mode: monitor (read only) > input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 > CS4281 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 > gameport: CS4281 Gameport is pci0000:00:0b.0/gameport0, speed 2294kHz > Adding 680392k swap on /dev/sda2. Priority:-1 extents:1 across:680392k > EXT3-fs (sda1): using internal journal > fuse init (API version 7.13) > e100 0000:00:0a.0: firmware: using built-in firmware e100/d101s_ucode.bin > ADDRCONF(NETDEV_UP): eth0: link is not ready > e100: eth0 NIC Link is Up 100 Mbps Full Duplex > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6 > thinkpad_acpi: asked for hotkey mask 0x0006080c, but firmware forced it to 0x0000080c > input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input7 > ADDRCONF(NETDEV_UP): eth0: link is not ready > e100: eth0 NIC Link is Up 100 Mbps Full Duplex > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > Bluetooth: Core ver 2.15 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.14 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM ver 1.11 > Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > Bluetooth: BNEP filters: protocol multicast > Bridge firewalling registered > Bluetooth: SCO (Voice Link) ver 0.6 > Bluetooth: SCO socket layer initialized > lp0: using parport0 (interrupt-driven). > > 00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 64 > Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] > Capabilities: <access denied> > Kernel driver in use: agpgart-intel > > 00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 128 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f4100000-f5ffffff > Prefetchable memory behind bridge: 34000000-340fffff > Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+ > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > 00:04.0 PCI bridge [0604]: Texas Instruments PCI2032 PCI Docking Bridge [104c:ac22] (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=08, sec-latency=68 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: 14000000-1bffffff > Prefetchable memory behind bridge: 1c000000-23ffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > > 00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > > 00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] > Region 4: I/O ports at 1800 [size=16] > Kernel driver in use: ata_piix > > 00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI]) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at 1820 [size=32] > Kernel driver in use: uhci_hcd > > 00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin ? routed to IRQ 9 > > 00:08.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80) > Subsystem: IBM ThinkPad A/T/X Series [1014:0185] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=09, subordinate=0c, sec-latency=176 > Memory window 0: 24000000-27fff000 (prefetchable) > Memory window 1: 28000000-2bfff000 > I/O window 0: 00001400-000014ff > I/O window 1: 00001c00-00001cff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > 00:08.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 80) > Subsystem: IBM ThinkPad A/T/X Series [1014:0185] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin B routed to IRQ 11 > Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=0d, subordinate=10, sec-latency=176 > Memory window 0: 2c000000-2ffff000 (prefetchable) > Memory window 1: 30000000-33fff000 > I/O window 0: 00003400-000034ff > I/O window 1: 00003800-000038ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > 00:0a.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 09) > Subsystem: Intel Corporation EtherExpress PRO/100+ MiniPCI [8086:2408] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at f4010000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at 1840 [size=64] > Region 2: Memory at f4020000 (32-bit, non-prefetchable) [size=128K] > [virtual] Expansion ROM at 34100000 [disabled] [size=1M] > Capabilities: <access denied> > Kernel driver in use: e100 > > 00:0a.1 Serial controller [0700]: Xircom Mini-PCI V.90 56k Modem [115d:000c] (prog-if 02 [16550]) > Subsystem: Intel Corporation Device [8086:2408] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at 1810 [size=8] > Region 1: Memory at f4011000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: serial > > 00:0b.0 Multimedia audio controller [0401]: Cirrus Logic Crystal CS4281 PCI Audio [1013:6005] (rev 01) > Subsystem: IBM Device [1014:0183] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (1000ns min, 6000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f4012000 (32-bit, non-prefetchable) [size=4K] > Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: CS4281 > > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility P/M AGP 2x [1002:4c4d] (rev 64) (prog-if 00 [VGA controller]) > Subsystem: IBM Device [1014:0182] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 66 (2000ns min), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M] > Region 1: I/O ports at 2000 [size=256] > Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at 34000000 [disabled] [size=128K] > Capabilities: <access denied> > > 02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI]) > Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (8000ns max), Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=2K] > Region 1: I/O ports at 3000 [size=128] > Capabilities: <access denied> > Kernel driver in use: ohci1394 > > 02:01.0 IDE interface [0101]: Silicon Image, Inc. PCI0648 [1095:0648] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) > Subsystem: Silicon Image, Inc. PCI0648 [1095:0648] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (500ns min, 1000ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at 30a0 [size=8] > Region 1: I/O ports at 3094 [size=4] > Region 2: I/O ports at 3098 [size=8] > Region 3: I/O ports at 3090 [size=4] > Region 4: I/O ports at 3080 [size=16] > Capabilities: <access denied> > Kernel driver in use: pata_cmd64x > > 02:02.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51] > Subsystem: IBM ThinkPad A20m [1014:0148] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at 52000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 > Memory window 0: 1c000000-1ffff000 (prefetchable) > Memory window 1: 14000000-17fff000 > I/O window 0: 00004000-000040ff > I/O window 1: 00004400-000044ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > 02:02.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51] > Subsystem: IBM ThinkPad A20m [1014:0148] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 9 > Region 0: Memory at 53000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=02, secondary=07, subordinate=07, sec-latency=176 > Memory window 0: 20000000-23fff000 (prefetchable) > Memory window 1: 18000000-1bfff000 > I/O window 0: 00004800-000048ff > I/O window 1: 00004c00-00004cff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists