| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1278968210-6827-1-git-send-email-kev@cypress.com>
Date: Mon, 12 Jul 2010 13:56:49 -0700
From: Kevin McNeely <kev@...ress.com>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>
Cc: David Brown <davidb@...eaurora.org>,
Trilok Soni <tsoni@...eaurora.org>,
Fred <fwk@...ntu.linuxcertified.com>,
Kevin McNeely <kev@...ress.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Samuel Ortiz <sameo@...ux.intel.com>,
Eric Miao <eric.y.miao@...il.com>,
Mark Brown <broonie@...nsource.wolfsonmicro.com>,
Simtec Linux Team <linux@...tec.co.uk>,
Arnaud Patard <arnaud.patard@...-net.org>,
Antonio Ospite <ospite@...denti.unina.it>,
Henrik Rydberg <rydberg@...omail.se>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] i2c: cyttsp i2c touchscreen driver init submit
From: Fred <fwk@...ntu.linuxcertified.com>
This is a new touchscreen driver for the Cypress Semiconductor
cyttsp family of devices. This driver is for the i2c version
of cyttsp parts.
Signed-off-by: Kevin McNeely <kev@...ress.com>
---
drivers/input/touchscreen/Kconfig | 13 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp-i2c.c | 2016 ++++++++++++++++++++++++++++++++
include/linux/cyttsp.h | 649 ++++++++++
4 files changed, 2679 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/cyttsp-i2c.c
create mode 100644 include/linux/cyttsp.h
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3b9d5e2..a7a69a0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -603,4 +603,17 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+config TOUCHSCREEN_CYTTSP_I2C
+ default n
+ tristate "Cypress TTSP i2c touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have a Cypress TTSP touchscreen
+ connected to your system's i2c bus.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_i2c.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 497964a..2026cb8 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp-i2c.o
diff --git a/drivers/input/touchscreen/cyttsp-i2c.c b/drivers/input/touchscreen/cyttsp-i2c.c
new file mode 100644
index 0000000..8397aa1
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp-i2c.c
@@ -0,0 +1,2016 @@
+/* Source for:
+ * Cypress TrueTouch(TM) Standard Product I2C touchscreen driver.
+ * drivers/input/touchscreen/cyttsp-i2c.c
+ *
+ * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Cypress reserves the right to make changes without further notice
+ * to the materials described herein. Cypress does not assume any
+ * liability arising out of the application described herein.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/byteorder/generic.h>
+#include <linux/bitops.h>
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+
+#define CY_DECLARE_GLOBALS
+
+#include <linux/cyttsp.h>
+
+uint32_t cyttsp_tsdebug1 = 0xff;
+module_param_named(tsdebug1, cyttsp_tsdebug1, uint, 0664);
+
+/* CY TTSP I2C Driver private data */
+struct cyttsp {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct work_struct work;
+ struct timer_list timer;
+ struct mutex mutex;
+ char phys[32];
+ struct cyttsp_platform_data *platform_data;
+ u8 num_prv_st_tch;
+ u16 act_trk[CY_NUM_TRK_ID];
+ u16 prv_st_tch[CY_NUM_ST_TCH_ID];
+ u16 prv_mt_tch[CY_NUM_MT_TCH_ID];
+ u16 prv_mt_pos[CY_NUM_TRK_ID][2];
+ atomic_t irq_enabled;
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct early_suspend early_suspend;
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+};
+static u8 irq_cnt; /* comparison counter with register valuw */
+static u32 irq_cnt_total; /* total interrupts */
+static u32 irq_err_cnt; /* count number of touch interrupts with err */
+#define CY_IRQ_CNT_MASK 0x000000FF /* mapped for sizeof count in reg */
+#define CY_IRQ_CNT_REG 0x00 /* tt_undef[0]=reg 0x1B - Gen3 only */
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void cyttsp_early_suspend(struct early_suspend *handler);
+static void cyttsp_late_resume(struct early_suspend *handler);
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+
+static struct workqueue_struct *cyttsp_ts_wq;
+
+
+/* ****************************************************************************
+ * Prototypes for static functions
+ * ************************************************************************** */
+static void cyttsp_xy_worker(struct work_struct *work);
+static irqreturn_t cyttsp_irq(int irq, void *handle);
+static int cyttsp_inlist(u16 prev_track[],
+ u8 cur_trk_id, u8 *prev_loc, u8 num_touches);
+static int cyttsp_next_avail_inlist(u16 cur_trk[],
+ u8 *new_loc, u8 num_touches);
+static int cyttsp_putbl(struct cyttsp *ts, int show,
+ int show_status, int show_version, int show_cid);
+static int __devinit cyttsp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id);
+static int __devexit cyttsp_remove(struct i2c_client *client);
+static int cyttsp_resume(struct i2c_client *client);
+static int cyttsp_suspend(struct i2c_client *client, pm_message_t message);
+
+/* Static variables */
+static struct cyttsp_gen3_xydata_t g_xy_data;
+static struct cyttsp_bootloader_data_t g_bl_data;
+static struct cyttsp_sysinfo_data_t g_sysinfo_data;
+static const struct i2c_device_id cyttsp_id[] = {
+ { CY_I2C_NAME, 0 }, { }
+};
+static u8 bl_cmd[] = {
+ CY_BL_FILE0, CY_BL_CMD, CY_BL_EXIT,
+ CY_BL_KEY0, CY_BL_KEY1, CY_BL_KEY2,
+ CY_BL_KEY3, CY_BL_KEY4, CY_BL_KEY5,
+ CY_BL_KEY6, CY_BL_KEY7};
+
+MODULE_DEVICE_TABLE(i2c, cyttsp_id);
+
+static struct i2c_driver cyttsp_driver = {
+ .driver = {
+ .name = CY_I2C_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = cyttsp_probe,
+ .remove = __devexit_p(cyttsp_remove),
+ .suspend = cyttsp_suspend,
+ .resume = cyttsp_resume,
+ .id_table = cyttsp_id,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver");
+MODULE_AUTHOR("Cypress");
+
+static ssize_t cyttsp_irq_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct cyttsp *ts = i2c_get_clientdata(client);
+ return sprintf(buf, "%u\n", atomic_read(&ts->irq_enabled));
+}
+
+static ssize_t cyttsp_irq_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+ struct cyttsp *ts = i2c_get_clientdata(client);
+ int err = 0;
+ unsigned long value;
+
+ if (size > 2)
+ return -EINVAL;
+
+ err = strict_strtoul(buf, 10, &value);
+ if (err != 0)
+ return err;
+
+ switch (value) {
+ case 0:
+ if (atomic_cmpxchg(&ts->irq_enabled, 1, 0)) {
+ pr_info("touch irq disabled!\n");
+ disable_irq_nosync(ts->client->irq);
+ }
+ err = size;
+ break;
+ case 1:
+ if (!atomic_cmpxchg(&ts->irq_enabled, 0, 1)) {
+ pr_info("touch irq enabled!\n");
+ enable_irq(ts->client->irq);
+ }
+ err = size;
+ break;
+ default:
+ pr_info("cyttsp_irq_enable failed -> irq_enabled = %d\n",
+ atomic_read(&ts->irq_enabled));
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static DEVICE_ATTR(irq_enable, 0777, cyttsp_irq_status, cyttsp_irq_enable);
+
+/* The cyttsp_xy_worker function reads the XY coordinates and sends them to
+ * the input layer. It is scheduled from the interrupt (or timer).
+ */
+void cyttsp_xy_worker(struct work_struct *work)
+{
+ struct cyttsp *ts = container_of(work, struct cyttsp, work);
+ u8 id, tilt, rev_x, rev_y;
+ u8 i, loc;
+ u8 prv_tch; /* number of previous touches */
+ u8 cur_tch; /* number of current touches */
+ u16 tmp_trk[CY_NUM_MT_TCH_ID];
+ u16 snd_trk[CY_NUM_MT_TCH_ID];
+ u16 cur_trk[CY_NUM_TRK_ID];
+ u16 cur_st_tch[CY_NUM_ST_TCH_ID];
+ u16 cur_mt_tch[CY_NUM_MT_TCH_ID];
+ /* if NOT CY_USE_TRACKING_ID then
+ * only uses CY_NUM_MT_TCH_ID positions */
+ u16 cur_mt_pos[CY_NUM_TRK_ID][2];
+ /* if NOT CY_USE_TRACKING_ID then
+ * only uses CY_NUM_MT_TCH_ID positions */
+ u8 cur_mt_z[CY_NUM_TRK_ID];
+ u8 curr_tool_width;
+ u16 st_x1, st_y1;
+ u8 st_z1;
+ u16 st_x2, st_y2;
+ u8 st_z2;
+ s32 retval;
+
+ cyttsp_xdebug("TTSP worker start 1:\n");
+
+ /* get event data from CYTTSP device */
+ i = CY_NUM_RETRY;
+ do {
+ retval = i2c_smbus_read_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(struct cyttsp_gen3_xydata_t), (u8 *)&g_xy_data);
+ } while ((retval < CY_OK) && --i);
+
+ if (retval < CY_OK) {
+ /* return immediately on
+ * failure to read device on the i2c bus */
+ goto exit_xy_worker;
+ }
+
+ cyttsp_xdebug("TTSP worker start 2:\n");
+
+ /* compare own irq counter with the device irq counter */
+ if (ts->client->irq) {
+ u8 host_reg;
+ u8 cur_cnt;
+ if (ts->platform_data->use_hndshk) {
+
+ host_reg = g_xy_data.hst_mode & CY_HNDSHK_BIT ?
+ g_xy_data.hst_mode & ~CY_HNDSHK_BIT :
+ g_xy_data.hst_mode | CY_HNDSHK_BIT;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE, sizeof(host_reg), &host_reg);
+ }
+ cur_cnt = g_xy_data.tt_undef[CY_IRQ_CNT_REG];
+ irq_cnt_total++;
+ irq_cnt++;
+ if (irq_cnt != cur_cnt) {
+ irq_err_cnt++;
+ cyttsp_debug("i_c_ER: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
+ irq_cnt, \
+ cur_cnt, g_xy_data.hst_mode, \
+ (unsigned long)irq_cnt_total, \
+ (unsigned long)irq_err_cnt);
+ } else {
+ cyttsp_debug("i_c_ok: dv=%d fw=%d hm=%02X t=%lu te=%lu\n", \
+ irq_cnt, \
+ cur_cnt, g_xy_data.hst_mode, \
+ (unsigned long)irq_cnt_total, \
+ (unsigned long)irq_err_cnt);
+ }
+ irq_cnt = cur_cnt;
+ }
+
+ /* Get the current num touches and return if there are no touches */
+ if ((GET_BOOTLOADERMODE(g_xy_data.tt_mode) == 1) ||
+ (GET_HSTMODE(g_xy_data.hst_mode) != CY_OK)) {
+ u8 host_reg, tries;
+ /* the TTSP device has suffered spurious reset or mode switch */
+ cyttsp_debug( \
+ "Spurious err opmode (tt_mode=%02X hst_mode=%02X)\n", \
+ g_xy_data.tt_mode, g_xy_data.hst_mode);
+ cyttsp_debug("Reset TTSP Device; Terminating active tracks\n");
+ /* terminate all active tracks */
+ cur_tch = CY_NTCH;
+ /* reset TTSP part and take it back out of Bootloader mode */
+ host_reg = CY_SOFT_RESET_MODE;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ tries = 0;
+ do {
+ mdelay(1000);
+
+ /* set arg2 to non-0 to activate */
+ retval = cyttsp_putbl(ts, 1, false, false, false);
+ } while (!(retval < CY_OK) &&
+ !GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
+ !(g_bl_data.bl_file ==
+ CY_OP_MODE + CY_LOW_PWR_MODE) &&
+ tries++ < 10);
+ /* switch back to operational mode */
+ if (GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(bl_cmd), bl_cmd);
+ tries = 0;
+ do {
+ mdelay(1000);
+ cyttsp_putbl(ts, 1, false, false, false);
+ } while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
+ tries++ < 10);
+ }
+ if (!(retval < CY_OK)) {
+ host_reg = CY_OP_MODE
+ /* + CY_LOW_PWR_MODE */;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete switch to Op mode */
+ mdelay(1000);
+ }
+ goto exit_xy_worker;
+ } else {
+ cur_tch = GET_NUM_TOUCHES(g_xy_data.tt_stat);
+ if (IS_LARGE_AREA(g_xy_data.tt_stat)) {
+ /* terminate all active tracks */
+ cur_tch = CY_NTCH;
+ cyttsp_debug("Large obj detect (tt_stat=0x%02X). Terminate act trks\n", \
+ g_xy_data.tt_stat);
+ } else if (cur_tch > CY_NUM_MT_TCH_ID) {
+ /* if the number of fingers on the touch surface
+ * is more than the maximum then
+ * there will be no new track information
+ * even for the original touches.
+ * Therefore, terminate all active tracks.
+ */
+ cur_tch = CY_NTCH;
+ cyttsp_debug("Num touch err (tt_stat=0x%02X). Terminate act trks\n", \
+ g_xy_data.tt_stat);
+ }
+ }
+
+ /* set tool size */
+ curr_tool_width = CY_SMALL_TOOL_WIDTH;
+
+ /* translate Gen2 interface data into comparable Gen3 data */
+ if (ts->platform_data->gen == CY_GEN2) {
+ struct cyttsp_gen2_xydata_t *pxy_gen2_data;
+ pxy_gen2_data = (struct cyttsp_gen2_xydata_t *)(&g_xy_data);
+
+ /* use test data? */
+ cyttsp_testdat(&g_xy_data, &tt_gen2_testray, \
+ sizeof(struct cyttsp_gen3_xydata_t));
+
+ if (pxy_gen2_data->evnt_idx == CY_GEN2_NOTOUCH) {
+ cur_tch = 0;
+ } else if (cur_tch == CY_GEN2_GHOST) {
+ cur_tch = 0;
+ } else if (cur_tch == CY_GEN2_2TOUCH) {
+ /* stuff artificial track ID1 and ID2 */
+ g_xy_data.touch12_id = 0x12;
+ g_xy_data.z1 = CY_MAXZ;
+ g_xy_data.z2 = CY_MAXZ;
+ cur_tch--; /* 2 touches */
+ } else if (cur_tch == CY_GEN2_1TOUCH) {
+ /* stuff artificial track ID1 and ID2 */
+ g_xy_data.touch12_id = 0x12;
+ g_xy_data.z1 = CY_MAXZ;
+ g_xy_data.z2 = CY_NTCH;
+ if (pxy_gen2_data->evnt_idx == CY_GEN2_TOUCH2) {
+ /* push touch 2 data into touch1
+ * (first finger up; second finger down) */
+ /* stuff artificial track ID1 for touch2 info */
+ g_xy_data.touch12_id = 0x20;
+ /* stuff touch 1 with touch 2 coordinate data */
+ g_xy_data.x1 = g_xy_data.x2;
+ g_xy_data.y1 = g_xy_data.y2;
+ }
+ } else {
+ cur_tch = 0;
+ }
+ } else {
+ /* use test data? */
+ cyttsp_testdat(&g_xy_data, &tt_gen3_testray, \
+ sizeof(struct cyttsp_gen3_xydata_t));
+ }
+
+
+
+ /* clear current active track ID array and count previous touches */
+ for (id = 0, prv_tch = CY_NTCH;
+ id < CY_NUM_TRK_ID; id++) {
+ cur_trk[id] = CY_NTCH;
+ prv_tch += ts->act_trk[id];
+ }
+
+ /* send no events if no previous touches and no new touches */
+ if ((prv_tch == CY_NTCH) &&
+ ((cur_tch == CY_NTCH) ||
+ (cur_tch > CY_NUM_MT_TCH_ID))) {
+ goto exit_xy_worker;
+ }
+
+ cyttsp_debug("prev=%d curr=%d\n", prv_tch, cur_tch);
+
+ for (id = 0; id < CY_NUM_ST_TCH_ID; id++) {
+ /* clear current single touches array */
+ cur_st_tch[id] = CY_IGNR_TCH;
+ }
+
+ /* clear single touch positions */
+ st_x1 = CY_NTCH;
+ st_y1 = CY_NTCH;
+ st_z1 = CY_NTCH;
+ st_x2 = CY_NTCH;
+ st_y2 = CY_NTCH;
+ st_z2 = CY_NTCH;
+
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ /* clear current multi-touches array and
+ * multi-touch positions/z */
+ cur_mt_tch[id] = CY_IGNR_TCH;
+ }
+
+ if (ts->platform_data->use_trk_id) {
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ cur_mt_pos[id][CY_XPOS] = 0;
+ cur_mt_pos[id][CY_YPOS] = 0;
+ cur_mt_z[id] = 0;
+ }
+ } else {
+ for (id = 0; id < CY_NUM_TRK_ID; id++) {
+ cur_mt_pos[id][CY_XPOS] = 0;
+ cur_mt_pos[id][CY_YPOS] = 0;
+ cur_mt_z[id] = 0;
+ }
+ }
+
+ /* Determine if display is tilted */
+ if (FLIP_DATA(ts->platform_data->flags))
+ tilt = true;
+ else
+ tilt = false;
+
+ /* Check for switch in origin */
+ if (REVERSE_X(ts->platform_data->flags))
+ rev_x = true;
+ else
+ rev_x = false;
+
+ if (REVERSE_Y(ts->platform_data->flags))
+ rev_y = true;
+ else
+ rev_y = false;
+
+ if (cur_tch) {
+ struct cyttsp_gen2_xydata_t *pxy_gen2_data;
+ struct cyttsp_gen3_xydata_t *pxy_gen3_data;
+ switch (ts->platform_data->gen) {
+ case CY_GEN2: {
+ pxy_gen2_data =
+ (struct cyttsp_gen2_xydata_t *)(&g_xy_data);
+ cyttsp_xdebug("TTSP Gen2 report:\n");
+ cyttsp_xdebug("%02X %02X %02X\n", \
+ pxy_gen2_data->hst_mode, \
+ pxy_gen2_data->tt_mode, \
+ pxy_gen2_data->tt_stat);
+ cyttsp_xdebug("%04X %04X %02X %02X\n", \
+ pxy_gen2_data->x1, \
+ pxy_gen2_data->y1, \
+ pxy_gen2_data->z1, \
+ pxy_gen2_data->evnt_idx);
+ cyttsp_xdebug("%04X %04X %02X\n", \
+ pxy_gen2_data->x2, \
+ pxy_gen2_data->y2, \
+ pxy_gen2_data->tt_undef1);
+ cyttsp_xdebug("%02X %02X %02X\n", \
+ pxy_gen2_data->gest_cnt, \
+ pxy_gen2_data->gest_id, \
+ pxy_gen2_data->gest_set);
+ break;
+ }
+ case CY_GEN3:
+ default: {
+ pxy_gen3_data =
+ (struct cyttsp_gen3_xydata_t *)(&g_xy_data);
+ cyttsp_xdebug("TTSP Gen3 report:\n");
+ cyttsp_xdebug("%02X %02X %02X\n", \
+ pxy_gen3_data->hst_mode,
+ pxy_gen3_data->tt_mode,
+ pxy_gen3_data->tt_stat);
+ cyttsp_xdebug("%04X %04X %02X %02X", \
+ pxy_gen3_data->x1,
+ pxy_gen3_data->y1,
+ pxy_gen3_data->z1, \
+ pxy_gen3_data->touch12_id);
+ cyttsp_xdebug("%04X %04X %02X\n", \
+ pxy_gen3_data->x2, \
+ pxy_gen3_data->y2, \
+ pxy_gen3_data->z2);
+ cyttsp_xdebug("%02X %02X %02X\n", \
+ pxy_gen3_data->gest_cnt, \
+ pxy_gen3_data->gest_id, \
+ pxy_gen3_data->gest_set);
+ cyttsp_xdebug("%04X %04X %02X %02X\n", \
+ pxy_gen3_data->x3, \
+ pxy_gen3_data->y3, \
+ pxy_gen3_data->z3, \
+ pxy_gen3_data->touch34_id);
+ cyttsp_xdebug("%04X %04X %02X\n", \
+ pxy_gen3_data->x4, \
+ pxy_gen3_data->y4, \
+ pxy_gen3_data->z4);
+ break;
+ }
+ }
+ }
+
+ /* process the touches */
+ switch (cur_tch) {
+ case 4: {
+ g_xy_data.x4 = be16_to_cpu(g_xy_data.x4);
+ g_xy_data.y4 = be16_to_cpu(g_xy_data.y4);
+ if (tilt)
+ FLIP_XY(g_xy_data.x4, g_xy_data.y4);
+
+ if (rev_x) {
+ g_xy_data.x4 =
+ INVERT_X(g_xy_data.x4, ts->platform_data->maxx);
+ }
+ if (rev_y) {
+ g_xy_data.y4 =
+ INVERT_X(g_xy_data.y4, ts->platform_data->maxy);
+ }
+ id = GET_TOUCH4_ID(g_xy_data.touch34_id);
+ if (ts->platform_data->use_trk_id) {
+ cur_mt_pos[CY_MT_TCH4_IDX][CY_XPOS] =
+ g_xy_data.x4;
+ cur_mt_pos[CY_MT_TCH4_IDX][CY_YPOS] =
+ g_xy_data.y4;
+ cur_mt_z[CY_MT_TCH4_IDX] = g_xy_data.z4;
+ } else {
+ cur_mt_pos[id][CY_XPOS] = g_xy_data.x4;
+ cur_mt_pos[id][CY_YPOS] = g_xy_data.y4;
+ cur_mt_z[id] = g_xy_data.z4;
+ }
+ cur_mt_tch[CY_MT_TCH4_IDX] = id;
+ cur_trk[id] = CY_TCH;
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
+ CY_NUM_TRK_ID) {
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
+ st_x1 = g_xy_data.x4;
+ st_y1 = g_xy_data.y4;
+ st_z1 = g_xy_data.z4;
+ cur_st_tch[CY_ST_FNGR1_IDX] = id;
+ } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
+ st_x2 = g_xy_data.x4;
+ st_y2 = g_xy_data.y4;
+ st_z2 = g_xy_data.z4;
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ }
+ cyttsp_xdebug("4th XYZ:% 3d,% 3d,% 3d ID:% 2d\n\n", \
+ g_xy_data.x4, g_xy_data.y4, g_xy_data.z4, \
+ (g_xy_data.touch34_id & 0x0F));
+ /* do not break */
+ }
+ case 3: {
+ g_xy_data.x3 = be16_to_cpu(g_xy_data.x3);
+ g_xy_data.y3 = be16_to_cpu(g_xy_data.y3);
+ if (tilt)
+ FLIP_XY(g_xy_data.x3, g_xy_data.y3);
+
+ if (rev_x) {
+ g_xy_data.x3 =
+ INVERT_X(g_xy_data.x3, ts->platform_data->maxx);
+ }
+ if (rev_y) {
+ g_xy_data.y3 =
+ INVERT_X(g_xy_data.y3, ts->platform_data->maxy);
+ }
+ id = GET_TOUCH3_ID(g_xy_data.touch34_id);
+ if (ts->platform_data->use_trk_id) {
+ cur_mt_pos[CY_MT_TCH3_IDX][CY_XPOS] =
+ g_xy_data.x3;
+ cur_mt_pos[CY_MT_TCH3_IDX][CY_YPOS] =
+ g_xy_data.y3;
+ cur_mt_z[CY_MT_TCH3_IDX] = g_xy_data.z3;
+ } else {
+ cur_mt_pos[id][CY_XPOS] = g_xy_data.x3;
+ cur_mt_pos[id][CY_YPOS] = g_xy_data.y3;
+ cur_mt_z[id] = g_xy_data.z3;
+ }
+ cur_mt_tch[CY_MT_TCH3_IDX] = id;
+ cur_trk[id] = CY_TCH;
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
+ CY_NUM_TRK_ID) {
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
+ st_x1 = g_xy_data.x3;
+ st_y1 = g_xy_data.y3;
+ st_z1 = g_xy_data.z3;
+ cur_st_tch[CY_ST_FNGR1_IDX] = id;
+ } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
+ st_x2 = g_xy_data.x3;
+ st_y2 = g_xy_data.y3;
+ st_z2 = g_xy_data.z3;
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ }
+ cyttsp_xdebug("3rd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
+ g_xy_data.x3, g_xy_data.y3, g_xy_data.z3, \
+ ((g_xy_data.touch34_id >> 4) & 0x0F));
+ /* do not break */
+ }
+ case 2: {
+ g_xy_data.x2 = be16_to_cpu(g_xy_data.x2);
+ g_xy_data.y2 = be16_to_cpu(g_xy_data.y2);
+ if (tilt)
+ FLIP_XY(g_xy_data.x2, g_xy_data.y2);
+
+ if (rev_x) {
+ g_xy_data.x2 =
+ INVERT_X(g_xy_data.x2, ts->platform_data->maxx);
+ }
+ if (rev_y) {
+ g_xy_data.y2 =
+ INVERT_X(g_xy_data.y2, ts->platform_data->maxy);
+ }
+ id = GET_TOUCH2_ID(g_xy_data.touch12_id);
+ if (ts->platform_data->use_trk_id) {
+ cur_mt_pos[CY_MT_TCH2_IDX][CY_XPOS] =
+ g_xy_data.x2;
+ cur_mt_pos[CY_MT_TCH2_IDX][CY_YPOS] =
+ g_xy_data.y2;
+ cur_mt_z[CY_MT_TCH2_IDX] = g_xy_data.z2;
+ } else {
+ cur_mt_pos[id][CY_XPOS] = g_xy_data.x2;
+ cur_mt_pos[id][CY_YPOS] = g_xy_data.y2;
+ cur_mt_z[id] = g_xy_data.z2;
+ }
+ cur_mt_tch[CY_MT_TCH2_IDX] = id;
+ cur_trk[id] = CY_TCH;
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
+ CY_NUM_TRK_ID) {
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
+ st_x1 = g_xy_data.x2;
+ st_y1 = g_xy_data.y2;
+ st_z1 = g_xy_data.z2;
+ cur_st_tch[CY_ST_FNGR1_IDX] = id;
+ } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
+ st_x2 = g_xy_data.x2;
+ st_y2 = g_xy_data.y2;
+ st_z2 = g_xy_data.z2;
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ }
+ cyttsp_xdebug("2nd XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
+ g_xy_data.x2, g_xy_data.y2, g_xy_data.z2, \
+ (g_xy_data.touch12_id & 0x0F));
+ /* do not break */
+ }
+ case 1: {
+ g_xy_data.x1 = be16_to_cpu(g_xy_data.x1);
+ g_xy_data.y1 = be16_to_cpu(g_xy_data.y1);
+ if (tilt)
+ FLIP_XY(g_xy_data.x1, g_xy_data.y1);
+
+ if (rev_x) {
+ g_xy_data.x1 =
+ INVERT_X(g_xy_data.x1, ts->platform_data->maxx);
+ }
+ if (rev_y) {
+ g_xy_data.y1 =
+ INVERT_X(g_xy_data.y1, ts->platform_data->maxy);
+ }
+ id = GET_TOUCH1_ID(g_xy_data.touch12_id);
+ if (ts->platform_data->use_trk_id) {
+ cur_mt_pos[CY_MT_TCH1_IDX][CY_XPOS] =
+ g_xy_data.x1;
+ cur_mt_pos[CY_MT_TCH1_IDX][CY_YPOS] =
+ g_xy_data.y1;
+ cur_mt_z[CY_MT_TCH1_IDX] = g_xy_data.z1;
+ } else {
+ cur_mt_pos[id][CY_XPOS] = g_xy_data.x1;
+ cur_mt_pos[id][CY_YPOS] = g_xy_data.y1;
+ cur_mt_z[id] = g_xy_data.z1;
+ }
+ cur_mt_tch[CY_MT_TCH1_IDX] = id;
+ cur_trk[id] = CY_TCH;
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] <
+ CY_NUM_TRK_ID) {
+ if (ts->prv_st_tch[CY_ST_FNGR1_IDX] == id) {
+ st_x1 = g_xy_data.x1;
+ st_y1 = g_xy_data.y1;
+ st_z1 = g_xy_data.z1;
+ cur_st_tch[CY_ST_FNGR1_IDX] = id;
+ } else if (ts->prv_st_tch[CY_ST_FNGR2_IDX] == id) {
+ st_x2 = g_xy_data.x1;
+ st_y2 = g_xy_data.y1;
+ st_z2 = g_xy_data.z1;
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ }
+ cyttsp_xdebug("1st XYZ:% 3d,% 3d,% 3d ID:% 2d\n", \
+ g_xy_data.x1, g_xy_data.y1, g_xy_data.z1, \
+ ((g_xy_data.touch12_id >> 4) & 0x0F));
+ break;
+ }
+ case 0:
+ default:{
+ break;
+ }
+ }
+
+ /* handle Single Touch signals */
+ if (ts->platform_data->use_st) {
+ cyttsp_xdebug("ST STEP 0 - ST1 ID=%d ST2 ID=%d\n", \
+ cur_st_tch[CY_ST_FNGR1_IDX], \
+ cur_st_tch[CY_ST_FNGR2_IDX]);
+ if (cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) {
+ /* reassign finger 1 and 2 positions to new tracks */
+ if (cur_tch > 0) {
+ /* reassign st finger1 */
+ if (ts->platform_data->use_trk_id) {
+ id = CY_MT_TCH1_IDX;
+ cur_st_tch[CY_ST_FNGR1_IDX] = cur_mt_tch[id];
+ } else {
+ id = GET_TOUCH1_ID(g_xy_data.touch12_id);
+ cur_st_tch[CY_ST_FNGR1_IDX] = id;
+ }
+ st_x1 = cur_mt_pos[id][CY_XPOS];
+ st_y1 = cur_mt_pos[id][CY_YPOS];
+ st_z1 = cur_mt_z[id];
+ cyttsp_xdebug("ST STEP 1 - ST1 ID=%3d\n", \
+ cur_st_tch[CY_ST_FNGR1_IDX]);
+ if ((cur_tch > 1) &&
+ (cur_st_tch[CY_ST_FNGR2_IDX] >
+ CY_NUM_TRK_ID)) {
+ /* reassign st finger2 */
+ if (cur_tch > 1) {
+ if (ts->platform_data->use_trk_id) {
+ id = CY_MT_TCH2_IDX;
+ cur_st_tch[CY_ST_FNGR2_IDX] = cur_mt_tch[id];
+ } else {
+ id = GET_TOUCH2_ID(g_xy_data.touch12_id);
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ st_x2 = cur_mt_pos[id][CY_XPOS];
+ st_y2 = cur_mt_pos[id][CY_YPOS];
+ st_z2 = cur_mt_z[id];
+ cyttsp_xdebug("ST STEP 2 - ST2 ID=%3d\n", \
+ cur_st_tch[CY_ST_FNGR2_IDX]);
+ }
+ }
+ }
+ } else if (cur_st_tch[CY_ST_FNGR2_IDX] > CY_NUM_TRK_ID) {
+ if (cur_tch > 1) {
+ /* reassign st finger2 */
+ if (ts->platform_data->use_trk_id) {
+ /* reassign st finger2 */
+ id = CY_MT_TCH2_IDX;
+ cur_st_tch[CY_ST_FNGR2_IDX] =
+ cur_mt_tch[id];
+ } else {
+ /* reassign st finger2 */
+ id = GET_TOUCH2_ID(g_xy_data.touch12_id);
+ cur_st_tch[CY_ST_FNGR2_IDX] = id;
+ }
+ st_x2 = cur_mt_pos[id][CY_XPOS];
+ st_y2 = cur_mt_pos[id][CY_YPOS];
+ st_z2 = cur_mt_z[id];
+ cyttsp_xdebug("ST STEP 3 - ST2 ID=%3d\n", \
+ cur_st_tch[CY_ST_FNGR2_IDX]);
+ }
+ }
+ /* if the 1st touch is missing and there is a 2nd touch,
+ * then set the 1st touch to 2nd touch and terminate 2nd touch
+ */
+ if ((cur_st_tch[CY_ST_FNGR1_IDX] > CY_NUM_TRK_ID) &&
+ (cur_st_tch[CY_ST_FNGR2_IDX] < CY_NUM_TRK_ID)) {
+ st_x1 = st_x2;
+ st_y1 = st_y2;
+ st_z1 = st_z2;
+ cur_st_tch[CY_ST_FNGR1_IDX] =
+ cur_st_tch[CY_ST_FNGR2_IDX];
+ cur_st_tch[CY_ST_FNGR2_IDX] =
+ CY_IGNR_TCH;
+ }
+ /* if the 2nd touch ends up equal to the 1st touch,
+ * then just report a single touch */
+ if (cur_st_tch[CY_ST_FNGR1_IDX] ==
+ cur_st_tch[CY_ST_FNGR2_IDX]) {
+ cur_st_tch[CY_ST_FNGR2_IDX] =
+ CY_IGNR_TCH;
+ }
+ /* set Single Touch current event signals */
+ if (cur_st_tch[CY_ST_FNGR1_IDX] < CY_NUM_TRK_ID) {
+ input_report_abs(ts->input,
+ ABS_X, st_x1);
+ input_report_abs(ts->input,
+ ABS_Y, st_y1);
+ input_report_abs(ts->input,
+ ABS_PRESSURE, st_z1);
+ input_report_key(ts->input,
+ BTN_TOUCH,
+ CY_TCH);
+ input_report_abs(ts->input,
+ ABS_TOOL_WIDTH,
+ curr_tool_width);
+ cyttsp_debug("ST->F1:%3d X:%3d Y:%3d Z:%3d\n", \
+ cur_st_tch[CY_ST_FNGR1_IDX], \
+ st_x1, st_y1, st_z1);
+ if (cur_st_tch[CY_ST_FNGR2_IDX] < CY_NUM_TRK_ID) {
+ input_report_key(ts->input, BTN_2, CY_TCH);
+ input_report_abs(ts->input, ABS_HAT0X, st_x2);
+ input_report_abs(ts->input, ABS_HAT0Y, st_y2);
+ cyttsp_debug("ST->F2:%3d X:%3d Y:%3d Z:%3d\n", \
+ cur_st_tch[CY_ST_FNGR2_IDX],
+ st_x2, st_y2, st_z2);
+ } else {
+ input_report_key(ts->input,
+ BTN_2,
+ CY_NTCH);
+ }
+ } else {
+ input_report_abs(ts->input, ABS_PRESSURE, CY_NTCH);
+ input_report_key(ts->input, BTN_TOUCH, CY_NTCH);
+ input_report_key(ts->input, BTN_2, CY_NTCH);
+ }
+ /* update platform data for the current single touch info */
+ ts->prv_st_tch[CY_ST_FNGR1_IDX] = cur_st_tch[CY_ST_FNGR1_IDX];
+ ts->prv_st_tch[CY_ST_FNGR2_IDX] = cur_st_tch[CY_ST_FNGR2_IDX];
+
+ }
+
+ /* handle Multi-touch signals */
+ if (ts->platform_data->use_mt) {
+ if (ts->platform_data->use_trk_id) {
+ /* terminate any previous touch where the track
+ * is missing from the current event */
+ for (id = 0; id < CY_NUM_TRK_ID; id++) {
+ if ((ts->act_trk[id] != CY_NTCH) &&
+ (cur_trk[id] == CY_NTCH)) {
+ input_report_abs(ts->input,
+ ABS_MT_TRACKING_ID,
+ id);
+ input_report_abs(ts->input,
+ ABS_MT_TOUCH_MAJOR,
+ CY_NTCH);
+ input_report_abs(ts->input,
+ ABS_MT_WIDTH_MAJOR,
+ curr_tool_width);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_X,
+ ts->prv_mt_pos[id][CY_XPOS]);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_Y,
+ ts->prv_mt_pos[id][CY_YPOS]);
+ CY_MT_SYNC(ts->input);
+ ts->act_trk[id] = CY_NTCH;
+ ts->prv_mt_pos[id][CY_XPOS] = 0;
+ ts->prv_mt_pos[id][CY_YPOS] = 0;
+ }
+ }
+ /* set Multi-Touch current event signals */
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ if (cur_mt_tch[id] < CY_NUM_TRK_ID) {
+ input_report_abs(ts->input,
+ ABS_MT_TRACKING_ID,
+ cur_mt_tch[id]);
+ input_report_abs(ts->input,
+ ABS_MT_TOUCH_MAJOR,
+ cur_mt_z[id]);
+ input_report_abs(ts->input,
+ ABS_MT_WIDTH_MAJOR,
+ curr_tool_width);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_X,
+ cur_mt_pos[id][CY_XPOS]);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_Y,
+ cur_mt_pos[id][CY_YPOS]);
+ CY_MT_SYNC(ts->input);
+ ts->act_trk[id] = CY_TCH;
+ ts->prv_mt_pos[id][CY_XPOS] =
+ cur_mt_pos[id][CY_XPOS];
+ ts->prv_mt_pos[id][CY_YPOS] =
+ cur_mt_pos[id][CY_YPOS];
+ }
+ }
+ } else {
+ /* set temporary track array elements to voids */
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ tmp_trk[id] = CY_IGNR_TCH;
+ snd_trk[id] = CY_IGNR_TCH;
+ }
+
+ /* get what is currently active */
+ for (i = 0, id = 0;
+ id < CY_NUM_TRK_ID && i < CY_NUM_MT_TCH_ID;
+ id++) {
+ if (cur_trk[id] == CY_TCH) {
+ /* only incr counter if track found */
+ tmp_trk[i] = id;
+ i++;
+ }
+ }
+ cyttsp_xdebug("T1: t0=%d, t1=%d, t2=%d, t3=%d\n", \
+ tmp_trk[0], tmp_trk[1], tmp_trk[2], \
+ tmp_trk[3]);
+ cyttsp_xdebug("T1: p0=%d, p1=%d, p2=%d, p3=%d\n", \
+ ts->prv_mt_tch[0], ts->prv_mt_tch[1], \
+ ts->prv_mt_tch[2], ts->prv_mt_tch[3]);
+
+ /* pack in still active previous touches */
+ for (id = 0, prv_tch = 0;
+ id < CY_NUM_MT_TCH_ID; id++) {
+ if (tmp_trk[id] < CY_NUM_TRK_ID) {
+ if (cyttsp_inlist(ts->prv_mt_tch,
+ tmp_trk[id], &loc,
+ CY_NUM_MT_TCH_ID)) {
+ loc &= CY_NUM_MT_TCH_ID - 1;
+ snd_trk[loc] = tmp_trk[id];
+ prv_tch++;
+ cyttsp_xdebug("inlist s[%d]=%d t[%d]=%d l=%d p=%d\n", \
+ loc, snd_trk[loc], \
+ id, tmp_trk[id], \
+ loc, prv_tch);
+ } else {
+ cyttsp_xdebug("not inlist s[%d]=%d t[%d]=%d l=%d \n", \
+ id, snd_trk[id], \
+ id, tmp_trk[id], \
+ loc);
+ }
+ }
+ }
+ cyttsp_xdebug("S1: s0=%d, s1=%d, s2=%d, s3=%d p=%d\n", \
+ snd_trk[0], snd_trk[1], snd_trk[2], \
+ snd_trk[3], prv_tch);
+
+ /* pack in new touches */
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ if (tmp_trk[id] < CY_NUM_TRK_ID) {
+ if (!cyttsp_inlist(snd_trk, tmp_trk[id], &loc, CY_NUM_MT_TCH_ID)) {
+ cyttsp_xdebug("not inlist t[%d]=%d l=%d\n", \
+ id, tmp_trk[id], loc);
+ if (cyttsp_next_avail_inlist(snd_trk, &loc, CY_NUM_MT_TCH_ID)) {
+ loc &= CY_NUM_MT_TCH_ID - 1;
+ snd_trk[loc] = tmp_trk[id];
+ cyttsp_xdebug("put inlist s[%d]=%d t[%d]=%d\n",
+ loc, snd_trk[loc], id, tmp_trk[id]);
+ }
+ } else {
+ cyttsp_xdebug("is in list s[%d]=%d t[%d]=%d loc=%d\n", \
+ id, snd_trk[id], id, tmp_trk[id], loc);
+ }
+ }
+ }
+ cyttsp_xdebug("S2: s0=%d, s1=%d, s2=%d, s3=%d\n", \
+ snd_trk[0], snd_trk[1],
+ snd_trk[2], snd_trk[3]);
+
+ /* sync motion event signals for each current touch */
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ /* z will either be 0 (NOTOUCH) or
+ * some pressure (TOUCH) */
+ cyttsp_xdebug("MT0 prev[%d]=%d temp[%d]=%d send[%d]=%d\n", \
+ id, ts->prv_mt_tch[id], \
+ id, tmp_trk[id], \
+ id, snd_trk[id]);
+ if (snd_trk[id] < CY_NUM_TRK_ID) {
+ input_report_abs(ts->input,
+ ABS_MT_TOUCH_MAJOR,
+ cur_mt_z[snd_trk[id]]);
+ input_report_abs(ts->input,
+ ABS_MT_WIDTH_MAJOR,
+ curr_tool_width);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_X,
+ cur_mt_pos[snd_trk[id]][CY_XPOS]);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_Y,
+ cur_mt_pos[snd_trk[id]][CY_YPOS]);
+ CY_MT_SYNC(ts->input);
+ cyttsp_debug("MT1->TID:%2d X:%3d Y:%3d Z:%3d touch-sent\n", \
+ snd_trk[id], \
+ cur_mt_pos[snd_trk[id]][CY_XPOS], \
+ cur_mt_pos[snd_trk[id]][CY_YPOS], \
+ cur_mt_z[snd_trk[id]]);
+ } else if (ts->prv_mt_tch[id] < CY_NUM_TRK_ID) {
+ /* void out this touch */
+ input_report_abs(ts->input,
+ ABS_MT_TOUCH_MAJOR,
+ CY_NTCH);
+ input_report_abs(ts->input,
+ ABS_MT_WIDTH_MAJOR,
+ curr_tool_width);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_X,
+ ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_XPOS]);
+ input_report_abs(ts->input,
+ ABS_MT_POSITION_Y,
+ ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_YPOS]);
+ CY_MT_SYNC(ts->input);
+ cyttsp_debug("MT2->TID:%2d X:%3d Y:%3d Z:%3d lift off-sent\n", \
+ ts->prv_mt_tch[id], \
+ ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_XPOS], \
+ ts->prv_mt_pos[ts->prv_mt_tch[id]][CY_YPOS], \
+ CY_NTCH);
+ } else {
+ /* do not stuff any signals for this
+ * previously and currently
+ * void touches */
+ cyttsp_xdebug("MT3->send[%d]=%d - No touch - NOT sent\n", \
+ id, snd_trk[id]);
+ }
+ }
+
+ /* save current posted tracks to
+ * previous track memory */
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ ts->prv_mt_tch[id] = snd_trk[id];
+ ts->prv_mt_pos[snd_trk[id]][CY_XPOS] =
+ cur_mt_pos[snd_trk[id]][CY_XPOS];
+ ts->prv_mt_pos[snd_trk[id]][CY_YPOS] =
+ cur_mt_pos[snd_trk[id]][CY_YPOS];
+ cyttsp_xdebug("MT4->TID:%2d X:%3d Y:%3d Z:%3d save for previous\n", \
+ snd_trk[id], \
+ ts->prv_mt_pos[snd_trk[id]][CY_XPOS], \
+ ts->prv_mt_pos[snd_trk[id]][CY_YPOS], \
+ CY_NTCH);
+ }
+ for (id = 0; id < CY_NUM_TRK_ID; id++)
+ ts->act_trk[id] = CY_NTCH;
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++) {
+ if (snd_trk[id] < CY_NUM_TRK_ID)
+ ts->act_trk[snd_trk[id]] = CY_TCH;
+ }
+ }
+ }
+
+ /* handle gestures */
+ if (ts->platform_data->use_gestures) {
+ if (g_xy_data.gest_id) {
+ input_report_key(ts->input,
+ BTN_3, CY_TCH);
+ input_report_abs(ts->input,
+ ABS_HAT1X, g_xy_data.gest_id);
+ input_report_abs(ts->input,
+ ABS_HAT2Y, g_xy_data.gest_cnt);
+ }
+ }
+
+ /* signal the view motion event */
+ input_sync(ts->input);
+
+ for (id = 0; id < CY_NUM_TRK_ID; id++) {
+ /* update platform data for the current MT information */
+ ts->act_trk[id] = cur_trk[id];
+ }
+
+exit_xy_worker:
+ if (cyttsp_disable_touch) {
+ /* Turn off the touch interrupts */
+ cyttsp_debug("Not enabling touch\n");
+ } else {
+ if (ts->client->irq == 0) {
+ /* restart event timer */
+ mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
+ } else {
+ /* re-enable the interrupt after processing */
+ enable_irq(ts->client->irq);
+ }
+ }
+ return;
+}
+
+static int cyttsp_inlist(u16 prev_track[], u8 cur_trk_id,
+ u8 *prev_loc, u8 num_touches)
+{
+ u8 id = 0;
+
+ *prev_loc = CY_IGNR_TCH;
+
+ cyttsp_xdebug("IN p[%d]=%d c=%d n=%d loc=%d\n", \
+ id, prev_track[id], cur_trk_id, \
+ num_touches, *prev_loc);
+ for (id = 0, *prev_loc = CY_IGNR_TCH;
+ (id < num_touches); id++) {
+ cyttsp_xdebug("p[%d]=%d c=%d n=%d loc=%d\n", \
+ id, prev_track[id], cur_trk_id, \
+ num_touches, *prev_loc);
+ if (prev_track[id] == cur_trk_id) {
+ *prev_loc = id;
+ break;
+ }
+ }
+ cyttsp_xdebug("OUT p[%d]=%d c=%d n=%d loc=%d\n", \
+ id, prev_track[id], cur_trk_id, num_touches, *prev_loc);
+
+ return ((*prev_loc < CY_NUM_TRK_ID) ? true : false);
+}
+
+static int cyttsp_next_avail_inlist(u16 cur_trk[],
+ u8 *new_loc, u8 num_touches)
+{
+ u8 id;
+
+ for (id = 0, *new_loc = CY_IGNR_TCH;
+ (id < num_touches); id++) {
+ if (cur_trk[id] > CY_NUM_TRK_ID) {
+ *new_loc = id;
+ break;
+ }
+ }
+
+ return ((*new_loc < CY_NUM_TRK_ID) ? true : false);
+}
+
+/* Timer function used as dummy interrupt driver */
+static void cyttsp_timer(unsigned long handle)
+{
+ struct cyttsp *ts = (struct cyttsp *) handle;
+
+ cyttsp_xdebug("TTSP Device timer event\n");
+
+ /* schedule motion signal handling */
+ queue_work(cyttsp_ts_wq, &ts->work);
+
+ return;
+}
+
+
+
+/* ************************************************************************
+ * ISR function. This function is general, initialized in drivers init
+ * function
+ * ************************************************************************ */
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+ struct cyttsp *ts = (struct cyttsp *) handle;
+
+ cyttsp_xdebug("%s: Got IRQ\n", CY_I2C_NAME);
+
+ /* disable further interrupts until this interrupt is processed */
+ disable_irq_nosync(ts->client->irq);
+
+ /* schedule motion signal handling */
+ queue_work(cyttsp_ts_wq, &ts->work);
+ return IRQ_HANDLED;
+}
+
+/* ************************************************************************
+ * Probe initialization functions
+ * ************************************************************************ */
+static int cyttsp_putbl(struct cyttsp *ts, int show,
+ int show_status, int show_version, int show_cid)
+{
+ int retval = CY_OK;
+
+ int num_bytes = (show_status * 3) + (show_version * 6) + (show_cid * 3);
+
+ if (show_cid)
+ num_bytes = sizeof(struct cyttsp_bootloader_data_t);
+ else if (show_version)
+ num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 3;
+ else
+ num_bytes = sizeof(struct cyttsp_bootloader_data_t) - 9;
+
+ if (show) {
+ retval = i2c_smbus_read_i2c_block_data(ts->client,
+ CY_REG_BASE, num_bytes, (u8 *)&g_bl_data);
+ if (show_status) {
+ cyttsp_debug("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X\n", \
+ show, \
+ g_bl_data.bl_file, \
+ g_bl_data.bl_status, \
+ g_bl_data.bl_error, \
+ g_bl_data.blver_hi, g_bl_data.blver_lo, \
+ g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo);
+ }
+ if (show_version) {
+ cyttsp_debug("BL%d: ttspver=0x%02X%02X appid=0x%02X%02X appver=0x%02X%02X\n", \
+ show, \
+ g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
+ g_bl_data.appid_hi, g_bl_data.appid_lo, \
+ g_bl_data.appver_hi, g_bl_data.appver_lo);
+ }
+ if (show_cid) {
+ cyttsp_debug("BL%d: cid=0x%02X%02X%02X\n", \
+ show, \
+ g_bl_data.cid_0, \
+ g_bl_data.cid_1, \
+ g_bl_data.cid_2);
+ }
+ mdelay(CY_DLY_DFLT);
+ }
+
+ return retval;
+}
+
+#ifdef CY_INCLUDE_LOAD_FILE
+#define CY_MAX_I2C_LEN 256
+#define CY_MAX_TRY 10
+#define CY_BL_PAGE_SIZE 16
+#define CY_BL_NUM_PAGES 5
+static int cyttsp_i2c_wr_blk_data(struct i2c_client *client, u8 command,
+ u8 length, const u8 *values)
+{
+ int retval = CY_OK;
+
+ u8 dataray[CY_MAX_I2C_LEN];
+ u8 try;
+ dataray[0] = command;
+ if (length)
+ memcpy(&dataray[1], values, length);
+
+ try = CY_MAX_TRY;
+ do {
+ retval = i2c_master_send(client, dataray, length+1);
+ mdelay(CY_DLY_DFLT*2);
+ } while ((retval != length+1) && try--);
+
+ return retval;
+}
+
+static int cyttsp_i2c_wr_blk_chunks(struct cyttsp *ts, u8 command,
+ u8 length, const u8 *values)
+{
+ int retval = CY_OK;
+ int block = 1;
+
+ u8 dataray[CY_MAX_I2C_LEN];
+
+ /* first page already includes the bl page offset */
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ CY_BL_PAGE_SIZE+1, values);
+ mdelay(10);
+ values += CY_BL_PAGE_SIZE+1;
+ length -= CY_BL_PAGE_SIZE+1;
+
+ /* rem blocks require bl page offset stuffing */
+ while (length &&
+ (block < CY_BL_NUM_PAGES) &&
+ !(retval < CY_OK)) {
+ dataray[0] = CY_BL_PAGE_SIZE*block;
+ memcpy(&dataray[1], values,
+ length >= CY_BL_PAGE_SIZE ?
+ CY_BL_PAGE_SIZE : length);
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ length >= CY_BL_PAGE_SIZE ?
+ CY_BL_PAGE_SIZE + 1 : length+1, dataray);
+ mdelay(10);
+ values += CY_BL_PAGE_SIZE;
+ length = length >= CY_BL_PAGE_SIZE ?
+ length - CY_BL_PAGE_SIZE : 0;
+ block++;
+ }
+
+ return retval;
+}
+
+static int cyttsp_bootload_app(struct cyttsp *ts)
+{
+ int retval = CY_OK;
+ int i, tries;
+ u8 host_reg;
+
+ cyttsp_debug("load new firmware \n");
+ /* reset TTSP Device back to bootloader mode */
+ host_reg = CY_SOFT_RESET_MODE;
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete reset back to bootloader */
+ mdelay(1000);
+ cyttsp_putbl(ts, 3, true, true, true);
+ cyttsp_debug("load file - tver=0x%02X%02X a_id=0x%02X%02X aver=0x%02X%02X\n", \
+ cyttsp_fw_tts_verh, cyttsp_fw_tts_verl, \
+ cyttsp_fw_app_idh, cyttsp_fw_app_idl, \
+ cyttsp_fw_app_verh, cyttsp_fw_app_verl);
+
+ /* download new TTSP Application to the Bootloader */
+ if (!(retval < CY_OK)) {
+ i = 0;
+ /* send bootload initiation command */
+ if (cyttsp_fw[i].Command == CY_BL_INIT_LOAD) {
+ g_bl_data.bl_file = 0;
+ g_bl_data.bl_status = 0;
+ g_bl_data.bl_error = 0;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ cyttsp_fw[i].Length, cyttsp_fw[i].Block);
+ /* delay to allow bl to get ready for block writes */
+ i++;
+ tries = 0;
+ cyttsp_debug("wait init f=%02X, s=%02X, e=%02X t=%d\n", \
+ g_bl_data.bl_file, g_bl_data.bl_status, \
+ g_bl_data.bl_error, tries);
+ do {
+ mdelay(1000);
+ cyttsp_putbl(ts, 4, true, false, false);
+ } while (g_bl_data.bl_status != 0x10 &&
+ g_bl_data.bl_status != 0x11 &&
+ tries++ < 10);
+ /* send bootload firmware load blocks */
+ if (!(retval < CY_OK)) {
+ while (cyttsp_fw[i].Command == CY_BL_WRITE_BLK) {
+ retval = cyttsp_i2c_wr_blk_chunks(ts,
+ CY_REG_BASE,
+ cyttsp_fw[i].Length,
+ cyttsp_fw[i].Block);
+ /* bl requires dly after blocks */
+ mdelay(100);
+ cyttsp_debug("BL DNLD Rec=% 3d Len=% 3d Addr=%04X\n", \
+ cyttsp_fw[i].Record, \
+ cyttsp_fw[i].Length, \
+ cyttsp_fw[i].Address);
+ i++;
+ if (retval < CY_OK) {
+ cyttsp_debug("BL fail Rec=%3d retval=%d\n", \
+ cyttsp_fw[i-1].Record, \
+ retval);
+ break;
+ } else {
+ /* reset TTSP I2C counter */
+ retval = cyttsp_i2c_wr_blk_data(ts->client,
+ CY_REG_BASE,
+ 0, NULL);
+ mdelay(10);
+ cyttsp_putbl(ts, 5,
+ true, false, false);
+ }
+ }
+ if (!(retval < CY_OK)) {
+ while (i < cyttsp_fw_records) {
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ cyttsp_fw[i].Length,
+ cyttsp_fw[i].Block);
+ i++;
+ tries = 0;
+ cyttsp_debug("wait init f=%02X, s=%02X, e=%02X t=%d\n", \
+ g_bl_data.bl_file, \
+ g_bl_data.bl_status, \
+ g_bl_data.bl_error, \
+ tries);
+ do {
+ mdelay(1000);
+ cyttsp_putbl(ts, 6, true, false, false);
+ } while (g_bl_data.bl_status != 0x10 &&
+ g_bl_data.bl_status != 0x11 &&
+ tries++ < 10);
+ cyttsp_putbl(ts, 7, true, false,
+ false);
+ if (retval < CY_OK)
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ /* reset TTSP Device back to bootloader mode */
+ host_reg = CY_SOFT_RESET_MODE;
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete reset back to bootloader */
+ mdelay(1000);
+
+ /* set arg2 to non-0 to activate */
+ retval = cyttsp_putbl(ts, 8, true, true, true);
+
+ return retval;
+}
+#else
+static int cyttsp_bootload_app(struct cyttsp *ts)
+{
+ cyttsp_debug("no-load new firmware \n");
+ return CY_OK;
+}
+#endif /* CY_INCLUDE_LOAD_FILE */
+
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+ int retval = CY_OK;
+ u8 host_reg;
+ int tries;
+
+ cyttsp_debug("Power up \n");
+
+ /* check if the TTSP device has a bootloader installed */
+ host_reg = CY_SOFT_RESET_MODE;
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ tries = 0;
+ do {
+ mdelay(1000);
+
+ /* set arg2 to non-0 to activate */
+ retval = cyttsp_putbl(ts, 1, true, true, true);
+ cyttsp_info("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X R=%d\n", \
+ 101, \
+ g_bl_data.bl_file, g_bl_data.bl_status, \
+ g_bl_data.bl_error, \
+ g_bl_data.blver_hi, g_bl_data.blver_lo, \
+ g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo,
+ retval);
+ cyttsp_info("BL%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n", \
+ 102, \
+ g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
+ g_bl_data.appid_hi, g_bl_data.appid_lo, \
+ g_bl_data.appver_hi, g_bl_data.appver_lo);
+ cyttsp_info("BL%d: c_id=%02X%02X%02X\n", \
+ 103, \
+ g_bl_data.cid_0, g_bl_data.cid_1, g_bl_data.cid_2);
+ } while (!(retval < CY_OK) &&
+ !GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
+ !(g_bl_data.bl_file == CY_OP_MODE + CY_LOW_PWR_MODE) &&
+ tries++ < 10);
+
+ /* is bootloader missing? */
+ if (!(retval < CY_OK)) {
+ cyttsp_xdebug("Ret=%d Check if bootloader is missing...\n", \
+ retval);
+ if (!GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
+ /* skip all bl and sys info and go to op mode */
+ if (!(retval < CY_OK)) {
+ cyttsp_xdebug("Bl is missing (ret=%d)\n", \
+ retval);
+ host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
+ retval = i2c_smbus_write_i2c_block_data(ts->client, CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete switch to
+ * Operational mode */
+ mdelay(1000);
+ goto bypass;
+ }
+ }
+ }
+
+
+ /* take TTSP out of bootloader mode; go to TrueTouch operational mode */
+ if (!(retval < CY_OK)) {
+ cyttsp_xdebug1("exit bootloader; go operational\n");
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE, sizeof(bl_cmd), bl_cmd);
+ tries = 0;
+ do {
+ mdelay(1000);
+ cyttsp_putbl(ts, 4, true, false, false);
+ cyttsp_info("BL%d: f=%02X s=%02X err=%02X bl=%02X%02X bld=%02X%02X\n", \
+ 104, \
+ g_bl_data.bl_file, g_bl_data.bl_status, \
+ g_bl_data.bl_error, \
+ g_bl_data.blver_hi, g_bl_data.blver_lo, \
+ g_bl_data.bld_blver_hi, g_bl_data.bld_blver_lo);
+ } while (GET_BOOTLOADERMODE(g_bl_data.bl_status) &&
+ tries++ < 10);
+ }
+
+
+
+ if (!(retval < CY_OK) &&
+ cyttsp_app_load()) {
+ mdelay(1000);
+ if (CY_DIFF(g_bl_data.ttspver_hi, cyttsp_tts_verh()) ||
+ CY_DIFF(g_bl_data.ttspver_lo, cyttsp_tts_verl()) ||
+ CY_DIFF(g_bl_data.appid_hi, cyttsp_app_idh()) ||
+ CY_DIFF(g_bl_data.appid_lo, cyttsp_app_idl()) ||
+ CY_DIFF(g_bl_data.appver_hi, cyttsp_app_verh()) ||
+ CY_DIFF(g_bl_data.appver_lo, cyttsp_app_verl()) ||
+ CY_DIFF(g_bl_data.cid_0, cyttsp_cid_0()) ||
+ CY_DIFF(g_bl_data.cid_1, cyttsp_cid_1()) ||
+ CY_DIFF(g_bl_data.cid_2, cyttsp_cid_2()) ||
+ cyttsp_force_fw_load()) {
+ cyttsp_debug("blttsp=0x%02X%02X flttsp=0x%02X%02X force=%d\n", \
+ g_bl_data.ttspver_hi, g_bl_data.ttspver_lo, \
+ cyttsp_tts_verh(), cyttsp_tts_verl(), \
+ cyttsp_force_fw_load());
+ cyttsp_debug("blappid=0x%02X%02X flappid=0x%02X%02X\n", \
+ g_bl_data.appid_hi, g_bl_data.appid_lo, \
+ cyttsp_app_idh(), cyttsp_app_idl());
+ cyttsp_debug("blappver=0x%02X%02X flappver=0x%02X%02X\n", \
+ g_bl_data.appver_hi, g_bl_data.appver_lo, \
+ cyttsp_app_verh(), cyttsp_app_verl());
+ cyttsp_debug("blcid=0x%02X%02X%02X flcid=0x%02X%02X%02X\n", \
+ g_bl_data.cid_0, \
+ g_bl_data.cid_1, \
+ g_bl_data.cid_2, \
+ cyttsp_cid_0(), \
+ cyttsp_cid_1(), \
+ cyttsp_cid_2());
+ /* enter bootloader to load new app into TTSP Device */
+ retval = cyttsp_bootload_app(ts);
+ /* take TTSP device out of bootloader mode;
+ * switch back to TrueTouch operational mode */
+ if (!(retval < CY_OK)) {
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(bl_cmd), bl_cmd);
+ /* wait for TTSP Device to complete
+ * switch to Operational mode */
+ mdelay(1000);
+ }
+ }
+ }
+
+bypass:
+ /* switch to System Information mode to read versions
+ * and set interval registers */
+ if (!(retval < CY_OK)) {
+ cyttsp_debug("switch to sysinfo mode \n");
+ host_reg = CY_SYSINFO_MODE;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE, sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete switch to SysInfo mode */
+ mdelay(1000);
+ if (!(retval < CY_OK)) {
+ retval = i2c_smbus_read_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(struct cyttsp_sysinfo_data_t),
+ (u8 *)&g_sysinfo_data);
+ cyttsp_debug("SI2: hst_mode=0x%02X mfg_cmd=0x%02X mfg_stat=0x%02X\n", \
+ g_sysinfo_data.hst_mode, \
+ g_sysinfo_data.mfg_cmd, \
+ g_sysinfo_data.mfg_stat);
+ cyttsp_debug("SI2: bl_ver=0x%02X%02X\n", \
+ g_sysinfo_data.bl_verh, \
+ g_sysinfo_data.bl_verl);
+ cyttsp_debug("SI2: sysinfo act_int=0x%02X tch_tmout=0x%02X lp_int=0x%02X\n", \
+ g_sysinfo_data.act_intrvl, \
+ g_sysinfo_data.tch_tmout, \
+ g_sysinfo_data.lp_intrvl);
+ cyttsp_info("SI%d: tver=%02X%02X a_id=%02X%02X aver=%02X%02X\n", \
+ 102, \
+ g_sysinfo_data.tts_verh, \
+ g_sysinfo_data.tts_verl, \
+ g_sysinfo_data.app_idh, \
+ g_sysinfo_data.app_idl, \
+ g_sysinfo_data.app_verh, \
+ g_sysinfo_data.app_verl);
+ cyttsp_info("SI%d: c_id=%02X%02X%02X\n", \
+ 103, \
+ g_sysinfo_data.cid[0], \
+ g_sysinfo_data.cid[1], \
+ g_sysinfo_data.cid[2]);
+ if (!(retval < CY_OK) &&
+ (CY_DIFF(ts->platform_data->act_intrvl,
+ CY_ACT_INTRVL_DFLT) ||
+ CY_DIFF(ts->platform_data->tch_tmout,
+ CY_TCH_TMOUT_DFLT) ||
+ CY_DIFF(ts->platform_data->lp_intrvl,
+ CY_LP_INTRVL_DFLT))) {
+ if (!(retval < CY_OK)) {
+ u8 intrvl_ray[sizeof(ts->platform_data->act_intrvl) +
+ sizeof(ts->platform_data->tch_tmout) +
+ sizeof(ts->platform_data->lp_intrvl)];
+ u8 i = 0;
+
+ intrvl_ray[i++] =
+ ts->platform_data->act_intrvl;
+ intrvl_ray[i++] =
+ ts->platform_data->tch_tmout;
+ intrvl_ray[i++] =
+ ts->platform_data->lp_intrvl;
+
+ cyttsp_debug("SI2: platinfo act_intrvl=0x%02X tch_tmout=0x%02X lp_intrvl=0x%02X\n", \
+ ts->platform_data->act_intrvl, \
+ ts->platform_data->tch_tmout, \
+ ts->platform_data->lp_intrvl);
+ /* set intrvl registers */
+ retval = i2c_smbus_write_i2c_block_data(
+ ts->client,
+ CY_REG_ACT_INTRVL,
+ sizeof(intrvl_ray), intrvl_ray);
+ mdelay(CY_DLY_SYSINFO);
+ }
+ }
+ }
+ /* switch back to Operational mode */
+ cyttsp_debug("switch back to operational mode \n");
+ if (!(retval < CY_OK)) {
+ host_reg = CY_OP_MODE/* + CY_LOW_PWR_MODE*/;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(host_reg), &host_reg);
+ /* wait for TTSP Device to complete
+ * switch to Operational mode */
+ mdelay(1000);
+ }
+ }
+ /* init gesture setup;
+ * this is required even if not using gestures
+ * in order to set the active distance */
+ if (!(retval < CY_OK)) {
+ u8 gesture_setup;
+ cyttsp_debug("init gesture setup \n");
+ gesture_setup = ts->platform_data->gest_set;
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_GEST_SET,
+ sizeof(gesture_setup), &gesture_setup);
+ mdelay(CY_DLY_DFLT);
+ }
+
+ if (!(retval < CY_OK))
+ ts->platform_data->power_state = CY_ACTIVE_STATE;
+ else
+ ts->platform_data->power_state = CY_IDLE_STATE;
+
+ cyttsp_debug("Retval=%d Power state is %s\n", \
+ retval, \
+ ts->platform_data->power_state == CY_ACTIVE_STATE ? \
+ "ACTIVE" : "IDLE");
+
+ return retval;
+}
+
+/* cyttsp_initialize: Driver Initialization. This function takes
+ * care of the following tasks:
+ * 1. Create and register an input device with input layer
+ * 2. Take CYTTSP device out of bootloader mode; go operational
+ * 3. Start any timers/Work queues. */
+static int cyttsp_initialize(struct i2c_client *client, struct cyttsp *ts)
+{
+ struct input_dev *input_device;
+ int error = 0;
+ int retval = CY_OK;
+ u8 id;
+
+ /* Create the input device and register it. */
+ input_device = input_allocate_device();
+ if (!input_device) {
+ error = -ENOMEM;
+ cyttsp_xdebug1("err input allocate device\n");
+ goto error_free_device;
+ }
+
+ if (!client) {
+ error = ~ENODEV;
+ cyttsp_xdebug1("err client is Null\n");
+ goto error_free_device;
+ }
+
+ if (!ts) {
+ error = ~ENODEV;
+ cyttsp_xdebug1("err context is Null\n");
+ goto error_free_device;
+ }
+
+ ts->input = input_device;
+ input_device->name = CY_I2C_NAME;
+ input_device->phys = ts->phys;
+ input_device->dev.parent = &client->dev;
+
+ /* init the touch structures */
+ ts->num_prv_st_tch = CY_NTCH;
+ for (id = 0; id < CY_NUM_TRK_ID; id++) {
+ ts->act_trk[id] = CY_NTCH;
+ ts->prv_mt_pos[id][CY_XPOS] = 0;
+ ts->prv_mt_pos[id][CY_YPOS] = 0;
+ }
+
+ for (id = 0; id < CY_NUM_MT_TCH_ID; id++)
+ ts->prv_mt_tch[id] = CY_IGNR_TCH;
+
+ for (id = 0; id < CY_NUM_ST_TCH_ID; id++)
+ ts->prv_st_tch[id] = CY_IGNR_TCH;
+
+ set_bit(EV_SYN, input_device->evbit);
+ set_bit(EV_KEY, input_device->evbit);
+ set_bit(EV_ABS, input_device->evbit);
+ set_bit(BTN_TOUCH, input_device->keybit);
+ set_bit(BTN_2, input_device->keybit);
+ if (ts->platform_data->use_gestures)
+ set_bit(BTN_3, input_device->keybit);
+
+ input_set_abs_params(input_device,
+ ABS_X, 0, ts->platform_data->maxx, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_Y, 0, ts->platform_data->maxy, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_TOOL_WIDTH, 0, CY_LARGE_TOOL_WIDTH, 0 , 0);
+ input_set_abs_params(input_device,
+ ABS_PRESSURE, 0, CY_MAXZ, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_HAT0X, 0, ts->platform_data->maxx, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_HAT0Y, 0, ts->platform_data->maxy, 0, 0);
+ if (ts->platform_data->use_gestures) {
+ input_set_abs_params(input_device,
+ ABS_HAT1X, 0, CY_MAXZ, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_HAT1Y, 0, CY_MAXZ, 0, 0);
+ }
+ if (ts->platform_data->use_mt) {
+ input_set_abs_params(input_device,
+ ABS_MT_POSITION_X, 0, ts->platform_data->maxx, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_MT_POSITION_Y, 0, ts->platform_data->maxy, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_MT_TOUCH_MAJOR, 0, CY_MAXZ, 0, 0);
+ input_set_abs_params(input_device,
+ ABS_MT_WIDTH_MAJOR, 0, CY_LARGE_TOOL_WIDTH, 0, 0);
+ if (ts->platform_data->use_trk_id) {
+ input_set_abs_params(input_device,
+ ABS_MT_TRACKING_ID, 0, CY_NUM_TRK_ID, 0, 0);
+ }
+ }
+
+ /* set dummy key to make driver work with virtual keys */
+ input_set_capability(input_device, EV_KEY, KEY_PROG1);
+
+ cyttsp_info("%s: Register input device\n", CY_I2C_NAME);
+ error = input_register_device(input_device);
+ if (error) {
+ cyttsp_alert("%s: Failed to register input device\n", \
+ CY_I2C_NAME);
+ retval = error;
+ goto error_free_device;
+ }
+
+ /* Prepare our worker structure prior to setting up the timer/ISR */
+ INIT_WORK(&ts->work, cyttsp_xy_worker);
+
+ /* Power on the chip and make sure that I/Os are set as specified
+ * in the platform */
+ if (ts->platform_data->init)
+ retval = ts->platform_data->init(client);
+
+ if (!(retval < CY_OK))
+ retval = cyttsp_power_on(ts);
+
+ if (retval < 0)
+ goto error_free_device;
+
+ /* Timer or Interrupt setup */
+ if (ts->client->irq == 0) {
+ cyttsp_info("Setting up timer\n");
+ setup_timer(&ts->timer, cyttsp_timer, (unsigned long) ts);
+ mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
+ } else {
+ cyttsp_info("Setting up interrupt\n");
+ /* request_irq() will also call enable_irq() */
+ error = request_irq(client->irq, cyttsp_irq,
+ IRQF_TRIGGER_FALLING,
+ client->dev.driver->name, ts);
+ if (error) {
+ cyttsp_alert("error: could not request irq\n");
+ retval = error;
+ goto error_free_irq;
+ }
+ }
+
+ irq_cnt = 0;
+ irq_cnt_total = 0;
+ irq_err_cnt = 0;
+
+ atomic_set(&ts->irq_enabled, 1);
+ retval = device_create_file(&ts->client->dev, &dev_attr_irq_enable);
+ if (retval < CY_OK) {
+ cyttsp_alert("File device creation failed: %d\n", retval);
+ retval = -ENODEV;
+ goto error_free_irq;
+ }
+
+ cyttsp_info("%s: Successful registration\n", CY_I2C_NAME);
+ goto success;
+
+error_free_irq:
+ cyttsp_alert("Error: Failed to register IRQ handler\n");
+ free_irq(client->irq, ts);
+
+error_free_device:
+ if (input_device)
+ input_free_device(input_device);
+
+success:
+ return retval;
+}
+
+/* I2C driver probe function */
+static int __devinit cyttsp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct cyttsp *ts;
+ int error;
+ int retval = CY_OK;
+
+ cyttsp_info("Start Probe 1.2\n");
+
+ /* allocate and clear memory */
+ ts = kzalloc(sizeof(struct cyttsp), GFP_KERNEL);
+ if (ts == NULL) {
+ cyttsp_xdebug1("err kzalloc for cyttsp\n");
+ retval = -ENOMEM;
+ }
+
+ if (!(retval < CY_OK)) {
+ /* register driver_data */
+ ts->client = client;
+ ts->platform_data = client->dev.platform_data;
+ i2c_set_clientdata(client, ts);
+
+ error = cyttsp_initialize(client, ts);
+ if (error) {
+ cyttsp_xdebug1("err cyttsp_initialize\n");
+ if (ts != NULL) {
+ /* deallocate memory */
+ kfree(ts);
+ }
+/*
+ i2c_del_driver(&cyttsp_driver);
+*/
+ retval = -ENODEV;
+ } else
+ cyttsp_openlog();
+ }
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ if (!(retval < CY_OK)) {
+ ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
+ ts->early_suspend.suspend = cyttsp_early_suspend;
+ ts->early_suspend.resume = cyttsp_late_resume;
+ register_early_suspend(&ts->early_suspend);
+ }
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+
+ cyttsp_info("Start Probe %s\n", \
+ (retval < CY_OK) ? "FAIL" : "PASS");
+
+ return retval;
+}
+
+/* Function to manage power-on resume */
+static int cyttsp_resume(struct i2c_client *client)
+{
+ struct cyttsp *ts;
+ int retval = CY_OK;
+
+ cyttsp_debug("Wake Up\n");
+ ts = (struct cyttsp *) i2c_get_clientdata(client);
+
+ /* re-enable the interrupt prior to wake device */
+ if (ts->client->irq)
+ enable_irq(ts->client->irq);
+
+ if (ts->platform_data->use_sleep &&
+ (ts->platform_data->power_state != CY_ACTIVE_STATE)) {
+ if (ts->platform_data->resume)
+ retval = ts->platform_data->resume(client);
+ if (!(retval < CY_OK)) {
+ retval = i2c_smbus_read_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(struct cyttsp_bootloader_data_t),
+ (u8 *)&g_bl_data);
+ if (!(retval < CY_OK) &&
+ GET_BOOTLOADERMODE(g_bl_data.bl_status)) {
+ u8 tries;
+ retval = i2c_smbus_write_i2c_block_data(
+ ts->client,
+ CY_REG_BASE,
+ sizeof(bl_cmd), bl_cmd);
+ /* switch back to operational mode */
+ tries = 0;
+ mdelay(10);
+ while (GET_BOOTLOADERMODE(g_bl_data.bl_status)
+ && tries++ < 10) {
+ mdelay(100);
+ cyttsp_putbl(ts, 16,
+ false, false, false);
+ }
+ }
+ }
+ }
+
+ if (!(retval < CY_OK) &&
+ (GET_HSTMODE(g_bl_data.bl_file) == CY_OK)) {
+ ts->platform_data->power_state = CY_ACTIVE_STATE;
+
+ /* re-enable the timer after resuming */
+ if (ts->client->irq == 0)
+ mod_timer(&ts->timer, jiffies + TOUCHSCREEN_TIMEOUT);
+ } else
+ retval = -ENODEV;
+
+ cyttsp_debug("Wake Up %s\n", \
+ (retval < CY_OK) ? "FAIL" : "PASS");
+
+ return retval;
+}
+
+
+/* Function to manage low power suspend */
+static int cyttsp_suspend(struct i2c_client *client, pm_message_t message)
+{
+ struct cyttsp *ts;
+ u8 sleep_mode = CY_OK;
+ int retval = CY_OK;
+
+ cyttsp_debug("Enter Sleep\n");
+ ts = (struct cyttsp *) i2c_get_clientdata(client);
+
+ /* disable worker */
+ if (ts->client->irq == 0)
+ del_timer(&ts->timer);
+ else
+ disable_irq_nosync(ts->client->irq);
+ retval = cancel_work_sync(&ts->work);
+
+ if (retval)
+ enable_irq(ts->client->irq);
+
+ if (!(retval < CY_OK)) {
+ if (ts->platform_data->use_sleep &&
+ (ts->platform_data->power_state == CY_ACTIVE_STATE)) {
+ if (ts->platform_data->use_sleep & CY_USE_DEEP_SLEEP_SEL)
+ sleep_mode = CY_DEEP_SLEEP_MODE;
+ else
+ sleep_mode = CY_LOW_PWR_MODE;
+
+ retval = i2c_smbus_write_i2c_block_data(ts->client,
+ CY_REG_BASE,
+ sizeof(sleep_mode), &sleep_mode);
+ }
+ }
+
+ if (!(retval < CY_OK)) {
+ if (sleep_mode == CY_DEEP_SLEEP_MODE)
+ ts->platform_data->power_state = CY_SLEEP_STATE;
+ else if (sleep_mode == CY_LOW_PWR_MODE)
+ ts->platform_data->power_state = CY_LOW_PWR_STATE;
+ }
+
+ cyttsp_debug("Sleep Power state is %s\n", \
+ (ts->platform_data->power_state == CY_ACTIVE_STATE) ? \
+ "ACTIVE" : \
+ ((ts->platform_data->power_state == CY_SLEEP_STATE) ? \
+ "SLEEP" : "LOW POWER"));
+
+ return retval;
+}
+
+/* registered in driver struct */
+static int __devexit cyttsp_remove(struct i2c_client *client)
+{
+ struct cyttsp *ts;
+ int err;
+
+ cyttsp_alert("Unregister\n");
+
+ /* clientdata registered on probe */
+ ts = i2c_get_clientdata(client);
+ device_remove_file(&ts->client->dev, &dev_attr_irq_enable);
+
+ /* Start cleaning up by removing any delayed work and the timer */
+ if (cancel_delayed_work((struct delayed_work *)&ts->work) < CY_OK)
+ cyttsp_alert("error: could not remove work from workqueue\n");
+
+ /* free up timer or irq */
+ if (ts->client->irq == 0) {
+ err = del_timer(&ts->timer);
+ if (err < CY_OK)
+ cyttsp_alert("error: failed to delete timer\n");
+ } else
+ free_irq(client->irq, ts);
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ unregister_early_suspend(&ts->early_suspend);
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+
+ /* housekeeping */
+ if (ts != NULL)
+ kfree(ts);
+
+ cyttsp_alert("Leaving\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void cyttsp_early_suspend(struct early_suspend *handler)
+{
+ struct cyttsp *ts;
+
+ ts = container_of(handler, struct cyttsp, early_suspend);
+ cyttsp_suspend(ts->client, PMSG_SUSPEND);
+}
+
+static void cyttsp_late_resume(struct early_suspend *handler)
+{
+ struct cyttsp *ts;
+
+ ts = container_of(handler, struct cyttsp, early_suspend);
+ cyttsp_resume(ts->client);
+}
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+
+static int cyttsp_init(void)
+{
+ int ret;
+
+ cyttsp_info("Cypress TrueTouch(R) Standard Product\n");
+ cyttsp_info("I2C Touchscreen Driver (Built %s @ %s)\n", \
+ __DATE__, __TIME__);
+
+ cyttsp_ts_wq = create_singlethread_workqueue("cyttsp_ts_wq");
+ if (cyttsp_ts_wq == NULL) {
+ cyttsp_debug("No memory for cyttsp_ts_wq\n");
+ return -ENOMEM;
+ }
+
+ ret = i2c_add_driver(&cyttsp_driver);
+
+ return ret;
+}
+
+static void cyttsp_exit(void)
+{
+ if (cyttsp_ts_wq)
+ destroy_workqueue(cyttsp_ts_wq);
+ return i2c_del_driver(&cyttsp_driver);
+}
+
+module_init(cyttsp_init);
+module_exit(cyttsp_exit);
+
diff --git a/include/linux/cyttsp.h b/include/linux/cyttsp.h
new file mode 100644
index 0000000..2ab1a5c
--- /dev/null
+++ b/include/linux/cyttsp.h
@@ -0,0 +1,649 @@
+/* Header file for:
+ * Cypress TrueTouch(TM) Standard Product touchscreen drivers.
+ * include/linux/cyttsp.h
+ *
+ * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Cypress reserves the right to make changes without further notice
+ * to the materials described herein. Cypress does not assume any
+ * liability arising out of the application described herein.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com
+ *
+ */
+
+
+#ifndef __CYTTSP_H__
+#define __CYTTSP_H__
+
+#include <linux/input.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#define CYPRESS_TTSP_NAME "cyttsp"
+#define CY_I2C_NAME "cyttsp-i2c"
+#define CY_SPI_NAME "cyttsp-spi"
+
+#ifdef CY_DECLARE_GLOBALS
+ uint32_t cyttsp_tsdebug;
+ module_param_named(tsdebug, cyttsp_tsdebug, uint, 0664);
+ uint32_t cyttsp_tsxdebug;
+ module_param_named(tsxdebug, cyttsp_tsxdebug, uint, 0664);
+
+ uint32_t cyttsp_disable_touch;
+ module_param_named(disable_touch, cyttsp_disable_touch, uint, 0664);
+#else
+ extern uint32_t cyttsp_tsdebug;
+ extern uint32_t cyttsp_tsxdebug;
+ extern uint32_t cyttsp_disable_touch;
+#endif
+
+
+
+/******************************************************************************
+ * Global Control, Used to control the behavior of the driver
+ */
+
+/* defines for Gen2 (Txx2xx); Gen3 (Txx3xx)
+ * use these defines to set cyttsp_platform_data.gen in board config file
+ */
+#define CY_GEN2 2
+#define CY_GEN3 3
+
+/* define for using I2C driver
+ */
+#define CY_USE_I2C_DRIVER
+
+/* defines for using SPI driver */
+/*
+#define CY_USE_SPI_DRIVER
+ */
+#define CY_SPI_DFLT_SPEED_HZ 1000000
+#define CY_SPI_MAX_SPEED_HZ 4000000
+#define CY_SPI_SPEED_HZ CY_SPI_DFLT_SPEED_HZ
+#define CY_SPI_BITS_PER_WORD 8
+#define CY_SPI_DAV 139 /* set correct gpio id */
+#define CY_SPI_BUFSIZE 512
+
+
+/* define for inclusion of TTSP App Update Load File
+ * use this define if update to the TTSP Device is desired
+ */
+/*
+#define CY_INCLUDE_LOAD_FILE
+*/
+
+/* define if force new load file for bootloader load */
+/*
+#define CY_FORCE_FW_UPDATE
+*/
+
+/* undef for production use */
+/*
+ */
+#define CY_USE_DEBUG
+
+/* undef for irq use; use this define in the board configuration file */
+/*
+#define CY_USE_TIMER
+ */
+
+/* undef to allow use of extra debug capability */
+/*
+#define CY_ALLOW_EXTRA_DEBUG
+*/
+
+/* undef to remove additional debug prints */
+/*
+#define CY_USE_EXTRA_DEBUG
+*/
+
+/* undef to remove additional debug prints */
+/*
+#define CY_USE_EXTRA_DEBUG1
+ */
+
+/* undef to use operational touch timer jiffies; else use test jiffies */
+/*
+#define CY_USE_TIMER_DEBUG
+ */
+
+/* define to use canned test data */
+/*
+#define CY_USE_TEST_DATA
+ */
+
+/* define to activate power management */
+/*
+#define CY_USE_LOW_POWER
+ */
+
+/* define if wake on i2c addr is activated */
+/*
+#define CY_USE_DEEP_SLEEP
+ */
+
+/* define if gesture signaling is used
+ * and which gesture groups to use
+ */
+/*
+#define CY_USE_GEST
+#define CY_USE_GEST_GRP1
+#define CY_USE_GEST_GRP2
+#define CY_USE_GEST_GRP3
+#define CY_USE_GEST_GRP4
+ */
+/* Active distance in pixels for a gesture to be reported
+ * if set to 0, then all gesture movements are reported
+ */
+#define CY_ACT_DIST_DFLT 8
+#define CY_ACT_DIST CY_ACT_DIST_DFLT
+
+/* define if MT signals are desired */
+/*
+*/
+#define CY_USE_MT_SIGNALS
+
+/* define if MT tracking id signals are used */
+/*
+#define CY_USE_MT_TRACK_ID
+ */
+
+/* define if ST signals are required */
+/*
+#define CY_USE_ST_SIGNALS
+*/
+
+/* define to send handshake to device */
+/*
+#define CY_USE_HNDSHK
+*/
+
+/* define if log all raw motion signals to a sysfs file */
+/*
+#define CY_LOG_TO_FILE
+*/
+
+
+/* End of the Global Control section
+ ******************************************************************************
+ */
+#define CY_DIFF(m, n) ((m) != (n))
+
+#ifdef CY_LOG_TO_FILE
+ #define cyttsp_openlog() /* use sysfs */
+#else
+ #define cyttsp_openlog()
+#endif /* CY_LOG_TO_FILE */
+
+/* see kernel.h for pr_xxx def'ns */
+#define cyttsp_info(f, a...) pr_info("%s:" f, __func__ , ## a)
+#define cyttsp_error(f, a...) pr_err("%s:" f, __func__ , ## a)
+#define cyttsp_alert(f, a...) pr_alert("%s:" f, __func__ , ## a)
+
+#ifdef CY_USE_DEBUG
+ #define cyttsp_debug(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_debug(f, a...) {if (cyttsp_tsdebug) \
+ pr_alert("%s:" f, __func__ , ## a); }
+#endif /* CY_USE_DEBUG */
+
+#ifdef CY_ALLOW_EXTRA_DEBUG
+#ifdef CY_USE_EXTRA_DEBUG
+ #define cyttsp_xdebug(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_xdebug(f, a...) {if (cyttsp_tsxdebug) \
+ pr_alert("%s:" f, __func__ , ## a); }
+#endif /* CY_USE_EXTRA_DEBUG */
+
+#ifdef CY_USE_EXTRA_DEBUG1
+ #define cyttsp_xdebug1(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_xdebug1(f, a...)
+#endif /* CY_USE_EXTRA_DEBUG1 */
+#else
+ #define cyttsp_xdebug(f, a...)
+ #define cyttsp_xdebug1(f, a...)
+#endif /* CY_ALLOW_EXTRA_DEBUG */
+
+#ifdef CY_USE_TIMER_DEBUG
+ #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(1000))
+#else
+ #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(28))
+#endif
+
+/* reduce extra signals in MT only build
+ * be careful not to lose backward compatibility for pre-MT apps
+ */
+#ifdef CY_USE_ST_SIGNALS
+ #define CY_USE_ST 1
+#else
+ #define CY_USE_ST 0
+#endif /* CY_USE_ST_SIGNALS */
+
+/* rely on kernel input.h to define Multi-Touch capability */
+/* if input.h defines the Multi-Touch signals, then use MT */
+#if defined(ABS_MT_TOUCH_MAJOR) && defined(CY_USE_MT_SIGNALS)
+ #define CY_USE_MT 1
+ #define CY_MT_SYNC(input) input_mt_sync(input)
+#else
+ #define CY_USE_MT 0
+ #define CY_MT_SYNC(input)
+ /* the following includes are provided to ensure a compile;
+ * the code that compiles with these defines will not be executed if
+ * the CY_USE_MT is properly used in the platform structure init
+ */
+ #ifndef ABS_MT_TOUCH_MAJOR
+ #define ABS_MT_TOUCH_MAJOR 0x30 /* touching ellipse */
+ #define ABS_MT_TOUCH_MINOR 0x31 /* (omit if circular) */
+ #define ABS_MT_WIDTH_MAJOR 0x32 /* approaching ellipse */
+ #define ABS_MT_WIDTH_MINOR 0x33 /* (omit if circular) */
+ #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+ #define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+ #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+ #define ABS_MT_BLOB_ID 0x38 /* Group set of pkts as blob */
+ #endif /* ABS_MT_TOUCH_MAJOR */
+#endif /* ABS_MT_TOUCH_MAJOR and CY_USE_MT_SIGNALS */
+#if defined(ABS_MT_TRACKING_ID) && defined(CY_USE_MT_TRACK_ID)
+ #define CY_USE_TRACKING_ID 1
+#else
+ #define CY_USE_TRACKING_ID 0
+/* define only if not defined already by system;
+ * value based on linux kernel 2.6.30.10
+ */
+#ifndef ABS_MT_TRACKING_ID
+ #define ABS_MT_TRACKING_ID (ABS_MT_BLOB_ID+1)
+#endif
+#endif /* ABS_MT_TRACKING_ID */
+
+#ifdef CY_USE_DEEP_SLEEP
+ #define CY_USE_DEEP_SLEEP_SEL 0x80
+#else
+ #define CY_USE_DEEP_SLEEP_SEL 0x00
+#endif
+#ifdef CY_USE_LOW_POWER
+ #define CY_USE_SLEEP (CY_USE_DEEP_SLEEP_SEL | 0x01)
+#else
+ #define CY_USE_SLEEP 0x00
+#endif /* CY_USE_LOW_POWER */
+
+#ifdef CY_USE_TEST_DATA
+ #define cyttsp_testdat(ray1, ray2, sizeofray) \
+ { \
+ int i; \
+ u8 *up1 = (u8 *)ray1; \
+ u8 *up2 = (u8 *)ray2; \
+ for (i = 0; i < sizeofray; i++) { \
+ up1[i] = up2[i]; \
+ } \
+ }
+#else
+ #define cyttsp_testdat(xy, test_xy, sizeofray)
+#endif /* CY_USE_TEST_DATA */
+
+/* helper macros */
+#define GET_NUM_TOUCHES(x) ((x) & 0x0F)
+#define GET_TOUCH1_ID(x) (((x) & 0xF0) >> 4)
+#define GET_TOUCH2_ID(x) ((x) & 0x0F)
+#define GET_TOUCH3_ID(x) (((x) & 0xF0) >> 4)
+#define GET_TOUCH4_ID(x) ((x) & 0x0F)
+#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4)
+#define FLIP_DATA_FLAG 0x01
+#define REVERSE_X_FLAG 0x02
+#define REVERSE_Y_FLAG 0x04
+#define FLIP_DATA(flags) ((flags) & FLIP_DATA_FLAG)
+#define REVERSE_X(flags) ((flags) & REVERSE_X_FLAG)
+#define REVERSE_Y(flags) ((flags) & REVERSE_Y_FLAG)
+#define FLIP_XY(x, y) { \
+ u16 tmp; \
+ tmp = (x); \
+ (x) = (y); \
+ (y) = tmp; \
+ }
+#define INVERT_X(x, xmax) ((xmax) - (x))
+#define INVERT_Y(y, ymax) ((ymax) - (y))
+#define SET_HSTMODE(reg, mode) ((reg) & (mode))
+#define GET_HSTMODE(reg) ((reg & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg) ((reg & 0x10) >> 4)
+
+/* constant definitions */
+/* maximum number of concurrent ST track IDs */
+#define CY_NUM_ST_TCH_ID 2
+
+/* maximum number of concurrent MT track IDs */
+#define CY_NUM_MT_TCH_ID 4
+
+/* maximum number of track IDs */
+#define CY_NUM_TRK_ID 16
+
+#define CY_NTCH 0 /* no touch (lift off) */
+#define CY_TCH 1 /* active touch (touchdown) */
+#define CY_ST_FNGR1_IDX 0
+#define CY_ST_FNGR2_IDX 1
+#define CY_MT_TCH1_IDX 0
+#define CY_MT_TCH2_IDX 1
+#define CY_MT_TCH3_IDX 2
+#define CY_MT_TCH4_IDX 3
+#define CY_XPOS 0
+#define CY_YPOS 1
+#define CY_IGNR_TCH (-1)
+#define CY_SMALL_TOOL_WIDTH 10
+#define CY_LARGE_TOOL_WIDTH 255
+#define CY_REG_BASE 0x00
+#define CY_REG_GEST_SET 0x1E
+#define CY_REG_ACT_INTRVL 0x1D
+#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL+1)
+#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT+1)
+#define CY_SOFT_RESET ((1 << 0))
+#define CY_DEEP_SLEEP ((1 << 1))
+#define CY_LOW_POWER ((1 << 2))
+#define CY_MAXZ 255
+#define CY_OK 0
+#define CY_INIT 1
+#define CY_DLY_DFLT 10 /* ms */
+#define CY_DLY_SYSINFO 20 /* ms */
+#define CY_DLY_BL 300
+#define CY_DLY_DNLOAD 100 /* ms */
+#define CY_NUM_RETRY 4 /* max num touch data read */
+
+/* handshake bit in the hst_mode reg */
+#define CY_HNDSHK_BIT 0x80
+#ifdef CY_USE_HNDSHK
+ #define CY_SEND_HNDSHK 1
+#else
+ #define CY_SEND_HNDSHK 0
+#endif
+
+/* Bootloader File 0 offset */
+#define CY_BL_FILE0 0x00
+
+/* Bootloader command directive */
+#define CY_BL_CMD 0xFF
+
+/* Bootloader Initiate Bootload */
+#define CY_BL_INIT_LOAD 0x38
+
+/* Bootloader Write a Block */
+#define CY_BL_WRITE_BLK 0x39
+
+/* Bootloader Terminate Bootload */
+#define CY_BL_TERMINATE 0x3B
+
+/* Bootloader Exit and Verify Checksum command */
+#define CY_BL_EXIT 0xA5
+
+/* Bootloader default keys */
+#define CY_BL_KEY0 0x00
+#define CY_BL_KEY1 0x01
+#define CY_BL_KEY2 0x02
+#define CY_BL_KEY3 0x03
+#define CY_BL_KEY4 0x04
+#define CY_BL_KEY5 0x05
+#define CY_BL_KEY6 0x06
+#define CY_BL_KEY7 0x07
+
+/* Active Power state scanning/processing refresh interval */
+#define CY_ACT_INTRVL_DFLT 0x00
+
+/* touch timeout for the Active power */
+#define CY_TCH_TMOUT_DFLT 0xFF
+
+/* Low Power state scanning/processing refresh interval */
+#define CY_LP_INTRVL_DFLT 0x0A
+
+#define CY_IDLE_STATE 0
+#define CY_ACTIVE_STATE 1
+#define CY_LOW_PWR_STATE 2
+#define CY_SLEEP_STATE 3
+
+/* device mode bits */
+#define CY_OP_MODE 0x00
+#define CY_SYSINFO_MODE 0x10
+
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE 0x02
+#define CY_LOW_PWR_MODE 0x04
+
+#define CY_NUM_KEY 8
+
+#ifdef CY_USE_GEST
+ #define CY_USE_GESTURES 1
+#else
+ #define CY_USE_GESTURES 0
+#endif /* CY_USE_GESTURE_SIGNALS */
+
+#ifdef CY_USE_GEST_GRP1
+ #define CY_GEST_GRP1 0x10
+#else
+ #define CY_GEST_GRP1 0x00
+#endif /* CY_USE_GEST_GRP1 */
+#ifdef CY_USE_GEST_GRP2
+ #define CY_GEST_GRP2 0x20
+#else
+ #define CY_GEST_GRP2 0x00
+#endif /* CY_USE_GEST_GRP2 */
+#ifdef CY_USE_GEST_GRP3
+ #define CY_GEST_GRP3 0x40
+#else
+ #define CY_GEST_GRP3 0x00
+#endif /* CY_USE_GEST_GRP3 */
+#ifdef CY_USE_GEST_GRP4
+ #define CY_GEST_GRP4 0x80
+#else
+ #define CY_GEST_GRP4 0x00
+#endif /* CY_USE_GEST_GRP4 */
+
+
+struct cyttsp_platform_data {
+ u32 maxx;
+ u32 maxy;
+ u32 flags;
+ u8 gen;
+ u8 use_st;
+ u8 use_mt;
+ u8 use_hndshk;
+ u8 use_trk_id;
+ u8 use_sleep;
+ u8 use_gestures;
+ u8 gest_set;
+ u8 act_intrvl;
+ u8 tch_tmout;
+ u8 lp_intrvl;
+ u8 power_state;
+#ifdef CY_USE_I2C_DRIVER
+ s32 (*init)(struct i2c_client *client);
+ s32 (*resume)(struct i2c_client *client);
+#endif
+#ifdef CY_USE_SPI_DRIVER
+ s32 (*init)(struct spi_device *spi);
+ s32 (*resume)(struct spi_device *spi);
+#endif
+};
+
+/* TrueTouch Standard Product Gen3 (Txx3xx) interface definition */
+struct cyttsp_gen3_xydata_t {
+ u8 hst_mode;
+ u8 tt_mode;
+ u8 tt_stat;
+ u16 x1 __attribute__ ((packed));
+ u16 y1 __attribute__ ((packed));
+ u8 z1;
+ u8 touch12_id;
+ u16 x2 __attribute__ ((packed));
+ u16 y2 __attribute__ ((packed));
+ u8 z2;
+ u8 gest_cnt;
+ u8 gest_id;
+ u16 x3 __attribute__ ((packed));
+ u16 y3 __attribute__ ((packed));
+ u8 z3;
+ u8 touch34_id;
+ u16 x4 __attribute__ ((packed));
+ u16 y4 __attribute__ ((packed));
+ u8 z4;
+ u8 tt_undef[3];
+ u8 gest_set;
+ u8 tt_reserved;
+};
+
+/* TrueTouch Standard Product Gen2 (Txx2xx) interface definition */
+#define CY_GEN2_NOTOUCH 0x03 /* Both touches removed */
+#define CY_GEN2_GHOST 0x02 /* ghost */
+#define CY_GEN2_2TOUCH 0x03 /* 2 touch; no ghost */
+#define CY_GEN2_1TOUCH 0x01 /* 1 touch only */
+#define CY_GEN2_TOUCH2 0x01 /* 1st touch removed;
+ * 2nd touch remains */
+struct cyttsp_gen2_xydata_t {
+ u8 hst_mode;
+ u8 tt_mode;
+ u8 tt_stat;
+ u16 x1 __attribute__ ((packed));
+ u16 y1 __attribute__ ((packed));
+ u8 z1;
+ u8 evnt_idx;
+ u16 x2 __attribute__ ((packed));
+ u16 y2 __attribute__ ((packed));
+ u8 tt_undef1;
+ u8 gest_cnt;
+ u8 gest_id;
+ u8 tt_undef[14];
+ u8 gest_set;
+ u8 tt_reserved;
+};
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data_t {
+ u8 hst_mode;
+ u8 mfg_cmd;
+ u8 mfg_stat;
+ u8 cid[3];
+ u8 tt_undef1;
+ u8 uid[8];
+ u8 bl_verh;
+ u8 bl_verl;
+ u8 tts_verh;
+ u8 tts_verl;
+ u8 app_idh;
+ u8 app_idl;
+ u8 app_verh;
+ u8 app_verl;
+ u8 tt_undef[6];
+ u8 act_intrvl;
+ u8 tch_tmout;
+ u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data_t {
+ u8 bl_file;
+ u8 bl_status;
+ u8 bl_error;
+ u8 blver_hi;
+ u8 blver_lo;
+ u8 bld_blver_hi;
+ u8 bld_blver_lo;
+ u8 ttspver_hi;
+ u8 ttspver_lo;
+ u8 appid_hi;
+ u8 appid_lo;
+ u8 appver_hi;
+ u8 appver_lo;
+ u8 cid_0;
+ u8 cid_1;
+ u8 cid_2;
+};
+
+#define cyttsp_wake_data_t cyttsp_gen3_xydata_t
+#ifdef CY_DECLARE_GLOBALS
+ #ifdef CY_INCLUDE_LOAD_FILE
+ /* this file declares:
+ * firmware download block array (cyttsp_fw[]),
+ * the number of command block records (cyttsp_fw_records),
+ * and the version variables
+ */
+ #include "cyttsp_fw.h" /* imports cyttsp_fw[] array */
+ #define cyttsp_app_load() 1
+ #ifdef CY_FORCE_FW_UPDATE
+ #define cyttsp_force_fw_load() 1
+ #else
+ #define cyttsp_force_fw_load() 0
+ #endif
+
+ #else
+ /* the following declarations are to allow
+ * some debugging capability
+ */
+ unsigned char cyttsp_fw_tts_verh = 0x00;
+ unsigned char cyttsp_fw_tts_verl = 0x01;
+ unsigned char cyttsp_fw_app_idh = 0x02;
+ unsigned char cyttsp_fw_app_idl = 0x03;
+ unsigned char cyttsp_fw_app_verh = 0x04;
+ unsigned char cyttsp_fw_app_verl = 0x05;
+ unsigned char cyttsp_fw_cid_0 = 0x06;
+ unsigned char cyttsp_fw_cid_1 = 0x07;
+ unsigned char cyttsp_fw_cid_2 = 0x08;
+ #define cyttsp_app_load() 0
+ #define cyttsp_force_fw_load() 0
+ #endif
+ #define cyttsp_tts_verh() cyttsp_fw_tts_verh
+ #define cyttsp_tts_verl() cyttsp_fw_tts_verl
+ #define cyttsp_app_idh() cyttsp_fw_app_idh
+ #define cyttsp_app_idl() cyttsp_fw_app_idl
+ #define cyttsp_app_verh() cyttsp_fw_app_verh
+ #define cyttsp_app_verl() cyttsp_fw_app_verl
+ #define cyttsp_cid_0() cyttsp_fw_cid_0
+ #define cyttsp_cid_1() cyttsp_fw_cid_1
+ #define cyttsp_cid_2() cyttsp_fw_cid_2
+ #ifdef CY_USE_TEST_DATA
+ static struct cyttsp_gen2_xydata_t tt_gen2_testray[] = {
+ {0x00}, {0x00}, {0x04},
+ {0x4000}, {0x8000}, {0x80},
+ {0x03},
+ {0x2000}, {0x1000}, {0x00},
+ {0x00},
+ {0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00},
+ {0x00}
+ };
+
+ static struct cyttsp_gen3_xydata_t tt_gen3_testray[] = {
+ {0x00}, {0x00}, {0x04},
+ {0x4000}, {0x8000}, {0x80},
+ {0x12},
+ {0x2000}, {0x1000}, {0xA0},
+ {0x00}, {0x00},
+ {0x8000}, {0x4000}, {0xB0},
+ {0x34},
+ {0x4000}, {0x1000}, {0xC0},
+ {0x00, 0x00, 0x00},
+ {0x00},
+ {0x00}
+ };
+ #endif /* CY_USE_TEST_DATA */
+
+#else
+ extern u8 g_appload_ray[];
+#endif
+
+#endif /* __CYTTSP_H__ */
--
1.6.3.3
---------------------------------------------------------------
This message and any attachments may contain Cypress (or its
subsidiaries) confidential information. If it has been received
in error, please advise the sender and immediately delete this
message.
---------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists