| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 3 Nov 2010 18:19:22 -0300
From: Damian Varayud <davarayud@...il.com>
To: gregkh@...e.de, harmonco@...r.orst.edu, sam.j.richardson@...il.com,
devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org
Cc: Medina Raul Ezequiel <ezemed7@...il.com>
Subject: [PATCH 3/3] Staging: comedi: fix brace coding style issue in pcl818.c
This is a patch to the pcl818.c file that fixes up braces, indentation, printk() and overlines warning
and error at initializing variable found by the checkpatch.pl tool
Signed-off-by: Medina Raul Ezequiel <ezemed7@...il.com>
---
drivers/staging/comedi/drivers/pcl818.c | 536 +++++++++++++++++--------------
1 files changed, 296 insertions(+), 240 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index d2bd6f8..6f7420d 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -1,19 +1,19 @@
/*
- comedi/drivers/pcl818.c
+ comedi/drivers/pcl818.c
- Author: Michal Dobes <dobes@...net.cz>
+ Author: Michal Dobes <dobes@...net.cz>
- hardware driver for Advantech cards:
- card: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
- driver: pcl818l, pcl818h, pcl818hd, pcl818hg, pcl818, pcl718
+ hardware driver for Advantech cards:
+ card: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818, PCL-718
+ driver: pcl818l, pcl818h, pcl818hd, pcl818hg, pcl818, pcl718
*/
/*
Driver: pcl818
Description: Advantech PCL-818 cards, PCL-718
Author: Michal Dobes <dobes@...net.cz>
Devices: [Advantech] PCL-818L (pcl818l), PCL-818H (pcl818h),
- PCL-818HD (pcl818hd), PCL-818HG (pcl818hg), PCL-818 (pcl818),
- PCL-718 (pcl718)
+ PCL-818HD (pcl818hd), PCL-818HG (pcl818hg), PCL-818 (pcl818),
+ PCL-718 (pcl718)
Status: works
All cards have 16 SE/8 DIFF ADCs, one or two DACs, 16 DI and 16 DO.
@@ -25,76 +25,77 @@ PCL-818HD and PCL-818HG support 1kword FIFO. Driver support this FIFO
but this code is untested.
A word or two about DMA. Driver support DMA operations at two ways:
1) DMA uses two buffers and after one is filled then is generated
- INT and DMA restart with second buffer. With this mode I'm unable run
- more that 80Ksamples/secs without data dropouts on K6/233.
+ INT and DMA restart with second buffer. With this mode I'm unable run
+ more that 80Ksamples/secs without data dropouts on K6/233.
2) DMA uses one buffer and run in autoinit mode and the data are
- from DMA buffer moved on the fly with 2kHz interrupts from RTC.
- This mode is used if the interrupt 8 is available for allocation.
- If not, then first DMA mode is used. With this I can run at
- full speed one card (100ksamples/secs) or two cards with
- 60ksamples/secs each (more is problem on account of ISA limitations).
- To use this mode you must have compiled kernel with disabled
- "Enhanced Real Time Clock Support".
- Maybe you can have problems if you use xntpd or similar.
- If you've data dropouts with DMA mode 2 then:
- a) disable IDE DMA
- b) switch text mode console to fb.
-
- Options for PCL-818L:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
- [4] - 0, 5=A/D input -5V.. +5V
- 1, 10=A/D input -10V..+10V
- [5] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
- 2 =D/A output unknown (external reference)
-
- Options for PCL-818, PCL-818H:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
- [4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
- 2 =D/A output unknown (external reference)
-
- Options for PCL-818HD, PCL-818HG:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
- 1=use DMA ch 1, 3=use DMA ch 3)
- [3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
- [4] - 0, 5=D/A output 0-5V (internal reference -5V)
- 1, 10=D/A output 0-10V (internal reference -10V)
- 2 =D/A output unknown (external reference)
-
- Options for PCL-718:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
- [4] - 0=A/D Range is +/-10V
- 1= +/-5V
- 2= +/-2.5V
- 3= +/-1V
- 4= +/-0.5V
- 5= user defined bipolar
- 6= 0-10V
- 7= 0-5V
- 8= 0-2V
- 9= 0-1V
- 10= user defined unipolar
- [5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
- 1, 10=D/A outputs 0-10V (internal reference -10V)
- 2=D/A outputs unknown (external reference)
- [6] - 0, 60=max 60kHz A/D sampling
- 1,100=max 100kHz A/D sampling (PCL-718 with Option 001 installed)
+ from DMA buffer moved on the fly with 2kHz interrupts from RTC.
+ This mode is used if the interrupt 8 is available for allocation.
+ If not, then first DMA mode is used. With this I can run at
+ full speed one card (100ksamples/secs) or two cards with
+ 60ksamples/secs each (more is problem on account of ISA limitations).
+ To use this mode you must have compiled kernel with disabled
+ "Enhanced Real Time Clock Support".
+ Maybe you can have problems if you use xntpd or similar.
+ If you've data dropouts with DMA mode 2 then:
+ a) disable IDE DMA
+ b) switch text mode console to fb.
+
+ Options for PCL-818L:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=A/D input -5V.. +5V
+ 1, 10=A/D input -10V..+10V
+ [5] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknown (external reference)
+
+ Options for PCL-818, PCL-818H:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknown (external reference)
+
+ Options for PCL-818HD, PCL-818HG:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA/FIFO (-1=use FIFO, 0=disable both FIFO and DMA,
+ 1=use DMA ch 1, 3=use DMA ch 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0, 5=D/A output 0-5V (internal reference -5V)
+ 1, 10=D/A output 0-10V (internal reference -10V)
+ 2 =D/A output unknown (external reference)
+
+ Options for PCL-718:
+ [0] - IO Base
+ [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ [2] - DMA (0=disable, 1, 3)
+ [3] - 0, 10=10MHz clock for 8254
+ 1= 1MHz clock for 8254
+ [4] - 0=A/D Range is +/-10V
+ 1= +/-5V
+ 2= +/-2.5V
+ 3= +/-1V
+ 4= +/-0.5V
+ 5= user defined bipolar
+ 6= 0-10V
+ 7= 0-5V
+ 8= 0-2V
+ 9= 0-1V
+ 10= user defined unipolar
+ [5] - 0, 5=D/A outputs 0-5V (internal reference -5V)
+ 1, 10=D/A outputs 0-10V (internal reference -10V)
+ 2=D/A outputs unknown (external reference)
+ [6] - 0, 60=max 60kHz A/D sampling
+ 1,100=max 100kHz A/D sampling
+ (PCL-718 with Option 001 installed)
*/
@@ -189,7 +190,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
#define INT_TYPE_AI1_DMA_RTC 9
#define INT_TYPE_AI3_DMA_RTC 10
-#define RTC_IRQ 8
+#define RTC_IRQ 8
#define RTC_IO_EXTENT 0x10
#endif
@@ -241,8 +242,8 @@ static const struct comedi_lrange range_pcl818l_h_ai = { 4, {
};
static const struct comedi_lrange range718_bipolar1 = { 1, {BIP_RANGE(1),} };
-static const struct comedi_lrange range718_bipolar0_5 =
- { 1, {BIP_RANGE(0.5),} };
+static const struct comedi_lrange range718_bipolar0_5 = { 1,
+ {BIP_RANGE(0.5),} };
static const struct comedi_lrange range718_unipolar2 = { 1, {UNI_RANGE(2),} };
static const struct comedi_lrange range718_unipolar1 = { 1, {BIP_RANGE(1),} };
@@ -251,8 +252,8 @@ static int pcl818_attach(struct comedi_device *dev,
static int pcl818_detach(struct comedi_device *dev);
#ifdef unused
-static int RTC_lock = 0; /* RTC lock */
-static int RTC_timer_lock = 0; /* RTC int lock */
+static int RTC_lock; /* RTC lock */
+static int RTC_timer_lock; /* RTC int lock */
#endif
struct pcl818_board {
@@ -261,12 +262,13 @@ struct pcl818_board {
int n_ranges; /* len of range list */
int n_aichan_se; /* num of A/D chans in single ended mode */
int n_aichan_diff; /* num of A/D chans in diferencial mode */
- unsigned int ns_min; /* minimal alllowed delay between samples (in ns) */
+ unsigned int ns_min; /* minimal alllowed delay between
+ samples (in ns) */
int n_aochan; /* num of D/A chans */
int n_dichan; /* num of DI chans */
int n_dochan; /* num of DO chans */
- const struct comedi_lrange *ai_range_type; /* default A/D rangelist */
- const struct comedi_lrange *ao_range_type; /* default D/A rangelist */
+ const struct comedi_lrange *ai_range_type; /* default A/D rangelist */
+ const struct comedi_lrange *ao_range_type; /* default D/A rangelist */
unsigned int io_range; /* len of IO space */
unsigned int IRQbits; /* allowed interrupts */
unsigned int DMAbits; /* allowed DMA chans */
@@ -335,7 +337,7 @@ struct pcl818_private {
unsigned long rtc_iobase; /* RTC port region */
unsigned int rtc_iosize;
unsigned int rtc_irq;
- struct timer_list rtc_irq_timer; /* timer for RTC sanity check */
+ struct timer_list rtc_irq_timer; /* timer for RTC sanity check */
unsigned long rtc_freq; /* RTC int freq */
int rtc_irq_blocked; /* 1=we now do AI with DMA&RTC */
#endif
@@ -346,19 +348,27 @@ struct pcl818_private {
unsigned int dmasamplsize; /* size in samples hwdmasize[0]/2 */
unsigned int last_top_dma; /* DMA pointer in last RTC int */
int next_dma_buf; /* which DMA buffer will be used next round */
- long dma_runs_to_end; /* how many we must permorm DMA transfer to end of record */
- unsigned long last_dma_run; /* how many bytes we must transfer on last DMA page */
- unsigned char neverending_ai; /* if=1, then we do neverending record (you must use cancel()) */
- unsigned int ns_min; /* manimal alllowed delay between samples (in us) for actual card */
+ long dma_runs_to_end; /* how many we must permorm DMA transfer to
+ end of record */
+ unsigned long last_dma_run; /* how many bytes we must transfer
+ on last DMA page */
+ unsigned char neverending_ai; /* if=1, then we do neverending
+ record (you must use cancel()) */
+ unsigned int ns_min; /* manimal alllowed delay between samples
+ (in us) for actual card */
int i8253_osc_base; /* 1/frequency of on board oscilator in ns */
int irq_free; /* 1=have allocated IRQ */
int irq_blocked; /* 1=IRQ now uses any subdev */
- int irq_was_now_closed; /* when IRQ finish, there's stored int818_mode for last interrupt */
- int ai_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma, 3=AI3 int, 4AI3 dma */
- struct comedi_subdevice *last_int_sub; /* ptr to subdevice which now finish */
+ int irq_was_now_closed; /* when IRQ finish, there's stored
+ int818_mode for last interrupt */
+ int ai_mode; /* who now uses IRQ - 1=AI1 int, 2=AI1 dma,
+ 3=AI3 int, 4AI3 dma */
+ struct comedi_subdevice *last_int_sub; /* ptr to subdevice which
+ now finish */
int ai_act_scan; /* how many scans we finished */
int ai_act_chan; /* actual position in actual scan */
- unsigned int act_chanlist[16]; /* MUX setting for actual AI operations */
+ unsigned int act_chanlist[16]; /* MUX setting for actual
+ AI operations */
unsigned int act_chanlist_len; /* how long is actual MUX list */
unsigned int act_chanlist_pos; /* actual position in MUX list */
unsigned int ai_scans; /* len of scanlist */
@@ -374,8 +384,10 @@ struct pcl818_private {
unsigned int ao_readback[2];
};
-static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, /* used for gain list programming */
- 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
+/* used for gain list programming */
+static const unsigned int muxonechan[] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55,
+ 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb,
+ 0xcc, 0xdd, 0xee, 0xff
};
#define devpriv ((struct pcl818_private *)dev->private)
@@ -405,7 +417,7 @@ static int rtc_setfreq_irq(int freq);
/*
==============================================================================
- ANALOG INPUT MODE0, 818 cards, slow version
+ ANALOG INPUT MODE0, 818 cards, slow version
*/
static int pcl818_ai_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -452,8 +464,8 @@ conv_finish:
/*
==============================================================================
- ANALOG OUTPUT MODE0, 818 cards
- only one sample per call is supported
+ ANALOG OUTPUT MODE0, 818 cards
+ only one sample per call is supported
*/
static int pcl818_ao_insn_read(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -462,9 +474,8 @@ static int pcl818_ao_insn_read(struct comedi_device *dev,
int n;
int chan = CR_CHAN(insn->chanspec);
- for (n = 0; n < insn->n; n++) {
+ for (n = 0; n < insn->n; n++)
data[n] = devpriv->ao_readback[chan];
- }
return n;
}
@@ -489,9 +500,9 @@ static int pcl818_ao_insn_write(struct comedi_device *dev,
/*
==============================================================================
- DIGITAL INPUT MODE0, 818 cards
+ DIGITAL INPUT MODE0, 818 cards
- only one sample per call is supported
+ only one sample per call is supported
*/
static int pcl818_di_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -508,9 +519,9 @@ static int pcl818_di_insn_bits(struct comedi_device *dev,
/*
==============================================================================
- DIGITAL OUTPUT MODE0, 818 cards
+ DIGITAL OUTPUT MODE0, 818 cards
- only one sample per call is supported
+ only one sample per call is supported
*/
static int pcl818_do_insn_bits(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -532,8 +543,8 @@ static int pcl818_do_insn_bits(struct comedi_device *dev,
/*
==============================================================================
- analog input interrupt mode 1 & 3, 818 cards
- one sample per interrupt version
+ analog input interrupt mode 1 & 3, 818 cards
+ one sample per interrupt version
*/
static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
{
@@ -556,10 +567,12 @@ static irqreturn_t interrupt_pcl818_ai_mode13_int(int irq, void *d)
conv_finish:
low = inb(dev->iobase + PCL818_AD_LO);
- comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4) | (low >> 4))); /* get one sample */
+ comedi_buf_put(s->async, ((inb(dev->iobase + PCL818_AD_HI) << 4)
+ | (low >> 4)));/* get one sample */
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
- if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
+ /* dropout! */
+ if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {
printk
("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
(low & 0xf),
@@ -570,9 +583,8 @@ conv_finish:
return IRQ_HANDLED;
}
devpriv->act_chanlist_pos++;
- if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+ if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
devpriv->act_chanlist_pos = 0;
- }
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
/* printk("E"); */
@@ -592,7 +604,7 @@ conv_finish:
/*
==============================================================================
- analog input dma mode 1 & 3, 818 cards
+ analog input dma mode 1 & 3, 818 cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
{
@@ -604,7 +616,8 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
disable_dma(devpriv->dma);
devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
- if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) { /* switch dma bufs */
+ /* switch dma bufs */
+ if ((devpriv->dma_runs_to_end) > -1 || devpriv->neverending_ai) {
set_dma_mode(devpriv->dma, DMA_MODE_READ);
flags = claim_dma_lock();
set_dma_addr(devpriv->dma,
@@ -619,8 +632,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
release_dma_lock(flags);
enable_dma(devpriv->dma);
}
- printk("comedi: A/D mode1/3 IRQ \n");
-
+ printk(KERN_ERR "comedi: A/D mode1/3 IRQ\n");
devpriv->dma_runs_to_end--;
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
ptr = (short *)devpriv->dmabuf[1 - devpriv->next_dma_buf];
@@ -629,9 +641,12 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
bufptr = 0;
for (i = 0; i < len; i++) {
- if ((ptr[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
+ /* dropout! */
+ if ((ptr[bufptr] & 0xf) != devpriv->
+ act_chanlist[devpriv->act_chanlist_pos]) {
printk
- ("comedi: A/D mode1/3 DMA - channel dropout %d(card)!=%d(chanlist) at %d !\n",
+ ("comedi: A/D mode1/3 DMA - channel dropout "
+ "%d(card)!=%d(chanlist) at %d !\n",
(ptr[bufptr] & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos],
devpriv->act_chanlist_pos);
@@ -641,12 +656,12 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
return IRQ_HANDLED;
}
- comedi_buf_put(s->async, ptr[bufptr++] >> 4); /* get one sample */
+ /* get one sample */
+ comedi_buf_put(s->async, ptr[bufptr++] >> 4);
devpriv->act_chanlist_pos++;
- if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+ if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
devpriv->act_chanlist_pos = 0;
- }
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
@@ -654,7 +669,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
}
if (!devpriv->neverending_ai)
- if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
@@ -671,7 +686,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int irq, void *d)
#ifdef unused
/*
==============================================================================
- analog input dma mode 1 & 3 over RTC, 818 cards
+ analog input dma mode 1 & 3 over RTC, 818 cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
{
@@ -699,20 +714,24 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
if (top1 != top2)
return IRQ_HANDLED;
- top1 = devpriv->hwdmasize[0] - top1; /* where is now DMA in buffer */
+ /* where is now DMA in buffer */
+ top1 = devpriv->hwdmasize[0] - top1;
top1 >>= 1;
- ofs_dats = top1 - devpriv->last_top_dma; /* new samples from last call */
+ /* new samples from last call */
+ ofs_dats = top1 - devpriv->last_top_dma;
if (ofs_dats < 0)
ofs_dats = (devpriv->dmasamplsize) + ofs_dats;
+ /* exit=no new samples from last call */
if (!ofs_dats)
- return IRQ_HANDLED; /* exit=no new samples from last call */
+ return IRQ_HANDLED;
/* obsluz data */
i = devpriv->last_top_dma - 1;
i &= (devpriv->dmasamplsize - 1);
if (dmabuf[i] != MAGIC_DMA_WORD) { /* DMA overflow! */
comedi_error(dev, "A/D mode1/3 DMA buffer overflow!");
- /* printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],devpriv->dmasamplsize); */
+ /* printk("I %d dmabuf[i] %d %d\n",i,dmabuf[i],
+ devpriv->dmasamplsize); */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@@ -723,9 +742,12 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
bufptr = devpriv->last_top_dma;
for (i = 0; i < ofs_dats; i++) {
- if ((dmabuf[bufptr] & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
+ /* dropout! */
+ if ((dmabuf[bufptr] & 0xf) != devpriv->
+ act_chanlist[devpriv->act_chanlist_pos]) {
printk
- ("comedi: A/D mode1/3 DMA - channel dropout %d!=%d !\n",
+ ("comedi: A/D mode1/3 DMA - channel "
+ "dropout %d!=%d !\n",
(dmabuf[bufptr] & 0xf),
devpriv->
act_chanlist[devpriv->act_chanlist_pos]);
@@ -736,7 +758,8 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
return IRQ_HANDLED;
}
- comedi_buf_put(s->async, dmabuf[bufptr++] >> 4); /* get one sample */
+ /* get one sample */
+ comedi_buf_put(s->async, dmabuf[bufptr++] >> 4);
bufptr &= (devpriv->dmasamplsize - 1);
devpriv->act_chanlist_pos++;
@@ -751,7 +774,8 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
}
if (!devpriv->neverending_ai)
- if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ /* all data sampled */
+ if (devpriv->ai_act_scan == 0) {
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
@@ -776,7 +800,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma_rtc(int irq, void *d)
/*
==============================================================================
- analog input interrupt mode 1 & 3, 818HD/HG cards
+ analog input interrupt mode 1 & 3, 818HD/HG cards
*/
static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
{
@@ -784,7 +808,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
struct comedi_subdevice *s = dev->subdevices + 0;
int i, len, lo;
- outb(0, dev->iobase + PCL818_FI_INTCLR); /* clear fifo int request */
+ outb(0, dev->iobase + PCL818_FI_INTCLR); /* clear fifo int request */
lo = inb(dev->iobase + PCL818_FI_STATUS);
@@ -804,17 +828,19 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
return IRQ_HANDLED;
}
- if (lo & 2) {
+ if (lo & 2)
len = 512;
- } else {
+ else
len = 0;
- }
for (i = 0; i < len; i++) {
lo = inb(dev->iobase + PCL818_FI_DATALO);
- if ((lo & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
+ /* dropout! */
+ if ((lo & 0xf) != devpriv->
+ act_chanlist[devpriv->act_chanlist_pos]) {
printk
- ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
+ ("comedi: A/D mode1/3 FIFO - channel "
+ "dropout %d!=%d !\n",
(lo & 0xf),
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
@@ -823,12 +849,13 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
return IRQ_HANDLED;
}
- comedi_buf_put(s->async, (lo >> 4) | (inb(dev->iobase + PCL818_FI_DATAHI) << 4)); /* get one sample */
+ /* get one sample */
+ comedi_buf_put(s->async, (lo >> 4)
+ | (inb(dev->iobase + PCL818_FI_DATAHI) << 4));
devpriv->act_chanlist_pos++;
- if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len) {
+ if (devpriv->act_chanlist_pos >= devpriv->act_chanlist_len)
devpriv->act_chanlist_pos = 0;
- }
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
@@ -836,7 +863,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
}
if (!devpriv->neverending_ai)
- if (devpriv->ai_act_scan == 0) { /* all data sampled */
+ if (devpriv->ai_act_scan == 0) { /* all data sampled */
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
comedi_event(dev, s);
@@ -851,7 +878,7 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int irq, void *d)
/*
==============================================================================
- INT procedure
+ INT procedure
*/
static irqreturn_t interrupt_pcl818(int irq, void *d)
{
@@ -917,7 +944,7 @@ static irqreturn_t interrupt_pcl818(int irq, void *d)
/*
==============================================================================
- ANALOG INPUT MODE 1 or 3 DMA , 818 cards
+ ANALOG INPUT MODE 1 or 3 DMA , 818 cards
*/
static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
@@ -925,13 +952,16 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
unsigned int flags;
unsigned int bytes;
- printk("mode13dma_int, mode: %d\n", mode);
+ printk(KERN_ERR "mode13dma_int, mode: %d\n", mode);
disable_dma(devpriv->dma); /* disable dma */
bytes = devpriv->hwdmasize[0];
if (!devpriv->neverending_ai) {
- bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short); /* how many */
- devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; /* how many DMA pages we must fiil */
- devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; /* on last dma transfer must be moved */
+ bytes = devpriv->ai_n_chan * devpriv->
+ ai_scans * sizeof(short); /* how many */
+ /* how many DMA pages we must fiil */
+ devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0];
+ /* on last dma transfer must be moved */
+ devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];
devpriv->dma_runs_to_end--;
if (devpriv->dma_runs_to_end >= 0)
bytes = devpriv->hwdmasize[0];
@@ -948,17 +978,19 @@ static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,
if (mode == 1) {
devpriv->ai_mode = INT_TYPE_AI1_DMA;
- outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ+DMA */
+ /* Pacer+IRQ+DMA */
+ outb(0x87 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
} else {
devpriv->ai_mode = INT_TYPE_AI3_DMA;
- outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ+DMA */
+ /* Ext trig+IRQ+DMA */
+ outb(0x86 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
};
}
#ifdef unused
/*
==============================================================================
- ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards
+ ANALOG INPUT MODE 1 or 3 DMA rtc, 818 cards
*/
static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
@@ -989,17 +1021,19 @@ static void pcl818_ai_mode13dma_rtc(int mode, struct comedi_device *dev,
if (mode == 1) {
devpriv->int818_mode = INT_TYPE_AI1_DMA_RTC;
- outb(0x07 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+DMA */
+ /* Pacer+DMA */
+ outb(0x07 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
} else {
devpriv->int818_mode = INT_TYPE_AI3_DMA_RTC;
- outb(0x06 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+DMA */
+ /* Ext trig+DMA */
+ outb(0x06 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
};
}
#endif
/*
==============================================================================
- ANALOG INPUT MODE 1 or 3, 818 cards
+ ANALOG INPUT MODE 1 or 3, 818 cards
*/
static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
struct comedi_subdevice *s)
@@ -1008,7 +1042,7 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
int divisor1 = 0, divisor2 = 0;
unsigned int seglen;
- printk("pcl818_ai_cmd_mode()\n");
+ printk(KERN_ERR "pcl818_ai_cmd_mode()\n");
if ((!dev->irq) && (!devpriv->dma_rtc)) {
comedi_error(dev, "IRQ not defined!");
return -EINVAL;
@@ -1037,13 +1071,14 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
devpriv->dma_runs_to_end = 0;
if ((devpriv->ai_scans == 0) || (devpriv->ai_scans == -1))
- devpriv->neverending_ai = 1; /* well, user want neverending */
+ devpriv->neverending_ai = 1; /* well, user want neverending */
if (mode == 1) {
i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
TRIG_ROUND_NEAREST);
- if (divisor1 == 1) { /* PCL718/818 crash if any divisor is set to 1 */
+ if (divisor1 == 1) { /* PCL718/818 crash if any
+ divisor is set to 1 */
divisor1 = 2;
divisor2 /= 2;
}
@@ -1058,17 +1093,14 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
switch (devpriv->dma) {
case 1: /* DMA */
case 3:
- if (devpriv->dma_rtc == 0) {
+ if (devpriv->dma_rtc == 0)
pcl818_ai_mode13dma_int(mode, dev, s);
- }
#ifdef unused
- else {
+ else
pcl818_ai_mode13dma_rtc(mode, dev, s);
- }
#else
- else {
+ else
return -EINVAL;
- }
#endif
break;
case 0:
@@ -1111,14 +1143,14 @@ static int pcl818_ai_cmd_mode(int mode, struct comedi_device *dev,
break;
}
#endif
- printk("pcl818_ai_cmd_mode() end\n");
+ printk(KERN_ERR "pcl818_ai_cmd_mode() end\n");
return 0;
}
#ifdef unused
/*
==============================================================================
- ANALOG OUTPUT MODE 1 or 3, 818 cards
+ ANALOG OUTPUT MODE 1 or 3, 818 cards
*/
#ifdef PCL818_MODE13_AO
static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
@@ -1147,7 +1179,8 @@ static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
i8253_cascade_ns_to_timer(devpriv->i8253_osc_base, &divisor1,
&divisor2, &it->trigvar,
TRIG_ROUND_NEAREST);
- if (divisor1 == 1) { /* PCL818 crash if any divisor is set to 1 */
+ if (divisor1 == 1) { /* PCL818 crash if any divisor
+ is set to 1 */
divisor1 = 2;
divisor2 /= 2;
}
@@ -1160,10 +1193,12 @@ static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
outb(0, dev->iobase + PCL818_CNTENABLE); /* enable pacer */
if (mode == 1) {
devpriv->int818_mode = INT_TYPE_AO1_INT;
- outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Pacer+IRQ */
+ /* Pacer+IRQ */
+ outb(0x83 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
} else {
devpriv->int818_mode = INT_TYPE_AO3_INT;
- outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL); /* Ext trig+IRQ */
+ /* Ext trig+IRQ */
+ outb(0x82 | (dev->irq << 4), dev->iobase + PCL818_CONTROL);
};
start_pacer(dev, mode, divisor1, divisor2);
@@ -1173,7 +1208,7 @@ static int pcl818_ao_mode13(int mode, struct comedi_device *dev,
/*
==============================================================================
- ANALOG OUTPUT MODE 1, 818 cards
+ ANALOG OUTPUT MODE 1, 818 cards
*/
static int pcl818_ao_mode1(struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
@@ -1183,7 +1218,7 @@ static int pcl818_ao_mode1(struct comedi_device *dev,
/*
==============================================================================
- ANALOG OUTPUT MODE 3, 818 cards
+ ANALOG OUTPUT MODE 3, 818 cards
*/
static int pcl818_ao_mode3(struct comedi_device *dev,
struct comedi_subdevice *s, comedi_trig * it)
@@ -1195,7 +1230,7 @@ static int pcl818_ao_mode3(struct comedi_device *dev,
/*
==============================================================================
- Start/stop pacer onboard pacer
+ Start/stop pacer onboard pacer
*/
static void start_pacer(struct comedi_device *dev, int mode,
unsigned int divisor1, unsigned int divisor2)
@@ -1214,8 +1249,8 @@ static void start_pacer(struct comedi_device *dev, int mode,
/*
==============================================================================
- Check if channel list from user is builded correctly
- If it's ok, then program scan/gain logic
+ Check if channel list from user is builded correctly
+ If it's ok, then program scan/gain logic
*/
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
@@ -1237,7 +1272,9 @@ static int check_channel_list(struct comedi_device *dev,
for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
/* printk("%d. %d * %d\n",i,
- * CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i]));*/
+ * CR_CHAN(it->chanlist[i]),
+ CR_RANGE(it->chanlist[i])
+ );*/
/* we detect loop, this must by finish */
@@ -1245,9 +1282,12 @@ static int check_channel_list(struct comedi_device *dev,
break;
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
- if (nowmustbechan != CR_CHAN(chanlist[i])) { /* channel list isn't continous :-( */
+ /* channel list isn't continous :-( */
+ if (nowmustbechan != CR_CHAN(chanlist[i])) {
printk
- ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+ ("comedi%d: pcl818: channel list must be "
+ "continous! chanlist[%i]=%d but must be "
+ "%d or %d!\n",
dev->minor, i, CR_CHAN(chanlist[i]),
nowmustbechan, CR_CHAN(chanlist[0]));
return 0;
@@ -1258,23 +1298,29 @@ static int check_channel_list(struct comedi_device *dev,
/* check whole chanlist */
for (i = 0, segpos = 0; i < n_chan; i++) {
- /* printk("%d %d=%d %d\n",CR_CHAN(chansegment[i%seglen]),CR_RANGE(chansegment[i%seglen]),CR_CHAN(it->chanlist[i]),CR_RANGE(it->chanlist[i])); */
+ /* printk("%d %d=%d %d\n",
+ CR_CHAN(chansegment[i%seglen]),
+ CR_RANGE(chansegment[i%seglen]),
+ CR_CHAN(it->chanlist[i]),
+ CR_RANGE(it->chanlist[i])); */
if (chanlist[i] != chansegment[i % seglen]) {
printk
- ("comedi%d: pcl818: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
+ ("comedi%d: pcl818: bad channel or range "
+ "number! chanlist[%i]=%d,%d,%d and not "
+ "%d,%d,%d!\n",
dev->minor, i, CR_CHAN(chansegment[i]),
CR_RANGE(chansegment[i]),
CR_AREF(chansegment[i]),
CR_CHAN(chanlist[i % seglen]),
CR_RANGE(chanlist[i % seglen]),
CR_AREF(chansegment[i % seglen]));
- return 0; /* chan/gain list is strange */
+ return 0; /* chan/gain list is strange */
}
}
} else {
seglen = 1;
}
- printk("check_channel_list: seglen %d\n", seglen);
+ printk(KERN_ERR "check_channel_list: seglen %d\n", seglen);
return seglen;
}
@@ -1290,8 +1336,11 @@ static void setup_channel_list(struct comedi_device *dev,
for (i = 0; i < seglen; i++) { /* store range list to card */
devpriv->act_chanlist[i] = CR_CHAN(chanlist[i]);
- outb(muxonechan[CR_CHAN(chanlist[i])], dev->iobase + PCL818_MUX); /* select channel */
- outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE); /* select gain */
+ /* select channel */
+ outb(muxonechan[CR_CHAN(chanlist[i])],
+ dev->iobase + PCL818_MUX);
+ /* select gain */
+ outb(CR_RANGE(chanlist[i]), dev->iobase + PCL818_RANGE);
}
udelay(1);
@@ -1304,15 +1353,14 @@ static void setup_channel_list(struct comedi_device *dev,
/*
==============================================================================
- Check if board is switched to SE (1) or DIFF(0) mode
+ Check if board is switched to SE (1) or DIFF(0) mode
*/
static int check_single_ended(unsigned int port)
{
- if (inb(port + PCL818_STATUS) & 0x20) {
+ if (inb(port + PCL818_STATUS) & 0x20)
return 1;
- } else {
+ else
return 0;
- }
}
/*
@@ -1351,11 +1399,11 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
if (!cmd->stop_src || tmp != cmd->stop_src)
err++;
- if (err) {
+ if (err)
return 1;
- }
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /* step 2: make sure trigger sources
+ are unique and mutually compatible */
if (cmd->start_src != TRIG_NOW) {
cmd->start_src = TRIG_NOW;
@@ -1376,9 +1424,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
err++;
- if (err) {
+ if (err)
return 2;
- }
/* step 3: make sure arguments are trivially compatible */
@@ -1420,9 +1467,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
}
}
- if (err) {
+ if (err)
return 3;
- }
/* step 4: fix up any arguments */
@@ -1437,9 +1483,8 @@ static int ai_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
err++;
}
- if (err) {
+ if (err)
return 4;
- }
/* step 5: complain about special chanlist considerations */
@@ -1460,7 +1505,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
struct comedi_cmd *cmd = &s->async->cmd;
int retval;
- printk("pcl818_ai_cmd()\n");
+ printk(KERN_ERR "pcl818_ai_cmd()\n");
devpriv->ai_n_chan = cmd->chanlist_len;
devpriv->ai_chanlist = cmd->chanlist;
devpriv->ai_flags = cmd->flags;
@@ -1469,17 +1514,16 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->ai_timer1 = 0;
devpriv->ai_timer2 = 0;
- if (cmd->stop_src == TRIG_COUNT) {
+ if (cmd->stop_src == TRIG_COUNT)
devpriv->ai_scans = cmd->stop_arg;
- } else {
+ else
devpriv->ai_scans = 0;
- }
if (cmd->scan_begin_src == TRIG_FOLLOW) { /* mode 1, 3 */
if (cmd->convert_src == TRIG_TIMER) { /* mode 1 */
devpriv->ai_timer1 = cmd->convert_arg;
retval = pcl818_ai_cmd_mode(1, dev, s);
- printk("pcl818_ai_cmd() end\n");
+ printk(KERN_ERR "pcl818_ai_cmd() end\n");
return retval;
}
if (cmd->convert_src == TRIG_EXT) { /* mode 3 */
@@ -1492,13 +1536,13 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
/*
==============================================================================
- cancel any mode 1-4 AI
+ cancel any mode 1-4 AI
*/
static int pcl818_ai_cancel(struct comedi_device *dev,
struct comedi_subdevice *s)
{
if (devpriv->irq_blocked > 0) {
- printk("pcl818_ai_cancel()\n");
+ printk(KERN_ERR "pcl818_ai_cancel()\n");
devpriv->irq_was_now_closed = 1;
switch (devpriv->ai_mode) {
@@ -1513,7 +1557,8 @@ static int pcl818_ai_cancel(struct comedi_device *dev,
if (devpriv->neverending_ai ||
(!devpriv->neverending_ai &&
devpriv->ai_act_scan > 0)) {
- /* wait for running dma transfer to end, do cleanup in interrupt */
+ /* wait for running dma transfer to end, do
+ cleanup in interrupt */
goto end;
}
disable_dma(devpriv->dma);
@@ -1525,13 +1570,15 @@ static int pcl818_ai_cancel(struct comedi_device *dev,
case INT_TYPE_AO1_INT:
case INT_TYPE_AO3_INT:
#endif
- outb(inb(dev->iobase + PCL818_CONTROL) & 0x73, dev->iobase + PCL818_CONTROL); /* Stop A/D */
+ outb(inb(dev->iobase + PCL818_CONTROL) & 0x73,
+ dev->iobase + PCL818_CONTROL); /* Stop A/D */
udelay(1);
start_pacer(dev, -1, 0, 0);
outb(0, dev->iobase + PCL818_AD_LO);
inb(dev->iobase + PCL818_AD_LO);
inb(dev->iobase + PCL818_AD_HI);
- outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
+ /* clear INT request */
+ outb(0, dev->iobase + PCL818_CLRINT);
outb(0, dev->iobase + PCL818_CONTROL); /* Stop A/D */
if (devpriv->usefifo) { /* FIFO shutdown */
outb(0, dev->iobase + PCL818_FI_INTCLR);
@@ -1548,13 +1595,13 @@ static int pcl818_ai_cancel(struct comedi_device *dev,
}
end:
- printk("pcl818_ai_cancel() end\n");
+ printk(KERN_ERR "pcl818_ai_cancel() end\n");
return 0;
}
/*
==============================================================================
- chech for PCL818
+ chech for PCL818
*/
static int pcl818_check(unsigned long iobase)
{
@@ -1577,7 +1624,7 @@ static int pcl818_check(unsigned long iobase)
/*
==============================================================================
- reset whole PCL-818 cards
+ reset whole PCL-818 cards
*/
static void pcl818_reset(struct comedi_device *dev)
{
@@ -1610,7 +1657,7 @@ static void pcl818_reset(struct comedi_device *dev)
#ifdef unused
/*
==============================================================================
- Enable(1)/disable(0) periodic interrupts from RTC
+ Enable(1)/disable(0) periodic interrupts from RTC
*/
static int set_rtc_irq_bit(unsigned char bit)
{
@@ -1632,11 +1679,10 @@ static int set_rtc_irq_bit(unsigned char bit)
save_flags(flags);
cli();
val = CMOS_READ(RTC_CONTROL);
- if (bit) {
+ if (bit)
val |= RTC_PIE;
- } else {
+ else
val &= ~RTC_PIE;
- }
CMOS_WRITE(val, RTC_CONTROL);
CMOS_READ(RTC_INTR_FLAGS);
restore_flags(flags);
@@ -1645,7 +1691,8 @@ static int set_rtc_irq_bit(unsigned char bit)
/*
==============================================================================
- Restart RTC if something stop it (xntpd every 11 mins or large IDE transfers)
+ Restart RTC if something stop it
+ (xntpd every 11 mins or large IDE transfers)
*/
static void rtc_dropped_irq(unsigned long data)
{
@@ -1667,7 +1714,7 @@ static void rtc_dropped_irq(unsigned long data)
/*
==============================================================================
- Set frequency of interrupts from RTC
+ Set frequency of interrupts from RTC
*/
static int rtc_setfreq_irq(int freq)
{
@@ -1698,7 +1745,7 @@ static int rtc_setfreq_irq(int freq)
/*
==============================================================================
- Free any resources that we have claimed
+ Free any resources that we have claimed
*/
static void free_resources(struct comedi_device *dev)
{
@@ -1735,7 +1782,7 @@ static void free_resources(struct comedi_device *dev)
/*
==============================================================================
- Initialization
+ Initialization
*/
static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
@@ -1753,22 +1800,23 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* claim our I/O space */
iobase = it->options[0];
- printk("comedi%d: pcl818: board=%s, ioport=0x%03lx",
+ printk(KERN_ERR "comedi%d: pcl818: board=%s, ioport=0x%03lx",
dev->minor, this_board->name, iobase);
devpriv->io_range = this_board->io_range;
- if ((this_board->fifo) && (it->options[2] == -1)) { /* we've board with FIFO and we want to use FIFO */
+ /* we've board with FIFO and we want to use FIFO */
+ if ((this_board->fifo) && (it->options[2] == -1)) {
devpriv->io_range = PCLx1xFIFO_RANGE;
devpriv->usefifo = 1;
}
if (!request_region(iobase, devpriv->io_range, "pcl818")) {
- printk("I/O port conflict\n");
+ printk(KERN_ERR "I/O port conflict\n");
return -EIO;
}
dev->iobase = iobase;
if (pcl818_check(iobase)) {
- printk(", I can't detect board. FAIL!\n");
+ printk(KERN_ERR ", I can't detect board. FAIL!\n");
return -EIO;
}
@@ -1781,30 +1829,32 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
printk
- (", IRQ %u is out of allowed range, DISABLING IT",
+ (", IRQ %u is out of allowed range, "
+ "DISABLING IT",
irq);
irq = 0; /* Bad IRQ */
} else {
if (request_irq
- (irq, interrupt_pcl818, 0, "pcl818", dev)) {
+ (irq, interrupt_pcl818, 0, "pcl818", dev)
+ ) {
printk
- (", unable to allocate IRQ %u, DISABLING IT",
+ (", unable to allocate IRQ %u, "
+ "DISABLING IT",
irq);
irq = 0; /* Can't use IRQ */
} else {
- printk(", irq=%u", irq);
+ printk(KERN_ERR ", irq=%u", irq);
}
}
}
}
dev->irq = irq;
- if (irq) {
+ if (irq)
devpriv->irq_free = 1;
- } /* 1=we have allocated irq */
- else {
+ /* 1=we have allocated irq */
+ else
devpriv->irq_free = 0;
- }
devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */
devpriv->ai_mode = 0; /* mode of irq */
@@ -1854,27 +1904,32 @@ no_rtc:
}
ret = request_dma(dma, "pcl818");
if (ret) {
- printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ printk(KERN_ERR ", unable to allocate DMA %u, FAIL!\n",
+ dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
- printk(", dma=%u", dma);
+ printk(KERN_ERR ", dma=%u", dma);
pages = 2; /* we need 16KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
printk(", unable to allocate DMA buffer, FAIL!\n");
- /* maybe experiment with try_to_free_pages() will help .... */
+ /* maybe experiment with
+ try_to_free_pages() will help .... */
return -EBUSY; /* no buffer :-( */
}
devpriv->dmapages[0] = pages;
devpriv->hwdmaptr[0] = virt_to_bus((void *)devpriv->dmabuf[0]);
devpriv->hwdmasize[0] = (1 << pages) * PAGE_SIZE;
- /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->hwdmasize[0],PAGE_SIZE); */
- if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
- devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
+ /* printk("%d %d %ld, ",devpriv->dmapages[0],devpriv->
+ hwdmasize[0],PAGE_SIZE); */
+ if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
+ devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL,
+ pages);
if (!devpriv->dmabuf[1]) {
printk
- (", unable to allocate DMA buffer, FAIL!\n");
+ (", unable to allocate DMA buffer, "
+ "FAIL!\n");
return -EBUSY;
}
devpriv->dmapages[1] = pages;
@@ -1900,7 +1955,7 @@ no_dma:
if (check_single_ended(dev->iobase)) {
s->n_chan = this_board->n_aichan_se;
s->subdev_flags |= SDF_COMMON | SDF_GROUND;
- printk(", %dchans S.E. DAC", s->n_chan);
+ printk(KERN_ERR ", %dchans S.E. DAC", s->n_chan);
} else {
s->n_chan = this_board->n_aichan_diff;
s->subdev_flags |= SDF_DIFF;
@@ -1918,8 +1973,9 @@ no_dma:
s->do_cmd = ai_cmd;
}
if (this_board->is_818) {
+ /* secondary range list jumper selectable */
if ((it->options[4] == 1) || (it->options[4] == 10))
- s->range_table = &range_pcl818l_h_ai; /* secondary range list jumper selectable */
+ s->range_table = &range_pcl818l_h_ai;
} else {
switch (it->options[4]) {
case 0:
@@ -2016,18 +2072,18 @@ no_dma:
}
/* select 1/10MHz oscilator */
- if ((it->options[3] == 0) || (it->options[3] == 10)) {
+ if ((it->options[3] == 0) || (it->options[3] == 10))
devpriv->i8253_osc_base = 100;
- } else {
+ else
devpriv->i8253_osc_base = 1000;
- }
/* max sampling speed */
devpriv->ns_min = this_board->ns_min;
if (!this_board->is_818) {
+ /* extended PCL718 to 100kHz DAC */
if ((it->options[6] == 1) || (it->options[6] == 100))
- devpriv->ns_min = 10000; /* extended PCL718 to 100kHz DAC */
+ devpriv->ns_min = 10000;
}
pcl818_reset(dev);
@@ -2039,7 +2095,7 @@ no_dma:
/*
==============================================================================
- Removes device
+ Removes device
*/
static int pcl818_detach(struct comedi_device *dev)
{
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists