| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1304747831-2098-1-git-send-email-sboyd@codeaurora.org> Date: Fri, 6 May 2011 22:57:11 -0700 From: Stephen Boyd <sboyd@...eaurora.org> To: Andrew Morton <akpm@...ux-foundation.org> Cc: linux-kernel@...r.kernel.org, linux-arch@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, uclinux-dist-devel@...ckfin.uclinux.org, linux-m32r@...linux-m32r.org, linux-mips@...ux-mips.org, linuxppc-dev@...ts.ozlabs.org, linux-sh@...r.kernel.org, sparclinux@...r.kernel.org, Chris Metcalf <cmetcalf@...era.com>, user-mode-linux-devel@...ts.sourceforge.net, x86@...nel.org Subject: [PATCH] lib: Consolidate DEBUG_STACK_USAGE option Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it to lib/Kconfig.debug so each arch doesn't have to define it. This obviously makes the option generic, but that's fine because the config is already used in generic code. It's not obvious to me that sysrq-P actually does anything different with this option enabled, but I erred on the side of caution by keeping the most inclusive wording. Cc: linux-arch@...r.kernel.org Cc: linux-arm-kernel@...ts.infradead.org Cc: uclinux-dist-devel@...ckfin.uclinux.org Cc: linux-m32r@...linux-m32r.org Cc: linux-mips@...ux-mips.org Cc: linuxppc-dev@...ts.ozlabs.org Cc: linux-sh@...r.kernel.org Cc: sparclinux@...r.kernel.org Cc: Chris Metcalf <cmetcalf@...era.com> Cc: user-mode-linux-devel@...ts.sourceforge.net Cc: x86@...nel.org Signed-off-by: Stephen Boyd <sboyd@...eaurora.org> --- This is on top of mmotm's lib-conslidate-debug_per_cpu_maps patch. arch/arm/Kconfig.debug | 7 ------- arch/blackfin/Kconfig.debug | 9 --------- arch/m32r/Kconfig.debug | 9 --------- arch/mips/Kconfig.debug | 9 --------- arch/powerpc/Kconfig.debug | 9 --------- arch/score/Kconfig.debug | 9 --------- arch/sh/Kconfig.debug | 9 --------- arch/sparc/Kconfig.debug | 9 --------- arch/tile/Kconfig.debug | 9 --------- arch/um/Kconfig.debug | 9 --------- arch/unicore32/Kconfig.debug | 7 ------- arch/x86/Kconfig.debug | 9 --------- lib/Kconfig.debug | 9 +++++++++ 13 files changed, 9 insertions(+), 104 deletions(-) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03d01d7..81cbe40 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -63,13 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 2641731..19ccfb3 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -9,15 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - - This option will slow down process creation somewhat. - config DEBUG_VERBOSE bool "Verbose fault messages" default y diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug index 2e1019d..bb1afc1 100644 --- a/arch/m32r/Kconfig.debug +++ b/arch/m32r/Kconfig.debug @@ -9,15 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_PAGEALLOC bool "Debug page memory allocations" depends on DEBUG_KERNEL && BROKEN diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 5358f90..83ed00a 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -76,15 +76,6 @@ config DEBUG_STACKOVERFLOW provides another way to check stack overflow happened on kernel mode stack usually caused by nested interruption. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config SMTC_IDLE_HOOK_DEBUG bool "Enable additional debug checks before going into CPU idle loop" depends on DEBUG_KERNEL && MIPS_MT_SMTC diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 12a8d18..f862fc0 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -35,15 +35,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config HCALL_STATS bool "Hypervisor call instrumentation" depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug index 451ed54..a1f346d 100644 --- a/arch/score/Kconfig.debug +++ b/arch/score/Kconfig.debug @@ -16,15 +16,6 @@ config CMDLINE other cases you can specify kernel args so that you don't have to set them up in board prom initialization routines. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config RUNTIME_DEBUG bool "Enable run-time debugging" depends on DEBUG_KERNEL diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 1553d56..c1d5a82 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -28,15 +28,6 @@ config STACK_DEBUG every function call and will therefore incur a major performance hit. Most users should say N. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug index d9a795e..6db35fb 100644 --- a/arch/sparc/Kconfig.debug +++ b/arch/sparc/Kconfig.debug @@ -6,15 +6,6 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on SPARC64 && DEBUG_KERNEL diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug index 9bc161a..ddbfc33 100644 --- a/arch/tile/Kconfig.debug +++ b/arch/tile/Kconfig.debug @@ -21,15 +21,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_EXTRA_FLAGS string "Additional compiler arguments when building with '-g'" depends on DEBUG_INFO diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index 8fce5e5..34ac57f 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -28,13 +28,4 @@ config GCOV If you're involved in UML kernel development and want to use gcov, say Y. If you're unsure, say N. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - default N - help - Track the maximum kernel stack usage - this will look at each - kernel stack at process exit and log it if it's the deepest - stack seen so far. - - This option will slow down process creation and destruction somewhat. endmenu diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug index 3140151..ae2ec33 100644 --- a/arch/unicore32/Kconfig.debug +++ b/arch/unicore32/Kconfig.debug @@ -27,13 +27,6 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions" diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 1bf8839..c0f8a5c 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -66,15 +66,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - ---help--- - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config X86_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index c0872ee..37fae12 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -654,6 +654,15 @@ config STACKTRACE bool depends on STACKTRACE_SUPPORT +config DEBUG_STACK_USAGE + bool "Stack utilization instrumentation" + depends on DEBUG_KERNEL + help + Enables the display of the minimum amount of free stack which each + task has ever had available in the sysrq-T and sysrq-P debug output. + + This option will slow down process creation somewhat. + config DEBUG_KOBJECT bool "kobject debugging" depends on DEBUG_KERNEL -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists