Message-ID: <20100618234222.GL3582@sortiz.org>
Date:	Sat, 19 Jun 2010 01:42:24 +0200
From:	Samuel Ortiz <sameo@...ux.intel.com>
To:	Rabin Vincent <rabin.vincent@...ricsson.com>
Cc:	linux-kernel@...r.kernel.org, STEricsson_nomadik_linux@...t.st.com,
	Linus Walleij <linus.walleij@...ricsson.com>,
	l.fu@...gutronix.de
Subject: Re: [PATCH 1/3] mfd: add STMPExxxx I/O Expander support

Hi Rabin,

On Mon, May 31, 2010 at 05:47:14PM +0530, Rabin Vincent wrote:
> Add support for the STMPExxxx family of I/O Expanders from
> STMicroelectronics.  These devices include upto 24 gpios, a PWM
> controller, and a keypad controller.  This patch adds the MFD core.
The patchset looks fairly good, but before merging it I'd like to know of we
could merge it with this one:
https://patchwork.kernel.org/patch/106173/

I don't know enough about the hardware, and although the register layouts don't
look like they have much in common, I'd like to know from the actual HW
manufacturer (i.e. you :)) if there's something we can do here.
I'm cc'ing Luotao here so that we get his input as well.

Cheers,
Samuel.


> Acked-by: Linus Walleij <linus.walleij@...ricsson.com>
> Signed-off-by: Rabin Vincent <rabin.vincent@...ricsson.com>
> ---
>  drivers/mfd/Kconfig       |   12 +
>  drivers/mfd/Makefile      |    1 +
>  drivers/mfd/stmpe.c       |  600 +++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/stmpe.h |  135 ++++++++++
>  4 files changed, 748 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mfd/stmpe.c
>  create mode 100644 include/linux/mfd/stmpe.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9da0e50..e4ee19d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -177,6 +177,18 @@ config TWL4030_CODEC
>  	select MFD_CORE
>  	default n
>  
> +config MFD_STMPE
> +	bool "Support STMicroelectronics STMPExxxx"
> +	depends on I2C=y && GENERIC_HARDIRQS
> +	select MFD_CORE
> +	help
> +	  Support for the STMPExxxx family of I/O Expanders from
> +	  STMicroelectronics.
> +
> +	  This driver provides common support for accessing the device,
> +	  additional drivers must be enabled in order to use the
> +	  functionality of the device.
> +
>  config MFD_TC35892
>  	bool "Support Toshiba TC35892"
>  	depends on I2C=y && GENERIC_HARDIRQS
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index fb503e7..4410747 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
>  obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
>  obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
>  
> +obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
>  obj-$(CONFIG_MFD_TC35892)	+= tc35892.o
>  obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
>  obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> new file mode 100644
> index 0000000..53e72b6
> --- /dev/null
> +++ b/drivers/mfd/stmpe.c
> @@ -0,0 +1,600 @@
> +/*
> + * Copyright (C) ST-Ericsson SA 2010
> + *
> + * License Terms: GNU General Public License, version 2
> + * Author: Rabin Vincent <rabin.vincent@...ricsson.com> for ST-Ericsson
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/stmpe.h>
> +
> +/* Interrupts */
> +#define STMPE_INT_GPIOC		8
> +#define STMPE1601_INT_PWM3	7
> +#define STMPE1601_INT_PWM2	6
> +#define STMPE1601_INT_PWM1	5
> +#define STMPE1601_INT_PWM0	4
> +#define STMPE24XX_INT_PWM2	7
> +#define STMPE24XX_INT_PWM1	6
> +#define STMPE24XX_INT_PWM0	5
> +#define STMPE24XX_INT_ROT_OVER	4
> +#define STMPE24XX_INT_ROT	3
> +#define STMPE_INT_KEYPAD_OVER	2
> +#define STMPE_INT_KEYPAD	1
> +#define STMPE_INT_WAKEUP	0
> +
> +/* Core registers at same addresses on all variants */
> +#define STMPE_ICR_LSB		0x11
> +#define STMPE_IER_LSB		0x13
> +#define STMPE_ISR_MSB		0x14
> +#define STMPE_CHIP_ID		0x80
> +
> +#define STMPE_ICR_LSB_HIGH	(1 << 2)
> +#define STMPE_ICR_LSB_EDGE	(1 << 1)
> +#define STMPE_ICR_LSB_GIM	(1 << 0)
> +
> +/*
> + * The following registers are at different addresses on different variants.
> + * We provide a set of register indices and a translation table.
> + */
> +
> +#define STMPE1601_INT_EN_GPIO_MASK_LSB	0x17
> +#define STMPE1601_INT_STA_GPIO_MSB	0x18
> +#define STMPE1601_GPIO_MP_LSB		0x87
> +#define STMPE1601_GPIO_SET_LSB		0x83
> +#define STMPE1601_GPIO_CLR_LSB		0x85
> +#define STMPE1601_GPIO_SET_DIR_LSB	0x89
> +#define STMPE1601_GPIO_ED_MSB		0x8A
> +#define STMPE1601_GPIO_RE_LSB		0x8D
> +#define STMPE1601_GPIO_FE_LSB		0x8F
> +#define STMPE1601_GPIO_AF_U_MSB		0x92
> +
> +#define STMPE24XX_IEGPIOR_LSB		0x18
> +#define STMPE24XX_ISGPIOR_MSB		0x19
> +#define STMPE24XX_GPMR_LSB		0xA5
> +#define STMPE24XX_GPSR_LSB		0x85
> +#define STMPE24XX_GPCR_LSB		0x88
> +#define STMPE24XX_GPDR_LSB		0x8B
> +#define STMPE24XX_GPEDR_MSB		0x8C
> +#define STMPE24XX_GPRER_LSB		0x91
> +#define STMPE24XX_GPFER_LSB		0x94
> +#define STMPE24XX_GPAFR_U_MSB		0x9B
> +
> +static const u8 stmpe1601_regs[] = {
> +	[STMPE_IDX_GPMR_LSB]	= STMPE1601_GPIO_MP_LSB,
> +	[STMPE_IDX_GPSR_LSB]	= STMPE1601_GPIO_SET_LSB,
> +	[STMPE_IDX_GPCR_LSB]	= STMPE1601_GPIO_CLR_LSB,
> +	[STMPE_IDX_GPDR_LSB]	= STMPE1601_GPIO_SET_DIR_LSB,
> +	[STMPE_IDX_GPRER_LSB]	= STMPE1601_GPIO_RE_LSB,
> +	[STMPE_IDX_GPFER_LSB]	= STMPE1601_GPIO_FE_LSB,
> +	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_GPIO_AF_U_MSB,
> +	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_INT_EN_GPIO_MASK_LSB,
> +	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_INT_STA_GPIO_MSB,
> +	[STMPE_IDX_GPEDR_MSB]	= STMPE1601_GPIO_ED_MSB,
> +};
> +
> +static const u8 stmpe24xx_regs[] = {
> +	[STMPE_IDX_GPMR_LSB]	= STMPE24XX_GPMR_LSB,
> +	[STMPE_IDX_GPSR_LSB]	= STMPE24XX_GPSR_LSB,
> +	[STMPE_IDX_GPCR_LSB]	= STMPE24XX_GPCR_LSB,
> +	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_GPDR_LSB,
> +	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_GPRER_LSB,
> +	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_GPFER_LSB,
> +	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_GPAFR_U_MSB,
> +	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_IEGPIOR_LSB,
> +	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_ISGPIOR_MSB,
> +	[STMPE_IDX_GPEDR_MSB]	= STMPE24XX_GPEDR_MSB,
> +};
> +
> +/**
> + * stmpe_reg_read() - read a single STMPE register
> + * @stmpe:	Device to read from
> + * @reg:	Register to read
> + */
> +int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_read_byte_data(stmpe->i2c, reg);
> +	if (ret < 0)
> +		dev_err(stmpe->dev, "failed to read reg %#x: %d\n",
> +			reg, ret);
> +
> +	dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(stmpe_reg_read);
> +
> +/**
> + * stmpe_reg_write() - write a single STMPE register
> + * @stmpe:	Device to write to
> + * @reg:	Register to write
> + * @val:	Value to write
> + */
> +int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
> +{
> +	int ret;
> +
> +	dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
> +
> +	ret = i2c_smbus_write_byte_data(stmpe->i2c, reg, val);
> +	if (ret < 0)
> +		dev_err(stmpe->dev, "failed to write reg %#x: %d\n",
> +			reg, ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(stmpe_reg_write);
> +
> +/**
> + * stmpe_set_bits() - set the value of a bitfield in a STMPE register
> + * @stmpe:	Device to write to
> + * @reg:	Register to write
> + * @mask:	Mask of bits to set
> + * @val:	Value to set
> + */
> +int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
> +{
> +	int ret;
> +
> +	mutex_lock(&stmpe->lock);
> +
> +	ret = stmpe_reg_read(stmpe, reg);
> +	if (ret < 0)
> +		goto out;
> +
> +	ret &= ~mask;
> +	ret |= val;
> +
> +	ret = stmpe_reg_write(stmpe, reg, ret);
> +
> +out:
> +	mutex_unlock(&stmpe->lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL(stmpe_set_bits);
> +
> +/**
> + * stmpe_block_read() - read multiple STMPE registers
> + * @stmpe:	Device to read from
> + * @reg:	First register
> + * @length:	Number of registers
> + * @values:	Buffer to write to
> + */
> +int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
> +{
> +	int ret;
> +
> +	ret = i2c_smbus_read_i2c_block_data(stmpe->i2c, reg, length, values);
> +	if (ret < 0)
> +		dev_err(stmpe->dev, "failed to read regs %#x: %d\n",
> +			reg, ret);
> +
> +	dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
> +#ifdef VERBOSE_DEBUG
> +	print_hex_dump_bytes("stmpe rd: ", DUMP_PREFIX_OFFSET, values, length);
> +#endif
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(stmpe_block_read);
> +
> +/**
> + * stmpe_block_write() - write multiple STMPE registers
> + * @stmpe:	Device to write to
> + * @reg:	First register
> + * @length:	Number of registers
> + * @values:	Values to write
> + */
> +int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
> +			const u8 *values)
> +{
> +	int ret;
> +
> +	dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
> +#ifdef VERBOSE_DEBUG
> +	print_hex_dump_bytes("stmpe wr: ", DUMP_PREFIX_OFFSET, values, length);
> +#endif
> +
> +	ret = i2c_smbus_write_i2c_block_data(stmpe->i2c, reg, length,
> +					     values);
> +	if (ret < 0)
> +		dev_err(stmpe->dev, "failed to write regs %#x: %d\n",
> +			reg, ret);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(stmpe_block_write);
> +
> +/**
> + * stmpe_set_altfunc: set the alternate function for STMPE pins
> + * @stmpe:	Device to configure
> + * @pins:	Bitmask of pins to affect
> + * @af:		Alternate function number (0 - 3)
> + *
> + * @pins is assumed to have a bit set for each of the bits whose alternate
> + * function is to be changed, numbered according to the GPIOXY numbers.
> + *
> + * If the GPIO module is not enabled, this function automatically enables it in
> + * order to perform the change.
> + */
> +int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, int af)
> +{
> +	u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
> +	int numregs = stmpe->num_gpios / 4;
> +	u8 regs[numregs];
> +	bool gpioon;
> +	int syscon;
> +	int ret;
> +
> +	mutex_lock(&stmpe->lock);
> +
> +	syscon = stmpe_reg_read(stmpe, STMPE_SYSCON);
> +	if (syscon < 0)
> +		return syscon;
> +
> +	gpioon = syscon & STMPE_SYSCON_ENABLE_GPIO;
> +	if (!gpioon) {
> +		ret = stmpe_reg_write(stmpe, STMPE_SYSCON,
> +				      syscon | STMPE_SYSCON_ENABLE_GPIO);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	ret = stmpe_block_read(stmpe, regaddr, numregs, regs);
> +	if (ret < 0)
> +		goto out;
> +
> +	while (pins) {
> +		int pin = __ffs(pins);
> +		int regoffset = numregs - (pin / 4) - 1;
> +		int pos = (pin % 4) * 2;
> +
> +		regs[regoffset] &= ~(0x3 << pos);
> +		regs[regoffset] |= af << pos;
> +
> +		pins &= ~(1 << pin);
> +	}
> +
> +	ret = stmpe_block_write(stmpe, regaddr, numregs, regs);
> +
> +	if (!gpioon)
> +		stmpe_reg_write(stmpe, STMPE_SYSCON, syscon);
> +
> +out:
> +	mutex_unlock(&stmpe->lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
> +
> +static struct resource gpio_resources[] = {
> +	{
> +		.start	= STMPE_INT_GPIOC,
> +		.end	= STMPE_INT_GPIOC,
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct resource keypad_resources[] = {
> +	{
> +		.start	= STMPE_INT_KEYPAD,
> +		.end	= STMPE_INT_KEYPAD,
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +	{
> +		.start	= STMPE_INT_KEYPAD_OVER,
> +		.end	= STMPE_INT_KEYPAD_OVER,
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct mfd_cell stmpe_devs[] = {
> +	{
> +		.name		= "stmpe-gpio",
> +		.resources	= gpio_resources,
> +		.num_resources	= ARRAY_SIZE(gpio_resources),
> +	},
> +	{
> +		.name		= "stmpe-keypad",
> +		.resources	= keypad_resources,
> +		.num_resources	= ARRAY_SIZE(keypad_resources),
> +	},
> +};
> +
> +static irqreturn_t stmpe_irq(int irq, void *data)
> +{
> +	struct stmpe *stmpe = data;
> +	int num = ARRAY_SIZE(stmpe->ier);
> +	u8 isr[num];
> +	int ret;
> +	int i;
> +
> +	ret = stmpe_block_read(stmpe, STMPE_ISR_MSB, num, isr);
> +	if (ret < 0)
> +		return IRQ_NONE;
> +
> +	for (i = 0; i < num; i++) {
> +		int bank = num - i - 1;
> +		u8 status = isr[i];
> +		u8 clear;
> +
> +		status &= stmpe->ier[bank];
> +		if (!status)
> +			continue;
> +
> +		clear = status;
> +		while (status) {
> +			int bit = __ffs(status);
> +			int line = bank * 8 + bit;
> +
> +			handle_nested_irq(stmpe->irq_base + line);
> +			status &= ~(1 << bit);
> +		}
> +
> +		stmpe_reg_write(stmpe, STMPE_ISR_MSB + i, clear);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void stmpe_irq_lock(unsigned int irq)
> +{
> +	struct stmpe *stmpe = get_irq_chip_data(irq);
> +
> +	mutex_lock(&stmpe->irq_lock);
> +}
> +
> +static void stmpe_irq_sync_unlock(unsigned int irq)
> +{
> +	struct stmpe *stmpe = get_irq_chip_data(irq);
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(stmpe->ier); i++) {
> +		u8 new = stmpe->ier[i];
> +		u8 old = stmpe->oldier[i];
> +
> +		if (new == old)
> +			continue;
> +
> +		stmpe->oldier[i] = new;
> +		stmpe_reg_write(stmpe, STMPE_IER_LSB - i, new);
> +	}
> +
> +	mutex_unlock(&stmpe->irq_lock);
> +}
> +
> +static void stmpe_irq_mask(unsigned int irq)
> +{
> +	struct stmpe *stmpe = get_irq_chip_data(irq);
> +	int offset = irq - stmpe->irq_base;
> +	int regoffset = offset / 8;
> +	int mask = 1 << (offset % 8);
> +
> +	stmpe->ier[regoffset] &= ~mask;
> +}
> +
> +static void stmpe_irq_unmask(unsigned int irq)
> +{
> +	struct stmpe *stmpe = get_irq_chip_data(irq);
> +	int offset = irq - stmpe->irq_base;
> +	int regoffset = offset / 8;
> +	int mask = 1 << (offset % 8);
> +
> +	stmpe->ier[regoffset] |= mask;
> +}
> +
> +static struct irq_chip stmpe_irq_chip = {
> +	.name			= "stmpe",
> +	.bus_lock		= stmpe_irq_lock,
> +	.bus_sync_unlock	= stmpe_irq_sync_unlock,
> +	.mask			= stmpe_irq_mask,
> +	.unmask			= stmpe_irq_unmask,
> +};
> +
> +static int __devinit stmpe_irq_init(struct stmpe *stmpe)
> +{
> +	int base = stmpe->irq_base;
> +	int irq;
> +
> +	for (irq = base; irq < base + STMPE_NR_INTERNAL_IRQS; irq++) {
> +		set_irq_chip_data(irq, stmpe);
> +		set_irq_chip_and_handler(irq, &stmpe_irq_chip,
> +					 handle_edge_irq);
> +		set_irq_nested_thread(irq, 1);
> +#ifdef CONFIG_ARM
> +		set_irq_flags(irq, IRQF_VALID);
> +#else
> +		set_irq_noprobe(irq);
> +#endif
> +	}
> +
> +	return 0;
> +}
> +
> +static void stmpe_irq_remove(struct stmpe *stmpe)
> +{
> +	int base = stmpe->irq_base;
> +	int irq;
> +
> +	for (irq = base; irq < base + STMPE_NR_INTERNAL_IRQS; irq++) {
> +#ifdef CONFIG_ARM
> +		set_irq_flags(irq, 0);
> +#endif
> +		set_irq_chip_and_handler(irq, NULL, NULL);
> +		set_irq_chip_data(irq, NULL);
> +	}
> +}
> +
> +static int __devinit stmpe_chip_init(struct stmpe *stmpe)
> +{
> +	unsigned int irq_trigger = stmpe->pdata->irq_trigger;
> +	u8 icr = STMPE_ICR_LSB_GIM;
> +	const char *name;
> +	unsigned int id;
> +	u8 data[2];
> +	int ret;
> +
> +	ret = stmpe_block_read(stmpe, STMPE_CHIP_ID, ARRAY_SIZE(data), data);
> +	if (ret < 0)
> +		return ret;
> +
> +	id = (data[0] << 8) | data[1];
> +
> +	switch (id) {
> +	case 0x0210:
> +	case 0x0212:
> +		name = "STMPE1601";
> +		stmpe->variant = STMPE1601;
> +		stmpe->regs = stmpe1601_regs;
> +		stmpe->num_gpios = 16;
> +		break;
> +
> +	case 0x0101:
> +		name = "STMPE2401";
> +		stmpe->variant = STMPE2401;
> +		stmpe->regs = stmpe24xx_regs;
> +		stmpe->num_gpios = 24;
> +		break;
> +
> +	case 0x0120:
> +		name = "STMPE2403";
> +		stmpe->variant = STMPE2403;
> +		stmpe->regs = stmpe24xx_regs;
> +		stmpe->num_gpios = 24;
> +		break;
> +
> +	default:
> +		dev_err(stmpe->dev, "unknown id: %#x\n", id);
> +		return -EINVAL;
> +	}
> +
> +	dev_info(stmpe->dev, "%s detected\n", name);
> +
> +	/* Disable all modules -- subdrivers should enable what they need. */
> +	ret = stmpe_set_bits(stmpe, STMPE_SYSCON, STMPE_SYSCON_ENABLE, 0);
> +	if (ret)
> +		return ret;
> +
> +	if (irq_trigger == IRQF_TRIGGER_FALLING ||
> +	    irq_trigger == IRQF_TRIGGER_RISING)
> +		icr |= STMPE_ICR_LSB_EDGE;
> +
> +	if (irq_trigger == IRQF_TRIGGER_RISING ||
> +	    irq_trigger == IRQF_TRIGGER_HIGH)
> +		icr |= STMPE_ICR_LSB_HIGH;
> +
> +	return stmpe_reg_write(stmpe, STMPE_ICR_LSB, icr);
> +}
> +
> +static int __devinit stmpe_probe(struct i2c_client *i2c,
> +				 const struct i2c_device_id *id)
> +{
> +	struct stmpe_platform_data *pdata = i2c->dev.platform_data;
> +	struct stmpe *stmpe;
> +	int ret;
> +
> +	if (!pdata)
> +		return -EINVAL;
> +
> +	stmpe = kzalloc(sizeof(struct stmpe), GFP_KERNEL);
> +	if (!stmpe)
> +		return -ENOMEM;
> +
> +	mutex_init(&stmpe->irq_lock);
> +	mutex_init(&stmpe->lock);
> +
> +	stmpe->dev = &i2c->dev;
> +	stmpe->i2c = i2c;
> +
> +	stmpe->pdata = pdata;
> +	stmpe->irq_base = pdata->irq_base;
> +
> +	i2c_set_clientdata(i2c, stmpe);
> +
> +	ret = stmpe_chip_init(stmpe);
> +	if (ret)
> +		goto out_free;
> +
> +	ret = stmpe_irq_init(stmpe);
> +	if (ret)
> +		goto out_free;
> +
> +	ret = request_threaded_irq(stmpe->i2c->irq, NULL, stmpe_irq,
> +				   pdata->irq_trigger | IRQF_ONESHOT,
> +				   "stmpe", stmpe);
> +	if (ret) {
> +		dev_err(stmpe->dev, "failed to request IRQ: %d\n", ret);
> +		goto out_removeirq;
> +	}
> +
> +	ret = mfd_add_devices(stmpe->dev, pdata->id, stmpe_devs,
> +			      ARRAY_SIZE(stmpe_devs), NULL,
> +			      stmpe->irq_base);
> +	if (ret) {
> +		dev_err(stmpe->dev, "failed to add children\n");
> +		goto out_freeirq;
> +	}
> +
> +	return 0;
> +
> +out_freeirq:
> +	free_irq(stmpe->i2c->irq, stmpe);
> +out_removeirq:
> +	stmpe_irq_remove(stmpe);
> +out_free:
> +	i2c_set_clientdata(i2c, NULL);
> +	kfree(stmpe);
> +	return ret;
> +}
> +
> +static int __devexit stmpe_remove(struct i2c_client *client)
> +{
> +	struct stmpe *stmpe = i2c_get_clientdata(client);
> +
> +	mfd_remove_devices(stmpe->dev);
> +
> +	free_irq(stmpe->i2c->irq, stmpe);
> +	stmpe_irq_remove(stmpe);
> +
> +	i2c_set_clientdata(client, NULL);
> +	kfree(stmpe);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id stmpe_id[] = {
> +	{ "stmpe", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, stmpe_id);
> +
> +static struct i2c_driver stmpe_driver = {
> +	.driver.name	= "stmpe",
> +	.driver.owner	= THIS_MODULE,
> +	.probe		= stmpe_probe,
> +	.remove		= __devexit_p(stmpe_remove),
> +	.id_table	= stmpe_id,
> +};
> +
> +static int __init stmpe_init(void)
> +{
> +	return i2c_add_driver(&stmpe_driver);
> +}
> +subsys_initcall(stmpe_init);
> +
> +static void __exit stmpe_exit(void)
> +{
> +	i2c_del_driver(&stmpe_driver);
> +}
> +module_exit(stmpe_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("STMPExxxx MFD core driver");
> +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@...ricsson.com>");
> diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h
> new file mode 100644
> index 0000000..7c6733b
> --- /dev/null
> +++ b/include/linux/mfd/stmpe.h
> @@ -0,0 +1,135 @@
> +/*
> + * Copyright (C) ST-Ericsson SA 2010
> + *
> + * License Terms: GNU General Public License, version 2
> + * Author: Rabin Vincent <rabin.vincent@...ricsson.com> for ST-Ericsson
> + */
> +
> +#ifndef __LINUX_MFD_STMPE_H
> +#define __LINUX_MFD_STMPE_H
> +
> +#include <linux/device.h>
> +
> +#define STMPE_SYSCON			0x02
> +
> +#define STMPE_SYSCON_ENABLE		(0xf << 0)
> +#define STMPE_SYSCON_ENABLE_GPIO	(1 << 3)
> +#define STMPE24XX_SYSCON_ENABLE_PWM	(1 << 2)
> +#define STMPE_SYSCON_ENABLE_KPC		(1 << 1)
> +#define STMPE16XX_SYSCON_ENABLE_SPWM	(1 << 0)
> +#define STMPE24XX_SYSCON_ENABLE_ROT	(1 << 0)
> +
> +enum stmpe_variant {
> +	STMPE1601,
> +	STMPE2401,
> +	STMPE2403,
> +};
> +
> +/*
> + * For registers whose locations differ on variants,  the correct address is
> + * obtained by indexing stmpe->regs with one of the following.
> + */
> +enum {
> +	STMPE_IDX_GPMR_LSB,
> +	STMPE_IDX_GPSR_LSB,
> +	STMPE_IDX_GPCR_LSB,
> +	STMPE_IDX_GPDR_LSB,
> +	STMPE_IDX_GPEDR_MSB,
> +	STMPE_IDX_GPRER_LSB,
> +	STMPE_IDX_GPFER_LSB,
> +	STMPE_IDX_GPAFR_U_MSB,
> +	STMPE_IDX_IEGPIOR_LSB,
> +	STMPE_IDX_ISGPIOR_MSB,
> +};
> +
> +/**
> + * struct stmpe - STMPE MFD structure
> + * @lock: lock protecting I/O operations
> + * @irq_lock: IRQ bus lock
> + * @dev: device, mostly for dev_dbg()
> + * @i2c: i2c client
> + * @variant: the detected STMPExxxx model number
> + * @regs: list of addresses of registers which are at different addresses on
> + *	  different variants.  Indexed by one of STMPE_IDX_*.
> + * @irq_base: starting IRQ number for internal IRQs
> + * @num_gpios: number of gpios, differs for variants
> + * @ier: cache of IER registers for bus_lock
> + * @oldier: cache of IER registers for bus_lock
> + * @pdata: platform data
> + */
> +struct stmpe {
> +	struct mutex lock;
> +	struct mutex irq_lock;
> +	struct device *dev;
> +	struct i2c_client *i2c;
> +	enum stmpe_variant variant;
> +	const u8 *regs;
> +
> +	int irq_base;
> +	int num_gpios;
> +	u8 ier[2];
> +	u8 oldier[2];
> +	struct stmpe_platform_data *pdata;
> +};
> +
> +extern int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 data);
> +extern int stmpe_reg_read(struct stmpe *stmpe, u8 reg);
> +extern int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
> +			    u8 *values);
> +extern int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
> +			     const u8 *values);
> +extern int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val);
> +extern int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, int af);
> +
> +struct matrix_keymap_data;
> +
> +/**
> + * struct stmpe_keypad_platform_data - STMPE keypad platform data
> + * @keymap_data: key map table and size
> + * @debounce_ms: debounce interval, in ms.  Maximum is
> + *		 %STMPE_KEYPAD_MAX_DEBOUNCE.
> + * @scan_count: number of key scanning cycles to confirm key data.
> + *		Maximum is %STMPE_KEYPAD_MAX_SCAN_COUNT.
> + * @no_autorepeat: disable key autorepeat
> + */
> +struct stmpe_keypad_platform_data {
> +	struct matrix_keymap_data *keymap_data;
> +	unsigned int debounce_ms;
> +	unsigned int scan_count;
> +	bool no_autorepeat;
> +};
> +
> +/**
> + * struct stmpe_gpio_platform_data - STMPE GPIO platform data
> + * @gpio_base: first gpio number assigned.  A maximum of
> + *	       %STMPE_NR_GPIOS GPIOs will be allocated.
> + */
> +struct stmpe_gpio_platform_data {
> +	int gpio_base;
> +};
> +
> +/**
> + * struct stmpe_platform_data - STMPE platform data
> + * @id: device id to distinguish between multiple STMPEs on the same board
> + * @irq_trigger: IRQ trigger to use for the interrupt to the host
> + * @irq_base: base IRQ number.  %STMPE_NR_IRQS irqs will be used, or
> + *	      %STMPE_NR_INTERNAL_IRQS if the GPIO driver is not used.
> + * @gpio: GPIO-specific platform data
> + * @keypad: keypad-specific platform data
> + */
> +struct stmpe_platform_data {
> +	int id;
> +	int irq_base;
> +	unsigned int irq_trigger;
> +
> +	struct stmpe_gpio_platform_data *gpio;
> +	struct stmpe_keypad_platform_data *keypad;
> +};
> +
> +#define STMPE_NR_INTERNAL_IRQS	9
> +#define STMPE_INT_GPIO(x)	(STMPE_NR_INTERNAL_IRQS + (x))
> +
> +#define STMPE_NR_GPIOS		24
> +#define STMPE_NR_IRQS		STMPE_INT_GPIO(STMPE_NR_GPIOS)
> +
> +#endif
> -- 
> 1.7.0
> 

-- 
Intel Open Source Technology Centre
http://oss.intel.com/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists