linux-kernel - [PATCH 1/1] libata: ahci_start

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1303541890-14528-1-git-send-email-jipeng2005@gmail.com>
Date:	Fri, 22 Apr 2011 23:58:10 -0700
From:	"Jian Peng" <jipeng2005@...il.com>
To:	"Jeff Garzik" <jgarzik@...ox.com>, "Tejun Heo" <htejun@...il.com>
cc:	linux-ide@...r.kernel.org, linux-kernel@...r.kernel.org,
	"Jian Peng" <jipeng2005@...il.com>
Subject: [PATCH 1/1] libata: ahci_start_engine compliant to AHCI spec

At the end of section 10.1 of AHCI spec (rev 1.3), it states

Software shall not set PxCMD.ST to 1 until it is determined that
a functoinal device is present on the port as determined by
PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h

Even though most AHCI host controller works without this check,
specific controller will fail under this condition.

Signed-off-by: Jian Peng <jipeng2005@...il.com>
---
 drivers/ata/libahci.c |   21 +++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 26d4523..83ed544 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -539,6 +539,27 @@ void ahci_start_engine(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
+	u8 status;
+
+	status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+	/*
+	 * At end of section 10.1 of AHCI spec (rev 1.3), it states
+	 * Software shall not set PxCMD.ST to 1 until it is determined
+	 * that a functoinal device is present on the port as determined by
+	 * PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h
+	 *
+	 * Even though most AHCI host controllers work without this check,
+	 * specific controller will fail under this condition
+	 */
+	if (status & (ATA_BUSY | ATA_DRQ))
+		return;
+	else {
+		ahci_scr_read(&ap->link, SCR_STATUS, &tmp);
+
+		if ((tmp & 0xf) != 0x3)
+			return;
+	}
 
 	/* start DMA */
 	tmp = readl(port_mmio + PORT_CMD);
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/