Message-id: <alpine.LFD.2.00.1011151103280.2939@x980>
Date:	Mon, 15 Nov 2010 11:07:04 -0500 (EST)
From:	Len Brown <lenb@...nel.org>
To:	Greg Kroah-Hartman <gregkh@...e.de>
Cc:	linux-pm@...ts.linux-foundation.org, linux-kernel@...r.kernel.org,
	linux-acpi@...r.kernel.org, x86@...nel.org
Subject: [PATCH RESEND] tools: add power/x86/x86_energy_perf_policy to program
 MSR_IA32_ENERGY_PERF_BIAS

From: Len Brown <len.brown@...el.com>

MSR_IA32_ENERGY_PERF_BIAS first became available on Westmere Xeon.
It is implemented in all Sandy Bridge processors -- mobile, desktop and server.
It is expected to become increasingly important in subsequent generations.

x86_energy_perf_policy is a user-space utility to set this
hardware energy vs performance policy hint in the processor.
Most systems would benefit from "x86_energy_perf_policy normal"
at system startup, as the hardware default is maximum performance
at the expense of energy efficiency.  See the comments
in the source code for more information.

Linux-2.6.36 added "epb" to /proc/cpuinfo to indicate
if an x86 processor supports MSR_IA32_ENERGY_PERF_BIAS,
though the kernel does not actually program the MSR.

In March, Venkatesh Pallipadi proposed a small driver
that programmed MSR_IA32_ENERGY_PERF_BIAS, based on
the cpufreq governor in use.  It also offered
a boot-time cmdline option to override.
http://lkml.org/lkml/2010/3/4/457
But hiding the hardware policy behind the
governor choice was deemed "kinda icky".

In June, I proposed a generic user/kernel API to
consolidate the power/performance policy trade-off.
"RFC: /sys/power/policy_preference"
http://lkml.org/lkml/2010/6/16/399
That is my preference for implementing this capability,
but I received no support on the list.

In September, I sent x86_energy_perf_policy.c to LKML,
a user-space utility that scribbles directly to the MSR.
http://lkml.org/lkml/2010/9/28/246

Here is the same utility re-sent, this time proposed
to reside in the kernel tools directory.

Signed-off-by: Len Brown <len.brown@...el.com>
---
 tools/power/x86/x86_energy_perf_policy/Makefile    |    7 +
 .../x86_energy_perf_policy.c                       |  358 ++++++++++++++++++++
 2 files changed, 365 insertions(+), 0 deletions(-)
 create mode 100644 tools/power/x86/x86_energy_perf_policy/Makefile
 create mode 100644 tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c

diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile
new file mode 100644
index 0000000..b0763da
--- /dev/null
+++ b/tools/power/x86/x86_energy_perf_policy/Makefile
@@ -0,0 +1,7 @@
+x86_energy_perf_policy : x86_energy_perf_policy.c
+
+clean :
+	rm -f x86_energy_perf_policy
+
+install :
+	install x86_energy_perf_policy /usr/bin/x86_energy_perf_policy
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
new file mode 100644
index 0000000..89394d9
--- /dev/null
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -0,0 +1,358 @@
+/*
+ * x86_energy_perf_policy -- set the energy versus performance
+ * policy preference bias on recent X86 processors.
+ */
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ * Len Brown <len.brown@...el.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/resource.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <sys/time.h>
+#include <stdlib.h>
+
+unsigned int verbose;		/* set with -v */
+unsigned int read_only;		/* set with -r */
+char *progname;
+unsigned long long new_bias;
+int cpu = -1;
+
+/*
+ * Usage:
+ *
+ * -c cpu: limit action to a single CPU (default is all CPUs)
+ * -v: verbose output (can invoke more than once)
+ * -r: read-only, don't change any settings
+ *
+ *  performance
+ *	Performance is paramount.
+ *	Unwilling to sacrafice any performance
+ *	for the sake of energy saving. (hardware default)
+ *
+ *  normal
+ *	Can tolerate minor performance compromise
+ *	for potentially significant energy savings.
+ *	(reasonable default for most desktops and servers)
+ *
+ *  powersave
+ *	Can tolerate significant performance hit
+ *	to maximize energy savings.
+ *
+ * n
+ *	a numerical value to write to the underlying MSR.
+ */
+void usage(void)
+{
+	printf("%s: [-c cpu] [-v] "
+		"(-r | 'performance' | 'normal' | 'powersave' | n)\n",
+		progname);
+}
+
+/*
+ * MSR_IA32_ENERGY_PERF_BIAS allows software to convey
+ * its policy for the relative importance of performance
+ * versus energy savings.
+ *
+ * The hardware uses this information in model-specific ways
+ * when it must choose trade-offs between performance and
+ * energy consumption.
+ *
+ * This policy hint does not supercede Processor Performance states
+ * (P-states) or CPU Idle power states (C-states), but allows
+ * software to have influence where it has been unable to
+ * express a preference in the past.
+ *
+ * For example, this setting may tell the hardware how
+ * aggressively or conservatively to control frequency
+ * in the "turbo range" above the explicitly OS-controlled
+ * P-state frequency range.  It may also tell the hardware
+ * how aggressively is should enter the OS requestec C-states.
+ *
+ * The support for this feature is indicated by CPUID.06H.ECX.bit3
+ * per the Intel Architectures Software Developer's Manual.
+ */
+
+#define MSR_IA32_ENERGY_PERF_BIAS	0x000001b0
+
+#define	BIAS_PERFORMANCE		0
+#define BIAS_BALANCE			6
+#define	BIAS_POWERSAVE			15
+
+cmdline(int argc, char **argv) {
+	int opt;
+
+	progname = argv[0];
+
+	while ((opt = getopt(argc, argv, "+rvc:")) != -1) {
+		switch (opt) {
+		case 'c':
+			cpu = atoi(optarg);
+			break;
+		case 'r':
+			read_only = 1;
+			break;
+		case 'v':
+			verbose++;
+			break;
+		default:
+			usage();
+			exit(-1);
+		}
+	}
+	/* if -r, then should be no additional optind */
+	if (read_only && (argc > optind)) {
+		usage();
+		exit(-1);
+	}
+
+	/*
+	 * if no -r , then must be one additional optind
+	 */
+	if (!read_only) {
+
+		if (argc != optind + 1) {
+			printf("must supply -r or policy param\n");
+			usage();
+			exit(-1);
+			}
+
+		if (!strcmp("performance", argv[optind])) {
+			new_bias = BIAS_PERFORMANCE;
+		} else if (!strcmp("normal", argv[optind])) {
+			new_bias = BIAS_BALANCE;
+		} else if (!strcmp("powersave", argv[optind])) {
+			new_bias = BIAS_POWERSAVE;
+		} else {
+			new_bias = atoll(argv[optind]);
+			if (new_bias > BIAS_POWERSAVE) {
+				usage();
+				exit(-1);
+			}
+		}
+	}
+}
+
+/*
+ * validate_cpuid()
+ * returns on success, quietly exits on failure (make verbose with -v)
+ */
+void validate_cpuid(void)
+{
+	unsigned int eax, ebx, ecx, edx, max_level;
+	char brand[16];
+	unsigned int fms, family, model, stepping, ht_capable;
+
+	eax = ebx = ecx = edx = 0;
+
+	asm("cpuid" : "=a" (max_level), "=b" (ebx), "=c" (ecx),
+		"=d" (edx) : "a" (0));
+
+	sprintf(brand, "%.4s%.4s%.4s", &ebx, &edx, &ecx);
+
+	if (strncmp(brand, "GenuineIntel", 12)) {
+		if (verbose)
+			printf("CPUID: %s != GenuineIntel\n", brand);
+		exit(-1);
+	}
+
+	asm("cpuid" : "=a" (fms), "=c" (ecx), "=d" (edx) : "a" (1) : "ebx");
+	family = (fms >> 8) & 0xf;
+	model = (fms >> 4) & 0xf;
+	stepping = fms & 0xf;
+	if (family == 6 || family == 0xf)
+		model += ((fms >> 16) & 0xf) << 4;
+
+	if (verbose > 1)
+		printf("CPUID %s %d levels family:model:stepping "
+			"0x%x:%x:%x (%d:%d:%d)\n", brand, max_level,
+			family, model, stepping, family, model, stepping);
+
+	if (!(edx & (1 << 5))) {
+		if (verbose)
+			printf("CPUID: no MSR\n");
+		exit(-1);
+	}
+
+	/*
+	 * Support for MSR_IA32_ENERGY_PERF_BIAS
+	 * is indicated by CPUID.06H.ECX.bit3
+	 */
+	asm("cpuid" : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx) : "a" (6));
+	if (verbose)
+		printf("CPUID.06H.ECX: 0x%x\n", ecx);
+	if (!(ecx & (1 << 3))) {
+		if (verbose)
+			printf("CPUID: No MSR_IA32_ENERGY_PERF_BIAS\n");
+		exit(-1);
+	}
+	return;	/* success */
+}
+
+check_dev_msr() {
+	struct stat sb;
+
+	if (stat("/dev/cpu/0/msr", &sb)) {
+		printf("no /dev/cpu/0/msr\n");
+		printf("Try \"# modprobe msr\"\n");
+		exit(-5);
+	}
+}
+
+unsigned long long get_msr(int cpu, int offset)
+{
+	unsigned long long msr;
+	char msr_path[32];
+	int retval;
+	int fd;
+
+	sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_path, O_RDONLY);
+	if (fd < 0) {
+		perror(msr_path);
+		exit(-1);
+	}
+
+	retval = pread(fd, &msr, sizeof msr, offset);
+
+	if (retval != sizeof msr) {
+		printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+	close(fd);
+	return msr;
+}
+
+unsigned long long  put_msr(int cpu, unsigned long long new_msr, int offset)
+{
+	unsigned long long old_msr;
+	char msr_path[32];
+	int retval;
+	int fd;
+
+	sprintf(msr_path, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_path, O_RDWR);
+	if (fd < 0) {
+		perror(msr_path);
+		exit(-1);
+	}
+
+	retval = pread(fd, &old_msr, sizeof old_msr, offset);
+	if (retval != sizeof old_msr) {
+		perror("pwrite");
+		printf("pread cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+
+	retval = pwrite(fd, &new_msr, sizeof new_msr, offset);
+	if (retval != sizeof new_msr) {
+		perror("pwrite");
+		printf("pwrite cpu%d 0x%x = %d\n", cpu, offset, retval);
+		exit(-2);
+	}
+
+	close(fd);
+
+	return old_msr;
+}
+
+void print_msr(int cpu)
+{
+	printf("cpu%d: 0x%016llx\n",
+		cpu, get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS));
+}
+
+void update_msr(int cpu)
+{
+	unsigned long long previous_msr;
+
+	previous_msr = put_msr(cpu, new_bias, MSR_IA32_ENERGY_PERF_BIAS);
+
+	if (verbose)
+		printf("cpu%d  msr0x%x 0x%016llx -> 0x%016llx\n",
+			cpu, MSR_IA32_ENERGY_PERF_BIAS, previous_msr, new_bias);
+
+	return;
+}
+
+char *proc_stat = "/proc/stat";
+/*
+ * run func() on every cpu in /dev/cpu
+ */
+void for_every_cpu(void (func)(int))
+{
+	FILE *fp;
+	int cpu_count;
+	int retval;
+
+	fp = fopen(proc_stat, "r");
+	if (fp == NULL) {
+		perror(proc_stat);
+		exit(-1);
+	}
+
+	retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n");
+	if (retval != 0) {
+		perror("/proc/stat format");
+		exit(-1);
+	}
+
+	for (cpu_count = 0; ; cpu_count++) {
+		int cpu;
+
+		retval = fscanf(fp,
+			"cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n",
+			&cpu);
+		if (retval != 1)
+			return;
+
+		func(cpu);
+	}
+	fclose(fp);
+}
+
+int main(int argc, char **argv)
+{
+	cmdline(argc, argv);
+
+	if (verbose > 1)
+		printf("x86_energy_perf_policy Aug 2, 2010"
+				" - Len Brown <lenb@...nel.org>\n");
+	if (verbose > 1 && !read_only)
+		printf("new_bias %lld\n", new_bias);
+
+	validate_cpuid();
+	check_dev_msr();
+
+	if (cpu != -1) {
+		if (read_only)
+			print_msr(cpu);
+		else
+			update_msr(cpu);
+	} else {
+		if (read_only)
+			for_every_cpu(print_msr);
+		else
+			for_every_cpu(update_msr);
+	}
+
+	return 0;
+}
-- 
1.7.3.1.127.g1bb28
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists