| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1270049008-11646-1-git-send-email-mroberto@cpti.cetuc.puc-rio.br>
Date: Wed, 31 Mar 2010 12:23:28 -0300
From: Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
To: Russell King <linux@....linux.org.uk>,
Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>,
Ralf Baechle <ralf@...ux-mips.org>,
Eric Miao <eric.y.miao@...il.com>,
Wolfram Sang <w.sang@...gutronix.de>,
Dominik Brodowski <linux@...inikbrodowski.net>,
Manuel Lauss <manuel.lauss@...il.com>,
Dmitry Artamonow <mad_soft@...ox.ru>,
"Rafael J. Wysocki" <rjw@...k.pl>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pcmcia@...ts.infradead.org,
Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
Subject: [PATCH] ARM: pcmcia: Adds nanoEngine PCMCIA support.
This patch adds nanoEngine PCMCIA support, with support for two sockets.
In order to have a fully functional pcmcia subsystem in a BSE nanoEngine board
you should carefully read this:
http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
Signed-off-by: Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
Acked-by: Dominik Brodowski <linux@...inikbrodowski.net>
---
arch/arm/mach-sa1100/include/mach/nanoengine.h | 30 ++++
arch/arm/mach-sa1100/nanoengine.c | 2 +-
drivers/pcmcia/Makefile | 3 +-
drivers/pcmcia/sa1100_generic.c | 3 +
drivers/pcmcia/sa1100_generic.h | 1 +
drivers/pcmcia/sa1100_nanoengine.c | 219 ++++++++++++++++++++++++
6 files changed, 256 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-sa1100/include/mach/nanoengine.h
create mode 100644 drivers/pcmcia/sa1100_nanoengine.c
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
new file mode 100644
index 0000000..0537766
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/nanoengine.h
+ *
+ * This file contains the hardware specific definitions for nanoEngine.
+ * Only include this file from SA1100-specific files.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_NANOENGINE_H
+#define __ASM_ARCH_NANOENGINE_H
+
+#define GPIO_PC_READY0 GPIO_GPIO(11) /* ready for socket 0 (active high)*/
+#define GPIO_PC_READY1 GPIO_GPIO(12) /* ready for socket 1 (active high) */
+#define GPIO_PC_CD0 GPIO_GPIO(13) /* detect for socket 0 (active low) */
+#define GPIO_PC_CD1 GPIO_GPIO(14) /* detect for socket 1 (active low) */
+#define GPIO_PC_RESET0 GPIO_GPIO(15) /* reset socket 0 */
+#define GPIO_PC_RESET1 GPIO_GPIO(16) /* reset socket 1 */
+
+#define NANOENGINE_IRQ_GPIO_PC_READY0 IRQ_GPIO11
+#define NANOENGINE_IRQ_GPIO_PC_READY1 IRQ_GPIO12
+#define NANOENGINE_IRQ_GPIO_PC_CD0 IRQ_GPIO13
+#define NANOENGINE_IRQ_GPIO_PC_CD1 IRQ_GPIO14
+
+#endif
+
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 73a7922..36cdc8a 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -3,7 +3,7 @@
*
* Bright Star Engineering's nanoEngine board init code.
*
- * Copyright (C) 2009 Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 381b031..e12a721 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -48,8 +48,9 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o
sa1100_cs-y += sa1100_generic.o
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o
-sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
+sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
+sa1100_cs-$(CONFIG_SA1100_NANOENGINE) += sa1100_nanoengine.o
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 5188962..a1fce5d 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -54,6 +54,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
pcmcia_h3600_init,
#endif
+#ifdef CONFIG_SA1100_NANOENGINE
+ pcmcia_nanoengine_init,
+#endif
#ifdef CONFIG_SA1100_SHANNON
pcmcia_shannon_init,
#endif
diff --git a/drivers/pcmcia/sa1100_generic.h b/drivers/pcmcia/sa1100_generic.h
index 794f96a..adb08db 100644
--- a/drivers/pcmcia/sa1100_generic.h
+++ b/drivers/pcmcia/sa1100_generic.h
@@ -13,6 +13,7 @@ extern int pcmcia_freebird_init(struct device *);
extern int pcmcia_gcplus_init(struct device *);
extern int pcmcia_graphicsmaster_init(struct device *);
extern int pcmcia_h3600_init(struct device *);
+extern int pcmcia_nanoengine_init(struct device *);
extern int pcmcia_pangolin_init(struct device *);
extern int pcmcia_pfs168_init(struct device *);
extern int pcmcia_shannon_init(struct device *);
diff --git a/drivers/pcmcia/sa1100_nanoengine.c b/drivers/pcmcia/sa1100_nanoengine.c
new file mode 100644
index 0000000..3d2652e
--- /dev/null
+++ b/drivers/pcmcia/sa1100_nanoengine.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/pcmcia/sa1100_nanoengine.c
+ *
+ * PCMCIA implementation routines for BSI nanoEngine.
+ *
+ * In order to have a fully functional pcmcia subsystem in a BSE nanoEngine
+ * board you should carefully read this:
+ * http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@...i.cetuc.puc-rio.br>
+ *
+ * Based on original work for kernel 2.4 by
+ * Miguel Freitas <miguel@...i.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+
+#include "sa1100_generic.h"
+
+static struct pcmcia_irqs irqs_skt0[] = {
+ /* socket, IRQ, name */
+ { 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" },
+};
+
+static struct pcmcia_irqs irqs_skt1[] = {
+ /* socket, IRQ, name */
+ { 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" },
+};
+
+struct nanoengine_pins {
+ unsigned input_pins;
+ unsigned output_pins;
+ unsigned clear_outputs;
+ unsigned transition_pins;
+ unsigned pci_irq;
+ struct pcmcia_irqs *pcmcia_irqs;
+ unsigned pcmcia_irqs_size;
+};
+
+static struct nanoengine_pins nano_skts[] = {
+ {
+ .input_pins = GPIO_PC_READY0 | GPIO_PC_CD0,
+ .output_pins = GPIO_PC_RESET0,
+ .clear_outputs = GPIO_PC_RESET0,
+ .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD0,
+ .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY0,
+ .pcmcia_irqs = irqs_skt0,
+ .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt0)
+ }, {
+ .input_pins = GPIO_PC_READY1 | GPIO_PC_CD1,
+ .output_pins = GPIO_PC_RESET1,
+ .clear_outputs = GPIO_PC_RESET1,
+ .transition_pins = NANOENGINE_IRQ_GPIO_PC_CD1,
+ .pci_irq = NANOENGINE_IRQ_GPIO_PC_READY1,
+ .pcmcia_irqs = irqs_skt1,
+ .pcmcia_irqs_size = ARRAY_SIZE(irqs_skt1)
+ }
+};
+
+unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts);
+
+static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return -ENXIO;
+
+ GPDR &= ~nano_skts[i].input_pins;
+ GPDR |= nano_skts[i].output_pins;
+ GPCR = nano_skts[i].clear_outputs;
+ set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH);
+ skt->socket.pci_irq = nano_skts[i].pci_irq;
+
+ return soc_pcmcia_request_irqs(skt,
+ nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Release all resources.
+ */
+static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return;
+
+ soc_pcmcia_free_irqs(skt,
+ nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static int nanoengine_pcmcia_configure_socket(
+ struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ unsigned reset;
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return -ENXIO;
+
+ switch (i) {
+ case 0:
+ reset = GPIO_PC_RESET0;
+ break;
+ case 1:
+ reset = GPIO_PC_RESET1;
+ break;
+ default:
+ return -ENXIO;
+ }
+
+ if (state->flags & SS_RESET)
+ GPSR = reset;
+ else
+ GPCR = reset;
+
+ return 0;
+}
+
+static void nanoengine_pcmcia_socket_state(
+ struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
+{
+ unsigned long levels = GPLR;
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return;
+
+ memset(state, 0, sizeof(struct pcmcia_state));
+ switch (i) {
+ case 0:
+ state->ready = (levels & GPIO_PC_READY0) ? 1 : 0;
+ state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0;
+ break;
+ case 1:
+ state->ready = (levels & GPIO_PC_READY1) ? 1 : 0;
+ state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0;
+ break;
+ default:
+ return;
+ }
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0; /* Not available */
+ state->vs_3v = 1; /* Can only apply 3.3V */
+ state->vs_Xv = 0;
+}
+
+/*
+ * Enable card status IRQs on (re-)initialisation. This can
+ * be called at initialisation, power management event, or
+ * pcmcia event.
+ */
+static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return;
+
+ soc_pcmcia_enable_irqs(skt,
+ nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Disable card status IRQs on suspend.
+ */
+static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+ unsigned i = skt->nr;
+
+ if (i >= num_nano_pcmcia_sockets)
+ return;
+
+ soc_pcmcia_disable_irqs(skt,
+ nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static struct pcmcia_low_level nanoengine_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .hw_init = nanoengine_pcmcia_hw_init,
+ .hw_shutdown = nanoengine_pcmcia_hw_shutdown,
+
+ .configure_socket = nanoengine_pcmcia_configure_socket,
+ .socket_state = nanoengine_pcmcia_socket_state,
+ .socket_init = nanoengine_pcmcia_socket_init,
+ .socket_suspend = nanoengine_pcmcia_socket_suspend,
+};
+
+int pcmcia_nanoengine_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_nanoengine())
+ ret = sa11xx_drv_pcmcia_probe(
+ dev, &nanoengine_pcmcia_ops, 0, 2);
+
+ return ret;
+}
+
--
1.7.0.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists