| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1284676444-23904-1-git-send-email-pavan_savoy@ti.com>
Date: Thu, 16 Sep 2010 18:34:04 -0400
From: pavan_savoy@...com
To: gregkh@...e.de, alan@...rguk.ukuu.org.uk
Cc: devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
Pavan Savoy <pavan_savoy@...com>
Subject: [PATCH] drivers:staging:ti-st: mv headers to ti_wilink_st
From: Pavan Savoy <pavan_savoy@...com>
move all the header information to ti_wilink_st.h.
This header would then not only serve the local modules like the st_core.c,
st_kim.c and st_ll.c but also the external modules/protocol drivers that are
dependent on the shared transport driver.
Also modify the structures to use cleaner u8/u16 types for data coming
in from chip and data parsed out of firmware.
Signed-off-by: Pavan Savoy <pavan_savoy@...com>
---
drivers/staging/ti-st/bt_drv.c | 2 +-
drivers/staging/ti-st/fm.h | 13 -
drivers/staging/ti-st/st.h | 83 -------
drivers/staging/ti-st/st_core.c | 10 +-
drivers/staging/ti-st/st_core.h | 128 -----------
drivers/staging/ti-st/st_kim.c | 5 +-
drivers/staging/ti-st/st_kim.h | 180 ---------------
drivers/staging/ti-st/st_ll.c | 4 +-
drivers/staging/ti-st/st_ll.h | 69 ------
drivers/staging/ti-st/ti_wilink_st.h | 413 ++++++++++++++++++++++++++++++++++
10 files changed, 421 insertions(+), 486 deletions(-)
delete mode 100644 drivers/staging/ti-st/fm.h
delete mode 100644 drivers/staging/ti-st/st.h
delete mode 100644 drivers/staging/ti-st/st_core.h
delete mode 100644 drivers/staging/ti-st/st_kim.h
delete mode 100644 drivers/staging/ti-st/st_ll.h
create mode 100644 drivers/staging/ti-st/ti_wilink_st.h
diff --git a/drivers/staging/ti-st/bt_drv.c b/drivers/staging/ti-st/bt_drv.c
index 61ae988..50da66d 100644
--- a/drivers/staging/ti-st/bt_drv.c
+++ b/drivers/staging/ti-st/bt_drv.c
@@ -24,7 +24,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-#include "st.h"
+#include "ti_wilink_st.h"
#include "bt_drv.h"
/* Define this macro to get debug msg */
diff --git a/drivers/staging/ti-st/fm.h b/drivers/staging/ti-st/fm.h
deleted file mode 100644
index be41453..0000000
--- a/drivers/staging/ti-st/fm.h
+++ /dev/null
@@ -1,13 +0,0 @@
-struct fm_event_hdr {
- unsigned char plen;
-} __attribute__ ((packed));
-
-#define FM_MAX_FRAME_SIZE 0xFF /* TODO: */
-#define FM_EVENT_HDR_SIZE 1 /* size of fm_event_hdr */
-#define ST_FM_CH8_PKT 0x8
-
-/* gps stuff */
-struct gps_event_hdr {
-unsigned char opcode;
-unsigned short plen;
-} __attribute__ ((packed));
diff --git a/drivers/staging/ti-st/st.h b/drivers/staging/ti-st/st.h
deleted file mode 100644
index 1b3060e..0000000
--- a/drivers/staging/ti-st/st.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Shared Transport Header file
- * To be included by the protocol stack drivers for
- * Texas Instruments BT,FM and GPS combo chip drivers
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef ST_H
-#define ST_H
-
-#include <linux/skbuff.h>
-
-/* TODO:
- * Move the following to tty.h upon acceptance
- */
-#define N_TI_WL 20 /* Ldisc for TI's WL BT, FM, GPS combo chips */
-
-/**
- * enum kim_gpio_state - Few protocols such as FM have ACTIVE LOW
- * gpio states for their chip/core enable gpios
- */
-enum kim_gpio_state {
- KIM_GPIO_INACTIVE,
- KIM_GPIO_ACTIVE,
-};
-
-/**
- * enum proto-type - The protocol on WiLink chips which share a
- * common physical interface like UART.
- */
-enum proto_type {
- ST_BT,
- ST_FM,
- ST_GPS,
- ST_MAX,
-};
-
-/**
- * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
- * @type: type of the protocol being registered among the
- * available proto_type(BT, FM, GPS the protocol which share TTY).
- * @recv: the receiver callback pointing to a function in the
- * protocol drivers called by the ST driver upon receiving
- * relevant data.
- * @match_packet: reserved for future use, to make ST more generic
- * @reg_complete_cb: callback handler pointing to a function in protocol
- * handler called by ST when the pending registrations are complete.
- * The registrations are marked pending, in situations when fw
- * download is in progress.
- * @write: pointer to function in ST provided to protocol drivers from ST,
- * to be made use when protocol drivers have data to send to TTY.
- * @priv_data: privdate data holder for the protocol drivers, sent
- * from the protocol drivers during registration, and sent back on
- * reg_complete_cb and recv.
- */
-struct st_proto_s {
- enum proto_type type;
- long (*recv) (void *, struct sk_buff *);
- unsigned char (*match_packet) (const unsigned char *data);
- void (*reg_complete_cb) (void *, char data);
- long (*write) (struct sk_buff *skb);
- void *priv_data;
-};
-
-extern long st_register(struct st_proto_s *);
-extern long st_unregister(enum proto_type);
-
-#endif /* ST_H */
diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c
index fad97d7..03397be 100644
--- a/drivers/staging/ti-st/st_core.c
+++ b/drivers/staging/ti-st/st_core.c
@@ -28,15 +28,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/hci.h>
-#include "fm.h"
-/*
- * packet formats for fm and gps
- * #include "gps.h"
- */
-#include "st_core.h"
-#include "st_kim.h"
-#include "st_ll.h"
-#include "st.h"
+#include "ti_wilink_st.h"
/* strings to be used for rfkill entries and by
* ST Core to be used for sysfs debug entry
diff --git a/drivers/staging/ti-st/st_core.h b/drivers/staging/ti-st/st_core.h
deleted file mode 100644
index 8601320..0000000
--- a/drivers/staging/ti-st/st_core.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Shared Transport Core header file
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef ST_CORE_H
-#define ST_CORE_H
-
-#include <linux/skbuff.h>
-#include "st.h"
-
-/* states of protocol list */
-#define ST_NOTEMPTY 1
-#define ST_EMPTY 0
-
-/*
- * possible st_states
- */
-#define ST_INITIALIZING 1
-#define ST_REG_IN_PROGRESS 2
-#define ST_REG_PENDING 3
-#define ST_WAITING_FOR_RESP 4
-
-/**
- * struct st_data_s - ST core internal structure
- * @st_state: different states of ST like initializing, registration
- * in progress, this is mainly used to return relevant err codes
- * when protocol drivers are registering. It is also used to track
- * the recv function, as in during fw download only HCI events
- * can occur , where as during other times other events CH8, CH9
- * can occur.
- * @tty: tty provided by the TTY core for line disciplines.
- * @ldisc_ops: the procedures that this line discipline registers with TTY.
- * @tx_skb: If for some reason the tty's write returns lesser bytes written
- * then to maintain the rest of data to be written on next instance.
- * This needs to be protected, hence the lock inside wakeup func.
- * @tx_state: if the data is being written onto the TTY and protocol driver
- * wants to send more, queue up data and mark that there is
- * more data to send.
- * @list: the list of protocols registered, only MAX can exist, one protocol
- * can register only once.
- * @rx_state: states to be maintained inside st's tty receive
- * @rx_count: count to be maintained inside st's tty receieve
- * @rx_skb: the skb where all data for a protocol gets accumulated,
- * since tty might not call receive when a complete event packet
- * is received, the states, count and the skb needs to be maintained.
- * @txq: the list of skbs which needs to be sent onto the TTY.
- * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
- * up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
- * from waitq can be moved onto the txq.
- * Needs locking too.
- * @lock: the lock to protect skbs, queues, and ST states.
- * @protos_registered: count of the protocols registered, also when 0 the
- * chip enable gpio can be toggled, and when it changes to 1 the fw
- * needs to be downloaded to initialize chip side ST.
- * @ll_state: the various PM states the chip can be, the states are notified
- * to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
- * @kim_data: reference to the parent encapsulating structure.
- *
- */
-struct st_data_s {
- unsigned long st_state;
- struct tty_struct *tty;
- struct tty_ldisc_ops *ldisc_ops;
- struct sk_buff *tx_skb;
-#define ST_TX_SENDING 1
-#define ST_TX_WAKEUP 2
- unsigned long tx_state;
- struct st_proto_s *list[ST_MAX];
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- struct sk_buff_head txq, tx_waitq;
- spinlock_t lock;
- unsigned char protos_registered;
- unsigned long ll_state;
- void *kim_data;
-};
-
-/**
- * st_int_write -
- * point this to tty->driver->write or tty->ops->write
- * depending upon the kernel version
- */
-int st_int_write(struct st_data_s*, const unsigned char*, int);
-
-/**
- * st_write -
- * internal write function, passed onto protocol drivers
- * via the write function ptr of protocol struct
- */
-long st_write(struct sk_buff *);
-
-/* function to be called from ST-LL */
-void st_ll_send_frame(enum proto_type, struct sk_buff *);
-
-/* internal wake up function */
-void st_tx_wakeup(struct st_data_s *st_data);
-
-/* init, exit entry funcs called from KIM */
-int st_core_init(struct st_data_s **);
-void st_core_exit(struct st_data_s *);
-
-/* ask for reference from KIM */
-void st_kim_ref(struct st_data_s **, int);
-
-#define GPS_STUB_TEST
-#ifdef GPS_STUB_TEST
-int gps_chrdrv_stub_write(const unsigned char*, int);
-void gps_chrdrv_stub_init(void);
-#endif
-
-#endif /*ST_CORE_H */
diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c
index be18c7a..09e2c97 100644
--- a/drivers/staging/ti-st/st_kim.c
+++ b/drivers/staging/ti-st/st_kim.c
@@ -28,15 +28,16 @@
#include <linux/gpio.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-
#include <linux/sched.h>
+#include <linux/rfkill.h>
-#include "st_kim.h"
/* understand BT events for fw response */
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <net/bluetooth/hci.h>
+#include "ti_wilink_st.h"
+
static int kim_probe(struct platform_device *pdev);
static int kim_remove(struct platform_device *pdev);
diff --git a/drivers/staging/ti-st/st_kim.h b/drivers/staging/ti-st/st_kim.h
deleted file mode 100644
index 7de2541..0000000
--- a/drivers/staging/ti-st/st_kim.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Shared Transport Line discipline driver Core
- * Init Manager Module header file
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef ST_KIM_H
-#define ST_KIM_H
-
-#include <linux/types.h>
-#include "st.h"
-#include "st_core.h"
-#include "st_ll.h"
-#include <linux/rfkill.h>
-
-/* time in msec to wait for
- * line discipline to be installed
- */
-#define LDISC_TIME 500
-#define CMD_RESP_TIME 500
-#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) \
- | ((unsigned short)((unsigned char)(b))) << 8))
-
-#define GPIO_HIGH 1
-#define GPIO_LOW 0
-
-/* the Power-On-Reset logic, requires to attempt
- * to download firmware onto chip more than once
- * since the self-test for chip takes a while
- */
-#define POR_RETRY_COUNT 5
-
-/**
- * struct chip_version - save the chip version
- */
-struct chip_version {
- unsigned short full;
- unsigned short chip;
- unsigned short min_ver;
- unsigned short maj_ver;
-};
-
-/**
- * struct kim_data_s - the KIM internal data, embedded as the
- * platform's drv data. One for each ST device in the system.
- * @uim_pid: KIM needs to communicate with UIM to request to install
- * the ldisc by opening UART when protocol drivers register.
- * @kim_pdev: the platform device added in one of the board-XX.c file
- * in arch/XX/ directory, 1 for each ST device.
- * @kim_rcvd: completion handler to notify when data was received,
- * mainly used during fw download, which involves multiple send/wait
- * for each of the HCI-VS commands.
- * @ldisc_installed: completion handler to notify that the UIM accepted
- * the request to install ldisc, notify from tty_open which suggests
- * the ldisc was properly installed.
- * @resp_buffer: data buffer for the .bts fw file name.
- * @fw_entry: firmware class struct to request/release the fw.
- * @gpios: the list of core/chip enable gpios for BT, FM and GPS cores.
- * @rx_state: the rx state for kim's receive func during fw download.
- * @rx_count: the rx count for the kim's receive func during fw download.
- * @rx_skb: all of fw data might not come at once, and hence data storage for
- * whole of the fw response, only HCI_EVENTs and hence diff from ST's
- * response.
- * @rfkill: rfkill data for each of the cores to be registered with rfkill.
- * @rf_protos: proto types of the data registered with rfkill sub-system.
- * @core_data: ST core's data, which mainly is the tty's disc_data
- * @version: chip version available via a sysfs entry.
- *
- */
-struct kim_data_s {
- long uim_pid;
- struct platform_device *kim_pdev;
- struct completion kim_rcvd, ldisc_installed;
- char resp_buffer[30];
- const struct firmware *fw_entry;
- long gpios[ST_MAX];
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- struct rfkill *rfkill[ST_MAX];
- enum proto_type rf_protos[ST_MAX];
- struct st_data_s *core_data;
- struct chip_version version;
-};
-
-/**
- * functions called when 1 of the protocol drivers gets
- * registered, these need to communicate with UIM to request
- * ldisc installed, read chip_version, download relevant fw
- */
-long st_kim_start(void *);
-long st_kim_stop(void *);
-
-void st_kim_recv(void *, const unsigned char *, long count);
-void st_kim_chip_toggle(enum proto_type, enum kim_gpio_state);
-void st_kim_complete(void *);
-void kim_st_list_protocols(struct st_data_s *, void *);
-
-/*
- * BTS headers
- */
-#define ACTION_SEND_COMMAND 1
-#define ACTION_WAIT_EVENT 2
-#define ACTION_SERIAL 3
-#define ACTION_DELAY 4
-#define ACTION_RUN_SCRIPT 5
-#define ACTION_REMARKS 6
-
-/**
- * struct bts_header - the fw file is NOT binary which can
- * be sent onto TTY as is. The .bts is more a script
- * file which has different types of actions.
- * Each such action needs to be parsed by the KIM and
- * relevant procedure to be called.
- */
-struct bts_header {
- uint32_t magic;
- uint32_t version;
- uint8_t future[24];
- uint8_t actions[0];
-} __attribute__ ((packed));
-
-/**
- * struct bts_action - Each .bts action has its own type of
- * data.
- */
-struct bts_action {
- uint16_t type;
- uint16_t size;
- uint8_t data[0];
-} __attribute__ ((packed));
-
-struct bts_action_send {
- uint8_t data[0];
-} __attribute__ ((packed));
-
-struct bts_action_wait {
- uint32_t msec;
- uint32_t size;
- uint8_t data[0];
-} __attribute__ ((packed));
-
-struct bts_action_delay {
- uint32_t msec;
-} __attribute__ ((packed));
-
-struct bts_action_serial {
- uint32_t baud;
- uint32_t flow_control;
-} __attribute__ ((packed));
-
-/**
- * struct hci_command - the HCI-VS for intrepreting
- * the change baud rate of host-side UART, which
- * needs to be ignored, since UIM would do that
- * when it receives request from KIM for ldisc installation.
- */
-struct hci_command {
- uint8_t prefix;
- uint16_t opcode;
- uint8_t plen;
- uint32_t speed;
-} __attribute__ ((packed));
-
-
-#endif /* ST_KIM_H */
diff --git a/drivers/staging/ti-st/st_ll.c b/drivers/staging/ti-st/st_ll.c
index 7a1fb6d..d08b58e 100644
--- a/drivers/staging/ti-st/st_ll.c
+++ b/drivers/staging/ti-st/st_ll.c
@@ -19,7 +19,9 @@
*/
#define pr_fmt(fmt) "(stll) :" fmt
-#include "st_ll.h"
+#include <linux/skbuff.h>
+#include <linux/module.h>
+#include "ti_wilink_st.h"
/**********************************************************************/
/* internal functions */
diff --git a/drivers/staging/ti-st/st_ll.h b/drivers/staging/ti-st/st_ll.h
deleted file mode 100644
index e4dfacd..0000000
--- a/drivers/staging/ti-st/st_ll.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Shared Transport Low Level (ST LL)
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef ST_LL_H
-#define ST_LL_H
-
-#include <linux/skbuff.h>
-#include "st.h"
-#include "st_core.h"
-
-/* ST LL receiver states */
-#define ST_W4_PACKET_TYPE 0
-#define ST_BT_W4_EVENT_HDR 1
-#define ST_BT_W4_ACL_HDR 2
-#define ST_BT_W4_SCO_HDR 3
-#define ST_BT_W4_DATA 4
-#define ST_FM_W4_EVENT_HDR 5
-#define ST_GPS_W4_EVENT_HDR 6
-
-/* ST LL state machines */
-#define ST_LL_ASLEEP 0
-#define ST_LL_ASLEEP_TO_AWAKE 1
-#define ST_LL_AWAKE 2
-#define ST_LL_AWAKE_TO_ASLEEP 3
-#define ST_LL_INVALID 4
-
-/* different PM notifications coming from chip */
-#define LL_SLEEP_IND 0x30
-#define LL_SLEEP_ACK 0x31
-#define LL_WAKE_UP_IND 0x32
-#define LL_WAKE_UP_ACK 0x33
-
-/* initialize and de-init ST LL */
-long st_ll_init(struct st_data_s *);
-long st_ll_deinit(struct st_data_s *);
-
-/**
- * enable/disable ST LL along with KIM start/stop
- * called by ST Core
- */
-void st_ll_enable(struct st_data_s *);
-void st_ll_disable(struct st_data_s *);
-
-/**
- * various funcs used by ST core to set/get the various PM states
- * of the chip.
- */
-unsigned long st_ll_getstate(struct st_data_s *);
-unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
-void st_ll_wakeup(struct st_data_s *);
-
-#endif /* ST_LL_H */
diff --git a/drivers/staging/ti-st/ti_wilink_st.h b/drivers/staging/ti-st/ti_wilink_st.h
new file mode 100644
index 0000000..b4cfced
--- /dev/null
+++ b/drivers/staging/ti-st/ti_wilink_st.h
@@ -0,0 +1,413 @@
+/*
+ * Shared Transport Header file
+ * To be included by the protocol stack drivers for
+ * Texas Instruments BT,FM and GPS combo chip drivers
+ * and made use by the shared transport driver sub-modules.
+ *
+ * Copyright (C) 2009-2010 Texas Instruments
+ * Author: Pavan Savoy <pavan_savoy@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef TI_WILINK_ST_H
+#define TI_WILINK_ST_H
+
+
+/* TODO:
+ * Move the following to tty.h upon acceptance
+ */
+#define N_TI_WL 22 /* Ldisc for TI's WL BT, FM, GPS combo chips */
+
+#ifdef __KERNEL__
+/**
+ * enum kim_gpio_state - Few protocols such as FM have ACTIVE LOW
+ * gpio states for their chip/core enable gpios
+ */
+enum kim_gpio_state {
+ KIM_GPIO_INACTIVE,
+ KIM_GPIO_ACTIVE,
+};
+
+/**
+ * enum proto-type - The protocol on WiLink chips which share a
+ * common physical interface like UART.
+ */
+enum proto_type {
+ ST_BT,
+ ST_FM,
+ ST_GPS,
+ ST_MAX,
+};
+
+/**
+ * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
+ * @type: type of the protocol being registered among the
+ * available proto_type(BT, FM, GPS the protocol which share TTY).
+ * @recv: the receiver callback pointing to a function in the
+ * protocol drivers called by the ST driver upon receiving
+ * relevant data.
+ * @match_packet: reserved for future use, to make ST more generic
+ * @reg_complete_cb: callback handler pointing to a function in protocol
+ * handler called by ST when the pending registrations are complete.
+ * The registrations are marked pending, in situations when fw
+ * download is in progress.
+ * @write: pointer to function in ST provided to protocol drivers from ST,
+ * to be made use when protocol drivers have data to send to TTY.
+ * @priv_data: privdate data holder for the protocol drivers, sent
+ * from the protocol drivers during registration, and sent back on
+ * reg_complete_cb and recv.
+ */
+struct st_proto_s {
+ enum proto_type type;
+ long (*recv) (void *, struct sk_buff *);
+ unsigned char (*match_packet) (const unsigned char *data);
+ void (*reg_complete_cb) (void *, char data);
+ long (*write) (struct sk_buff *skb);
+ void *priv_data;
+};
+
+extern long st_register(struct st_proto_s *);
+extern long st_unregister(enum proto_type);
+
+
+/*
+ * header information used by the st_core.c
+ */
+
+/* states of protocol list */
+#define ST_NOTEMPTY 1
+#define ST_EMPTY 0
+
+/*
+ * possible st_states
+ */
+#define ST_INITIALIZING 1
+#define ST_REG_IN_PROGRESS 2
+#define ST_REG_PENDING 3
+#define ST_WAITING_FOR_RESP 4
+
+/**
+ * struct st_data_s - ST core internal structure
+ * @st_state: different states of ST like initializing, registration
+ * in progress, this is mainly used to return relevant err codes
+ * when protocol drivers are registering. It is also used to track
+ * the recv function, as in during fw download only HCI events
+ * can occur , where as during other times other events CH8, CH9
+ * can occur.
+ * @tty: tty provided by the TTY core for line disciplines.
+ * @ldisc_ops: the procedures that this line discipline registers with TTY.
+ * @tx_skb: If for some reason the tty's write returns lesser bytes written
+ * then to maintain the rest of data to be written on next instance.
+ * This needs to be protected, hence the lock inside wakeup func.
+ * @tx_state: if the data is being written onto the TTY and protocol driver
+ * wants to send more, queue up data and mark that there is
+ * more data to send.
+ * @list: the list of protocols registered, only MAX can exist, one protocol
+ * can register only once.
+ * @rx_state: states to be maintained inside st's tty receive
+ * @rx_count: count to be maintained inside st's tty receieve
+ * @rx_skb: the skb where all data for a protocol gets accumulated,
+ * since tty might not call receive when a complete event packet
+ * is received, the states, count and the skb needs to be maintained.
+ * @txq: the list of skbs which needs to be sent onto the TTY.
+ * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
+ * up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
+ * from waitq can be moved onto the txq.
+ * Needs locking too.
+ * @lock: the lock to protect skbs, queues, and ST states.
+ * @protos_registered: count of the protocols registered, also when 0 the
+ * chip enable gpio can be toggled, and when it changes to 1 the fw
+ * needs to be downloaded to initialize chip side ST.
+ * @ll_state: the various PM states the chip can be, the states are notified
+ * to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
+ * @kim_data: reference to the parent encapsulating structure.
+ *
+ */
+struct st_data_s {
+ unsigned long st_state;
+ struct tty_struct *tty;
+ struct tty_ldisc_ops *ldisc_ops;
+ struct sk_buff *tx_skb;
+#define ST_TX_SENDING 1
+#define ST_TX_WAKEUP 2
+ unsigned long tx_state;
+ struct st_proto_s *list[ST_MAX];
+ unsigned long rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq, tx_waitq;
+ spinlock_t lock;
+ unsigned char protos_registered;
+ unsigned long ll_state;
+ void *kim_data;
+};
+
+/**
+ * st_int_write -
+ * point this to tty->driver->write or tty->ops->write
+ * depending upon the kernel version
+ */
+int st_int_write(struct st_data_s*, const unsigned char*, int);
+
+/**
+ * st_write -
+ * internal write function, passed onto protocol drivers
+ * via the write function ptr of protocol struct
+ */
+long st_write(struct sk_buff *);
+
+/* function to be called from ST-LL */
+void st_ll_send_frame(enum proto_type, struct sk_buff *);
+
+/* internal wake up function */
+void st_tx_wakeup(struct st_data_s *st_data);
+
+/* init, exit entry funcs called from KIM */
+int st_core_init(struct st_data_s **);
+void st_core_exit(struct st_data_s *);
+
+/* ask for reference from KIM */
+void st_kim_ref(struct st_data_s **, int);
+
+#define GPS_STUB_TEST
+#ifdef GPS_STUB_TEST
+int gps_chrdrv_stub_write(const unsigned char*, int);
+void gps_chrdrv_stub_init(void);
+#endif
+
+
+/*
+ * header information used by st_kim.c
+ */
+
+/* time in msec to wait for
+ * line discipline to be installed
+ */
+#define LDISC_TIME 500
+#define CMD_RESP_TIME 500
+#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) \
+ | ((unsigned short)((unsigned char)(b))) << 8))
+
+#define GPIO_HIGH 1
+#define GPIO_LOW 0
+
+/* the Power-On-Reset logic, requires to attempt
+ * to download firmware onto chip more than once
+ * since the self-test for chip takes a while
+ */
+#define POR_RETRY_COUNT 5
+
+/**
+ * struct chip_version - save the chip version
+ */
+struct chip_version {
+ unsigned short full;
+ unsigned short chip;
+ unsigned short min_ver;
+ unsigned short maj_ver;
+};
+
+/**
+ * struct kim_data_s - the KIM internal data, embedded as the
+ * platform's drv data. One for each ST device in the system.
+ * @uim_pid: KIM needs to communicate with UIM to request to install
+ * the ldisc by opening UART when protocol drivers register.
+ * @kim_pdev: the platform device added in one of the board-XX.c file
+ * in arch/XX/ directory, 1 for each ST device.
+ * @kim_rcvd: completion handler to notify when data was received,
+ * mainly used during fw download, which involves multiple send/wait
+ * for each of the HCI-VS commands.
+ * @ldisc_installed: completion handler to notify that the UIM accepted
+ * the request to install ldisc, notify from tty_open which suggests
+ * the ldisc was properly installed.
+ * @resp_buffer: data buffer for the .bts fw file name.
+ * @fw_entry: firmware class struct to request/release the fw.
+ * @gpios: the list of core/chip enable gpios for BT, FM and GPS cores.
+ * @rx_state: the rx state for kim's receive func during fw download.
+ * @rx_count: the rx count for the kim's receive func during fw download.
+ * @rx_skb: all of fw data might not come at once, and hence data storage for
+ * whole of the fw response, only HCI_EVENTs and hence diff from ST's
+ * response.
+ * @rfkill: rfkill data for each of the cores to be registered with rfkill.
+ * @rf_protos: proto types of the data registered with rfkill sub-system.
+ * @core_data: ST core's data, which mainly is the tty's disc_data
+ * @version: chip version available via a sysfs entry.
+ *
+ */
+struct kim_data_s {
+ long uim_pid;
+ struct platform_device *kim_pdev;
+ struct completion kim_rcvd, ldisc_installed;
+ char resp_buffer[30];
+ const struct firmware *fw_entry;
+ long gpios[ST_MAX];
+ unsigned long rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct rfkill *rfkill[ST_MAX];
+ enum proto_type rf_protos[ST_MAX];
+ struct st_data_s *core_data;
+ struct chip_version version;
+};
+
+/**
+ * functions called when 1 of the protocol drivers gets
+ * registered, these need to communicate with UIM to request
+ * ldisc installed, read chip_version, download relevant fw
+ */
+long st_kim_start(void *);
+long st_kim_stop(void *);
+
+void st_kim_recv(void *, const unsigned char *, long count);
+void st_kim_chip_toggle(enum proto_type, enum kim_gpio_state);
+void st_kim_complete(void *);
+void kim_st_list_protocols(struct st_data_s *, void *);
+
+/*
+ * BTS headers
+ */
+#define ACTION_SEND_COMMAND 1
+#define ACTION_WAIT_EVENT 2
+#define ACTION_SERIAL 3
+#define ACTION_DELAY 4
+#define ACTION_RUN_SCRIPT 5
+#define ACTION_REMARKS 6
+
+/**
+ * struct bts_header - the fw file is NOT binary which can
+ * be sent onto TTY as is. The .bts is more a script
+ * file which has different types of actions.
+ * Each such action needs to be parsed by the KIM and
+ * relevant procedure to be called.
+ */
+struct bts_header {
+ u32 magic;
+ u32 version;
+ u8 future[24];
+ u8 actions[0];
+} __attribute__ ((packed));
+
+/**
+ * struct bts_action - Each .bts action has its own type of
+ * data.
+ */
+struct bts_action {
+ u16 type;
+ u16 size;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_send {
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_wait {
+ u32 msec;
+ u32 size;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct bts_action_delay {
+ u32 msec;
+} __attribute__ ((packed));
+
+struct bts_action_serial {
+ u32 baud;
+ u32 flow_control;
+} __attribute__ ((packed));
+
+/**
+ * struct hci_command - the HCI-VS for intrepreting
+ * the change baud rate of host-side UART, which
+ * needs to be ignored, since UIM would do that
+ * when it receives request from KIM for ldisc installation.
+ */
+struct hci_command {
+ u8 prefix;
+ u16 opcode;
+ u8 plen;
+ u32 speed;
+} __attribute__ ((packed));
+
+/*
+ * header information used by st_ll.c
+ */
+
+/* ST LL receiver states */
+#define ST_W4_PACKET_TYPE 0
+#define ST_BT_W4_EVENT_HDR 1
+#define ST_BT_W4_ACL_HDR 2
+#define ST_BT_W4_SCO_HDR 3
+#define ST_BT_W4_DATA 4
+#define ST_FM_W4_EVENT_HDR 5
+#define ST_GPS_W4_EVENT_HDR 6
+
+/* ST LL state machines */
+#define ST_LL_ASLEEP 0
+#define ST_LL_ASLEEP_TO_AWAKE 1
+#define ST_LL_AWAKE 2
+#define ST_LL_AWAKE_TO_ASLEEP 3
+#define ST_LL_INVALID 4
+
+/* different PM notifications coming from chip */
+#define LL_SLEEP_IND 0x30
+#define LL_SLEEP_ACK 0x31
+#define LL_WAKE_UP_IND 0x32
+#define LL_WAKE_UP_ACK 0x33
+
+/* initialize and de-init ST LL */
+long st_ll_init(struct st_data_s *);
+long st_ll_deinit(struct st_data_s *);
+
+/**
+ * enable/disable ST LL along with KIM start/stop
+ * called by ST Core
+ */
+void st_ll_enable(struct st_data_s *);
+void st_ll_disable(struct st_data_s *);
+
+/**
+ * various funcs used by ST core to set/get the various PM states
+ * of the chip.
+ */
+unsigned long st_ll_getstate(struct st_data_s *);
+unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
+void st_ll_wakeup(struct st_data_s *);
+
+/*
+ * header information for FM and GPS packet
+ * types, the bluetooth header information comes
+ * from standard bluetooth headers like
+ * net/bluetooth/
+ */
+
+struct fm_event_hdr {
+ u8 plen;
+} __attribute__ ((packed));
+
+#define FM_MAX_FRAME_SIZE 0xFF /* TODO: */
+#define FM_EVENT_HDR_SIZE 1 /* size of fm_event_hdr */
+#define ST_FM_CH8_PKT 0x8
+
+/* gps stuff */
+struct gps_event_hdr {
+ u8 opcode;
+ u16 plen;
+} __attribute__ ((packed));
+
+
+#endif /* __KERNEL__ */
+#endif /* TI_WILINK_ST_H */
--
1.6.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists