linux-kernel - [RFC] blk-cgroup: Allow creation of hierarchical cgroups

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20101102222030.GI7198@redhat.com>
Date:	Tue, 2 Nov 2010 18:20:30 -0400
From:	Vivek Goyal <vgoyal@...hat.com>
To:	Jens Axboe <jaxboe@...ionio.com>,
	linux kernel mailing list <linux-kernel@...r.kernel.org>
Cc:	Gui Jianfeng <guijianfeng@...fujitsu.com>,
	Balbir Singh <balbir@...ux.vnet.ibm.com>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@...fujitsu.com>,
	Li Zefan <lizf@...fujitsu.com>,
	Nauman Rafique <nauman@...gle.com>,
	"Daniel P. Berrange" <berrange@...hat.com>
Subject: [RFC] blk-cgroup: Allow creation of hierarchical cgroups

o Allow hierarchical cgroup creation for blkio controller

o Currently we disallow it as both the io controller policies (throttling
  as well as proportion bandwidth) do not support hierarhical accounting
  and control. But the flip side is that blkio controller can not be used with
  libvirt as libvirt creates a cgroup hierarchy deeper than 1 level.

  <top-level-cgroup-dir>/<controller>/libvirt/qemu/<virtual-machine-groups>

o So this patch will allow creation of cgroup hierarhcy but at the backend
  everything will be treated as flat. So if somebody created a an hierarchy
  like as follows.

			root	
			/  \
		     test1 test2
			|
		     test3

  CFQ and throttling will practically treat all groups at same level.

				pivot
			     /  |   \  \
			root  test1 test2  test3

o Once we have actual support for hierarchical accounting and control
  then we can introduce another cgroup tunable file "blkio.use_hierarchy"
  which will be 0 by default but if user wants to enforce hierarhical
  control then it can be set to 1. This way there should not be any
  ABI problems down the line.

o The only not so pretty part is introduction of extra file "use_hierarchy"
  down the line. Kame-san had mentioned that hierarhical accounting is
  expensive in memory controller hence they keep it off by default. I
  suspect same will be the case for IO controller also as for each IO
  completion we shall have to account IO through hierarchy up to the root.
  if yes, then it probably is not a very bad idea to introduce this extra
  file so that it will be used only when somebody needs it and some people
  might enable hierarchy only in part of the hierarchy. 

o This is how basically memory controller also uses "use_hierarhcy" and
  they also allowed creation of hierarchies when actual backend support
  was not available.

Signed-off-by: Vivek Goyal <vgoyal@...hat.com>
---
 Documentation/cgroups/blkio-controller.txt |   27 +++++++++++++++++++++++++++
 block/blk-cgroup.c                         |    4 ----
 2 files changed, 27 insertions(+), 4 deletions(-)

Index: linux-2.6/block/blk-cgroup.c
===================================================================
--- linux-2.6.orig/block/blk-cgroup.c	2010-10-28 14:19:02.000000000 -0400
+++ linux-2.6/block/blk-cgroup.c	2010-11-02 13:10:13.000000000 -0400
@@ -1452,10 +1452,6 @@ blkiocg_create(struct cgroup_subsys *sub
 		goto done;
 	}

-	/* Currently we do not support hierarchy deeper than two level (0,1) */
-	if (parent != cgroup->top_cgroup)
-		return ERR_PTR(-EPERM);
-
 	blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);
 	if (!blkcg)
 		return ERR_PTR(-ENOMEM);
Index: linux-2.6/Documentation/cgroups/blkio-controller.txt
===================================================================
--- linux-2.6.orig/Documentation/cgroups/blkio-controller.txt	2010-10-28 14:19:01.000000000 -0400
+++ linux-2.6/Documentation/cgroups/blkio-controller.txt	2010-11-02 17:51:52.000000000 -0400
@@ -89,6 +89,33 @@ Throttling/Upper Limit policy

  Limits for writes can be put using blkio.write_bps_device file.

+Hierarchical Cgroups
+====================
+- Currently none of the IO control policy supports hierarhical groups. But
+  cgroup interface does allow creation of hierarhical cgroups and internally
+  IO policies treat them as flat hierarchy.
+
+  So this patch will allow creation of cgroup hierarhcy but at the backend
+  everything will be treated as flat. So if somebody created a hierarchy like
+  as follows.
+
+			root
+			/  \
+		     test1 test2
+			|
+		     test3
+
+  CFQ and throttling will practically treat all groups at same level.
+
+				pivot
+			     /  |   \  \
+			root  test1 test2  test3
+
+  Down the line we can implement hierarchical accounting/control support
+  and also introduce a new cgroup file "use_hierarchy" which will control
+  whether cgroup hierarchy is viewed as flat or hierarchical by the policy.
+  This is how memory controller also has implemented the things.
+
 Various user visible config options
 ===================================
 CONFIG_BLK_CGROUP
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/