| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1306985632-18820-3-git-send-email-shawn.guo@linaro.org>
Date: Thu, 2 Jun 2011 11:33:50 +0800
From: Shawn Guo <shawn.guo@...aro.org>
To: <linux-kernel@...r.kernel.org>
CC: <grant.likely@...retlab.ca>, <arnd@...db.de>, <olof@...om.net>,
<kernel@...gutronix.de>, <linux-arm-kernel@...ts.infradead.org>,
<patches@...aro.org>, Shawn Guo <shawn.guo@...aro.org>
Subject: [PATCH v2 2/4] ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc
It registers platform device for drivers/gpio/gpio-mxc, and migrates
mx50/mx51/mx53 gpio driver to gpio-mxc.
Signed-off-by: Shawn Guo <shawn.guo@...aro.org>
---
arch/arm/mach-mx5/board-cpuimx51.c | 2 +
arch/arm/mach-mx5/board-cpuimx51sd.c | 2 +
arch/arm/mach-mx5/board-mx50_rdp.c | 2 +
arch/arm/mach-mx5/board-mx51_3ds.c | 2 +
arch/arm/mach-mx5/board-mx51_babbage.c | 2 +
arch/arm/mach-mx5/board-mx51_efikamx.c | 2 +
arch/arm/mach-mx5/board-mx51_efikasb.c | 2 +
arch/arm/mach-mx5/board-mx53_evk.c | 2 +
arch/arm/mach-mx5/board-mx53_loco.c | 2 +
arch/arm/mach-mx5/board-mx53_smd.c | 2 +
arch/arm/mach-mx5/devices.c | 64 -----------------------
arch/arm/mach-mx5/mm-mx50.c | 21 ++++----
arch/arm/mach-mx5/mm.c | 25 +++++++--
arch/arm/plat-mxc/devices.c | 11 ++++
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-gpio-mxc.c | 32 +++++++++++
arch/arm/plat-mxc/include/mach/common.h | 6 ++-
arch/arm/plat-mxc/include/mach/devices-common.h | 2 +
18 files changed, 100 insertions(+), 82 deletions(-)
create mode 100644 arch/arm/plat-mxc/devices/platform-gpio-mxc.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 4efa02e..add0d42 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode);
*/
static void __init eukrea_cpuimx51_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
ARRAY_SIZE(eukrea_cpuimx51_pads));
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5ef25a5..ff096d5 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = {
static void __init eukrea_cpuimx51sd_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 11210e1..7de25c6 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = {
*/
static void __init mx50_rdp_board_init(void)
{
+ imx50_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
ARRAY_SIZE(mx50_rdp_pads));
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 63dfbea..3112d15 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = {
*/
static void __init mx51_3ds_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
ARRAY_SIZE(mx51_3ds_pads));
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index c7b3fab..6021dd0 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void)
iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ imx51_soc_init();
+
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e36231..3be603b 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init);
static void __init mx51_efikamx_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 474fc6e..4b2e522 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void)
static void __init efikasb_board_init(void)
{
+ imx51_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
ARRAY_SIZE(mx51efikasb_pads));
efika_board_common_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index f87d571..0d9218a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = {
static void __init mx53_evk_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 1b947e8..359c3e2 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
static void __init mx53_loco_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 817c089..bc02894 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
static void __init mx53_smd_board_init(void)
{
+ imx53_soc_init();
+
mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 153ada5..371ca8c 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -12,7 +12,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
@@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
-
-static struct mxc_gpio_port mxc_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO1_LOW,
- .irq_high = MX51_MXC_INT_GPIO1_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START
- },
- {
- .chip.label = "gpio-1",
- .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO2_LOW,
- .irq_high = MX51_MXC_INT_GPIO2_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
- },
- {
- .chip.label = "gpio-2",
- .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO3_LOW,
- .irq_high = MX51_MXC_INT_GPIO3_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
- },
- {
- .chip.label = "gpio-3",
- .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
- .irq = MX51_MXC_INT_GPIO4_LOW,
- .irq_high = MX51_MXC_INT_GPIO4_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
- },
- {
- .chip.label = "gpio-4",
- .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
- .irq = MX53_INT_GPIO5_LOW,
- .irq_high = MX53_INT_GPIO5_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
- },
- {
- .chip.label = "gpio-5",
- .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
- .irq = MX53_INT_GPIO6_LOW,
- .irq_high = MX53_INT_GPIO6_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
- },
- {
- .chip.label = "gpio-6",
- .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
- .irq = MX53_INT_GPIO7_LOW,
- .irq_high = MX53_INT_GPIO7_HIGH,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
- },
-};
-
-int __init imx51_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, 4);
-}
-
-int __init imx53_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
index b9c363b..28c3f60 100644
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -26,7 +26,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-v3.h>
-#include <mach/gpio.h>
#include <mach/irqs.h>
/*
@@ -56,17 +55,17 @@ void __init imx50_init_early(void)
mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
}
-static struct mxc_gpio_port imx50_gpio_ports[] = {
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
- DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
-};
-
void __init mx50_init_irq(void)
{
tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
- mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports));
+}
+
+void __init imx50_soc_init(void)
+{
+ mxc_register_gpio(0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+ mxc_register_gpio(1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+ mxc_register_gpio(2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+ mxc_register_gpio(3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+ mxc_register_gpio(4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+ mxc_register_gpio(5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index ff55730..800bb8b2 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -69,8 +69,6 @@ void __init imx53_init_early(void)
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
-int imx51_register_gpios(void);
-
void __init mx51_init_irq(void)
{
unsigned long tzic_addr;
@@ -86,11 +84,8 @@ void __init mx51_init_irq(void)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
- imx51_register_gpios();
}
-int imx53_register_gpios(void);
-
void __init mx53_init_irq(void)
{
unsigned long tzic_addr;
@@ -103,5 +98,23 @@ void __init mx53_init_irq(void)
panic("unable to map TZIC interrupt controller\n");
tzic_init_irq(tzic_virt);
- imx53_register_gpios();
+}
+
+void __init imx51_soc_init(void)
+{
+ mxc_register_gpio(0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
+ mxc_register_gpio(1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
+ mxc_register_gpio(2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
+ mxc_register_gpio(3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+}
+
+void __init imx53_soc_init(void)
+{
+ mxc_register_gpio(0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
+ mxc_register_gpio(1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
+ mxc_register_gpio(2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
+ mxc_register_gpio(3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
+ mxc_register_gpio(4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
+ mxc_register_gpio(5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
+ mxc_register_gpio(6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
}
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index eee1b60..fb166b2 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -89,3 +89,14 @@ err:
return pdev;
}
+
+struct device mxc_aips_bus = {
+ .init_name = "mxc_aips",
+ .parent = &platform_bus,
+};
+
+static int __init mxc_device_init(void)
+{
+ return device_register(&mxc_aips_bus);
+}
+core_initcall(mxc_device_init);
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index ad2922a..b41bf97 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
new file mode 100644
index 0000000..cf1b7fd
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/devices-common.h>
+
+struct platform_device *__init mxc_register_gpio(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq, int irq_high)
+{
+ struct resource res[] = {
+ {
+ .start = iobase,
+ .end = iobase + iosize - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = irq_high,
+ .end = irq_high,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return platform_device_register_resndata(&mxc_aips_bus,
+ "gpio-mxc", id, res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index da79918..1e1d476 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -43,6 +43,9 @@ extern void mx35_init_irq(void);
extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
+extern void imx50_soc_init(void);
+extern void imx51_soc_init(void);
+extern void imx53_soc_init(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
@@ -55,7 +58,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mxc_register_gpios(void);
+extern struct platform_device *mxc_register_gpio(int id,
+ resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index fa84773..03f6266 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
+extern struct device mxc_aips_bus;
+
struct platform_device *imx_add_platform_device_dmamask(
const char *name, int id,
const struct resource *res, unsigned int num_resources,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists