| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1306985632-18820-1-git-send-email-shawn.guo@linaro.org>
Date: Thu, 2 Jun 2011 11:33:48 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: <linux-kernel@...r.kernel.org>
CC: <grant.likely@...retlab.ca>, <arnd@...db.de>, <olof@...om.net>,
<kernel@...gutronix.de>, <linux-arm-kernel@...ts.infradead.org>,
<patches@...aro.org>
Subject: [PATCH v2 0/4] Move plat-mxc gpio driver into drivers/gpio
The patch set moves plat-mxc gpio driver into drivers/gpio, and
migrates mach-imx and mach-mx5 to the new driver.
Changes since v1:
* Eliminate the use of port->id which is not needed yet.
* Move the call to mxc_register_gpio into per-soc-init function.
As the result, all the board files get touched to plug in this
hook which will benefit all the possible per-soc setup coming
in the future.
Shawn Guo (4):
gpio: gpio-mxc: add gpio driver for Freescale MXC architecture
ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc
ARM: mxc: migrate mach-imx gpio driver to gpio-mxc
ARM: mxc: remove plat-mxc/gpio driver
arch/arm/mach-imx/mach-apf9328.c | 2 +
arch/arm/mach-imx/mach-armadillo5x0.c | 2 +
arch/arm/mach-imx/mach-bug.c | 2 +
arch/arm/mach-imx/mach-cpuimx27.c | 2 +
arch/arm/mach-imx/mach-cpuimx35.c | 2 +
arch/arm/mach-imx/mach-eukrea_cpuimx25.c | 2 +
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 2 +
arch/arm/mach-imx/mach-imx27ipcam.c | 2 +
arch/arm/mach-imx/mach-imx27lite.c | 2 +
arch/arm/mach-imx/mach-kzm_arm11_01.c | 2 +
arch/arm/mach-imx/mach-mx1ads.c | 2 +
arch/arm/mach-imx/mach-mx21ads.c | 2 +
arch/arm/mach-imx/mach-mx25_3ds.c | 2 +
arch/arm/mach-imx/mach-mx27_3ds.c | 2 +
arch/arm/mach-imx/mach-mx27ads.c | 2 +
arch/arm/mach-imx/mach-mx31_3ds.c | 2 +
arch/arm/mach-imx/mach-mx31ads.c | 2 +
arch/arm/mach-imx/mach-mx31lilly.c | 2 +
arch/arm/mach-imx/mach-mx31lite.c | 2 +
arch/arm/mach-imx/mach-mx31moboard.c | 2 +
arch/arm/mach-imx/mach-mx35_3ds.c | 2 +
arch/arm/mach-imx/mach-mxt_td60.c | 2 +
arch/arm/mach-imx/mach-pca100.c | 2 +
arch/arm/mach-imx/mach-pcm037.c | 2 +
arch/arm/mach-imx/mach-pcm038.c | 2 +
arch/arm/mach-imx/mach-pcm043.c | 2 +
arch/arm/mach-imx/mach-qong.c | 2 +
arch/arm/mach-imx/mach-scb9328.c | 2 +
arch/arm/mach-imx/mach-vpr200.c | 2 +
arch/arm/mach-imx/mm-imx1.c | 17 +-
arch/arm/mach-imx/mm-imx21.c | 21 +-
arch/arm/mach-imx/mm-imx25.c | 16 +-
arch/arm/mach-imx/mm-imx27.c | 21 +-
arch/arm/mach-imx/mm-imx31.c | 15 +-
arch/arm/mach-imx/mm-imx35.c | 15 +-
arch/arm/mach-mx5/board-cpuimx51.c | 2 +
arch/arm/mach-mx5/board-cpuimx51sd.c | 2 +
arch/arm/mach-mx5/board-mx50_rdp.c | 2 +
arch/arm/mach-mx5/board-mx51_3ds.c | 2 +
arch/arm/mach-mx5/board-mx51_babbage.c | 2 +
arch/arm/mach-mx5/board-mx51_efikamx.c | 2 +
arch/arm/mach-mx5/board-mx51_efikasb.c | 2 +
arch/arm/mach-mx5/board-mx53_evk.c | 2 +
arch/arm/mach-mx5/board-mx53_loco.c | 2 +
arch/arm/mach-mx5/board-mx53_smd.c | 2 +
arch/arm/mach-mx5/devices.c | 64 ----
arch/arm/mach-mx5/mm-mx50.c | 21 +-
arch/arm/mach-mx5/mm.c | 25 +-
arch/arm/plat-mxc/Makefile | 2 +-
arch/arm/plat-mxc/devices.c | 11 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-gpio-mxc.c | 32 ++
arch/arm/plat-mxc/gpio.c | 361 -------------------
arch/arm/plat-mxc/include/mach/common.h | 12 +-
arch/arm/plat-mxc/include/mach/devices-common.h | 2 +
arch/arm/plat-mxc/include/mach/gpio.h | 27 --
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-mxc.c | 433 +++++++++++++++++++++++
58 files changed, 648 insertions(+), 527 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists