| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1281712686-31308-10-git-send-email-alexandre.bounine@idt.com>
Date: Fri, 13 Aug 2010 11:18:06 -0400
From: Alexandre Bounine <alexandre.bounine@....com>
To: akpm@...ux-foundation.org, linux-kernel@...r.kernel.org,
linuxppc-dev@...abs.org
Cc: Alexandre Bounine <alexandre.bounine@....com>,
Matt Porter <mporter@...nel.crashing.org>,
Li Yang <leoli@...escale.com>,
Kumar Gala <galak@...nel.crashing.org>
Subject: [PATCH 9/9] RapidIO: Add support for IDT CPS Gen2 switches
Add the RIO switch driver and definitions for IDT CPS-1848 and CPS-1616 Gen2
devices.
Signed-off-by: Alexandre Bounine <alexandre.bounine@....com>
Reviewed-by: Thomas Moll <thomas.moll@...go.com>
Cc: Matt Porter <mporter@...nel.crashing.org>
Cc: Li Yang <leoli@...escale.com>
Cc: Kumar Gala <galak@...nel.crashing.org>
---
drivers/rapidio/switches/Kconfig | 7 +
drivers/rapidio/switches/Makefile | 1 +
drivers/rapidio/switches/idt_gen2.c | 439 +++++++++++++++++++++++++++++++++++
include/linux/rio_ids.h | 2 +
include/linux/rio_regs.h | 4 +
5 files changed, 453 insertions(+), 0 deletions(-)
create mode 100644 drivers/rapidio/switches/idt_gen2.c
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
index 2b4e9b2..f47fee5 100644
--- a/drivers/rapidio/switches/Kconfig
+++ b/drivers/rapidio/switches/Kconfig
@@ -20,6 +20,13 @@ config RAPIDIO_TSI568
---help---
Includes support for IDT Tsi568 serial RapidIO switch.
+config RAPIDIO_CPS_GEN2
+ bool "IDT CPS Gen.2 SRIO switch support"
+ depends on RAPIDIO
+ default n
+ ---help---
+ Includes support for ITD CPS Gen.2 serial RapidIO switches.
+
config RAPIDIO_TSI500
bool "Tsi500 Parallel RapidIO switch support"
depends on RAPIDIO
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
index fe4adc3..48d67a6 100644
--- a/drivers/rapidio/switches/Makefile
+++ b/drivers/rapidio/switches/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
+obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
ifeq ($(CONFIG_RAPIDIO_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
new file mode 100644
index 0000000..0de4a9c
--- /dev/null
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -0,0 +1,439 @@
+/*
+ * IDT CPS Gen.2 Serial RapidIO switch family support
+ *
+ * Copyright 2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@....com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+#define LOCAL_RTE_CONF_DESTID_SEL 0x010070
+#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f
+
+#define IDT_LT_ERR_REPORT_EN 0x03100c
+
+#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40)
+#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04
+
+#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40)
+#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c
+#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020
+
+#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100)
+#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10
+
+#define IDT_DEV_CTRL_1 0xf2000c
+#define IDT_DEV_CTRL_1_GENPW 0x02000000
+#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001
+
+#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008
+#define IDT_CFGBLK_ERR_REPORT 0xf20014
+#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002
+
+#define IDT_AUX_PORT_ERR_CAP_EN 0x020000
+#define IDT_AUX_ERR_REPORT_EN 0xf20018
+#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002
+#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001
+
+#define IDT_ISLTL_ADDRESS_CAP 0x021014
+
+#define IDT_RIO_DOMAIN 0xf20020
+#define IDT_RIO_DOMAIN_MASK 0x000000ff
+
+#define IDT_PW_INFO_CSR 0xf20024
+
+#define IDT_SOFT_RESET 0xf20040
+#define IDT_SOFT_RESET_REQ 0x00030097
+
+#define IDT_I2C_MCTRL 0xf20050
+#define IDT_I2C_MCTRL_GENPW 0x04000000
+
+#define IDT_JTAG_CTRL 0xf2005c
+#define IDT_JTAG_CTRL_GENPW 0x00000002
+
+#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100)
+#define IDT_LANE_CTRL_BC 0xffff00
+#define IDT_LANE_CTRL_GENPW 0x00200000
+#define IDT_LANE_DFE_1_BC 0xffff18
+#define IDT_LANE_DFE_2_BC 0xffff1c
+
+#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100)
+#define IDT_PORT_OPS_GENPW 0x08000000
+#define IDT_PORT_OPS_PL_ELOG 0x00000040
+#define IDT_PORT_OPS_LL_ELOG 0x00000020
+#define IDT_PORT_OPS_LT_ELOG 0x00000010
+#define IDT_PORT_OPS_BC 0xf4ff04
+
+#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100)
+
+#define IDT_ERR_CAP 0xfd0000
+#define IDT_ERR_CAP_LOG_OVERWR 0x00000004
+
+#define IDT_ERR_RD 0xfd0004
+
+#define IDT_DEFAULT_ROUTE 0xde
+#define IDT_NO_ROUTE 0xdf
+
+static int
+idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ /*
+ * Select routing table to update
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+ /*
+ * Program destination port for the specified destID
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ (u32)route_destid);
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (u32)route_port);
+
+ return 0;
+}
+
+static int
+idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ /*
+ * Select routing table to read
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)result;
+
+
+ return 0;
+}
+
+static int
+idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+
+ /*
+ * Select routing table to read
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+ for (i = 0x80000000; i <= 0x800000ff;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
+ (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
+ i += 4;
+ }
+
+ return 0;
+}
+
+
+static int
+idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain)
+{
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_RIO_DOMAIN, (u32)sw_domain);
+ return 0;
+}
+
+static int
+idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_RIO_DOMAIN, ®val);
+
+ *sw_domain = (u8)(regval & 0xff);
+
+ return 0;
+}
+
+static int
+idtg2_em_init(struct rio_dev *rdev)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+
+ /*
+ * This routine performs device-specific initialization only.
+ * All standard EM configuration should be performed at upper level.
+ */
+
+ pr_debug("RIO: %s [%d:%d]\n", __func__, destid, hopcount);
+
+ /* Set Port-Write info CSR: PRIO=3 and CRF=1 */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_PW_INFO_CSR, 0x0000e000);
+
+ /*
+ * Configure LT LAYER error reporting.
+ */
+
+ /* Enable standard (RIO.p8) error reporting */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_LT_ERR_REPORT_EN,
+ REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
+ REM_LTL_ERR_UNSUPTR);
+
+ /* Use Port-Writes for LT layer error reporting.
+ * Enable per-port reset
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_DEV_CTRL_1, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_DEV_CTRL_1,
+ regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
+
+ /*
+ * Configure PORT error reporting.
+ */
+
+ /* Report all RIO.p8 errors supported by device */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
+
+ /* Configure repoting of implementation specific errors/events */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_PORT_ISERR_REPORT_EN_BC, IDT_PORT_INIT_TX_ACQUIRED);
+
+ /* Use Port-Writes for port error reporting and enable error logging */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_PORT_OPS_BC, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_PORT_OPS_BC, regval | IDT_PORT_OPS_GENPW |
+ IDT_PORT_OPS_PL_ELOG |
+ IDT_PORT_OPS_LL_ELOG |
+ IDT_PORT_OPS_LT_ELOG);
+ /* Overwrite error log if full */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
+
+ /*
+ * Configure LANE error reporting.
+ */
+
+ /* Disable line error reporting */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_LANE_ERR_REPORT_EN_BC, 0);
+
+ /* Use Port-Writes for lane error reporting (when enabled) */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_LANE_CTRL_BC, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_LANE_CTRL_BC, regval | IDT_LANE_CTRL_GENPW);
+
+ /*
+ * Configure AUX error reporting.
+ */
+
+ /* Disable JTAG and I2C Error capture */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_AUX_PORT_ERR_CAP_EN, 0);
+
+ /* Disable JTAG and I2C Error reporting/logging */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_AUX_ERR_REPORT_EN, 0);
+
+ /* Disable Port-Write notification from JTAG */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_JTAG_CTRL, 0);
+
+ /* Disable Port-Write notification from I2C */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_I2C_MCTRL, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_I2C_MCTRL,
+ regval & ~IDT_I2C_MCTRL_GENPW);
+
+ /*
+ * Configure CFG_BLK error reporting.
+ */
+
+ /* Disable Configuration Block error capture */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_CFGBLK_ERR_CAPTURE_EN, 0);
+
+ /* Disable Port-Writes for Configuration Block error reporting */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_CFGBLK_ERR_REPORT, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_CFGBLK_ERR_REPORT,
+ regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
+
+ /* set TVAL = ~50us */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+
+ return 0;
+}
+
+static int
+idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval, em_perrdet, em_ltlerrdet;
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+ if (em_ltlerrdet) {
+ /* Service Logical/Transport Layer Error(s) */
+ if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
+ /* Implementation specific error reported */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_ISLTL_ADDRESS_CAP, ®val);
+
+ pr_debug("RIO: %s Implementation Specific LTL errors" \
+ " 0x%x @(0x%x)\n",
+ rio_name(rdev), em_ltlerrdet, regval);
+
+ /* Clear implementation specific address capture CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_ISLTL_ADDRESS_CAP, 0);
+
+ }
+ }
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+ if (em_perrdet) {
+ /* Service Port-Level Error(s) */
+ if (em_perrdet & REM_PED_IMPL_SPEC) {
+ /* Implementation Specific port error reported */
+
+ /* Get IS errors reported */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_PORT_ISERR_DET(portnum), ®val);
+
+ pr_debug("RIO: %s Implementation Specific Port" \
+ " errors 0x%x\n", rio_name(rdev), regval);
+
+ /* Clear all implementation specific events */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_PORT_ISERR_DET(portnum), 0);
+ }
+ }
+
+ return 0;
+}
+
+static ssize_t
+idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ ssize_t len = 0;
+ u32 regval;
+
+ while (!rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_ERR_RD, ®val)) {
+ if (!regval) /* 0 = end of log */
+ break;
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "%08x\n", regval);
+ if (len >= (PAGE_SIZE - 10))
+ break;
+ }
+
+ return len;
+}
+
+static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
+
+static int idtg2_sysfs(struct rio_dev *rdev, int create)
+{
+ struct device *dev = &rdev->dev;
+ int err = 0;
+
+ if (create) {
+ /* Initialize sysfs entries */
+ err = device_create_file(dev, &dev_attr_errlog);
+ if (err)
+ dev_err(dev, "Unable create sysfs errlog file\n");
+ } else
+ device_remove_file(dev, &dev_attr_errlog);
+
+
+ return err;
+}
+
+static int idtg2_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ rdev->rswitch->add_entry = idtg2_route_add_entry;
+ rdev->rswitch->get_entry = idtg2_route_get_entry;
+ rdev->rswitch->clr_table = idtg2_route_clr_table;
+ rdev->rswitch->set_domain = idtg2_set_domain;
+ rdev->rswitch->get_domain = idtg2_get_domain;
+ rdev->rswitch->em_init = idtg2_em_init;
+ rdev->rswitch->em_handle = idtg2_em_handler;
+ rdev->rswitch->sw_sysfs = idtg2_sysfs;
+
+ return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1848, idtg2_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS1616, idtg2_switch_init);
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index db50e1c..ee7b6ad 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -34,5 +34,7 @@
#define RIO_DID_IDTCPS16 0x035b
#define RIO_DID_IDTCPS6Q 0x035f
#define RIO_DID_IDTCPS10Q 0x035e
+#define RIO_DID_IDTCPS1848 0x0374
+#define RIO_DID_IDTCPS1616 0x0379
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 49a4dc7..7f98fb6 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -263,6 +263,10 @@
#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
+#define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */
+#define REM_LTL_ERR_UNSOLR 0x00800000 /* Unsolicited Response */
+#define REM_LTL_ERR_UNSUPTR 0x00400000 /* Unsupported Transaction */
+#define REM_LTL_ERR_IMPSPEC 0x000000ff /* Implementation Specific */
#define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */
#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
--
1.7.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists