[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1300811641-3327-1-git-send-email-benjamin.tissoires@enac.fr>
Date: Tue, 22 Mar 2011 17:34:01 +0100
From: Benjamin Tissoires <benjamin.tissoires@...c.fr>
To: Dmitry Torokhov <dmitry.torokhov@...il.com>,
Henrik Rydberg <rydberg@...omail.se>,
Benjamin Tissoires <benjamin.tissoires@...c.fr>,
Jiri Kosina <jkosina@...e.cz>,
Stephane Chatty <chatty@...-enac.fr>,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4] hid-multitouch: migrate 3M PCT touch screens to hid-multitouch
This patch merges the hid-3m-pct driver into hid-multitouch.
To keep devices working the same way they used to with hid-3m-pct,
we need to add two signal/noise ratios for width and height.
We also need to work on width/height to send proper
ABS_MT_ORIENTATION flag.
Importing 3M into hid-multitouch also solved the bug in which
devices handling width and height in their report descriptors
did not show ABS_MT_TOUCH_MAJOR and ABS_MT_TOUCH_MINOR.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@...c.fr>
Reviewed-by: Stéphane Chatty <chatty@...c.fr>
---
Hi guys,
I've added Henrik's patch and a comment:
/* we reach here when the last field in the
* report is not related to multitouch.
* This is not good. As a temporary solution,
* we trigger our mt event completion and
* ignore the field.
*/
Henrik, do I still have your Reviewed-and-tested-by ?
Cheers,
Benjamin
drivers/hid/Kconfig | 7 +-
drivers/hid/Makefile | 1 -
drivers/hid/hid-3m-pct.c | 305 ------------------------------------------
drivers/hid/hid-multitouch.c | 47 ++++++-
4 files changed, 46 insertions(+), 314 deletions(-)
delete mode 100644 drivers/hid/hid-3m-pct.c
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 1edb0bd..996ae3a 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -55,12 +55,6 @@ source "drivers/hid/usbhid/Kconfig"
menu "Special HID drivers"
depends on HID
-config HID_3M_PCT
- tristate "3M PCT touchscreen"
- depends on USB_HID
- ---help---
- Support for 3M PCT touch screens.
-
config HID_A4TECH
tristate "A4 tech mice" if EXPERT
depends on USB_HID
@@ -314,6 +308,7 @@ config HID_MULTITOUCH
Generic support for HID multitouch panels.
Say Y here if you have one of the following devices:
+ - 3M PCT touch screens
- Cando dual touch panel
- Cypress TrueTouch panels
- Hanvon dual touch panels
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index f8b90e4..11c9f0b 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -25,7 +25,6 @@ ifdef CONFIG_LOGIWII_FF
hid-logitech-y += hid-lg4ff.o
endif
-obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
obj-$(CONFIG_HID_ACRUX) += hid-axff.o
obj-$(CONFIG_HID_APPLE) += hid-apple.o
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
deleted file mode 100644
index 5243ae2..0000000
--- a/drivers/hid/hid-3m-pct.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * HID driver for 3M PCT multitouch panels
- *
- * Copyright (c) 2009-2010 Stephane Chatty <chatty@...c.fr>
- * Copyright (c) 2010 Henrik Rydberg <rydberg@...omail.se>
- * Copyright (c) 2010 Canonical, Ltd.
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/usb.h>
-#include <linux/input/mt.h>
-
-MODULE_AUTHOR("Stephane Chatty <chatty@...c.fr>");
-MODULE_DESCRIPTION("3M PCT multitouch panels");
-MODULE_LICENSE("GPL");
-
-#include "hid-ids.h"
-
-#define MAX_SLOTS 60
-
-/* estimated signal-to-noise ratios */
-#define SN_MOVE 2048
-#define SN_WIDTH 128
-
-struct mmm_finger {
- __s32 x, y, w, h;
- bool touch, valid;
-};
-
-struct mmm_data {
- struct mmm_finger f[MAX_SLOTS];
- __u8 curid;
- __u8 nexp, nreal;
- bool touch, valid;
-};
-
-static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- int f1 = field->logical_minimum;
- int f2 = field->logical_maximum;
- int df = f2 - f1;
-
- switch (usage->hid & HID_USAGE_PAGE) {
-
- case HID_UP_BUTTON:
- return -1;
-
- case HID_UP_GENDESK:
- switch (usage->hid) {
- case HID_GD_X:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_X);
- input_set_abs_params(hi->input, ABS_MT_POSITION_X,
- f1, f2, df / SN_MOVE, 0);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_X,
- f1, f2, df / SN_MOVE, 0);
- return 1;
- case HID_GD_Y:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_POSITION_Y);
- input_set_abs_params(hi->input, ABS_MT_POSITION_Y,
- f1, f2, df / SN_MOVE, 0);
- /* touchscreen emulation */
- input_set_abs_params(hi->input, ABS_Y,
- f1, f2, df / SN_MOVE, 0);
- return 1;
- }
- return 0;
-
- case HID_UP_DIGITIZER:
- switch (usage->hid) {
- /* we do not want to map these: no input-oriented meaning */
- case 0x14:
- case 0x23:
- case HID_DG_INPUTMODE:
- case HID_DG_DEVICEINDEX:
- case HID_DG_CONTACTCOUNT:
- case HID_DG_CONTACTMAX:
- case HID_DG_INRANGE:
- case HID_DG_CONFIDENCE:
- return -1;
- case HID_DG_TIPSWITCH:
- /* touchscreen emulation */
- hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
- input_set_capability(hi->input, EV_KEY, BTN_TOUCH);
- return 1;
- case HID_DG_WIDTH:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MAJOR);
- input_set_abs_params(hi->input, ABS_MT_TOUCH_MAJOR,
- f1, f2, df / SN_WIDTH, 0);
- return 1;
- case HID_DG_HEIGHT:
- hid_map_usage(hi, usage, bit, max,
- EV_ABS, ABS_MT_TOUCH_MINOR);
- input_set_abs_params(hi->input, ABS_MT_TOUCH_MINOR,
- f1, f2, df / SN_WIDTH, 0);
- input_set_abs_params(hi->input, ABS_MT_ORIENTATION,
- 0, 1, 0, 0);
- return 1;
- case HID_DG_CONTACTID:
- input_mt_init_slots(hi->input, MAX_SLOTS);
- return 1;
- }
- /* let hid-input decide for the others */
- return 0;
-
- case 0xff000000:
- /* we do not want to map these: no input-oriented meaning */
- return -1;
- }
-
- return 0;
-}
-
-static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- /* tell hid-input to skip setup of these event types */
- if (usage->type == EV_KEY || usage->type == EV_ABS)
- set_bit(usage->type, hi->input->evbit);
- return -1;
-}
-
-/*
- * this function is called when a whole packet has been received and processed,
- * so that it can decide what to send to the input layer.
- */
-static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
-{
- int i;
- for (i = 0; i < MAX_SLOTS; ++i) {
- struct mmm_finger *f = &md->f[i];
- if (!f->valid) {
- /* this finger is just placeholder data, ignore */
- continue;
- }
- input_mt_slot(input, i);
- input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch);
- if (f->touch) {
- /* this finger is on the screen */
- int wide = (f->w > f->h);
- /* divided by two to match visual scale of touch */
- int major = max(f->w, f->h) >> 1;
- int minor = min(f->w, f->h) >> 1;
-
- input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
- input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
- input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
- }
- f->valid = 0;
- }
-
- input_mt_report_pointer_emulation(input, true);
- input_sync(input);
-}
-
-/*
- * this function is called upon all reports
- * so that we can accumulate contact point information,
- * and call input_mt_sync after each point.
- */
-static int mmm_event(struct hid_device *hid, struct hid_field *field,
- struct hid_usage *usage, __s32 value)
-{
- struct mmm_data *md = hid_get_drvdata(hid);
- /*
- * strangely, this function can be called before
- * field->hidinput is initialized!
- */
- if (hid->claimed & HID_CLAIMED_INPUT) {
- struct input_dev *input = field->hidinput->input;
- switch (usage->hid) {
- case HID_DG_TIPSWITCH:
- md->touch = value;
- break;
- case HID_DG_CONFIDENCE:
- md->valid = value;
- break;
- case HID_DG_WIDTH:
- if (md->valid)
- md->f[md->curid].w = value;
- break;
- case HID_DG_HEIGHT:
- if (md->valid)
- md->f[md->curid].h = value;
- break;
- case HID_DG_CONTACTID:
- value = clamp_val(value, 0, MAX_SLOTS - 1);
- if (md->valid) {
- md->curid = value;
- md->f[value].touch = md->touch;
- md->f[value].valid = 1;
- md->nreal++;
- }
- break;
- case HID_GD_X:
- if (md->valid)
- md->f[md->curid].x = value;
- break;
- case HID_GD_Y:
- if (md->valid)
- md->f[md->curid].y = value;
- break;
- case HID_DG_CONTACTCOUNT:
- if (value)
- md->nexp = value;
- if (md->nreal >= md->nexp) {
- mmm_filter_event(md, input);
- md->nreal = 0;
- }
- break;
- }
- }
-
- /* we have handled the hidinput part, now remains hiddev */
- if (hid->claimed & HID_CLAIMED_HIDDEV && hid->hiddev_hid_event)
- hid->hiddev_hid_event(hid, field, usage, value);
-
- return 1;
-}
-
-static int mmm_probe(struct hid_device *hdev, const struct hid_device_id *id)
-{
- int ret;
- struct mmm_data *md;
-
- hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
- md = kzalloc(sizeof(struct mmm_data), GFP_KERNEL);
- if (!md) {
- hid_err(hdev, "cannot allocate 3M data\n");
- return -ENOMEM;
- }
- hid_set_drvdata(hdev, md);
-
- ret = hid_parse(hdev);
- if (!ret)
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
-
- if (ret)
- kfree(md);
- return ret;
-}
-
-static void mmm_remove(struct hid_device *hdev)
-{
- hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
- hid_set_drvdata(hdev, NULL);
-}
-
-static const struct hid_device_id mmm_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M1968) },
- { HID_USB_DEVICE(USB_VENDOR_ID_3M, USB_DEVICE_ID_3M2256) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, mmm_devices);
-
-static const struct hid_usage_id mmm_grabbed_usages[] = {
- { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID },
- { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1}
-};
-
-static struct hid_driver mmm_driver = {
- .name = "3m-pct",
- .id_table = mmm_devices,
- .probe = mmm_probe,
- .remove = mmm_remove,
- .input_mapping = mmm_input_mapping,
- .input_mapped = mmm_input_mapped,
- .usage_table = mmm_grabbed_usages,
- .event = mmm_event,
-};
-
-static int __init mmm_init(void)
-{
- return hid_register_driver(&mmm_driver);
-}
-
-static void __exit mmm_exit(void)
-{
- hid_unregister_driver(&mmm_driver);
-}
-
-module_init(mmm_init);
-module_exit(mmm_exit);
-
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index d31301e..0175f85 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -11,6 +11,12 @@
* Copyright (c) 2010 Henrik Rydberg <rydberg@...omail.se>
* Copyright (c) 2010 Canonical, Ltd.
*
+ * This code is partly based on hid-3m-pct.c:
+ *
+ * Copyright (c) 2009-2010 Stephane Chatty <chatty@...c.fr>
+ * Copyright (c) 2010 Henrik Rydberg <rydberg@...omail.se>
+ * Copyright (c) 2010 Canonical, Ltd.
+ *
*/
/*
@@ -69,6 +75,8 @@ struct mt_class {
__s32 name; /* MT_CLS */
__s32 quirks;
__s32 sn_move; /* Signal/noise ratio for move events */
+ __s32 sn_width; /* Signal/noise ratio for width events */
+ __s32 sn_height; /* Signal/noise ratio for height events */
__s32 sn_pressure; /* Signal/noise ratio for pressure events */
__u8 maxcontacts;
};
@@ -80,6 +88,7 @@ struct mt_class {
#define MT_CLS_CYPRESS 4
#define MT_CLS_EGALAX 5
#define MT_CLS_STANTUM 6
+#define MT_CLS_3M 7
#define MT_DEFAULT_MAXCONTACT 10
@@ -141,6 +150,12 @@ struct mt_class mt_classes[] = {
},
{ .name = MT_CLS_STANTUM,
.quirks = MT_QUIRK_VALID_IS_CONFIDENCE },
+ { .name = MT_CLS_3M,
+ .quirks = MT_QUIRK_VALID_IS_CONFIDENCE |
+ MT_QUIRK_SLOT_IS_CONTACTID,
+ .sn_move = 2048,
+ .sn_width = 128,
+ .sn_height = 128 },
{ }
};
@@ -230,11 +245,15 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MAJOR);
+ set_abs(hi->input, ABS_MT_TOUCH_MAJOR, field,
+ cls->sn_width);
td->last_slot_field = usage->hid;
return 1;
case HID_DG_HEIGHT:
hid_map_usage(hi, usage, bit, max,
EV_ABS, ABS_MT_TOUCH_MINOR);
+ set_abs(hi->input, ABS_MT_TOUCH_MINOR, field,
+ cls->sn_height);
input_set_abs_params(hi->input,
ABS_MT_ORIENTATION, 0, 1, 0, 0);
td->last_slot_field = usage->hid;
@@ -332,11 +351,18 @@ static void mt_emit_event(struct mt_device *td, struct input_dev *input)
input_mt_report_slot_state(input, MT_TOOL_FINGER,
s->touch_state);
if (s->touch_state) {
+ /* this finger is on the screen */
+ int wide = (s->w > s->h);
+ /* divided by two to match visual scale of touch */
+ int major = max(s->w, s->h) >> 1;
+ int minor = min(s->w, s->h) >> 1;
+
input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);
+ input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, s->w);
- input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, s->h);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
+ input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
}
s->seen_in_this_frame = false;
@@ -398,6 +424,15 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
break;
default:
+ if (td->last_field_index
+ && field->index == td->last_field_index)
+ /* we reach here when the last field in the
+ * report is not related to multitouch.
+ * This is not good. As a temporary solution,
+ * we trigger our mt event completion and
+ * ignore the field.
+ */
+ break;
/* fallback to the generic hidinput handling */
return 0;
}
@@ -513,6 +548,14 @@ static void mt_remove(struct hid_device *hdev)
static const struct hid_device_id mt_devices[] = {
+ /* 3M panels */
+ { .driver_data = MT_CLS_3M,
+ HID_USB_DEVICE(USB_VENDOR_ID_3M,
+ USB_DEVICE_ID_3M1968) },
+ { .driver_data = MT_CLS_3M,
+ HID_USB_DEVICE(USB_VENDOR_ID_3M,
+ USB_DEVICE_ID_3M2256) },
+
/* Cando panels */
{ .driver_data = MT_CLS_DUAL_INRANGE_CONTACTNUMBER,
HID_USB_DEVICE(USB_VENDOR_ID_CANDO,
--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists