| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 13 Oct 2010 20:02:11 +0100 (BST)
From: fabio tirapelle <ftirapelle@...oo.it>
To: linux-kernel@...r.kernel.org
Cc: bjorn.helgaas@...com
Subject: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04
Hi
After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120
(sometimes) doesn't work correctly.
I get random the following errors:
tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_init: error -5 on line 826
tda18271_tune: error -5 on line 904
tda18271_set_params: error -5 on line 985
Part of dmesg of 11-OCT-2010
[ 53.216153] DVB: registering new adapter (saa7133[0])
[ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)...
[ 53.840013] tda10048_firmware_upload: waiting for firmware upload
(dvb-fe-tda10048-1.0.fw)...
[ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes.
[ 53.880509] tda10048_firmware_upload: firmware uploading
[ 58.280136] tda10048_firmware_upload: firmware uploaded
[ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264
[ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 59.420157] tda18271_toggle_output: error -5 on line 47
[ 91.004019] Clocksource tsc unstable (delta = -295012684 ns)
[ 256.293639] eth0: link up.
[ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 263.523498] eth0: link down.
[ 265.258740] eth0: link up.
[ 266.460026] eth0: no IPv6 routers present
[ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9869.636178] tda18271_init: error -5 on line 826
[ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9872.636232] tda18271_toggle_output: error -5 on line 47
[ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 9998.240178] tda18271_init: error -5 on line 826
[10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[10001.240190] tda18271_toggle_output: error -5 on line 47
And this is the dmesg of today: even the same errors.
[ 741.252183] tda18271_init: error -5 on line 826
[ 741.252188] tda18271_tune: error -5 on line 904
[ 741.252193] tda18271_set_params: error -5 on line 985
[ 742.268174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 742.268184] tda18271_init: error -5 on line 826
[ 742.268189] tda18271_tune: error -5 on line 904
[ 742.268194] tda18271_set_params: error -5 on line 985
[ 743.284174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 743.284184] tda18271_init: error -5 on line 826
[ 743.284190] tda18271_tune: error -5 on line 904
[ 743.284194] tda18271_set_params: error -5 on line 985
[ 744.300169] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 744.300180] tda18271_init: error -5 on line 826
[ 744.300185] tda18271_tune: error -5 on line 904
[ 744.300190] tda18271_set_params: error -5 on line 985
[ 745.320172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 745.320183] tda18271_init: error -5 on line 826
[ 745.320188] tda18271_tune: error -5 on line 904
[ 745.320193] tda18271_set_params: error -5 on line 985
[ 746.336174] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 746.336185] tda18271_init: error -5 on line 826
[ 746.336190] tda18271_tune: error -5 on line 904
[ 746.336195] tda18271_set_params: error -5 on line 985
[ 747.352170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 747.352181] tda18271_init: error -5 on line 826
[ 747.352187] tda18271_tune: error -5 on line 904
[ 747.352192] tda18271_set_params: error -5 on line 985
[ 748.368172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 748.368183] tda18271_init: error -5 on line 826
[ 748.368188] tda18271_tune: error -5 on line 904
[ 748.368193] tda18271_set_params: error -5 on line 985
[ 749.384179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 749.384191] tda18271_init: error -5 on line 826
[ 749.384196] tda18271_tune: error -5 on line 904
[ 749.384202] tda18271_set_params: error -5 on line 985
[ 750.400172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 750.400182] tda18271_init: error -5 on line 826
[ 750.400188] tda18271_tune: error -5 on line 904
[ 750.400194] tda18271_set_params: error -5 on line 985
[ 751.424170] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
[ 751.424181] tda18271_init: error -5 on line 826
[ 751.424186] tda18271_tune: error -5 on line 904
[ 751.424192] tda18271_set_params: error -5 on line 985
[ 752.440172] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer
returned: -5
Any ideas?
Thanks
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists