| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1301491283-14128-2-git-send-email-samuel.gabrielsson@gmail.com>
Date: Wed, 30 Mar 2011 15:21:23 +0200
From: Samuel Gabrielsson <samuel.gabrielsson@...il.com>
To: mchehab@...hat.com
CC: linux-edac@...r.kernel.org, linux-kernel@...r.kernel.org,
Samuel Gabrielsson <samuel.gabrielsson@...il.com>
Subject: [PATCH 2/2] i7core_edac: Add scrubbing support
Add scrubbing support to i7core_edac, tested on intel Xeon L5638.
Signed-off-by: Samuel Gabrielsson <samuel.gabrielsson@...il.com>
---
drivers/edac/i7core_edac.c | 126 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 126 insertions(+), 0 deletions(-)
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 1db6092..3afb187 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -78,6 +78,8 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
/* OFFSETS for Device 0 Function 0 */
#define MC_CFG_CONTROL 0x90
+ #define MC_CFG_UNLOCK 0x02
+ #define MC_CFG_LOCK 0x00
/* OFFSETS for Device 3 Function 0 */
@@ -98,6 +100,14 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL 0x48
+ #define SSR_MODE_DISABLE 0x00
+ #define SSR_MODE_ENABLE 0x01
+ #define SSR_MODE_MASK 0x03
+
+#define MC_SCRUB_CONTROL 0x4c
+ #define STARTSCRUB (1 << 24)
+
#define MC_COR_ECC_CNT_0 0x80
#define MC_COR_ECC_CNT_1 0x84
#define MC_COR_ECC_CNT_2 0x88
@@ -1871,6 +1881,116 @@ static int i7core_mce_check_error(void *priv, struct mce *mce)
return 1;
}
+/*
+ * set_sdram_scrub_rate This routine sets byte/sec bandwidth scrub rate
+ * to hardware according to SCRUBINTERVAL formula
+ * found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ const u32 cache_line_size = 64;
+ const u32 freq_dclk = 800*1000000;
+ u32 dw_scrub;
+ u32 dw_ssr;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+ if (new_bw == 0) {
+ /* Prepare to disable petrol scrub */
+ dw_scrub &= ~STARTSCRUB;
+ /* Stop the patrol scrub engine */
+ write_and_test(pdev, MC_SCRUB_CONTROL, dw_scrub & ~0x00ffffff);
+
+ /* Get current status of scrub rate and set bit to disable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_DISABLE;
+ } else {
+ /*
+ * Translate the desired scrub rate to a register value and
+ * program the cooresponding register value.
+ */
+ dw_scrub = 0x00ffffff & (cache_line_size * freq_dclk / new_bw);
+
+ /* Start the patrol scrub engine */
+ pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+ STARTSCRUB | dw_scrub);
+
+ /* Get current status of scrub rate and set bit to enable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_ENABLE;
+ }
+ /* Disable or enable scrubbing */
+ pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+ return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate This routine convert current scrub rate value
+ * into byte/sec bandwidth accourding to
+ * SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ const u32 cache_line_size = 64;
+ const u32 freq_dclk = 800*1000000;
+ u32 scrubval;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ /* Get current scrub control data */
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+ /* Mask highest 8-bits to 0 */
+ scrubval &= 0x00ffffff;
+ if (!scrubval)
+ return 0;
+
+ /* Calculate scrub rate value into byte/sec bandwidth */
+ return 0xffffffff & (cache_line_size * freq_dclk / (u64) scrubval);
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Unlock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_UNLOCK);
+
+ mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+ mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Lock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_LOCK);
+}
+
static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
{
pvt->i7core_pci = edac_pci_create_generic_ctl(
@@ -1909,6 +2029,9 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &i7core_dev->pdev[0]->dev);
+ /* Disable scrubrate setting */
+ disable_sdram_scrub_setting(mci);
+
/* Disable MCE NMI handler */
edac_mce_unregister(&pvt->edac_mce);
@@ -1982,6 +2105,9 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
/* Set the function pointer to an actual operation function */
mci->edac_check = i7core_check_error;
+ /* Enable scrubrate setting */
+ enable_sdram_scrub_setting(mci);
+
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
debugf0("MC: " __FILE__
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists