| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20100413172048.GB7882@pengutronix.de>
Date: Tue, 13 Apr 2010 19:20:48 +0200
From: Sascha Hauer <s.hauer@...gutronix.de>
To: Dinh.Nguyen@...escale.com
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux@....linux.org.uk, valentin.longchamp@...l.ch,
daniel@...aq.de, grant.likely@...retlab.ca,
r.herring@...escale.com, bryan.wu@...onical.com,
amit.kucheria@...onical.com
Subject: Re: [PATCH 2.6.34-rc4 1/8] mx5: Add registration of GPIOs for MX51
Babbage board.
On Tue, Apr 13, 2010 at 11:10:24AM -0500, Dinh.Nguyen@...escale.com wrote:
> From: Dinh Nguyen <Dinh.Nguyen@...escale.com>
>
> Update /plat-mxc/gpio.c to support Freescale's MX51 Babbage HW.
> This patch applies to 2.6.34-rc4.
>
> Signed-off-by: Dinh Nguyen <Dinh.Nguyen@...escale.com>
> ---
> arch/arm/mach-mx5/board-mx51_babbage.c | 5 +++-
> arch/arm/mach-mx5/devices.c | 33 ++++++++++++++++++++++++++++++-
> arch/arm/plat-mxc/gpio.c | 32 +++++++++++++++++++++++++-----
> 3 files changed, 61 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
> index ee67a71..afbe400 100644
> --- a/arch/arm/mach-mx5/board-mx51_babbage.c
> +++ b/arch/arm/mach-mx5/board-mx51_babbage.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@...onical.com>
> *
> * The code contained herein is licensed under the GNU General Public
> @@ -12,6 +12,7 @@
>
> #include <linux/init.h>
> #include <linux/platform_device.h>
> +#include <linux/gpio.h>
>
> #include <mach/common.h>
> #include <mach/hardware.h>
> @@ -75,6 +76,8 @@ static void __init mxc_board_init(void)
> ARRAY_SIZE(mx51babbage_pads));
> mxc_init_imx_uart();
> platform_add_devices(devices, ARRAY_SIZE(devices));
> +
> + mxc_register_gpios();
On other i.MXs this is called in plat-mxc/irq.c. It should be called in
plat-mxc/tzic.c then to avoid having this call in every board.
> }
>
> static void __init mx51_babbage_timer_init(void)
> diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
> index d6fd396..73f2342 100644
> --- a/arch/arm/mach-mx5/devices.c
> +++ b/arch/arm/mach-mx5/devices.c
> @@ -1,5 +1,6 @@
> /*
> * Copyright 2009 Amit Kucheria <amit.kucheria@...onical.com>
> + * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
> *
> * The code contained herein is licensed under the GNU General Public
> * License. You may obtain a copy of the GNU General Public License
> @@ -11,7 +12,9 @@
>
> #include <linux/platform_device.h>
> #include <mach/hardware.h>
> +#include <mach/gpio.h>
> #include <mach/imx-uart.h>
> +#include <mach/irqs.h>
>
> static struct resource uart0[] = {
> {
> @@ -89,8 +92,34 @@ struct platform_device mxc_fec_device = {
> .resource = mxc_fec_resources,
> };
>
> -/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
> +struct mxc_gpio_port mxc_gpio_ports[] = {
static please
> + {
> + .chip.label = "gpio-0",
> + .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
> + .irq = MX51_MXC_INT_GPIO1_LOW,
> + .virtual_irq_start = MXC_GPIO_IRQ_START
> + },
> + {
> + .chip.label = "gpio-1",
> + .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
> + .irq = MX51_MXC_INT_GPIO2_LOW,
> + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
> + },
> + {
> + .chip.label = "gpio-2",
> + .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
> + .irq = MX51_MXC_INT_GPIO3_LOW,
> + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
> + },
> + {
> + .chip.label = "gpio-3",
> + .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
> + .irq = MX51_MXC_INT_GPIO4_LOW,
> + .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
> + },
> +};
> +
> int __init mxc_register_gpios(void)
> {
> - return 0;
> + return mxc_gpio_init(mxc_gpio_ports, 4);
> }
> diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
> index 70b2389..1df23b2 100644
> --- a/arch/arm/plat-mxc/gpio.c
> +++ b/arch/arm/plat-mxc/gpio.c
> @@ -3,7 +3,7 @@
> * Copyright 2008 Juergen Beisert, kernel@...gutronix.de
> *
> * Based on code from Freescale,
> - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
> + * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
> *
> * This program is free software; you can redistribute it and/or
> * modify it under the terms of the GNU General Public License
> @@ -38,7 +38,6 @@ static int gpio_table_size;
> #define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
> #define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
> #define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
> -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
>
> #define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
> #define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
> @@ -171,6 +170,25 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
> }
> }
>
> +/* one interrupt *per* gpio port */
> +static void mx5_gpio_irq_handler(u32 irq, struct irq_desc *desc)
> +{
> + u32 irq_stat;
> + u32 mask = 0xFFFFFFFF;
> + struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
> +
> +#ifdef MXC_GPIO_SPLIT_IRQ_2
> + if (irq == port->irq)
> + mask = 0x0000FFFF;
> + else
> + mask = 0xFFFF0000;
> +#endif
> +
> + irq_stat = __raw_readl(port->base + GPIO_ISR) &
> + (__raw_readl(port->base + GPIO_IMR) & mask);
> + mxc_gpio_irq_handler(port, irq_stat);
> +}
> +
> /* MX1 and MX3 has one interrupt *per* gpio port */
> static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
> {
> @@ -289,11 +307,13 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
> /* its a serious configuration bug when it fails */
> BUG_ON( gpiochip_add(&port[i].chip) < 0 );
>
> - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
> - /* setup one handler for each entry */
> + /* setup one handler for each entry */
> + if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25())
> set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
> - set_irq_data(port[i].irq, &port[i]);
> - }
> + else if (cpu_is_mx51())
> + set_irq_chained_handler(port[i].irq, mx5_gpio_irq_handler);
> +
> + set_irq_data(port[i].irq, &port[i]);
> }
>
> if (cpu_is_mx2()) {
> --
> 1.6.0.4
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists