| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 13 Nov 2010 16:40:18 +0800
From: Wu Fengguang <fengguang.wu@...el.com>
To: Peter Zijlstra <peterz@...radead.org>
Cc: LKML <linux-kernel@...r.kernel.org>, Ingo Molnar <mingo@...e.hu>,
Nikanth Karthikesan <knikanth@...e.de>,
Yinghai Lu <yinghai@...nel.org>,
David Rientjes <rientjes@...gle.com>,
"Zheng, Shaohui" <shaohui.zheng@...el.com>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-hotplug@...r.kernel.org
Subject: Re: [BUG 2.6.27-rc1] find_busiest_group() LOCKUP
On Thu, Nov 11, 2010 at 09:04:16PM +0800, Peter Zijlstra wrote:
> On Thu, 2010-11-11 at 20:40 +0800, Wu Fengguang wrote:
> > On Thu, Nov 11, 2010 at 08:36:18PM +0800, Peter Zijlstra wrote:
> > > On Thu, 2010-11-11 at 18:06 +0800, Wu Fengguang wrote:
> > > >
> > > > I run into this kernel panic since 2.6.27-rc1. 2.6.36 boots OK.
> > > > It's not yet fixed in 2.6.37-rc1-next-20101110. I can conveniently
> > > > test any debug patches.
> > > >
> > > Happen to have a .config handy? I've never seen this..
> >
> > Here it is.
>
> When I boot that .config and use the sched_debug boot param I get lots
> of interesting stuff:
>
> [ 1.187507] CPU0 attaching sched-domain:
> [ 1.191431] domain 0: span 0-5 level MC
> [ 1.195373] groups: 0 1 2 3 4 5
> [ 1.198812] ERROR: parent span is not a superset of domain->span
> [ 1.204813] domain 1: span 0-4,6 level CPU
> [ 1.209100] ERROR: domain->groups does not contain CPU0
> [ 1.214324] groups: 5 (cpu_power = 6144) 7 (cpu_power = 2048)
> [ 1.220417] ERROR: groups don't span domain->span
> [ 1.225118] domain 2: span 0-7 level NODE
> [ 1.229403] groups:
> [ 1.231868] ERROR: domain->cpu_power not set
>
>
> Looks like something is totally screwy there and we start the
> load-balancer before we actually build the sched domain tree or
> something silly like that.
>
> Will try and figure out how the heck that's happening, Ingo any clue?
It's back to normal on 2.6.37-rc1 when reverting commit 50f2d7f682f9
("x86, numa: Assign CPUs to nodes in round-robin manner on fake NUMA").
The interesting part is, the commit was introduced in
2.6.36-rc7..2.6.36, however 2.6.36 boots OK, while 2.6.37-rc1 panics.
Thanks,
Fengguang
---
Here is the boot log for 2.6.37-rc1 and
2.6.37-rc1+revert-50f2d7f682f9.
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.001000] Fast TSC calibration using PIT
[ 0.002000] Detected 2666.944 MHz processor.
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.88 BogoMIPS (lpj=2666944)
[ 0.010803] pid_max: default: 32768 minimum: 301
[ 0.018268] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028595] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036480] Mount-cache hash table entries: 256
[ 0.041352] Initializing cgroup subsys debug
[ 0.045726] Initializing cgroup subsys ns
[ 0.049827] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.058842] Initializing cgroup subsys cpuacct
[ 0.063380] Initializing cgroup subsys memory
[ 0.067858] Initializing cgroup subsys devices
[ 0.072392] Initializing cgroup subsys freezer
[ 0.076962] CPU: Physical Processor ID: 0
[ 0.081060] CPU: Processor Core ID: 0
[ 0.084814] mce: CPU supports 9 MCE banks
[ 0.088929] CPU0: Thermal monitoring enabled (TM1)
[ 0.093821] using mwait in idle threads.
[ 0.097838] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.105200] ... version: 3
[ 0.109299] ... bit width: 48
[ 0.113484] ... generic registers: 4
[ 0.117582] ... value mask: 0000ffffffffffff
[ 0.122978] ... max period: 000000007fffffff
[ 0.128372] ... fixed-purpose events: 3
[ 0.132466] ... event mask: 000000070000000f
[ 0.138858] ACPI: Core revision 20101013
[ 0.162577] ftrace: allocating 24175 entries in 95 pages
[ 0.177764] Setting APIC routing to flat
[ 0.182283] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.198348] CPU0: Genuine Intel(R) CPU 000 @ 2.67GHz stepping 04
[ 0.312090] lockdep: fixing up alternatives.
[ 0.317093] Booting Node 0, Processors #1lockdep: fixing up alternatives.
[ 0.416923] #2lockdep: fixing up alternatives.
[ 0.513685] #3lockdep: fixing up alternatives.
[ 0.610397] #4lockdep: fixing up alternatives.
[ 0.707147] Ok.
[ 0.709075] Booting Node 1, Processors #5lockdep: fixing up alternatives.
[ 0.808884] Ok.
[ 0.810815] Booting Node 0, Processors #6lockdep: fixing up alternatives.
[ 0.910610] Ok.
[ 0.912540] Booting Node 1, Processors #7 Ok.
[ 1.007299] Brought up 8 CPUs
[ 1.010357] Total of 8 processors activated (42661.82 BogoMIPS).
[ 1.016489] Testing NMI watchdog ... OK.
[ 1.044458] CPU0 attaching sched-domain:
[ 1.048473] domain 0: span 0-3 level MC
[ 1.052528] groups: 0 1 2 3
[ 1.055786] domain 1: span 0-4,6 level CPU
[ 1.060184] groups: 0-3 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.066832] ERROR: repeated CPUs
[ 1.070147]
[ 1.071736] ERROR: groups don't span domain->span
[ 1.076522] domain 2: span 0-7 level NODE
[ 1.080924] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.087842] CPU1 attaching sched-domain:
[ 1.091859] domain 0: span 0-3 level MC
[ 1.095904] groups: 1 2 3 0
[ 1.099168] domain 1: span 0-4,6 level CPU
[ 1.103574] groups: 0-3 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.110236] ERROR: repeated CPUs
[ 1.113550]
[ 1.115134] ERROR: groups don't span domain->span
[ 1.119925] domain 2: span 0-7 level NODE
[ 1.124331] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.131252] CPU2 attaching sched-domain:
[ 1.135256] domain 0: span 0-3 level MC
[ 1.139313] groups: 2 3 0 1
[ 1.142566] domain 1: span 0-4,6 level CPU
[ 1.146965] groups: 0-3 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.153597] ERROR: repeated CPUs
[ 1.156910]
[ 1.158493] ERROR: groups don't span domain->span
[ 1.163283] domain 2: span 0-7 level NODE
[ 1.167688] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.174586] CPU3 attaching sched-domain:
[ 1.178593] domain 0: span 0-3 level MC
[ 1.182651] groups: 3 0 1 2
[ 1.185905] domain 1: span 0-4,6 level CPU
[ 1.190308] groups: 0-3 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.196965] ERROR: repeated CPUs
[ 1.200277]
[ 1.201857] ERROR: groups don't span domain->span
[ 1.206647] domain 2: span 0-7 level NODE
[ 1.211045] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.217955] CPU4 attaching sched-domain:
[ 1.221960] domain 0: span 4-7 level MC
[ 1.226018] groups: 4 5 6 7
[ 1.229261] ERROR: parent span is not a superset of domain->span
[ 1.235346] domain 1: span 0-4,6 level CPU
[ 1.239745] ERROR: domain->groups does not contain CPU4
[ 1.245052] groups: 5,7 (cpu_power = 4096)
[ 1.249623] ERROR: groups don't span domain->span
[ 1.254413] domain 2: span 0-7 level NODE
[ 1.258816] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.265730] CPU5 attaching sched-domain:
[ 1.269737] domain 0: span 4-7 level MC
[ 1.273786] groups: 5 6 7 4
[ 1.277038] ERROR: parent span is not a superset of domain->span
[ 1.283126] domain 1: span 5,7 level CPU
[ 1.287362] groups: 5,7 (cpu_power = 4096)
[ 1.291933] domain 2: span 0-7 level NODE
[ 1.296335] groups: 5,7 (cpu_power = 4096) 0-4,6 (cpu_power = 4096)
[ 1.304845] CPU6 attaching sched-domain:
[ 1.308855] domain 0: span 4-7 level MC
[ 1.312913] groups: 6 7 4 5
[ 1.316162] ERROR: parent span is not a superset of domain->span
[ 1.322252] domain 1: span 0-4,6 level CPU
[ 1.326661] ERROR: domain->groups does not contain CPU6
[ 1.331972] groups: 5,7 (cpu_power = 4096)
[ 1.336560] ERROR: groups don't span domain->span
[ 1.341352] domain 2: span 0-7 level NODE
[ 1.345755] groups: 0-4,6 (cpu_power = 4096) 5,7 (cpu_power = 4096)
[ 1.352664] CPU7 attaching sched-domain:
[ 1.356679] domain 0: span 4-7 level MC
[ 1.360736] groups: 7 4 5 6
[ 1.363976] ERROR: parent span is not a superset of domain->span
[ 1.370064] domain 1: span 5,7 level CPU
[ 1.374295] groups: 5,7 (cpu_power = 4096)
[ 1.378861] domain 2: span 0-7 level NODE
[ 1.383260] groups: 5,7 (cpu_power = 4096) 0-4,6 (cpu_power = 4096)
[ 6.527397] BUG: NMI Watchdog detected LOCKUP on CPU0, ip ffffffff8136b420, registers:
[ 6.535490] CPU 0
[ 6.537345] Modules linked in:
[ 6.540795]
[ 6.542371] Pid: 1, comm: swapper Tainted: G W 2.6.37-rc1 #108 X8DTN/X8DTN
[ 6.550167] RIP: 0010:[<ffffffff8136b420>] [<ffffffff8136b420>] find_next_bit+0x90/0x180
[ 6.558520] RSP: 0018:ffff8801b966d830 EFLAGS: 00000006
[ 6.563914] RAX: 0000000000000080 RBX: ffffffff821b1860 RCX: 0000000000000003
[ 6.571124] RDX: 0000000000000001 RSI: ffffffffffffffff RDI: 0000000000000008
[ 6.578335] RBP: ffff8801b966d830 R08: ffff8800bac0e410 R09: 0000000000000000
[ 6.585544] R10: 0000000000000003 R11: 0000000000000000 R12: ffff8800bac0e410
[ 6.592753] R13: ffff8800ba40de48 R14: 00000000001d2d00 R15: 0000000000000005
[ 6.599966] FS: 0000000000000000(0000) GS:ffff8800ba400000(0000) knlGS:0000000000000000
[ 6.608190] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 6.614016] CR2: 0000000000000000 CR3: 0000000001ee1000 CR4: 00000000000006f0
[ 6.621228] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.628438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6.635647] Process swapper (pid: 1, threadinfo ffff8801b966c000, task ffff8800b3778000)
[ 6.643877] Stack:
[ 6.645976] ffff8801b966d860 ffffffff8136ab33 0000000000000000 ffff8801b966daec
[ 6.653682] 00000000001d2d00 ffff8800ba40de48 ffff8801b966da30 ffffffff810a994d
[ 6.661366] ffff8801b966d890 ffff8801b966d9d0 0000000000000005 ffff8801bfbd2d00
[ 6.669052] Call Trace:
[ 6.671584] [<ffffffff8136ab33>] cpumask_next_and+0x73/0x90
[ 6.677323] [<ffffffff810a994d>] find_busiest_group+0x2ed/0x1480
[ 6.683495] [<ffffffff810929ed>] ? __phys_addr+0x5d/0x120
[ 6.689062] [<ffffffff810b2614>] load_balance+0xe4/0xcb0
[ 6.694541] [<ffffffff810b0b54>] ? dequeue_task_fair+0x1f4/0x250
[ 6.700715] [<ffffffff8199be1d>] schedule+0xb0d/0x14b0
[ 6.706020] [<ffffffff810cc60e>] ? __sysctl_head_next+0x19e/0x1a0
[ 6.712283] [<ffffffff8199d29d>] schedule_timeout+0x50d/0x570
[ 6.718192] [<ffffffff8110b9bc>] ? print_lock_contention_bug+0x2c/0x110
[ 6.724973] [<ffffffff810af7a1>] ? get_parent_ip+0x11/0x90
[ 6.730621] [<ffffffff819a7c7d>] ? sub_preempt_count+0x12d/0x1f0
[ 6.736795] [<ffffffff8199b0cb>] wait_for_common+0x16b/0x290
[ 6.742621] [<ffffffff810b4950>] ? default_wake_function+0x0/0x20
[ 6.748886] [<ffffffff8199b30d>] wait_for_completion+0x1d/0x20
[ 6.754894] [<ffffffff810efdfb>] kthread_create+0x9b/0x150
[ 6.760549] [<ffffffff810e8310>] ? rescuer_thread+0x0/0x2a0
[ 6.766291] [<ffffffff81202078>] ? __kmalloc_node+0x2b8/0x340
[ 6.772203] [<ffffffff810e7d5a>] __alloc_workqueue_key+0x27a/0x830
[ 6.778550] [<ffffffff8263b23f>] cpuset_init_smp+0x56/0x8c
[ 6.784202] [<ffffffff8261d148>] kernel_init+0x17a/0x27c
[ 6.789680] [<ffffffff81051a24>] kernel_thread_helper+0x4/0x10
[ 6.795680] [<ffffffff819a2bd4>] ? restore_args+0x0/0x30
[ 6.801159] [<ffffffff8261cfce>] ? kernel_init+0x0/0x27c
[ 6.806640] [<ffffffff81051a20>] ? kernel_thread_helper+0x0/0x10
[ 6.812812] Code: ff 89 d1 48 89 f0 48 d3 e0 48 89 c2 49 8b 00 48 21 d0 31 d2 48 83 ff 3f 0f 96 c2 48 63 ca 48 83 c1 02 48 83 04 cd 88 20 1b 82 01 <85> d2 0f 85 d0 00 00 00 31 d2 48 85 c0 0f 95 c2 48 63 ca 48 83
[ 6.834439] ---[ end trace 4eaa2a86a8e2da23 ]---
[ 6.839140] Kernel panic - not syncing: Non maskable interrupt
[ 6.845052] Pid: 1, comm: swapper Tainted: G D W 2.6.37-rc1 #108
[ 6.851738] Call Trace:
[ 6.854270] <NMI> [<ffffffff8136b420>] ? find_next_bit+0x90/0x180
[ 6.860658] [<ffffffff8199ac70>] panic+0xb1/0x222
[ 6.865533] [<ffffffff8136b420>] ? find_next_bit+0x90/0x180
[ 6.871274] [<ffffffff819a43c3>] die_nmi+0x153/0x180
[ 6.876409] [<ffffffff819a5009>] nmi_watchdog_tick+0x219/0x270
[ 6.882411] [<ffffffff819a38ba>] do_nmi+0x2fa/0x490
[ 6.887455] [<ffffffff819a3130>] nmi+0x20/0x39
[ 6.892074] [<ffffffff8136b420>] ? find_next_bit+0x90/0x180
[ 6.897813] <<EOE>> [<ffffffff8136ab33>] cpumask_next_and+0x73/0x90
[ 6.904372] [<ffffffff810a994d>] find_busiest_group+0x2ed/0x1480
[ 6.910548] [<ffffffff810929ed>] ? __phys_addr+0x5d/0x120
[ 6.916115] [<ffffffff810b2614>] load_balance+0xe4/0xcb0
[ 6.921595] [<ffffffff810b0b54>] ? dequeue_task_fair+0x1f4/0x250
[ 6.927769] [<ffffffff8199be1d>] schedule+0xb0d/0x14b0
[ 6.933077] [<ffffffff810cc60e>] ? __sysctl_head_next+0x19e/0x1a0
[ 6.939336] [<ffffffff8199d29d>] schedule_timeout+0x50d/0x570
[ 6.945247] [<ffffffff8110b9bc>] ? print_lock_contention_bug+0x2c/0x110
[ 6.952027] [<ffffffff810af7a1>] ? get_parent_ip+0x11/0x90
[ 6.957675] [<ffffffff819a7c7d>] ? sub_preempt_count+0x12d/0x1f0
[ 6.963850] [<ffffffff8199b0cb>] wait_for_common+0x16b/0x290
[ 6.969676] [<ffffffff810b4950>] ? default_wake_function+0x0/0x20
[ 6.975934] [<ffffffff8199b30d>] wait_for_completion+0x1d/0x20
[ 6.981935] [<ffffffff810efdfb>] kthread_create+0x9b/0x150
[ 6.987585] [<ffffffff810e8310>] ? rescuer_thread+0x0/0x2a0
[ 6.993326] [<ffffffff81202078>] ? __kmalloc_node+0x2b8/0x340
[ 6.999239] [<ffffffff810e7d5a>] __alloc_workqueue_key+0x27a/0x830
[ 7.005586] [<ffffffff8263b23f>] cpuset_init_smp+0x56/0x8c
[ 7.011236] [<ffffffff8261d148>] kernel_init+0x17a/0x27c
[ 7.016717] [<ffffffff81051a24>] kernel_thread_helper+0x4/0x10
[ 7.022717] [<ffffffff819a2bd4>] ? restore_args+0x0/0x30
[ 7.028197] [<ffffffff8261cfce>] ? kernel_init+0x0/0x27c
[ 7.033676] [<ffffffff81051a20>] ? kernel_thread_helper+0x0/0x10
[ 8.131629] Rebooting in 10 seconds..
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.37-rc1+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #107 SMP PREEMPT Sat Nov 13 15:43:33 CST 2010
[ 0.000000] Command line: ip=::::wfg-ne02::dhcp netconsole=@:/eth0,6666@...239.51.110/00:30:48:fe:19:94 panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=tty0 console=ttyS0,115200 earlyprintk=vga bisect-reboot sched_debug nfsroot=10.239.51.240:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf341000 (usable)
[ 0.000000] BIOS-e820: 00000000bf341000 - 00000000bf3c2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3c2000 - 00000000bf3c3000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf3c3000 - 00000000bf3d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf3d4000 - 00000000bf3d5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3d5000 - 00000000bf3e6000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf3e6000 - 00000000bf3e9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3e9000 - 00000000bf447000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf447000 - 00000000bf452000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf452000 - 00000000bf45d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf45d000 - 00000000bf47b000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf47b000 - 00000000bf67e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf67e000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] bootconsole [earlyvga0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: X8DTN/X8DTN, BIOS 4.6.3 03/05/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FE00000000 write-back
[ 0.000000] 1 base 01C0000000 mask FFC0000000 uncachable
[ 0.000000] 2 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fdf20] fdf20
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 4k
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fa00000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 4k
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ be539000-bf341000
[ 0.000000] ACPI: RSDP 00000000000f03f0 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bf450e18 0007C (v01 ALASKA A M I 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000bf44fd98 000F4 (v04 ALASKA A M I 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xBF459F40/0x00000000BF45AE40, using 32 (20101013/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000bf448018 069B4 (v01 ALASKA A M I 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bf459f40 00040
[ 0.000000] ACPI: APIC 00000000bf44fc18 000E4 (v02 ALASKA A M I 06222004 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000bf451f18 0003C (v01 A M I OEMMCFG 06222004 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf447c18 003B0 (v01 A M I AMI SRAT 00000000 AMI. 00000000)
[ 0.000000] ACPI: SLIT 00000000bf451e98 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
[ 0.000000] ACPI: HPET 00000000bf451e18 00038 (v01 A M I ICH7HPET 06222004 AMI. 00000003)
[ 0.000000] ACPI: EINJ 00000000bf44fa98 00130 (v01 AMI AMI EINJ 00000000 00000000)
[ 0.000000] ACPI: ERST 00000000bf3c2c98 00210 (v01 AMIER AMI ERST 00000000 00000000)
[ 0.000000] ACPI: HEST 00000000bf3c2f18 000A8 (v01 AMI AMI HEST 00000000 00000000)
[ 0.000000] ACPI: BERT 00000000bf451d98 00030 (v01 AMI AMI BERT 00000000 00000000)
[ 0.000000] ACPI: DMAR 00000000bf450d18 000C0 (v01 A M I OEMDMAR 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.000000] ACPI: [SRAT:0x00] ignored 8 entries of 16 found
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 1 PXM 1 100000000-1c0000000
[ 0.000000] NUMA: Using 32 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-00000000c0000000
[ 0.000000] NODE_DATA [00000000bf33c000 - 00000000bf340fff]
[ 0.000000] Initmem setup node 1 0000000100000000-00000001c0000000
[ 0.000000] NODE_DATA [00000001bfffa000 - 00000001bfffefff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bb000000-ffff8800bd9fffff] on node 0
[ 0.000000] [ffffea0003800000-ffffea00061fffff] PMD -> [ffff8801bce00000-ffff8801bf7fffff] on node 1
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bf341
[ 0.000000] 0: 0x000bf67e -> 0x000bf800
[ 0.000000] 1: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 783440
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10668 pages used for memmap
[ 0.000000] DMA32 zone: 768791 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 786432
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 8/0x1 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x03] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 9/0x3 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x05] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 10/0x5 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x07] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 11/0x7 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x11] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 12/0x11 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 13/0x13 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 14/0x15 ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x17] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 8 reached. Processor 15/0x17 ignored.
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec02000] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 3, version 32, address 0xfec02000, GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 88
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 475 pages/cpu @ffff8800ba400000 s1915520 r8192 d21888 u2097152
[ 0.000000] pcpu-alloc: s1915520 r8192 d21888 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 6 [1] 5 [1] 7
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1548390
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ip=::::wfg-ne02::dhcp netconsole=@:/eth0,6666@...239.51.110/00:30:48:fe:19:94 panic=10 hung_task_panic=1 softlockup_panic=1 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=tty0 console=ttyS0,115200 earlyprintk=vga bisect-reboot sched_debug nfsroot=10.239.51.240:/nfsroot/wfg,tcp,v3,rsize=524288,wsize=524288 rw BOOT_IMAGE=x86_64/vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 6064376k/7340032k available (9918k kernel code, 1060544k absent, 215112k reserved, 10845k data, 2720k init)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/wfg/cc/linux-2.6/kernel/lockdep.c:2481 lockdep_trace_alloc+0xed/0x100()
[ 0.000000] Hardware name: X8DTN
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.37-rc1+ #107
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810bc51d>] warn_slowpath_common+0xad/0xf0
[ 0.000000] [<ffffffff810bc57a>] warn_slowpath_null+0x1a/0x20
[ 0.000000] [<ffffffff8110debd>] lockdep_trace_alloc+0xed/0x100
[ 0.000000] [<ffffffff81201df0>] __kmalloc_node+0x30/0x340
[ 0.000000] [<ffffffff8110abf8>] ? lock_release_holdtime+0xb8/0x160
[ 0.000000] [<ffffffff811d0b5a>] pcpu_mem_alloc+0x16a/0x1b0
[ 0.000000] [<ffffffff82641c0b>] percpu_init_late+0x48/0xc2
[ 0.000000] [<ffffffff8261cd2f>] start_kernel+0x1d4/0x473
[ 0.000000] [<ffffffff8261c35c>] x86_64_start_reservations+0x163/0x167
[ 0.000000] [<ffffffff8261c498>] x86_64_start_kernel+0x138/0x147
[ 0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:1560 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 15 of 15 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.001000] Fast TSC calibration using PIT
[ 0.002000] Detected 2666.698 MHz processor.
[ 0.000009] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.39 BogoMIPS (lpj=2666698)
[ 0.010802] pid_max: default: 32768 minimum: 301
[ 0.018237] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028510] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036412] Mount-cache hash table entries: 256
[ 0.041291] Initializing cgroup subsys debug
[ 0.045654] Initializing cgroup subsys ns
[ 0.049758] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.058780] Initializing cgroup subsys cpuacct
[ 0.063318] Initializing cgroup subsys memory
[ 0.067796] Initializing cgroup subsys devices
[ 0.072332] Initializing cgroup subsys freezer
[ 0.076901] CPU: Physical Processor ID: 0
[ 0.080999] CPU: Processor Core ID: 0
[ 0.084751] mce: CPU supports 9 MCE banks
[ 0.088867] CPU0: Thermal monitoring enabled (TM1)
[ 0.093758] using mwait in idle threads.
[ 0.097768] Performance Events: PEBS fmt1+, Nehalem events, Intel PMU driver.
[ 0.105129] ... version: 3
[ 0.109229] ... bit width: 48
[ 0.113414] ... generic registers: 4
[ 0.117511] ... value mask: 0000ffffffffffff
[ 0.122907] ... max period: 000000007fffffff
[ 0.128301] ... fixed-purpose events: 3
[ 0.132397] ... event mask: 000000070000000f
[ 0.138788] ACPI: Core revision 20101013
[ 0.162590] ftrace: allocating 24175 entries in 95 pages
[ 0.177775] Setting APIC routing to flat
[ 0.182300] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.198364] CPU0: Genuine Intel(R) CPU 000 @ 2.67GHz stepping 04
[ 0.312090] lockdep: fixing up alternatives.
[ 0.317093] Booting Node 0, Processors #1lockdep: fixing up alternatives.
[ 0.416922] #2lockdep: fixing up alternatives.
[ 0.513686] #3lockdep: fixing up alternatives.
[ 0.610396] #4lockdep: fixing up alternatives.
[ 0.707154] Ok.
[ 0.709083] Booting Node 1, Processors #5lockdep: fixing up alternatives.
[ 0.808881] Ok.
[ 0.810811] Booting Node 0, Processors #6lockdep: fixing up alternatives.
[ 0.910600] Ok.
[ 0.912534] Booting Node 1, Processors #7 Ok.
[ 1.007340] Brought up 8 CPUs
[ 1.010410] Total of 8 processors activated (42661.07 BogoMIPS).
[ 1.016551] Testing NMI watchdog ... OK.
[ 1.044445] CPU0 attaching sched-domain:
[ 1.048472] domain 0: span 0-3 level MC
[ 1.052526] groups: 0 1 2 3
[ 1.055773] domain 1: span 0-7 level CPU
[ 1.060004] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 1.066650] domain 2: span 0-7 level NODE
[ 1.071053] groups: 0-7 (cpu_power = 8192)
[ 1.075721] CPU1 attaching sched-domain:
[ 1.079734] domain 0: span 0-3 level MC
[ 1.083793] groups: 1 2 3 0
[ 1.087055] domain 1: span 0-7 level CPU
[ 1.091285] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 1.097946] domain 2: span 0-7 level NODE
[ 1.102350] groups: 0-7 (cpu_power = 8192)
[ 1.107017] CPU2 attaching sched-domain:
[ 1.111027] domain 0: span 0-3 level MC
[ 1.115083] groups: 2 3 0 1
[ 1.118342] domain 1: span 0-7 level CPU
[ 1.122576] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 1.129236] domain 2: span 0-7 level NODE
[ 1.133637] groups: 0-7 (cpu_power = 8192)
[ 1.138287] CPU3 attaching sched-domain:
[ 1.142291] domain 0: span 0-3 level MC
[ 1.146351] groups: 3 0 1 2
[ 1.149620] domain 1: span 0-7 level CPU
[ 1.153847] groups: 0-3 (cpu_power = 4096) 4-7 (cpu_power = 4096)
[ 1.160478] domain 2: span 0-7 level NODE
[ 1.164875] groups: 0-7 (cpu_power = 8192)
[ 1.169528] CPU4 attaching sched-domain:
[ 1.173536] domain 0: span 4-7 level MC
[ 1.177598] groups: 4 5 6 7
[ 1.180855] domain 1: span 0-7 level CPU
[ 1.185085] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 1.191742] domain 2: span 0-7 level NODE
[ 1.196141] groups: 0-7 (cpu_power = 8192)
[ 1.200802] CPU5 attaching sched-domain:
[ 1.204810] domain 0: span 4-7 level MC
[ 1.208866] groups: 5 6 7 4
[ 1.212127] domain 1: span 0-7 level CPU
[ 1.216344] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 1.222994] domain 2: span 0-7 level NODE
[ 1.227390] groups: 0-7 (cpu_power = 8192)
[ 1.232046] CPU6 attaching sched-domain:
[ 1.236048] domain 0: span 4-7 level MC
[ 1.240101] groups: 6 7 4 5
[ 1.243351] domain 1: span 0-7 level CPU
[ 1.247578] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 1.254234] domain 2: span 0-7 level NODE
[ 1.258641] groups: 0-7 (cpu_power = 8192)
[ 1.263295] CPU7 attaching sched-domain:
[ 1.267301] domain 0: span 4-7 level MC
[ 1.271358] groups: 7 4 5 6
[ 1.274612] domain 1: span 0-7 level CPU
[ 1.278846] groups: 4-7 (cpu_power = 4096) 0-3 (cpu_power = 4096)
[ 1.285512] domain 2: span 0-7 level NODE
[ 1.289918] groups: 0-7 (cpu_power = 8192)
[ 1.295424] kworker/u:0 used greatest stack depth: 6256 bytes left
[ 1.302280] kworker/u:0 used greatest stack depth: 6184 bytes left
[ 1.317245] Time: 15:51:42 Date: 11/13/10
[ 1.321521] NET: Registered protocol family 16
[ 1.327993] ACPI: bus type pci registered
[ 1.332658] dca service started, version 1.12.1
[ 1.337487] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
[ 1.346935] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[ 1.427371] PCI: Using configuration type 1 for base access
[ 1.484975] ACPI: EC: Look up EC in DSDT
[ 1.491094] \_SB_:_OSC evaluation returned wrong type
[ 1.496235] _OSC request data:1 6
[ 1.504473] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.543125] ACPI: SSDT 00000000bf453018 01054 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.555525] ACPI: Dynamic OEM Table Load:
[ 1.559708] ACPI: SSDT (null) 01054 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.575161] ACPI: Interpreter enabled
[ 1.578917] ACPI: (supports S0 S5)
[ 1.582520] ACPI: Using IOAPIC for interrupt routing
[ 1.593032] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.646988] ACPI: No dock devices found.
[ 1.651004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.661221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.668265] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.674964] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.681660] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.689118] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 1.696583] pci 0000:00:00.0: [8086:3400] type 0 class 0x000600
[ 1.702642] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.708824] pci 0000:00:00.0: PME# disabled
[ 1.713132] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 1.719196] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.725373] pci 0000:00:01.0: PME# disabled
[ 1.729669] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
[ 1.735731] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.741920] pci 0000:00:02.0: PME# disabled
[ 1.746219] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 1.752279] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 1.758457] pci 0000:00:03.0: PME# disabled
[ 1.762755] pci 0000:00:04.0: [8086:340b] type 1 class 0x000604
[ 1.768822] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.775005] pci 0000:00:04.0: PME# disabled
[ 1.779303] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604
[ 1.785363] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.791539] pci 0000:00:05.0: PME# disabled
[ 1.795835] pci 0000:00:06.0: [8086:340d] type 1 class 0x000604
[ 1.801897] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 1.808081] pci 0000:00:06.0: PME# disabled
[ 1.812376] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 1.818434] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.824615] pci 0000:00:07.0: PME# disabled
[ 1.828908] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604
[ 1.834977] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 1.841162] pci 0000:00:08.0: PME# disabled
[ 1.845459] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
[ 1.851517] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 1.857694] pci 0000:00:09.0: PME# disabled
[ 1.861989] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604
[ 1.868058] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.874241] pci 0000:00:0a.0: PME# disabled
[ 1.878545] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 1.884565] pci 0000:00:13.0: reg 10: [mem 0xfbf03000-0xfbf03fff]
[ 1.890793] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 1.896971] pci 0000:00:13.0: PME# disabled
[ 1.901261] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 1.907348] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 1.913434] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 1.919518] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[ 1.925598] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880
[ 1.931613] pci 0000:00:16.0: reg 10: [mem 0xfffff1c000-0xfffff1ffff 64bit]
[ 1.938735] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880
[ 1.944753] pci 0000:00:16.1: reg 10: [mem 0xfffff18000-0xfffff1bfff 64bit]
[ 1.951874] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880
[ 1.957893] pci 0000:00:16.2: reg 10: [mem 0xfffff14000-0xfffff17fff 64bit]
[ 1.965014] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880
[ 1.971031] pci 0000:00:16.3: reg 10: [mem 0xfffff10000-0xfffff13fff 64bit]
[ 1.978153] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880
[ 1.984182] pci 0000:00:16.4: reg 10: [mem 0xfffff0c000-0xfffff0ffff 64bit]
[ 1.991332] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880
[ 1.997358] pci 0000:00:16.5: reg 10: [mem 0xfffff08000-0xfffff0bfff 64bit]
[ 2.004477] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880
[ 2.010496] pci 0000:00:16.6: reg 10: [mem 0xfffff04000-0xfffff07fff 64bit]
[ 2.017618] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880
[ 2.023636] pci 0000:00:16.7: reg 10: [mem 0xfffff00000-0xfffff03fff 64bit]
[ 2.030761] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 2.036815] pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df]
[ 2.042374] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 2.048432] pci 0000:00:1a.2: reg 20: [io 0xf0a0-0xf0bf]
[ 2.053987] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 2.060012] pci 0000:00:1a.7: reg 10: [mem 0xfbf02000-0xfbf023ff]
[ 2.066271] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 2.072456] pci 0000:00:1a.7: PME# disabled
[ 2.076757] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 2.082826] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.089000] pci 0000:00:1c.0: PME# disabled
[ 2.093301] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 2.099377] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.105555] pci 0000:00:1c.4: PME# disabled
[ 2.109860] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 2.115920] pci 0000:00:1d.0: reg 20: [io 0xf080-0xf09f]
[ 2.121474] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 2.127535] pci 0000:00:1d.1: reg 20: [io 0xf060-0xf07f]
[ 2.133070] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 2.139124] pci 0000:00:1d.2: reg 20: [io 0xf040-0xf05f]
[ 2.144673] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 2.150704] pci 0000:00:1d.7: reg 10: [mem 0xfbf01000-0xfbf013ff]
[ 2.156970] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 2.163142] pci 0000:00:1d.7: PME# disabled
[ 2.167433] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 2.173522] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 2.179636] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 2.187710] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 2.194921] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0600 (mask 00ff)
[ 2.202646] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 001f)
[ 2.210357] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0ca0 (mask 000f)
[ 2.218116] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 2.224140] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 2.229633] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 2.235124] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 2.240628] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 2.246118] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 2.251608] pci 0000:00:1f.2: reg 24: [mem 0xfbf00000-0xfbf007ff]
[ 2.257823] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.263132] pci 0000:00:1f.2: PME# disabled
[ 2.267419] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 2.273436] pci 0000:00:1f.3: reg 10: [mem 0xfffff20000-0xfffff200ff 64bit]
[ 2.280506] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 2.286085] pci 0000:01:00.0: [8086:10c9] type 0 class 0x000200
[ 2.292107] pci 0000:01:00.0: reg 10: [mem 0xfb9a0000-0xfb9bffff]
[ 2.298291] pci 0000:01:00.0: reg 14: [mem 0xfb980000-0xfb99ffff]
[ 2.304476] pci 0000:01:00.0: reg 18: [io 0xe020-0xe03f]
[ 2.309966] pci 0000:01:00.0: reg 1c: [mem 0xfba44000-0xfba47fff]
[ 2.316167] pci 0000:01:00.0: reg 30: [mem 0xfb960000-0xfb97ffff pref]
[ 2.322816] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 2.328999] pci 0000:01:00.0: PME# disabled
[ 2.333314] pci 0000:01:00.1: [8086:10c9] type 0 class 0x000200
[ 2.339327] pci 0000:01:00.1: reg 10: [mem 0xfb940000-0xfb95ffff]
[ 2.345512] pci 0000:01:00.1: reg 14: [mem 0xfb920000-0xfb93ffff]
[ 2.351691] pci 0000:01:00.1: reg 18: [io 0xe000-0xe01f]
[ 2.357183] pci 0000:01:00.1: reg 1c: [mem 0xfba40000-0xfba43fff]
[ 2.363381] pci 0000:01:00.1: reg 30: [mem 0xfb900000-0xfb91ffff pref]
[ 2.370020] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 2.376203] pci 0000:01:00.1: PME# disabled
[ 2.380493] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 2.385806] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 2.391989] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbafffff]
[ 2.398872] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.407236] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 2.412550] pci 0000:00:02.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.419674] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.427568] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.436056] pci 0000:04:00.0: [8086:10f1] type 0 class 0x000200
[ 2.442140] pci 0000:04:00.0: reg 10: [mem 0xfbea0000-0xfbebffff]
[ 2.448387] pci 0000:04:00.0: reg 14: [mem 0xfbe40000-0xfbe7ffff]
[ 2.454636] pci 0000:04:00.0: reg 18: [io 0xd020-0xd03f]
[ 2.460193] pci 0000:04:00.0: reg 1c: [mem 0xfbec4000-0xfbec7fff]
[ 2.466491] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 2.472135] pci 0000:04:00.0: PME# disabled
[ 2.476502] pci 0000:04:00.1: [8086:10f1] type 0 class 0x000200
[ 2.482580] pci 0000:04:00.1: reg 10: [mem 0xfbe80000-0xfbe9ffff]
[ 2.488839] pci 0000:04:00.1: reg 14: [mem 0xfbe00000-0xfbe3ffff]
[ 2.495100] pci 0000:04:00.1: reg 18: [io 0xd000-0xd01f]
[ 2.500660] pci 0000:04:00.1: reg 1c: [mem 0xfbec0000-0xfbec3fff]
[ 2.506963] pci 0000:04:00.1: PME# supported from D0 D3hot
[ 2.512601] pci 0000:04:00.1: PME# disabled
[ 2.516954] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[ 2.522266] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 2.528450] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 2.535324] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.545273] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 2.550585] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.557719] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.565612] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.573980] pci 0000:00:05.0: PCI bridge to [bus 06-06]
[ 2.579294] pci 0000:00:05.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.586428] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.594327] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.602695] pci 0000:00:06.0: PCI bridge to [bus 07-07]
[ 2.608009] pci 0000:00:06.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.615137] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.623028] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.631409] pci 0000:00:07.0: PCI bridge to [bus 08-08]
[ 2.636716] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.643842] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.651735] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.660101] pci 0000:00:08.0: PCI bridge to [bus 09-09]
[ 2.665408] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.672533] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.680433] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.688823] pci 0000:0a:00.0: [8086:0329] type 1 class 0x000604
[ 2.694841] pci 0000:0a:00.0: PXH quirk detected; SHPC device MSI disabled
[ 2.701852] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
[ 2.708028] pci 0000:0a:00.0: PME# disabled
[ 2.712334] pci 0000:0a:00.2: [8086:032a] type 1 class 0x000604
[ 2.718376] pci 0000:0a:00.2: PXH quirk detected; SHPC device MSI disabled
[ 2.725409] pci 0000:0a:00.2: PME# supported from D0 D3hot D3cold
[ 2.731591] pci 0000:0a:00.2: PME# disabled
[ 2.735883] pci 0000:00:09.0: PCI bridge to [bus 0a-0c]
[ 2.741192] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 2.747368] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.754242] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.762650] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
[ 2.767967] pci 0000:0a:00.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.775102] pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.782992] pci 0000:0a:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.791373] pci 0000:0c:01.0: [8086:1229] type 0 class 0x000200
[ 2.797391] pci 0000:0c:01.0: reg 10: [mem 0xfbd20000-0xfbd20fff]
[ 2.803580] pci 0000:0c:01.0: reg 14: [io 0xc000-0xc03f]
[ 2.809068] pci 0000:0c:01.0: reg 18: [mem 0xfbd00000-0xfbd1ffff]
[ 2.815296] pci 0000:0c:01.0: supports D1 D2
[ 2.819656] pci 0000:0c:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.826352] pci 0000:0c:01.0: PME# disabled
[ 2.830678] pci 0000:0a:00.2: PCI bridge to [bus 0c-0c]
[ 2.835987] pci 0000:0a:00.2: bridge window [io 0xc000-0xcfff]
[ 2.842160] pci 0000:0a:00.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 2.849027] pci 0000:0a:00.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.857403] pci 0000:00:0a.0: PCI bridge to [bus 0d-0d]
[ 2.862719] pci 0000:00:0a.0: bridge window [io 0xf000-0x0000] (disabled)
[ 2.869851] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 2.877751] pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.886138] pci 0000:0e:00.0: [1000:0058] type 0 class 0x000100
[ 2.892157] pci 0000:0e:00.0: reg 10: [io 0xb000-0xb0ff]
[ 2.897659] pci 0000:0e:00.0: reg 14: [mem 0xfb810000-0xfb813fff 64bit]
[ 2.904371] pci 0000:0e:00.0: reg 1c: [mem 0xfb800000-0xfb80ffff 64bit]
[ 2.911085] pci 0000:0e:00.0: reg 30: [mem 0xfb600000-0xfb7fffff pref]
[ 2.917730] pci 0000:0e:00.0: supports D1 D2
[ 2.922107] pci 0000:00:1c.0: PCI bridge to [bus 0e-0e]
[ 2.927420] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 2.933596] pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb8fffff]
[ 2.940471] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 2.948865] pci 0000:0f:00.0: [197b:2368] type 0 class 0x000101
[ 2.954888] pci 0000:0f:00.0: reg 10: [io 0xa040-0xa047]
[ 2.960387] pci 0000:0f:00.0: reg 14: [io 0xa030-0xa033]
[ 2.965885] pci 0000:0f:00.0: reg 18: [io 0xa020-0xa027]
[ 2.971381] pci 0000:0f:00.0: reg 1c: [io 0xa010-0xa013]
[ 2.976880] pci 0000:0f:00.0: reg 20: [io 0xa000-0xa00f]
[ 2.982391] pci 0000:0f:00.0: reg 30: [mem 0xfbc00000-0xfbc0ffff pref]
[ 2.989066] pci 0000:00:1c.4: PCI bridge to [bus 0f-0f]
[ 2.994381] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 3.000561] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 3.007440] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 3.015814] pci 0000:10:01.0: [1002:515e] type 0 class 0x000300
[ 3.021850] pci 0000:10:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 3.028465] pci 0000:10:01.0: reg 14: [io 0x9000-0x90ff]
[ 3.033964] pci 0000:10:01.0: reg 18: [mem 0xfbb20000-0xfbb2ffff]
[ 3.040183] pci 0000:10:01.0: reg 30: [mem 0xfbb00000-0xfbb1ffff pref]
[ 3.046816] pci 0000:10:01.0: supports D1 D2
[ 3.051227] pci 0000:00:1e.0: PCI bridge to [bus 10-10] (subtractive decode)
[ 3.058359] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
[ 3.064537] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 3.071405] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 3.079294] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 3.087359] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 3.095422] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 3.104174] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 3.113012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 3.120459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 3.127262] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 3.133891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 3.140599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9._PRT]
[ 3.147263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHB._PRT]
[ 3.154348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE9.PXHA._PRT]
[ 3.253743] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.261335] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 3.268924] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 3.276575] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.284137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 3.291941] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 3.299732] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[ 3.307508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 3.316098] vgaarb: device added: PCI:0000:10:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.324340] vgaarb: loaded
[ 3.328105] usbcore: registered new interface driver usbfs
[ 3.334051] usbcore: registered new interface driver hub
[ 3.339667] usbcore: registered new device driver usb
[ 3.346564] wmi: Mapper loaded
[ 3.349874] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 3.356312] PCI: Using ACPI for IRQ routing
[ 3.360578] PCI: pci_cache_line_size set to 64 bytes
[ 3.365722] pci 0000:00:16.0: no compatible bridge window for [mem 0xfffff1c000-0xfffff1ffff 64bit]
[ 3.374914] pci 0000:00:16.1: no compatible bridge window for [mem 0xfffff18000-0xfffff1bfff 64bit]
[ 3.384101] pci 0000:00:16.2: no compatible bridge window for [mem 0xfffff14000-0xfffff17fff 64bit]
[ 3.393289] pci 0000:00:16.3: no compatible bridge window for [mem 0xfffff10000-0xfffff13fff 64bit]
[ 3.402480] pci 0000:00:16.4: no compatible bridge window for [mem 0xfffff0c000-0xfffff0ffff 64bit]
[ 3.411669] pci 0000:00:16.5: no compatible bridge window for [mem 0xfffff08000-0xfffff0bfff 64bit]
[ 3.420871] pci 0000:00:16.6: no compatible bridge window for [mem 0xfffff04000-0xfffff07fff 64bit]
[ 3.430065] pci 0000:00:16.7: no compatible bridge window for [mem 0xfffff00000-0xfffff03fff 64bit]
[ 3.439297] pci 0000:00:1f.3: no compatible bridge window for [mem 0xfffff20000-0xfffff200ff 64bit]
[ 3.448741] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 3.454942] reserve RAM buffer: 00000000bf341000 - 00000000bfffffff
[ 3.461430] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 3.468870] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 3.476280] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 3.481716] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 3.496981] Switching to clocksource tsc
[ 3.501724] Warning: could not register all branches stats
[ 3.507305] Warning: could not register annotated branches stats
[ 3.547612] pnp: PnP ACPI init
[ 3.550794] ACPI: bus type pnp registered
[ 3.555137] pnp 00:00: [bus 00-ff]
[ 3.558632] pnp 00:00: [io 0x0cf8-0x0cff]
[ 3.562814] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 3.567603] pnp 00:00: [io 0x0d00-0xffff window]
[ 3.572391] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 3.577874] pnp 00:00: [mem 0x00000000 window]
[ 3.582401] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 3.588318] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 3.595734] pnp 00:01: [mem 0xfc000000-0xfcffffff]
[ 3.600614] pnp 00:01: [mem 0xfd000000-0xfdffffff]
[ 3.605498] pnp 00:01: [mem 0xfe000000-0xfe9fffff]
[ 3.610384] pnp 00:01: [mem 0xfea00000-0xfea0001f]
[ 3.615266] pnp 00:01: [mem 0xfeb00000-0xfebfffff]
[ 3.620150] pnp 00:01: [mem 0xfed00400-0xfed3ffff]
[ 3.625034] pnp 00:01: [mem 0xfed45000-0xfedfffff]
[ 3.631939] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.639872] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 3.645879] pnp 00:02: [io 0x0290-0x029f]
[ 3.650067] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 3.656077] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 3.662088] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 3.668552] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.675257] pnp 00:03: [io 0x0060]
[ 3.678844] pnp 00:03: [io 0x0064]
[ 3.682439] pnp 00:03: [irq 1]
[ 3.685911] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 3.693439] pnp 00:04: [irq 12]
[ 3.696978] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 3.706133] pnp 00:05: [io 0x03f8-0x03ff]
[ 3.710325] pnp 00:05: [irq 4]
[ 3.713471] pnp 00:05: [dma 0 disabled]
[ 3.717764] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.729668] pnp 00:06: [io 0x02f8-0x02ff]
[ 3.733864] pnp 00:06: [irq 3]
[ 3.737010] pnp 00:06: [dma 0 disabled]
[ 3.741311] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 3.750489] pnp 00:07: [dma 4]
[ 3.753643] pnp 00:07: [io 0x0000-0x000f]
[ 3.757829] pnp 00:07: [io 0x0081-0x0083]
[ 3.762019] pnp 00:07: [io 0x0087]
[ 3.765597] pnp 00:07: [io 0x0089-0x008b]
[ 3.769783] pnp 00:07: [io 0x008f]
[ 3.773363] pnp 00:07: [io 0x00c0-0x00df]
[ 3.777882] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 3.784538] pnp 00:08: [io 0x0070-0x0071]
[ 3.788728] pnp 00:08: [irq 8]
[ 3.792218] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.798859] pnp 00:09: [io 0x0061]
[ 3.802771] pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
[ 3.809456] pnp 00:0a: [io 0x0010-0x001f]
[ 3.813645] pnp 00:0a: [io 0x0022-0x003f]
[ 3.817837] pnp 00:0a: [io 0x0044-0x005f]
[ 3.822019] pnp 00:0a: [io 0x0062-0x0063]
[ 3.826224] pnp 00:0a: [io 0x0065-0x006f]
[ 3.830414] pnp 00:0a: [io 0x0072-0x007f]
[ 3.834597] pnp 00:0a: [io 0x0080]
[ 3.838180] pnp 00:0a: [io 0x0084-0x0086]
[ 3.842363] pnp 00:0a: [io 0x0088]
[ 3.845942] pnp 00:0a: [io 0x008c-0x008e]
[ 3.850126] pnp 00:0a: [io 0x0090-0x009f]
[ 3.854311] pnp 00:0a: [io 0x00a2-0x00bf]
[ 3.858495] pnp 00:0a: [io 0x00e0-0x00ef]
[ 3.862678] pnp 00:0a: [io 0x04d0-0x04d1]
[ 3.867459] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.874134] pnp 00:0b: [io 0x00f0-0x00ff]
[ 3.878327] pnp 00:0b: [irq 13]
[ 3.881899] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 3.889375] pnp 00:0c: [io 0x0400-0x047f]
[ 3.893564] pnp 00:0c: [io 0x1180-0x119f]
[ 3.897755] pnp 00:0c: [io 0x0500-0x057f]
[ 3.901947] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 3.906831] pnp 00:0c: [mem 0xfec00000-0xfecfffff]
[ 3.911719] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 3.916939] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.924229] pnp 00:0d: [mem 0xfed00000-0xfed003ff]
[ 3.929572] pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
[ 3.936868] pnp: PnP ACPI: found 14 devices
[ 3.941143] ACPI: ACPI bus type pnp unregistered
[ 3.945869] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 3.952577] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 3.959275] system 00:01: [mem 0xfe000000-0xfe9fffff] has been reserved
[ 3.965974] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
[ 3.972676] system 00:01: [mem 0xfeb00000-0xfebfffff] has been reserved
[ 3.979378] system 00:01: [mem 0xfed00400-0xfed3ffff] could not be reserved
[ 3.986421] system 00:01: [mem 0xfed45000-0xfedfffff] has been reserved
[ 3.993128] system 00:02: [io 0x0290-0x029f] has been reserved
[ 3.999138] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 4.005152] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 4.011151] system 00:0c: [io 0x1180-0x119f] has been reserved
[ 4.017152] system 00:0c: [io 0x0500-0x057f] could not be reserved
[ 4.023508] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 4.030207] system 00:0c: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 4.037251] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 4.074338] pci 0000:00:1c.0: BAR 9: assigned [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.082237] pci 0000:00:1c.4: BAR 9: assigned [mem 0xfb400000-0xfb5fffff 64bit pref]
[ 4.090134] pci 0000:00:16.0: BAR 0: assigned [mem 0xfed40000-0xfed43fff 64bit]
[ 4.097599] pci 0000:00:16.0: BAR 0: set to [mem 0xfed40000-0xfed43fff 64bit] (PCI address [0xfed40000-0xfed43fff])
[ 4.108183] pci 0000:00:16.1: BAR 0: assigned [mem 0xfed3c000-0xfed3ffff 64bit]
[ 4.115651] pci 0000:00:16.1: BAR 0: set to [mem 0xfed3c000-0xfed3ffff 64bit] (PCI address [0xfed3c000-0xfed3ffff])
[ 4.126231] pci 0000:00:16.2: BAR 0: assigned [mem 0xfed38000-0xfed3bfff 64bit]
[ 4.133694] pci 0000:00:16.2: BAR 0: set to [mem 0xfed38000-0xfed3bfff 64bit] (PCI address [0xfed38000-0xfed3bfff])
[ 4.144263] pci 0000:00:16.3: BAR 0: assigned [mem 0xfed34000-0xfed37fff 64bit]
[ 4.151719] pci 0000:00:16.3: BAR 0: set to [mem 0xfed34000-0xfed37fff 64bit] (PCI address [0xfed34000-0xfed37fff])
[ 4.162297] pci 0000:00:16.4: BAR 0: assigned [mem 0xfed30000-0xfed33fff 64bit]
[ 4.169751] pci 0000:00:16.4: BAR 0: set to [mem 0xfed30000-0xfed33fff 64bit] (PCI address [0xfed30000-0xfed33fff])
[ 4.180328] pci 0000:00:16.5: BAR 0: assigned [mem 0xfed2c000-0xfed2ffff 64bit]
[ 4.187786] pci 0000:00:16.5: BAR 0: set to [mem 0xfed2c000-0xfed2ffff 64bit] (PCI address [0xfed2c000-0xfed2ffff])
[ 4.198361] pci 0000:00:16.6: BAR 0: assigned [mem 0xfed28000-0xfed2bfff 64bit]
[ 4.205816] pci 0000:00:16.6: BAR 0: set to [mem 0xfed28000-0xfed2bfff 64bit] (PCI address [0xfed28000-0xfed2bfff])
[ 4.216394] pci 0000:00:16.7: BAR 0: assigned [mem 0xfed24000-0xfed27fff 64bit]
[ 4.223849] pci 0000:00:16.7: BAR 0: set to [mem 0xfed24000-0xfed27fff 64bit] (PCI address [0xfed24000-0xfed27fff])
[ 4.234426] pci 0000:00:1f.3: BAR 0: assigned [mem 0xfed44f00-0xfed44fff 64bit]
[ 4.241883] pci 0000:00:1f.3: BAR 0: set to [mem 0xfed44f00-0xfed44fff 64bit] (PCI address [0xfed44f00-0xfed44fff])
[ 4.252456] pci 0000:00:01.0: PCI bridge to [bus 01-02]
[ 4.257764] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 4.263941] pci 0000:00:01.0: bridge window [mem 0xfb900000-0xfbafffff]
[ 4.270813] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 4.276994] pci 0000:00:02.0: PCI bridge to [bus 03-03]
[ 4.282304] pci 0000:00:02.0: bridge window [io disabled]
[ 4.288047] pci 0000:00:02.0: bridge window [mem disabled]
[ 4.293788] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 4.299963] pci 0000:00:03.0: PCI bridge to [bus 04-04]
[ 4.305275] pci 0000:00:03.0: bridge window [io 0xd000-0xdfff]
[ 4.311454] pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 4.318324] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 4.324505] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 4.329814] pci 0000:00:04.0: bridge window [io disabled]
[ 4.335558] pci 0000:00:04.0: bridge window [mem disabled]
[ 4.341296] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 4.347473] pci 0000:00:05.0: PCI bridge to [bus 06-06]
[ 4.352782] pci 0000:00:05.0: bridge window [io disabled]
[ 4.358527] pci 0000:00:05.0: bridge window [mem disabled]
[ 4.364265] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 4.370442] pci 0000:00:06.0: PCI bridge to [bus 07-07]
[ 4.375751] pci 0000:00:06.0: bridge window [io disabled]
[ 4.381495] pci 0000:00:06.0: bridge window [mem disabled]
[ 4.387233] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 4.393408] pci 0000:00:07.0: PCI bridge to [bus 08-08]
[ 4.398720] pci 0000:00:07.0: bridge window [io disabled]
[ 4.404464] pci 0000:00:07.0: bridge window [mem disabled]
[ 4.410209] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 4.416386] pci 0000:00:08.0: PCI bridge to [bus 09-09]
[ 4.421698] pci 0000:00:08.0: bridge window [io disabled]
[ 4.427440] pci 0000:00:08.0: bridge window [mem disabled]
[ 4.433180] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 4.439353] pci 0000:0a:00.0: PCI bridge to [bus 0b-0b]
[ 4.444665] pci 0000:0a:00.0: bridge window [io disabled]
[ 4.450407] pci 0000:0a:00.0: bridge window [mem disabled]
[ 4.456147] pci 0000:0a:00.0: bridge window [mem pref disabled]
[ 4.462323] pci 0000:0a:00.2: PCI bridge to [bus 0c-0c]
[ 4.467635] pci 0000:0a:00.2: bridge window [io 0xc000-0xcfff]
[ 4.473809] pci 0000:0a:00.2: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 4.480674] pci 0000:0a:00.2: bridge window [mem pref disabled]
[ 4.486855] pci 0000:00:09.0: PCI bridge to [bus 0a-0c]
[ 4.492165] pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
[ 4.498341] pci 0000:00:09.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 4.505207] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 4.511390] pci 0000:00:0a.0: PCI bridge to [bus 0d-0d]
[ 4.516697] pci 0000:00:0a.0: bridge window [io disabled]
[ 4.522448] pci 0000:00:0a.0: bridge window [mem disabled]
[ 4.528189] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 4.534369] pci 0000:00:1c.0: PCI bridge to [bus 0e-0e]
[ 4.539676] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 4.545853] pci 0000:00:1c.0: bridge window [mem 0xfb600000-0xfb8fffff]
[ 4.552725] pci 0000:00:1c.0: bridge window [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.560619] pci 0000:00:1c.4: PCI bridge to [bus 0f-0f]
[ 4.565929] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
[ 4.572108] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 4.578978] pci 0000:00:1c.4: bridge window [mem 0xfb400000-0xfb5fffff 64bit pref]
[ 4.586871] pci 0000:00:1e.0: PCI bridge to [bus 10-10]
[ 4.592183] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
[ 4.599941] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 4.606812] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 4.614725] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.621509] pci 0000:00:01.0: setting latency timer to 64
[ 4.626999] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.633785] pci 0000:00:02.0: setting latency timer to 64
[ 4.639275] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.646058] pci 0000:00:03.0: setting latency timer to 64
[ 4.651550] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.658334] pci 0000:00:04.0: setting latency timer to 64
[ 4.663826] pci 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.670610] pci 0000:00:05.0: setting latency timer to 64
[ 4.676102] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.682885] pci 0000:00:06.0: setting latency timer to 64
[ 4.688376] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.695161] pci 0000:00:07.0: setting latency timer to 64
[ 4.700652] pci 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.707434] pci 0000:00:08.0: setting latency timer to 64
[ 4.712925] pci 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.719709] pci 0000:00:09.0: setting latency timer to 64
[ 4.725203] pci 0000:0a:00.0: setting latency timer to 64
[ 4.730691] pci 0000:0a:00.2: setting latency timer to 64
[ 4.736180] pci 0000:00:0a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.742963] pci 0000:00:0a.0: setting latency timer to 64
[ 4.748462] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.755247] pci 0000:00:1c.0: setting latency timer to 64
[ 4.760739] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.767522] pci 0000:00:1c.4: setting latency timer to 64
[ 4.773013] pci 0000:00:1e.0: setting latency timer to 64
[ 4.778498] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 4.784149] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 4.789802] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.796147] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 4.802493] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 4.808146] pci_bus 0000:01: resource 1 [mem 0xfb900000-0xfbafffff]
[ 4.814492] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 4.820143] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 4.826490] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 4.832143] pci_bus 0000:0a: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 4.838488] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff]
[ 4.844142] pci_bus 0000:0c: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 4.850486] pci_bus 0000:0e: resource 0 [io 0xb000-0xbfff]
[ 4.856139] pci_bus 0000:0e: resource 1 [mem 0xfb600000-0xfb8fffff]
[ 4.862485] pci_bus 0000:0e: resource 2 [mem 0xfee00000-0xfeffffff 64bit pref]
[ 4.869849] pci_bus 0000:0f: resource 0 [io 0xa000-0xafff]
[ 4.875503] pci_bus 0000:0f: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 4.881848] pci_bus 0000:0f: resource 2 [mem 0xfb400000-0xfb5fffff 64bit pref]
[ 4.889212] pci_bus 0000:10: resource 0 [io 0x9000-0x9fff]
[ 4.894865] pci_bus 0000:10: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 4.901212] pci_bus 0000:10: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 4.908576] pci_bus 0000:10: resource 4 [io 0x0000-0x0cf7]
[ 4.914230] pci_bus 0000:10: resource 5 [io 0x0d00-0xffff]
[ 4.919882] pci_bus 0000:10: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.926229] pci_bus 0000:10: resource 7 [mem 0xc0000000-0xffffffff]
[ 4.932613] NET: Registered protocol family 2
[ 4.937857] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 4.948731] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 4.959418] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes)
[ 4.968018] TCP: Hash tables configured (established 524288 bind 65536)
[ 4.974722] TCP reno registered
[ 4.978250] UDP hash table entries: 4096 (order: 7, 786432 bytes)
[ 4.984913] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes)
[ 4.991997] NET: Registered protocol family 1
[ 4.996963] RPC: Registered udp transport module.
[ 5.001766] RPC: Registered tcp transport module.
[ 5.006560] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.013180] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30
[ 5.019794] pci 0000:00:1a.0: Performing full reset
[ 5.024772] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 5.031381] pci 0000:00:1a.2: Performing full reset
[ 5.036416] pci 0000:00:1a.7: EHCI: BIOS handoff
[ 6.138220] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 6.145523] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1f30
[ 6.152136] pci 0000:00:1d.0: Performing full reset
[ 6.157115] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[ 6.163722] pci 0000:00:1d.1: Performing full reset
[ 6.168699] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[ 6.175306] pci 0000:00:1d.2: Performing full reset
[ 6.180326] pci 0000:00:1d.7: EHCI: BIOS handoff
[ 7.281248] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 7.288562] pci 0000:04:00.0: Disabling L0s
[ 7.292903] pci 0000:04:00.1: Disabling L0s
[ 7.297360] pci 0000:10:01.0: Boot video device
[ 7.301985] PCI: CLS 64 bytes, default 64
[ 7.306231] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 7.312756] Placing 64MB software IO TLB between ffff8800b6400000 - ffff8800ba400000
[ 7.320644] software IO TLB at phys 0xb6400000 - 0xba400000
[ 7.342342] Machine check injector initialized
[ 7.354261] microcode: CPU0 sig=0x106a4, pf=0x1, revision=0x7
[ 7.360108] microcode: CPU1 sig=0x106a4, pf=0x1, revision=0x7
[ 7.365946] microcode: CPU2 sig=0x106a4, pf=0x1, revision=0x7
[ 7.371784] microcode: CPU3 sig=0x106a4, pf=0x1, revision=0x7
[ 7.377629] microcode: CPU4 sig=0x106a4, pf=0x1, revision=0x7
[ 7.383473] microcode: CPU5 sig=0x106a4, pf=0x1, revision=0x7
[ 7.389325] microcode: CPU6 sig=0x106a4, pf=0x1, revision=0x7
[ 7.395168] microcode: CPU7 sig=0x106a4, pf=0x1, revision=0x7
[ 7.401232] microcode: Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba
[ 7.410166] Scanning for low memory corruption every 60 seconds
[ 7.419890] Initializing RT-Tester: OK
[ 7.423893] audit: initializing netlink socket (disabled)
[ 7.429412] type=2000 audit(1289663505.419:1): initialized
[ 7.443609] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 7.451474] Installing knfsd (copyright (C) 1996 okir@...ad.swb.de).
[ 7.461716] fuse init (API version 7.15)
[ 7.466113] msgmni has been set to 11844
[ 7.475102] pcieport 0000:00:01.0: ACPI _OSC control granted for 0x1c
[ 7.481645] pcieport 0000:00:01.0: setting latency timer to 64
[ 7.487629] pcieport 0000:00:01.0: irq 88 for MSI/MSI-X
[ 7.495372] pcieport 0000:00:02.0: ACPI _OSC control granted for 0x1c
[ 7.501914] pcieport 0000:00:02.0: setting latency timer to 64
[ 7.507877] pcieport 0000:00:02.0: irq 89 for MSI/MSI-X
[ 7.515446] pcieport 0000:00:03.0: ACPI _OSC control granted for 0x1c
[ 7.521988] pcieport 0000:00:03.0: setting latency timer to 64
[ 7.527949] pcieport 0000:00:03.0: irq 90 for MSI/MSI-X
[ 7.535820] pcieport 0000:00:04.0: ACPI _OSC control granted for 0x1c
[ 7.542362] pcieport 0000:00:04.0: setting latency timer to 64
[ 7.548325] pcieport 0000:00:04.0: irq 91 for MSI/MSI-X
[ 7.556268] pcieport 0000:00:05.0: ACPI _OSC control granted for 0x1c
[ 7.562807] pcieport 0000:00:05.0: setting latency timer to 64
[ 7.568769] pcieport 0000:00:05.0: irq 92 for MSI/MSI-X
[ 7.576314] pcieport 0000:00:06.0: ACPI _OSC control granted for 0x1c
[ 7.582854] pcieport 0000:00:06.0: setting latency timer to 64
[ 7.588814] pcieport 0000:00:06.0: irq 93 for MSI/MSI-X
[ 7.596595] pcieport 0000:00:07.0: ACPI _OSC control granted for 0x1c
[ 7.603131] pcieport 0000:00:07.0: setting latency timer to 64
[ 7.609094] pcieport 0000:00:07.0: irq 94 for MSI/MSI-X
[ 7.616908] pcieport 0000:00:08.0: ACPI _OSC control granted for 0x1c
[ 7.623452] pcieport 0000:00:08.0: setting latency timer to 64
[ 7.629427] pcieport 0000:00:08.0: irq 95 for MSI/MSI-X
[ 7.637440] pcieport 0000:00:09.0: ACPI _OSC control granted for 0x1c
[ 7.643979] pcieport 0000:00:09.0: setting latency timer to 64
[ 7.649939] pcieport 0000:00:09.0: irq 96 for MSI/MSI-X
[ 7.657878] pcieport 0000:00:0a.0: ACPI _OSC control granted for 0x1c
[ 7.664413] pcieport 0000:00:0a.0: setting latency timer to 64
[ 7.670373] pcieport 0000:00:0a.0: irq 97 for MSI/MSI-X
[ 7.678006] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1c
[ 7.684543] pcieport 0000:00:1c.0: setting latency timer to 64
[ 7.690511] pcieport 0000:00:1c.0: irq 98 for MSI/MSI-X
[ 7.698084] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1c
[ 7.704625] pcieport 0000:00:1c.4: setting latency timer to 64
[ 7.710590] pcieport 0000:00:1c.4: irq 99 for MSI/MSI-X
[ 7.717162] aer 0000:00:01.0:pcie02: service driver aer loaded
[ 7.723231] aer 0000:00:02.0:pcie02: service driver aer loaded
[ 7.729207] aer 0000:00:03.0:pcie02: service driver aer loaded
[ 7.735192] aer 0000:00:04.0:pcie02: service driver aer loaded
[ 7.741233] aer 0000:00:05.0:pcie02: service driver aer loaded
[ 7.747283] aer 0000:00:06.0:pcie02: service driver aer loaded
[ 7.753268] aer 0000:00:07.0:pcie02: service driver aer loaded
[ 7.759306] aer 0000:00:08.0:pcie02: service driver aer loaded
[ 7.765282] aer 0000:00:09.0:pcie02: service driver aer loaded
[ 7.771331] aer 0000:00:0a.0:pcie02: service driver aer loaded
[ 7.777600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.785406] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 7.793739] ACPI: Sleep Button [SLPB]
[ 7.798028] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 7.806361] ACPI: Power Button [PWRB]
[ 7.810635] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 7.818189] ACPI: Power Button [PWRF]
[ 7.823600] ACPI: acpi_idle registered with cpuidle
[ 7.830039] Monitor-Mwait will be used to enter C-3 state
[ 7.835629] Monitor-Mwait will be used to enter C-3 state
[ 8.102297] Initializing Nozomi driver 2.1d (build date: Nov 13 2010 15:41:18)
[ 8.112978] Non-volatile memory driver v1.3
[ 8.118028] Linux agpgart interface v0.103
[ 8.122456] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 8.131563] Hangcheck: Using getrawmonotonic().
[ 8.136406] [drm] Initialized drm 1.1.0 20060810
[ 8.142698] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 8.150331] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.177560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.220294] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 8.296315] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.338448] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 8.373599] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 8.380730] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 8.386801] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 8.392801] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 8.399145] Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
[ 8.405838] Copyright (c) 2007-2009 Intel Corporation.
[ 8.411119] igb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.417920] igb 0000:01:00.0: setting latency timer to 64
[ 8.423755] igb 0000:01:00.0: irq 100 for MSI/MSI-X
[ 8.428724] igb 0000:01:00.0: irq 101 for MSI/MSI-X
[ 8.433694] igb 0000:01:00.0: irq 102 for MSI/MSI-X
[ 8.438664] igb 0000:01:00.0: irq 103 for MSI/MSI-X
[ 8.443634] igb 0000:01:00.0: irq 104 for MSI/MSI-X
[ 8.448602] igb 0000:01:00.0: irq 105 for MSI/MSI-X
[ 8.453575] igb 0000:01:00.0: irq 106 for MSI/MSI-X
[ 8.458544] igb 0000:01:00.0: irq 107 for MSI/MSI-X
[ 8.463515] igb 0000:01:00.0: irq 108 for MSI/MSI-X
[ 8.648228] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 8.655190] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:8a:aa
[ 8.662480] igb 0000:01:00.0: eth0: PBA No: 0010ff-0ff
[ 8.667699] igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 8.675435] igb 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.682229] igb 0000:01:00.1: setting latency timer to 64
[ 8.688014] igb 0000:01:00.1: irq 109 for MSI/MSI-X
[ 8.692982] igb 0000:01:00.1: irq 110 for MSI/MSI-X
[ 8.697965] igb 0000:01:00.1: irq 111 for MSI/MSI-X
[ 8.702930] igb 0000:01:00.1: irq 112 for MSI/MSI-X
[ 8.707901] igb 0000:01:00.1: irq 113 for MSI/MSI-X
[ 8.712870] igb 0000:01:00.1: irq 114 for MSI/MSI-X
[ 8.717842] igb 0000:01:00.1: irq 115 for MSI/MSI-X
[ 8.722813] igb 0000:01:00.1: irq 116 for MSI/MSI-X
[ 8.727793] igb 0000:01:00.1: irq 117 for MSI/MSI-X
[ 8.902004] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 8.908963] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:c6:8a:ab
[ 8.916255] igb 0000:01:00.1: eth1: PBA No: 0010ff-0ff
[ 8.921482] igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 8.929385] Intel(R) Virtual Function Network Driver - version 1.0.0-k0
[ 8.936087] Copyright (c) 2009 Intel Corporation.
[ 8.941107] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.84-k2
[ 8.949087] ixgbe: Copyright (c) 1999-2010 Intel Corporation.
[ 8.955030] ixgbe 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.962063] ixgbe 0000:04:00.0: setting latency timer to 64
[ 9.038167] ixgbe 0000:04:00.0: irq 118 for MSI/MSI-X
[ 9.043316] ixgbe 0000:04:00.0: irq 119 for MSI/MSI-X
[ 9.048457] ixgbe 0000:04:00.0: irq 120 for MSI/MSI-X
[ 9.053601] ixgbe 0000:04:00.0: irq 121 for MSI/MSI-X
[ 9.058743] ixgbe 0000:04:00.0: irq 122 for MSI/MSI-X
[ 9.063886] ixgbe 0000:04:00.0: irq 123 for MSI/MSI-X
[ 9.069028] ixgbe 0000:04:00.0: irq 124 for MSI/MSI-X
[ 9.074173] ixgbe 0000:04:00.0: irq 125 for MSI/MSI-X
[ 9.079316] ixgbe 0000:04:00.0: irq 126 for MSI/MSI-X
[ 9.085550] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
[ 9.094030] ixgbe 0000:04:00.0: (PCI Express:2.5Gb/s:Width x8) 00:1b:21:29:17:d5
[ 9.101711] ixgbe 0000:04:00.0: MAC: 1, PHY: 5, PBA No: e27462-006
[ 9.111660] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection
[ 9.118364] ixgbe 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.125398] ixgbe 0000:04:00.1: setting latency timer to 64
[ 10.168222] ixgbe 0000:04:00.1: irq 127 for MSI/MSI-X
[ 10.173370] ixgbe 0000:04:00.1: irq 128 for MSI/MSI-X
[ 10.178508] ixgbe 0000:04:00.1: irq 129 for MSI/MSI-X
[ 10.183652] ixgbe 0000:04:00.1: irq 130 for MSI/MSI-X
[ 10.188794] ixgbe 0000:04:00.1: irq 131 for MSI/MSI-X
[ 10.193938] ixgbe 0000:04:00.1: irq 132 for MSI/MSI-X
[ 10.199081] ixgbe 0000:04:00.1: irq 133 for MSI/MSI-X
[ 10.204224] ixgbe 0000:04:00.1: irq 134 for MSI/MSI-X
[ 10.209367] ixgbe 0000:04:00.1: irq 135 for MSI/MSI-X
[ 10.215865] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8
[ 10.224339] ixgbe 0000:04:00.1: (PCI Express:2.5Gb/s:Width x8) 00:1b:21:29:17:d4
[ 10.232023] ixgbe 0000:04:00.1: MAC: 1, PHY: 5, PBA No: e27462-006
[ 10.242236] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection
[ 10.249051] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 10.256265] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 10.264356] jme: JMicron JMC2XX ethernet driver version 1.0.7
[ 10.270399] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 10.276577] e100: Copyright(c) 1999-2006 Intel Corporation
[ 10.282224] e100 0000:0c:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
[ 10.317354] e100 0000:0c:01.0: PME# disabled
[ 10.323369] e100 0000:0c:01.0: eth4: addr 0xfbd20000, irq 48, MAC addr 00:02:b3:b7:a9:b0
[ 10.333149] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[ 10.341410] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.6 (Oct 12, 2010)
[ 10.349682] sky2: driver version 1.28
[ 10.357547] tun: Universal TUN/TAP device driver, 1.6
[ 10.362683] tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
[ 10.370328] usbcore: registered new interface driver catc
[ 10.375814] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 10.382233] usbcore: registered new interface driver kaweth
[ 10.387890] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 10.395954] usbcore: registered new interface driver pegasus
[ 10.401703] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 10.409313] usbcore: registered new interface driver rtl8150
[ 10.415263] usbcore: registered new interface driver asix
[ 10.420933] usbcore: registered new interface driver cdc_ether
[ 10.427302] usbcore: registered new interface driver cdc_eem
[ 10.433911] usbcore: registered new interface driver dm9601
[ 10.439765] usbcore: registered new interface driver smsc75xx
[ 10.445992] usbcore: registered new interface driver smsc95xx
[ 10.452776] usbcore: registered new interface driver gl620a
[ 10.458627] usbcore: registered new interface driver net1080
[ 10.464562] usbcore: registered new interface driver plusb
[ 10.470524] usbcore: registered new interface driver rndis_host
[ 10.476729] usbcore: registered new interface driver cdc_subset
[ 10.482953] usbcore: registered new interface driver zaurus
[ 10.489506] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 10.497247] usbcore: registered new interface driver int51x1
[ 10.502994] netconsole: local port 6665
[ 10.506919] netconsole: local IP 10.0.0.0
[ 10.511021] netconsole: interface 'eth0'
[ 10.515040] netconsole: remote port 6666
[ 10.519062] netconsole: remote IP 10.239.51.110
[ 10.523686] netconsole: remote ethernet address 00:30:48:fe:19:94
[ 10.529866] netconsole: device eth0 not up yet, forcing it
[ 12.806421] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 19.340932] console [netcon0] enabled
[ 19.344939] netconsole: network logging started
[ 19.350474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 19.357095] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 19.363264] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.370518] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 19.376439] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 19.381820] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file 'devices'
[ 19.389721] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 19.397275] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 19.408727] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 19.417839] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 19.427414] ehci_hcd 0000:00:1a.7: debug port 1
[ 19.432034] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 19.445801] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 19.452671] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 19.458783] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbf02000
[ 19.464530] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 19.477515] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 19.491511] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 19.497442] usb usb1: default language 0x0409
[ 19.501905] usb usb1: udev 1, busnum 1, minor = 0
[ 19.506693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.513561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.520932] usb usb1: Product: EHCI Host Controller
[ 19.525901] usb usb1: Manufacturer: Linux 2.6.37-rc1+ ehci_hcd
[ 19.531816] usb usb1: SerialNumber: 0000:00:1a.7
[ 19.537495] usb usb1: usb_probe_device
[ 19.541587] usb usb1: configuration #1 chosen from 1 choice
[ 19.547505] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 19.554121] hub 1-0:1.0: usb_probe_interface
[ 19.558729] hub 1-0:1.0: usb_probe_interface - got id
[ 19.564114] hub 1-0:1.0: USB hub found
[ 19.567968] hub 1-0:1.0: 6 ports detected
[ 19.572073] hub 1-0:1.0: standalone hub
[ 19.576005] hub 1-0:1.0: no power switching (usb 1.0)
[ 19.581142] hub 1-0:1.0: individual port over-current protection
[ 19.587243] hub 1-0:1.0: power on to power good time: 20ms
[ 19.592819] hub 1-0:1.0: local power source is good
[ 19.597783] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 19.605114] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 19.613136] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 19.620397] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 19.626320] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 19.631640] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '002'
[ 19.639185] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 19.650095] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 19.659207] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch
[ 19.668779] ehci_hcd 0000:00:1d.7: debug port 1
[ 19.673404] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 19.687183] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 19.694056] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 19.699917] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbf01000
[ 19.705731] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001030 0 ACK POWER sig=se0 OCC OC
[ 19.714656] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 19.714660] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001030 0 ACK POWER sig=se0 OCC OC
[ 19.714704] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 19.714933] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0050
[ 19.714943] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001030 0 ACK POWER sig=se0 OCC OC
[ 19.714949] hub 1-0:1.0: over-current change on port 4
[ 19.714959] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 19.768270] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 19.781760] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 19.788781] usb usb2: default language 0x0409
[ 19.794317] usb usb2: udev 1, busnum 2, minor = 128
[ 19.799524] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 19.806643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 19.814256] usb usb2: Product: EHCI Host Controller
[ 19.815966] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001030 0 ACK POWER sig=se0 OCC OC
[ 19.815975] hub 1-0:1.0: over-current change on port 6
[ 19.816258] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 19.841010] usb usb2: Manufacturer: Linux 2.6.37-rc1+ ehci_hcd
[ 19.847174] usb usb2: SerialNumber: 0000:00:1d.7
[ 19.853021] usb usb2: usb_probe_device
[ 19.856867] usb usb2: configuration #1 chosen from 1 choice
[ 19.862567] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 19.870559] hub 2-0:1.0: usb_probe_interface
[ 19.874926] hub 2-0:1.0: usb_probe_interface - got id
[ 19.880068] hub 2-0:1.0: USB hub found
[ 19.883921] hub 2-0:1.0: 6 ports detected
[ 19.888027] hub 2-0:1.0: standalone hub
[ 19.891960] hub 2-0:1.0: no power switching (usb 1.0)
[ 19.897104] hub 2-0:1.0: individual port over-current protection
[ 19.903202] hub 2-0:1.0: power on to power good time: 20ms
[ 19.908780] hub 2-0:1.0: local power source is good
[ 19.913750] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 19.921079] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 19.929285] uhci_hcd: USB Universal Host Controller Interface driver
[ 19.935796] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.943030] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 19.948958] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 19.954281] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '003'
[ 19.961833] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 19.973256] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 19.978235] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 19.985018] uhci_hcd 0000:00:1a.0: Performing full reset
[ 19.990429] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 19.996294] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
[ 20.002206] usb usb3: default language 0x0409
[ 20.006670] usb usb3: udev 1, busnum 3, minor = 256
[ 20.011632] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.018506] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.025890] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 20.035069] hub 2-0:1.0: port 1: status 0501 change 0001
[ 20.040509] usb usb3: Product: UHCI Host Controller
[ 20.045473] usb usb3: Manufacturer: Linux 2.6.37-rc1+ uhci_hcd
[ 20.051389] usb usb3: SerialNumber: 0000:00:1a.0
[ 20.056995] usb usb3: usb_probe_device
[ 20.060849] usb usb3: configuration #1 chosen from 1 choice
[ 20.066522] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 20.072882] hub 3-0:1.0: usb_probe_interface
[ 20.077248] hub 3-0:1.0: usb_probe_interface - got id
[ 20.082391] hub 3-0:1.0: USB hub found
[ 20.086244] hub 3-0:1.0: 2 ports detected
[ 20.090350] hub 3-0:1.0: standalone hub
[ 20.094280] hub 3-0:1.0: no power switching (usb 1.0)
[ 20.099418] hub 3-0:1.0: individual port over-current protection
[ 20.105514] hub 3-0:1.0: power on to power good time: 2ms
[ 20.111009] hub 3-0:1.0: local power source is good
[ 20.115977] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 20.123284] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 20.130946] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 20.137102] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 20.144579] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
[ 20.144604] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 20.144608] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 20.144941] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '004'
[ 20.144950] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 20.176440] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 20.183708] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 20.188681] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.195466] uhci_hcd 0000:00:1a.2: Performing full reset
[ 20.200876] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 20.206739] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000f0a0
[ 20.212652] usb usb4: default language 0x0409
[ 20.217120] usb usb4: udev 1, busnum 4, minor = 384
[ 20.222087] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.228979] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.233849] ehci_hcd 0000:00:1d.7: port 1 full speed --> companion
[ 20.233854] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003801 0 ACK POWER OWNER sig=j CONNECT
[ 20.233861] hub 2-0:1.0: port 1 not reset yet, waiting 50ms
[ 20.257359] usb usb4: Product: UHCI Host Controller
[ 20.262330] usb usb4: Manufacturer: Linux 2.6.37-rc1+ uhci_hcd
[ 20.268249] usb usb4: SerialNumber: 0000:00:1a.2
[ 20.274094] usb usb4: usb_probe_device
[ 20.277945] usb usb4: configuration #1 chosen from 1 choice
[ 20.283619] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 20.284476] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC
[ 20.284512] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.284516] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
[ 20.310272] hub 4-0:1.0: usb_probe_interface
[ 20.314640] hub 4-0:1.0: usb_probe_interface - got id
[ 20.319782] hub 4-0:1.0: USB hub found
[ 20.323634] hub 4-0:1.0: 2 ports detected
[ 20.327743] hub 4-0:1.0: standalone hub
[ 20.331673] hub 4-0:1.0: no power switching (usb 1.0)
[ 20.336812] hub 4-0:1.0: individual port over-current protection
[ 20.342908] hub 4-0:1.0: power on to power good time: 2ms
[ 20.348402] hub 4-0:1.0: local power source is good
[ 20.353369] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 20.360368] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 20.368335] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 20.374485] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 20.381709] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 20.387629] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 20.392951] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '005'
[ 20.400519] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 20.411117] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 20.416091] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.422876] uhci_hcd 0000:00:1d.0: Performing full reset
[ 20.428285] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 20.434146] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
[ 20.440045] usb usb5: default language 0x0409
[ 20.444509] usb usb5: udev 1, busnum 5, minor = 512
[ 20.449478] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.456345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.463744] usb usb5: Product: UHCI Host Controller
[ 20.463749] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 20.474271] usb usb5: Manufacturer: Linux 2.6.37-rc1+ uhci_hcd
[ 20.480189] usb usb5: SerialNumber: 0000:00:1d.0
[ 20.485828] usb usb5: usb_probe_device
[ 20.489671] usb usb5: configuration #1 chosen from 1 choice
[ 20.495346] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 20.501711] hub 5-0:1.0: usb_probe_interface
[ 20.506080] hub 5-0:1.0: usb_probe_interface - got id
[ 20.511223] hub 5-0:1.0: USB hub found
[ 20.515073] hub 5-0:1.0: 2 ports detected
[ 20.519171] hub 5-0:1.0: standalone hub
[ 20.523104] hub 5-0:1.0: no power switching (usb 1.0)
[ 20.528249] hub 5-0:1.0: individual port over-current protection
[ 20.534346] hub 5-0:1.0: power on to power good time: 2ms
[ 20.539841] hub 5-0:1.0: local power source is good
[ 20.544809] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 20.551808] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 20.559982] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 20.566124] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 20.573347] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 20.579269] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 20.584592] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '006'
[ 20.592145] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 20.603617] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 20.608594] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.615376] uhci_hcd 0000:00:1d.1: Performing full reset
[ 20.620787] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 20.626632] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
[ 20.633652] usb usb6: default language 0x0409
[ 20.639191] usb usb6: udev 1, busnum 6, minor = 640
[ 20.644403] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.651805] uhci_hcd 0000:00:1d.0: port 1 portsc 009b,00
[ 20.657214] hub 5-0:1.0: port 1: status 0101 change 0003
[ 20.663717] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.671330] usb usb6: Product: UHCI Host Controller
[ 20.676554] usb usb6: Manufacturer: Linux 2.6.37-rc1+ uhci_hcd
[ 20.682879] usb usb6: SerialNumber: 0000:00:1d.1
[ 20.688691] usb usb6: usb_probe_device
[ 20.692538] usb usb6: configuration #1 chosen from 1 choice
[ 20.698214] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 20.704602] hub 6-0:1.0: usb_probe_interface
[ 20.708971] hub 6-0:1.0: usb_probe_interface - got id
[ 20.714116] hub 6-0:1.0: USB hub found
[ 20.717968] hub 6-0:1.0: 2 ports detected
[ 20.722075] hub 6-0:1.0: standalone hub
[ 20.726006] hub 6-0:1.0: no power switching (usb 1.0)
[ 20.731152] hub 6-0:1.0: individual port over-current protection
[ 20.737255] hub 6-0:1.0: power on to power good time: 2ms
[ 20.742749] hub 6-0:1.0: local power source is good
[ 20.747712] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 20.755269] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 20.762935] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 20.769293] hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 20.769645] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 20.769675] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 20.769680] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 20.769692] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '007'
[ 20.769701] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 20.809947] hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 20.817061] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 20.822041] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 20.828825] uhci_hcd 0000:00:1d.2: Performing full reset
[ 20.834235] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 20.840080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
[ 20.845977] usb usb7: default language 0x0409
[ 20.850441] usb usb7: udev 1, busnum 7, minor = 768
[ 20.855427] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 20.862295] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 20.869668] usb usb7: Product: UHCI Host Controller
[ 20.874635] usb usb7: Manufacturer: Linux 2.6.37-rc1+ uhci_hcd
[ 20.880549] usb usb7: SerialNumber: 0000:00:1d.2
[ 20.885902] usb usb7: usb_probe_device
[ 20.889996] usb usb7: configuration #1 chosen from 1 choice
[ 20.895914] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 20.902526] hub 7-0:1.0: usb_probe_interface
[ 20.907139] hub 7-0:1.0: usb_probe_interface - got id
[ 20.912524] hub 7-0:1.0: USB hub found
[ 20.916617] hub 7-0:1.0: 2 ports detected
[ 20.917825] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 20.928037] hub 7-0:1.0: standalone hub
[ 20.931968] hub 7-0:1.0: no power switching (usb 1.0)
[ 20.937114] hub 7-0:1.0: individual port over-current protection
[ 20.943210] hub 7-0:1.0: power on to power good time: 2ms
[ 20.948709] hub 7-0:1.0: local power source is good
[ 20.953672] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 20.960987] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '001'
[ 20.968967] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 20.976106] usbcore: registered new interface driver libusual
[ 20.986318] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 20.996674] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.001745] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.008634] mice: PS/2 mouse device common for all mice
[ 21.018775] rtc_cmos 00:08: RTC can wake from S4
[ 21.027853] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 21.034312] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 21.039494] usb 5-1: ep0 maxpacket = 8
[ 21.046217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 21.052632] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[ 21.057480] usb 5-1: udev 2, busnum 5, minor = 513
[ 21.057485] usb 5-1: New USB device found, idVendor=0557, idProduct=8021
[ 21.057491] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 21.058814] usb 5-1: usb_probe_device
[ 21.058821] usb 5-1: configuration #1 chosen from 1 choice
[ 21.061470] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 21.062090] hub 5-1:1.0: usb_probe_interface
[ 21.062093] hub 5-1:1.0: usb_probe_interface - got id
[ 21.062098] hub 5-1:1.0: USB hub found
[ 21.063461] hub 5-1:1.0: 4 ports detected
[ 21.063465] hub 5-1:1.0: standalone hub
[ 21.063469] hub 5-1:1.0: individual port power switching
[ 21.063473] hub 5-1:1.0: individual port over-current protection
[ 21.063477] hub 5-1:1.0: power on to power good time: 100ms
[ 21.065451] hub 5-1:1.0: local power source is good
[ 21.065457] hub 5-1:1.0: enabling power on all ports
[ 21.069826] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '002'
[ 21.069908] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 21.069914] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 21.069934] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 21.167447] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.171176] hub 5-1:1.0: port 1: status 0301 change 0001
[ 21.177155] usb usb3: suspend_rh (auto-stop)
[ 21.183293] iTCO_vendor_support: vendor-support=0
[ 21.188111] SoftDog: cannot register miscdev on minor=130 (err=-16)
[ 21.206709] cpuidle: using governor ladder
[ 21.227400] cpuidle: using governor menu
[ 21.231435] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 21.237475] ioatdma 0000:00:16.0: can't derive routing for PCI INT A
[ 21.243965] ioatdma 0000:00:16.0: PCI INT A: no GSI
[ 21.249081] ioatdma 0000:00:16.0: setting latency timer to 64
[ 21.255245] ioatdma 0000:00:16.0: irq 136 for MSI/MSI-X
[ 21.274919] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 128, phase 0, 12 us
[ 21.283183] hub 5-1:1.0: state 7 ports 4 chg 0002 evt 0000
[ 21.289870] hub 5-1:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
[ 21.361737] igb 0000:01:00.0: DCA enabled
[ 21.362692] usb 5-1.1: new low speed USB device using uhci_hcd and address 3
[ 21.373237] igb 0000:01:00.1: DCA enabled
[ 21.377420] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
[ 21.383882] ioatdma 0000:00:16.1: PCI INT B: no GSI
[ 21.388951] ioatdma 0000:00:16.1: setting latency timer to 64
[ 21.394826] ioatdma 0000:00:16.1: (31) exceeds max supported channels (4)
[ 21.426476] usb usb4: suspend_rh (auto-stop)
[ 21.499336] usb 5-1.1: skipped 1 descriptor after interface
[ 21.505016] usb 5-1.1: skipped 1 descriptor after interface
[ 21.510694] usb 5-1.1: skipped 1 descriptor after interface
[ 21.523260] usb 5-1.1: default language 0x0409
[ 21.558171] usb 5-1.1: udev 3, busnum 5, minor = 514
[ 21.563240] usb 5-1.1: New USB device found, idVendor=0557, idProduct=2261
[ 21.570213] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 21.577677] usb 5-1.1: Product: CS1716A V1.0.098
[ 21.582384] usb 5-1.1: Manufacturer: ATEN International Co. Ltd
[ 21.589438] usb 5-1.1: usb_probe_device
[ 21.593374] usb 5-1.1: configuration #1 chosen from 1 choice
[ 21.602020] ioatdma 0000:00:16.1: channel enumeration error
[ 21.603088] usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0)
[ 21.604167] usb 5-1.1: adding 5-1.1:1.1 (config #1, interface 1)
[ 21.604795] kworker/u:0 used greatest stack depth: 6080 bytes left
[ 21.604947] usb 5-1.1: adding 5-1.1:1.2 (config #1, interface 2)
[ 21.606058] /home/wfg/cc/linux-2.6/drivers/usb/core/inode.c: creating file '003'
[ 21.606460] hub 5-1:1.0: state 7 ports 4 chg 0000 evt 0002
[ 21.645371] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed
[ 21.652203] ioatdma 0000:00:16.1: can't derive routing for PCI INT B
[ 21.658711] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
[ 21.665182] ioatdma 0000:00:16.2: PCI INT C: no GSI
[ 21.670372] ioatdma 0000:00:16.2: setting latency timer to 64
[ 21.676266] ioatdma 0000:00:16.2: (31) exceeds max supported channels (4)
[ 21.883272] ioatdma 0000:00:16.2: channel enumeration error
[ 21.888939] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed
[ 21.895720] ioatdma 0000:00:16.2: can't derive routing for PCI INT C
[ 21.902192] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
[ 21.908634] ioatdma 0000:00:16.3: PCI INT D: no GSI
[ 21.913733] ioatdma 0000:00:16.3: setting latency timer to 64
[ 21.919591] ioatdma 0000:00:16.3: (31) exceeds max supported channels (4)
[ 21.926491] usb usb6: suspend_rh (auto-stop)
[ 22.126640] ioatdma 0000:00:16.3: channel enumeration error
[ 22.132312] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed
[ 22.139106] ioatdma 0000:00:16.3: can't derive routing for PCI INT D
[ 22.145592] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
[ 22.152035] ioatdma 0000:00:16.4: PCI INT A: no GSI
[ 22.157134] ioatdma 0000:00:16.4: setting latency timer to 64
[ 22.163062] ioatdma 0000:00:16.4: can't derive routing for PCI INT A
[ 22.169547] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
[ 22.175995] ioatdma 0000:00:16.5: PCI INT B: no GSI
[ 22.176024] usb usb7: suspend_rh (auto-stop)
[ 22.185358]
[ 22.187028] ioatdma 0000:00:16.5: setting latency timer to 64
[ 22.192886] ioatdma 0000:00:16.5: (31) exceeds max supported channels (4)
[ 22.399930] ioatdma 0000:00:16.5: channel enumeration error
[ 22.405595] ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed
[ 22.412384] ioatdma 0000:00:16.5: can't derive routing for PCI INT B
[ 22.418859] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
[ 22.425308] ioatdma 0000:00:16.6: PCI INT C: no GSI
[ 22.430408] ioatdma 0000:00:16.6: setting latency timer to 64
[ 22.436268] ioatdma 0000:00:16.6: (31) exceeds max supported channels (4)
[ 22.643297] ioatdma 0000:00:16.6: channel enumeration error
[ 22.648960] ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed
[ 22.655730] ioatdma 0000:00:16.6: can't derive routing for PCI INT C
[ 22.662198] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
[ 22.668654] ioatdma 0000:00:16.7: PCI INT D: no GSI
[ 22.673799] ioatdma 0000:00:16.7: setting latency timer to 64
[ 22.679660] ioatdma 0000:00:16.7: (31) exceeds max supported channels (4)
[ 22.886665] ioatdma 0000:00:16.7: channel enumeration error
[ 22.892337] ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed
[ 22.899118] ioatdma 0000:00:16.7: can't derive routing for PCI INT D
[ 22.907392] usbhid 5-1.1:1.0: usb_probe_interface
[ 22.912201] usbhid 5-1.1:1.0: usb_probe_interface - got id
[ 22.948539] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input3
[ 22.961004] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 8, phase 4, 118 us
[ 22.969568] generic-usb 0003:0557:2261.0001: input: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input0
[ 22.983292] usbhid 5-1.1:1.1: usb_probe_interface
[ 22.988102] usbhid 5-1.1:1.1: usb_probe_interface - got id
[ 23.028396] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input4
[ 23.040819] uhci_hcd 0000:00:1d.0: reserve dev 3 ep82-INT, period 8, phase 4, 118 us
[ 23.049614] generic-usb 0003:0557:2261.0002: input: USB HID v1.00 Device [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input1
[ 23.063162] usbhid 5-1.1:1.2: usb_probe_interface
[ 23.067965] usbhid 5-1.1:1.2: usb_probe_interface - got id
[ 23.095384] input: ATEN International Co. Ltd CS1716A V1.0.098 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1.1/5-1.1:1.2/input/input5
[ 23.108980] generic-usb 0003:0557:2261.0003: input: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1716A V1.0.098] on usb-0000:00:1d.0-1.1/input2
[ 23.123341] usbcore: registered new interface driver usbhid
[ 23.129016] usbhid: USB HID core driver
[ 23.134580] dell-wmi: No known WMI GUID found
[ 23.139050] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 23.143862] acer-wmi: No or unsupported WMI interface, unable to load
[ 23.154304] ALSA device list:
[ 23.157388] No soundcards found.
[ 23.161430] oprofile: using NMI interrupt.
[ 23.165674] netem: version 1.2
[ 23.168833] Netfilter messages via NETLINK v0.30.
[ 23.173688] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 23.180517] ctnetlink v0.93: registering with nfnetlink.
[ 23.185975] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 23.193029] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 23.200315] xt_time: kernel timezone is -0000
[ 23.206425] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.212506] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 23.219035] arp_tables: (C) 2002 David S. Miller
[ 23.224138] TCP bic registered
[ 23.227546] TCP cubic registered
[ 23.231126] TCP westwood registered
[ 23.234963] TCP highspeed registered
[ 23.238889] TCP hybla registered
[ 23.242464] TCP htcp registered
[ 23.245961] TCP vegas registered
[ 23.249545] TCP veno registered
[ 23.253040] TCP scalable registered
[ 23.256878] TCP lp registered
[ 23.260195] TCP yeah registered
[ 23.263690] TCP illinois registered
[ 23.267528] Initializing XFRM netlink socket
[ 23.272177] NET: Registered protocol family 17
[ 23.277239] NET: Registered protocol family 15
[ 23.281871] Bridge firewalling registered
[ 23.285989] Ebtables v2.0 registered
[ 23.309105] registered taskstats version 1
[ 23.316236] Magic number: 2:936:891
[ 23.320092] tty ptyy1: hash matches
[ 23.323862] rtc_cmos 00:08: setting system clock to 2010-11-13 15:52:04 UTC (1289663524)
[ 25.361318] Sending DHCP requests ., OK
[ 25.378225] IP-Config: Got DHCP answer from 192.168.1.209, my address is 192.168.1.31
[ 26.736524] IP-Config: Complete:
[ 26.739782] device=eth0, addr=192.168.1.31, mask=255.255.255.0, gw=192.168.1.1,
[ 26.747939] host=lkp-ne02, domain=tsp.org, nis-domain=(none),
[ 26.754311] bootserver=192.168.1.209, rootserver=10.239.51.240, rootpath=
[ 26.785639] VFS: Mounted root (nfs filesystem) on device 0:14.
[ 26.791842] debug: unmapping init memory ffffffff82448000..ffffffff826f0000
INIT: version 2.86 booting
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists