| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AANLkTikffmoWofbIo2h6zw-VW5aKEH8T_b0vMfKdo3KJ@mail.gmail.com>
Date: Sun, 23 May 2010 22:34:59 -0400
From: Devin Heitmueller <dheitmueller@...nellabs.com>
To: Daniel Mack <daniel@...aq.de>
Cc: linux-kernel@...r.kernel.org,
Mauro Carvalho Chehab <mchehab@...radead.org>,
Jiri Slaby <jslaby@...e.cz>, Dmitry Torokhov <dtor@...l.ru>,
linux-media@...r.kernel.org
Subject: Re: [PATCH] drivers/media/dvb/dvb-usb/dib0700: fix return values
On Wed, May 19, 2010 at 6:46 AM, Daniel Mack <daniel@...aq.de> wrote:
> Propagte correct error values instead of returning -1 which just means
> -EPERM ("Permission denied")
>
> While at it, also fix some coding style violations.
>
> Signed-off-by: Daniel Mack <daniel@...aq.de>
> Cc: Mauro Carvalho Chehab <mchehab@...radead.org>
> Cc: Jiri Slaby <jslaby@...e.cz>
> Cc: Dmitry Torokhov <dtor@...l.ru>
> Cc: Devin Heitmueller <dheitmueller@...nellabs.com>
> Cc: linux-media@...r.kernel.org
> ---
> drivers/media/dvb/dvb-usb/dib0700_core.c | 82 +++++++++++++++--------------
> 1 files changed, 42 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
> index 4f961d2..45aec3a 100644
> --- a/drivers/media/dvb/dvb-usb/dib0700_core.c
> +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
> @@ -53,7 +53,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
> int status;
>
> deb_data(">>> ");
> - debug_dump(tx,txlen,deb_data);
> + debug_dump(tx, txlen, deb_data);
>
> status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
> tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
> @@ -98,7 +98,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
> deb_info("ep 0 read error (status = %d)\n",status);
>
> deb_data("<<< ");
> - debug_dump(rx,rxlen,deb_data);
> + debug_dump(rx, rxlen, deb_data);
>
> return status; /* length in case of success */
> }
> @@ -106,28 +106,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
> int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
> {
> u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
> - return dib0700_ctrl_wr(d,buf,3);
> + return dib0700_ctrl_wr(d, buf, sizeof(buf));
> }
>
> static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
> {
> - struct dib0700_state *st = d->priv;
> - u8 b[3];
> - int ret;
> -
> - if (st->fw_version >= 0x10201) {
> - b[0] = REQUEST_SET_USB_XFER_LEN;
> - b[1] = (nb_ts_packets >> 8)&0xff;
> - b[2] = nb_ts_packets & 0xff;
> -
> - deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
> -
> - ret = dib0700_ctrl_wr(d, b, 3);
> - } else {
> - deb_info("this firmware does not allow to change the USB xfer len\n");
> - ret = -EIO;
> - }
> - return ret;
> + struct dib0700_state *st = d->priv;
> + u8 b[3];
> + int ret;
> +
> + if (st->fw_version >= 0x10201) {
> + b[0] = REQUEST_SET_USB_XFER_LEN;
> + b[1] = (nb_ts_packets >> 8) & 0xff;
> + b[2] = nb_ts_packets & 0xff;
> +
> + deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
> +
> + ret = dib0700_ctrl_wr(d, b, 3);
> + } else {
> + deb_info("this firmware does not allow to change the USB xfer len\n");
> + ret = -EIO;
> + }
> +
> + return ret;
> }
>
> /*
> @@ -178,7 +179,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
> value = ((en_start << 7) | (en_stop << 6) |
> (msg[i].len & 0x3F)) << 8 | i2c_dest;
> /* I2C ctrl + FE bus; */
> - index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
> + index = ((gen_mode << 6) & 0xC0) |
> + ((bus_mode << 4) & 0x30);
>
> result = usb_control_msg(d->udev,
> usb_rcvctrlpipe(d->udev, 0),
> @@ -198,11 +200,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
> } else {
> /* Write request */
> buf[0] = REQUEST_NEW_I2C_WRITE;
> - buf[1] = (msg[i].addr << 1);
> + buf[1] = msg[i].addr << 1;
> buf[2] = (en_start << 7) | (en_stop << 6) |
> (msg[i].len & 0x3F);
> /* I2C ctrl + FE bus; */
> - buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
> + buf[3] = ((gen_mode << 6) & 0xC0) |
> + ((bus_mode << 4) & 0x30);
> /* The Actual i2c payload */
> memcpy(&buf[4], msg[i].buf, msg[i].len);
>
> @@ -240,7 +243,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
>
> for (i = 0; i < num; i++) {
> /* fill in the address */
> - buf[1] = (msg[i].addr << 1);
> + buf[1] = msg[i].addr << 1;
> /* fill the buffer */
> memcpy(&buf[2], msg[i].buf, msg[i].len);
>
> @@ -368,7 +371,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
> u8 buf[260];
>
> while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
> - deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
> + deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
> + hx.addr, hx.len, hx.chk);
>
> buf[0] = hx.len;
> buf[1] = (hx.addr >> 8) & 0xff;
> @@ -408,16 +412,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
> REQUEST_GET_VERSION,
> USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
> b, sizeof(b), USB_CTRL_GET_TIMEOUT);
> - fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
> + fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
>
> /* set the buffer size - DVB-USB is allocating URB buffers
> * only after the firwmare download was successful */
> for (i = 0; i < dib0700_device_count; i++) {
> for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
> adap_num++) {
> - if (fw_version >= 0x10201)
> + if (fw_version >= 0x10201) {
> dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
> - else {
> + } else {
> /* for fw version older than 1.20.1,
> * the buffersize has to be n times 512 */
> dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
> @@ -453,7 +457,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
> if (st->disable_streaming_master_mode == 1)
> b[2] = 0x00;
> else
> - b[2] = (0x01 << 4); /* Master mode */
> + b[2] = 0x01 << 4; /* Master mode */
>
> b[3] = 0x00;
>
> @@ -466,7 +470,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
>
> b[2] |= st->channel_state;
>
> - deb_info("data for streaming: %x %x\n",b[1],b[2]);
> + deb_info("data for streaming: %x %x\n", b[1], b[2]);
>
> return dib0700_ctrl_wr(adap->dev, b, 4);
> }
> @@ -631,7 +635,7 @@ resubmit:
> int dib0700_rc_setup(struct dvb_usb_device *d)
> {
> struct dib0700_state *st = d->priv;
> - u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
> + u8 rc_setup[3] = { REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0 };
> struct urb *purb;
> int ret;
> int i;
> @@ -640,10 +644,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
> return 0;
>
> /* Set the IR mode */
> - i = dib0700_ctrl_wr(d, rc_setup, 3);
> - if (i<0) {
> + i = dib0700_ctrl_wr(d, rc_setup, sizeof(rc_setup));
> + if (i < 0) {
> err("ir protocol setup failed");
> - return -1;
> + return i;
> }
>
> if (st->fw_version < 0x10200)
> @@ -653,14 +657,14 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
> purb = usb_alloc_urb(0, GFP_KERNEL);
> if (purb == NULL) {
> err("rc usb alloc urb failed\n");
> - return -1;
> + return -ENOMEM;
> }
>
> purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
> if (purb->transfer_buffer == NULL) {
> err("rc kzalloc failed\n");
> usb_free_urb(purb);
> - return -1;
> + return -ENOMEM;
> }
>
> purb->status = -EINPROGRESS;
> @@ -669,12 +673,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
> dib0700_rc_urb_completion, d);
>
> ret = usb_submit_urb(purb, GFP_ATOMIC);
> - if (ret != 0) {
> + if (ret)
> err("rc submit urb failed\n");
> - return -1;
> - }
>
> - return 0;
> + return ret;
> }
>
> static int dib0700_probe(struct usb_interface *intf,
> --
> 1.7.1
Hello Daniel,
I am not against any of these changes in principle, but you should not
be mixing functional changes with codingstyle fixes. It results in a
situation where as a reviewer I have to scrutinize every line *very*
closely to determine whether it's an actual change or just a
codingstyle fix.
In other words, split this into two patches.
Thanks,
Devin
--
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists