| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1290461073.12443.21.camel@Tobias-Karnat> Date: Mon, 22 Nov 2010 22:24:33 +0100 From: Tobias Karnat <tobias.karnat@...glemail.com> To: linux-ide@...r.kernel.org Cc: linux-kernel@...r.kernel.org Subject: sata_sil24: external raid storage mistaken as port multiplier Hi, I have a regression regarding the sata_sil24 driver: My RaidSonic Stardom SR3620-2S-SB2 is mistaken as a port multiplier, it did work with Linux 2.6.23. Maybe an module option to disable port multiplier support would already help. -Tobias Linux Tobias-Karnat 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:45:36 UTC 2010 x86_64 GNU/Linux 02:00.0 RAID bus controller: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller (rev 01) Subsystem: Silicon Image, Inc. Device 7132 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fadfbf80 (64-bit, non-prefetchable) [size=128] Region 2: Memory at fadfc000 (64-bit, non-prefetchable) [size=16K] Region 4: I/O ports at cc80 [size=128] Expansion ROM at fae00000 [disabled] [size=512K] Capabilities: [54] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [5c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Kernel driver in use: sata_sil24 Kernel modules: sata_sil24 [ 2044.110031] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xe frozen [ 2044.110036] ata3: irq_stat 0x00b40090, PHY RDY changed [ 2044.110044] ata3: hard resetting link [ 2046.330028] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 2047.110026] ata3.15: Port Multiplier 1.1, 0x1095:0x4723 r28, 3 ports, feat 0x1/0x9 [ 2047.510027] ata3.00: hard resetting link [ 2050.320020] ata3.00: failed to resume link (SControl 0) [ 2050.540038] ata3.00: softreset failed (SRST command error) [ 2050.720037] ata3.00: failed to read SCR 0 (Emask=0x1) [ 2050.720040] ata3.00: reset failed, giving up [ 2050.720046] ata3.15: hard resetting link [ 2050.720048] ata3: controller in dubious state, performing PORT_RST [ 2052.980030] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 2053.720024] ata3.00: hard resetting link [ 2056.520040] ata3.00: failed to resume link (SControl 0) [ 2057.420721] ata3.00: SATA link down (SStatus 0 SControl 0) [ 2057.620025] ata3.01: hard resetting link [ 2060.440045] ata3.01: failed to resume link (SControl 0) [ 2067.620038] ata3.01: softreset failed (timeout) [ 2067.650049] ata3.01: hard resetting link [ 2070.450048] ata3.01: failed to resume link (SControl 0) [ 2077.660099] ata3.01: softreset failed (timeout) [ 2077.760064] ata3.01: hard resetting link [ 2080.561452] ata3.01: failed to resume link (SControl 0) [ 2112.750663] ata3.01: softreset failed (timeout) [ 2112.890033] ata3.01: limiting SATA link speed to 1.5 Gbps [ 2112.890038] ata3.01: hard resetting link [ 2115.690110] ata3.01: failed to resume link (SControl 0) [ 2117.900038] ata3.01: softreset failed (timeout) [ 2117.990048] ata3.01: reset failed, giving up [ 2117.990055] ata3.15: hard resetting link [ 2120.220030] ata3.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 2121.000053] ata3.01: hard resetting link [ 2123.800040] ata3.01: failed to resume link (SControl 0) [ 2131.000059] ata3.01: softreset failed (timeout) [ 2131.100045] ata3.01: hard resetting link [ 2133.900047] ata3.01: failed to resume link (SControl 0) [ 2141.100154] ata3.01: softreset failed (timeout) [ 2141.200046] ata3.01: hard resetting link [ 2144.010034] ata3.01: failed to resume link (SControl 0) [ 2176.200663] ata3.01: softreset failed (timeout) [ 2176.200670] ata3.01: failed to read SCR 0 (Emask=0x40) [ 2176.200674] ata3.01: reset failed, giving up [ 2176.200680] ata3.15: hard resetting link [ 2178.290030] ata3.15: SATA link down (SStatus 0 SControl 0) [ 2181.294766] ata3.15: qc timeout (cmd 0xe4) [ 2181.294795] ata3.15: failed to read PMP GSCR[0] (Emask=0x5) [ 2181.294799] ata3.15: PMP revalidation failed (errno=-5) [ 2183.290042] ata3.15: hard resetting link [ 2185.382136] ata3.15: SATA link down (SStatus 0 SControl 0) [ 2188.382646] ata3.15: qc timeout (cmd 0xe4) [ 2188.382675] ata3.15: failed to read PMP GSCR[0] (Emask=0x5) [ 2188.382680] ata3.15: PMP revalidation failed (errno=-5) [ 2188.382685] ata3.15: limiting SATA link speed to 1.5 Gbps [ 2190.390642] ata3.15: hard resetting link [ 2192.480655] ata3.15: SATA link down (SStatus 0 SControl 10) [ 2195.480021] ata3.15: qc timeout (cmd 0xe4) [ 2195.480050] ata3.15: failed to read PMP GSCR[0] (Emask=0x5) [ 2195.480054] ata3.15: PMP revalidation failed (errno=-5) [ 2197.480016] ata3.15: hard resetting link [ 2199.570662] ata3.15: SATA link down (SStatus 0 SControl 10) [ 2202.570646] ata3.15: qc timeout (cmd 0xe4) [ 2202.570675] ata3.15: failed to read PMP GSCR[0] (Emask=0x5) [ 2202.570680] ata3.15: PMP revalidation failed (errno=-5) [ 2204.570638] ata3.15: hard resetting link [ 2206.670025] ata3.15: SATA link down (SStatus 0 SControl 10) [ 2209.670020] ata3.15: qc timeout (cmd 0xe4) [ 2209.670049] ata3.15: failed to read PMP GSCR[0] (Emask=0x5) [ 2209.670053] ata3.15: PMP revalidation failed (errno=-5) [ 2209.670056] ata3.15: failed to recover PMP after 5 tries, giving up [ 2209.670059] ata3.15: Port Multiplier detaching [ 2209.670088] ata3.00: disabled [ 2209.670104] ata3: hard resetting link [ 2211.760652] ata3: SATA link down (SStatus 0 SControl 10) [ 2211.760664] ata3: EH complete -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists