[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20100311180426.4824.5566.stgit@angua>
Date: Thu, 11 Mar 2010 11:04:26 -0700
From: Grant Likely <grant.likely@...retlab.ca>
To: monstr@...str.eu, gregkh@...e.de, benh@...nel.crashing.org,
akpm@...ux-foundation.org, davem@...emloft.net,
sfr@...b.auug.org.au, jgarzik@...ox.com, ben-linux@...ff.org,
dwmw2@...radead.org, jeremy.kerr@...onical.com,
James.Bottomley@...e.de, broonie@...nsource.wolfsonmicro.com,
microblaze-uclinux@...e.uq.edu.au, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org, sparclinux@...r.kernel.org,
linux-ide@...r.kernel.org, netdev@...r.kernel.org,
linux-i2c@...r.kernel.org, devicetree-discuss@...ts.ozlabs.org,
linux-scsi@...r.kernel.org, alsa-devel@...a-project.org
Subject: [PATCH 07/37] drivers/serial: use .dev.of_node instead of .node in
struct of_device
.node is being removed
Signed-off-by: Grant Likely <grant.likely@...retlab.ca>
---
drivers/serial/mpc52xx_uart.c | 8 ++++----
drivers/serial/sunsu.c | 6 +++---
drivers/serial/sunzilog.c | 8 ++++----
drivers/serial/uartlite.c | 6 +++---
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 3119fdd..cb07938 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -1328,14 +1328,14 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
/* Check validity & presence */
for (idx = 0; idx < MPC52xx_PSC_MAXNUM; idx++)
- if (mpc52xx_uart_nodes[idx] == op->node)
+ if (mpc52xx_uart_nodes[idx] == op->dev.of_node)
break;
if (idx >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
pr_debug("Found %s assigned to ttyPSC%x\n",
mpc52xx_uart_nodes[idx]->full_name, idx);
- uartclk = psc_ops->getuartclk(op->node);
+ uartclk = psc_ops->getuartclk(op->dev.of_node);
if (uartclk == 0) {
dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
return -EINVAL;
@@ -1355,7 +1355,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
port->dev = &op->dev;
/* Search for IRQ and mapbase */
- ret = of_address_to_resource(op->node, 0, &res);
+ ret = of_address_to_resource(op->dev.of_node, 0, &res);
if (ret)
return ret;
@@ -1365,7 +1365,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
return -EINVAL;
}
- psc_ops->get_irq(port, op->node);
+ psc_ops->get_irq(port, op->dev.of_node);
if (port->irq == NO_IRQ) {
dev_dbg(&op->dev, "Could not get irq\n");
return -EINVAL;
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 170d3d6..2ab82ed 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1199,7 +1199,7 @@ static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
return -ENODEV;
printk("%s: %s port at %llx, irq %u\n",
- to_of_device(up->port.dev)->node->full_name,
+ to_of_device(up->port.dev)->dev.of_node->full_name,
(up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
(unsigned long long) up->port.mapbase,
up->port.irq);
@@ -1351,7 +1351,7 @@ static int __init sunsu_console_setup(struct console *co, char *options)
spin_lock_init(&port->lock);
/* Get firmware console settings. */
- sunserial_console_termios(co, to_of_device(port->dev)->node);
+ sunserial_console_termios(co, to_of_device(port->dev)->dev.of_node);
memset(&termios, 0, sizeof(struct ktermios));
termios.c_cflag = co->cflag;
@@ -1408,7 +1408,7 @@ static enum su_type __devinit su_get_type(struct device_node *dp)
static int __devinit su_probe(struct of_device *op, const struct of_device_id *match)
{
static int inst;
- struct device_node *dp = op->node;
+ struct device_node *dp = op->dev.of_node;
struct uart_sunsu_port *up;
struct resource *rp;
enum su_type type;
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index 2c7a66a..20f9be8 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options)
(sunzilog_reg.minor - 64) + con->index, con->index);
/* Get firmware console settings. */
- sunserial_console_termios(con, to_of_device(up->port.dev)->node);
+ sunserial_console_termios(con, to_of_device(up->port.dev)->dev.of_node);
/* Firmware console speed is limited to 150-->38400 baud so
* this hackish cflag thing is OK.
@@ -1358,7 +1358,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
int keyboard_mouse = 0;
int err;
- if (of_find_property(op->node, "keyboard", NULL))
+ if (of_find_property(op->dev.of_node, "keyboard", NULL))
keyboard_mouse = 1;
/* uarts must come before keyboards/mice */
@@ -1415,7 +1415,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
sunzilog_init_hw(&up[1]);
if (!keyboard_mouse) {
- if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+ if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
&sunzilog_reg, up[0].port.line,
false))
up->flags |= SUNZILOG_FLAG_IS_CONS;
@@ -1425,7 +1425,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
rp, sizeof(struct zilog_layout));
return err;
}
- if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+ if (sunserial_console_match(SUNZILOG_CONSOLE(), op->dev.of_node,
&sunzilog_reg, up[1].port.line,
false))
up->flags |= SUNZILOG_FLAG_IS_CONS;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index f0a6c61..8fc2583 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -591,15 +591,15 @@ ulite_of_probe(struct of_device *op, const struct of_device_id *match)
dev_dbg(&op->dev, "%s(%p, %p)\n", __func__, op, match);
- rc = of_address_to_resource(op->node, 0, &res);
+ rc = of_address_to_resource(op->dev.of_node, 0, &res);
if (rc) {
dev_err(&op->dev, "invalid address\n");
return rc;
}
- irq = irq_of_parse_and_map(op->node, 0);
+ irq = irq_of_parse_and_map(op->dev.of_node, 0);
- id = of_get_property(op->node, "port-number", NULL);
+ id = of_get_property(op->dev.of_node, "port-number", NULL);
return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists