[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20110216001435.105289650@clark.kroah.org>
Date: Tue, 15 Feb 2011 16:12:37 -0800
From: Greg KH <gregkh@...e.de>
To: linux-kernel@...r.kernel.org, stable@...nel.org
Cc: stable-review@...nel.org, torvalds@...ux-foundation.org,
akpm@...ux-foundation.org, alan@...rguk.ukuu.org.uk,
Dirk Eibach <eibach@...ys.de>,
Guenter Roeck <guenter.roeck@...csson.com>
Subject: [100/272] hwmon: (lm63) Consider LM64 temperature offset
2.6.37-stable review patch. If anyone has any objections, please let us know.
------------------
From: Dirk Eibach <eibach@...ys.de>
commit 2778fb13ba0fed1b3e4a040e71f7881d399610a3 upstream.
LM64 has 16 degrees Celsius temperature offset on all
remote sensor registers.
This was not considered When LM64 support was added to lm63.c.
Signed-off-by: Dirk Eibach <eibach@...ys.de>
Signed-off-by: Guenter Roeck <guenter.roeck@...csson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...e.de>
---
drivers/hwmon/lm63.c | 59 ++++++++++++++++++++++++++++++++++++++++-----------
1 file changed, 47 insertions(+), 12 deletions(-)
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -98,6 +98,9 @@ static const unsigned short normal_i2c[]
* value, it uses signed 8-bit values with LSB = 1 degree Celsius.
* For remote temperature, low and high limits, it uses signed 11-bit values
* with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
+ * For LM64 the actual remote diode temperature is 16 degree Celsius higher
+ * than the register reading. Remote temperature setpoints have to be
+ * adapted accordingly.
*/
#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \
@@ -165,6 +168,8 @@ struct lm63_data {
struct mutex update_lock;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
+ int kind;
+ int temp2_offset;
/* registers values */
u8 config, config_fan;
@@ -247,16 +252,34 @@ static ssize_t show_pwm1_enable(struct d
return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2);
}
-static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
- char *buf)
+/*
+ * There are 8bit registers for both local(temp1) and remote(temp2) sensor.
+ * For remote sensor registers temp2_offset has to be considered,
+ * for local sensor it must not.
+ * So we need separate 8bit accessors for local and remote sensor.
+ */
+static ssize_t show_local_temp8(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index]));
}
-static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy,
- const char *buf, size_t count)
+static ssize_t show_remote_temp8(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct lm63_data *data = lm63_update_device(dev);
+ return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])
+ + data->temp2_offset);
+}
+
+static ssize_t set_local_temp8(struct device *dev,
+ struct device_attribute *dummy,
+ const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct lm63_data *data = i2c_get_clientdata(client);
@@ -274,7 +297,8 @@ static ssize_t show_temp11(struct device
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct lm63_data *data = lm63_update_device(dev);
- return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index]));
+ return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])
+ + data->temp2_offset);
}
static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
@@ -294,7 +318,7 @@ static ssize_t set_temp11(struct device
int nr = attr->index;
mutex_lock(&data->update_lock);
- data->temp11[nr] = TEMP11_TO_REG(val);
+ data->temp11[nr] = TEMP11_TO_REG(val - data->temp2_offset);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2],
data->temp11[nr] >> 8);
i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1],
@@ -310,6 +334,7 @@ static ssize_t show_temp2_crit_hyst(stru
{
struct lm63_data *data = lm63_update_device(dev);
return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2])
+ + data->temp2_offset
- TEMP8_FROM_REG(data->temp2_crit_hyst));
}
@@ -324,7 +349,7 @@ static ssize_t set_temp2_crit_hyst(struc
long hyst;
mutex_lock(&data->update_lock);
- hyst = TEMP8_FROM_REG(data->temp8[2]) - val;
+ hyst = TEMP8_FROM_REG(data->temp8[2]) + data->temp2_offset - val;
i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST,
HYST_TO_REG(hyst));
mutex_unlock(&data->update_lock);
@@ -355,16 +380,21 @@ static SENSOR_DEVICE_ATTR(fan1_min, S_IW
static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1);
static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8,
- set_temp8, 1);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8,
+ set_local_temp8, 1);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11,
set_temp11, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11,
set_temp11, 2);
-static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2);
+/*
+ * On LM63, temp2_crit can be set only once, which should be job
+ * of the bootloader.
+ */
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_remote_temp8,
+ NULL, 2);
static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst,
set_temp2_crit_hyst);
@@ -479,7 +509,12 @@ static int lm63_probe(struct i2c_client
data->valid = 0;
mutex_init(&data->update_lock);
- /* Initialize the LM63 chip */
+ /* Set the device type */
+ data->kind = id->driver_data;
+ if (data->kind == lm64)
+ data->temp2_offset = 16000;
+
+ /* Initialize chip */
lm63_init_client(new_client);
/* Register sysfs hooks */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists