| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <201106232142.06364.linux@rainbow-software.org>
Date: Thu, 23 Jun 2011 21:42:04 +0200
From: Ondrej Zary <linux@...nbow-software.org>
To: "Greg Kroah-Hartman" <greg@...ah.com>
Cc: Marek Belisko <marek.belisko@...il.com>,
Kernel development list <linux-kernel@...r.kernel.org>
Subject: [PATCH 09/11] CodingStyle fixes in ft1000.h
Major CodingStyle fixes in ft1000.h
Signed-off-by: Ondrej Zary <linux@...nbow-software.org>
---
drivers/staging/ft1000/ft1000-pcmcia/ft1000.h | 621 ++++++++++++-------------
1 files changed, 297 insertions(+), 324 deletions(-)
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h b/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h
index f4c8735..e1aa528 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h
@@ -1,281 +1,252 @@
-//---------------------------------------------------------------------------
-// FT1000 driver for Flarion Flash OFDM NIC Device
-//
-// Copyright (C) 2002 Flarion Technologies, All rights reserved.
-//
-// This program is free software; you can redistribute it and/or modify it
-// under the terms of the GNU General Public License as published by the Free
-// Software Foundation; either version 2 of the License, or (at your option) any
-// later version. This program is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-// or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-// more details. You should have received a copy of the GNU General Public
-// License along with this program; if not, write to the
-// Free Software Foundation, Inc., 59 Temple Place -
-// Suite 330, Boston, MA 02111-1307, USA.
-//---------------------------------------------------------------------------
-//
-// File: ft1000.h
-//
-// Description: Common structures and defines
-//
-// History:
-// 8/29/02 Whc Ported to Linux.
-// 7/19/04 Whc Drop packet and cmd msg with pseudo header
-// checksum
-// 10/27/04 Whc Added dynamic downloading of test image.
-// 01/11/04 Whc Added support for Magnemite ASIC
-//
-//---------------------------------------------------------------------------
+/*---------------------------------------------------------------------------
+ FT1000 driver for Flarion Flash OFDM NIC Device
+
+ Copyright (C) 2002 Flarion Technologies, All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option) any
+ later version. This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place -
+ Suite 330, Boston, MA 02111-1307, USA.
+---------------------------------------------------------------------------
+ Description: Common structures and defines
+---------------------------------------------------------------------------*/
#ifndef _FT1000H_
#define _FT1000H_
-
-#define FT1000_DRV_VER 0x01010300
-
-#define DSPVERSZ 4
-#define HWSERNUMSZ 16
-#define SKUSZ 20
-#define EUISZ 8
-#define MODESZ 2
-#define CALVERSZ 2
-#define CALDATESZ 6
-
-// Pseudo Header structure
-struct pseudo_hdr
-{
- unsigned short length; // length of msg body
- unsigned char source; // hardware source id
- // Host = 0x10
- // Dsp = 0x20
- unsigned char destination; // hardware destination id (refer to source)
- unsigned char portdest; // software destination port id
- // Host = 0x00
- // Applicaton Broadcast = 0x10
- // Network Stack = 0x20
- // Dsp OAM = 0x80
- // Dsp Airlink = 0x90
- // Dsp Loader = 0xa0
- // Dsp MIP = 0xb0
- unsigned char portsrc; // software source port id (refer to portdest)
- unsigned short sh_str_id; // not used
- unsigned char control; // not used
- unsigned char rsvd1;
- unsigned char seq_num; // message sequence number
- unsigned char rsvd2;
- unsigned short qos_class; // not used
- unsigned short checksum; // pseudo header checksum
-} __attribute__ ((packed));
-
-#define ELECTRABUZZ_ID 0 // ASIC ID for Electrabuzz
-#define MAGNEMITE_ID 0x1a01 // ASIC ID for Magnemite
-
-// MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE
-#define FT1000_REG_DPRAM_ADDR 0x000E // DPADR - Dual Port Ram Indirect Address Register
-#define FT1000_REG_SUP_CTRL 0x0020 // HCTR - Host Control Register
-#define FT1000_REG_SUP_STAT 0x0022 // HSTAT - Host Status Register
-#define FT1000_REG_RESET 0x0024 // HCTR - Host Control Register
-#define FT1000_REG_SUP_ISR 0x0026 // HISR - Host Interrupt Status Register
-#define FT1000_REG_SUP_IMASK 0x0028 // HIMASK - Host Interrupt Mask
-#define FT1000_REG_DOORBELL 0x002a // DBELL - Door Bell Register
-#define FT1000_REG_ASIC_ID 0x002e // ASICID - ASIC Identification Number
- // (Electrabuzz=0 Magnemite=0x1A01)
-
-// MEMORY MAP FOR ELECTRABUZZ ASIC
-
-#define FT1000_REG_UFIFO_STAT 0x0000 // UFSR - Uplink FIFO status register
-#define FT1000_REG_UFIFO_BEG 0x0002 // UFBR - Uplink FIFO beginning register
-#define FT1000_REG_UFIFO_MID 0x0004 // UFMR - Uplink FIFO middle register
-#define FT1000_REG_UFIFO_END 0x0006 // UFER - Uplink FIFO end register
-#define FT1000_REG_DFIFO_STAT 0x0008 // DFSR - Downlink FIFO status register
-#define FT1000_REG_DFIFO 0x000A // DFR - Downlink FIFO Register
-#define FT1000_REG_DPRAM_DATA 0x000C // DPRAM - Dual Port Indirect Data Register
-#define FT1000_REG_WATERMARK 0x0010 // WMARK - Watermark Register
-
-// MEMORY MAP FOR MAGNEMITE
-#define FT1000_REG_MAG_UFDR 0x0000 // UFDR - Uplink FIFO Data Register (32-bits)
-#define FT1000_REG_MAG_UFDRL 0x0000 // UFDRL - Uplink FIFO Data Register low-word (16-bits)
-#define FT1000_REG_MAG_UFDRH 0x0002 // UFDRH - Uplink FIFO Data Register high-word (16-bits)
-#define FT1000_REG_MAG_UFER 0x0004 // UFER - Uplink FIFO End Register
-#define FT1000_REG_MAG_UFSR 0x0006 // UFSR - Uplink FIFO Status Register
-#define FT1000_REG_MAG_DFR 0x0008 // DFR - Downlink FIFO Register (32-bits)
-#define FT1000_REG_MAG_DFRL 0x0008 // DFRL - Downlink FIFO Register low-word (16-bits)
-#define FT1000_REG_MAG_DFRH 0x000a // DFRH - Downlink FIFO Register high-word (16-bits)
-#define FT1000_REG_MAG_DFSR 0x000c // DFSR - Downlink FIFO Status Register
-#define FT1000_REG_MAG_DPDATA 0x0010 // DPDATA - Dual Port RAM Indirect Data Register (32-bits)
-#define FT1000_REG_MAG_DPDATAL 0x0010 // DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits)
-#define FT1000_REG_MAG_DPDATAH 0x0012 // DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits)
-#define FT1000_REG_MAG_WATERMARK 0x002c // WMARK - Watermark Register
-
-// Reserved Dual Port RAM offsets for Electrabuzz
-#define FT1000_DPRAM_TX_BASE 0x0002 // Host to PC Card Messaging Area
-#define FT1000_DPRAM_RX_BASE 0x0800 // PC Card to Host Messaging Area
-#define FT1000_FIFO_LEN 0x7FC // total length for DSP FIFO tracking
-#define FT1000_HI_HO 0x7FE // heartbeat with HI/HO
-#define FT1000_DSP_STATUS 0xFFE // dsp status - non-zero is a request to reset dsp
-#define FT1000_DSP_LED 0xFFA // dsp led status for PAD device
-#define FT1000_DSP_CON_STATE 0xFF8 // DSP Connection Status Info
-#define FT1000_DPRAM_FEFE 0x002 // location for dsp ready indicator
-#define FT1000_DSP_TIMER0 0x1FF0 // Timer Field from Basestation
-#define FT1000_DSP_TIMER1 0x1FF2 // Timer Field from Basestation
-#define FT1000_DSP_TIMER2 0x1FF4 // Timer Field from Basestation
-#define FT1000_DSP_TIMER3 0x1FF6 // Timer Field from Basestation
-
-// Reserved Dual Port RAM offsets for Magnemite
-#define FT1000_DPRAM_MAG_TX_BASE 0x0000 // Host to PC Card Messaging Area
-#define FT1000_DPRAM_MAG_RX_BASE 0x0200 // PC Card to Host Messaging Area
-#define FT1000_MAG_FIFO_LEN 0x1FF // total length for DSP FIFO tracking
-#define FT1000_MAG_FIFO_LEN_INDX 0x1 // low-word index
-#define FT1000_MAG_HI_HO 0x1FF // heartbeat with HI/HO
-#define FT1000_MAG_HI_HO_INDX 0x0 // high-word index
-#define FT1000_MAG_DSP_LED 0x3FE // dsp led status for PAD device
-#define FT1000_MAG_DSP_LED_INDX 0x0 // dsp led status for PAD device
-
-#define FT1000_MAG_DSP_CON_STATE 0x3FE // DSP Connection Status Info
-#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 // DSP Connection Status Info
-
-#define FT1000_MAG_DPRAM_FEFE 0x000 // location for dsp ready indicator
-#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 // location for dsp ready indicator
-
-#define FT1000_MAG_DSP_TIMER0 0x3FC // Timer Field from Basestation
-#define FT1000_MAG_DSP_TIMER0_INDX 0x1
-
-#define FT1000_MAG_DSP_TIMER1 0x3FC // Timer Field from Basestation
-#define FT1000_MAG_DSP_TIMER1_INDX 0x0
-
-#define FT1000_MAG_DSP_TIMER2 0x3FD // Timer Field from Basestation
-#define FT1000_MAG_DSP_TIMER2_INDX 0x1
-
-#define FT1000_MAG_DSP_TIMER3 0x3FD // Timer Field from Basestation
-#define FT1000_MAG_DSP_TIMER3_INDX 0x0
-
-#define FT1000_MAG_TOTAL_LEN 0x200
-#define FT1000_MAG_TOTAL_LEN_INDX 0x1
-
-#define FT1000_MAG_PH_LEN 0x200
-#define FT1000_MAG_PH_LEN_INDX 0x0
-
-#define FT1000_MAG_PORT_ID 0x201
-#define FT1000_MAG_PORT_ID_INDX 0x0
-
-#define HOST_INTF_LE 0x0 // Host interface little endian mode
-#define HOST_INTF_BE 0x1 // Host interface big endian mode
-
-// PC Card to Host Doorbell assignments
-#define FT1000_DB_DPRAM_RX 0x0001 // this value indicates that DSP has
- // data for host in DPRAM
-#define FT1000_ASIC_RESET_REQ 0x0004 // DSP requesting host to reset the ASIC
-#define FT1000_DSP_ASIC_RESET 0x0008 // DSP indicating host that it will reset the ASIC
-#define FT1000_DB_COND_RESET 0x0010 // DSP request for a card reset.
-
-// Host to PC Card Doorbell assignments
-#define FT1000_DB_DPRAM_TX 0x0100 // this value indicates that host has
- // data for DSP in DPRAM.
-#define FT1000_ASIC_RESET_DSP 0x0400 // Responds to FT1000_ASIC_RESET_REQ
-#define FT1000_DB_HB 0x1000 // Indicates that supervisor
- // has a heartbeat message for DSP.
-
-#define FT1000_DPRAM_BASE 0x0000 // Dual Port RAM starting offset
-
-#define hi 0x6869 // PC Card heartbeat values
-#define ho 0x686f // PC Card heartbeat values
-
-// Magnemite specific defines
-#define hi_mag 0x6968 // Byte swap hi to avoid additional system call
-#define ho_mag 0x6f68 // Byte swap ho to avoid additional system call
-
-//
-// Bit field definitions for Host Interrupt Status Register
-//
-// Indicate the cause of an interrupt.
-//
-#define ISR_EMPTY 0x00 // no bits set
-#define ISR_DOORBELL_ACK 0x01 // Doorbell acknowledge from DSP
-#define ISR_DOORBELL_PEND 0x02 // Doorbell pending from DSP
-#define ISR_RCV 0x04 // Packet available in Downlink FIFO
-#define ISR_WATERMARK 0x08 // Watermark requirements satisfied
-
-// Bit field definition for Host Interrupt Mask
-#define ISR_MASK_NONE 0x0000 // no bits set
-#define ISR_MASK_DOORBELL_ACK 0x0001 // Doorbell acknowledge mask
-#define ISR_MASK_DOORBELL_PEND 0x0002 // Doorbell pending mask
-#define ISR_MASK_RCV 0x0004 // Downlink Packet available mask
-#define ISR_MASK_WATERMARK 0x0008 // Watermark interrupt mask
-#define ISR_MASK_ALL 0xffff // Mask all interrupts
-
-// Bit field definition for Host Control Register
-#define DSP_RESET_BIT 0x0001 // Bit field to control dsp reset state
- // (0 = out of reset 1 = reset)
-#define ASIC_RESET_BIT 0x0002 // Bit field to control ASIC reset state
- // (0 = out of reset 1 = reset)
-
-// Default interrupt mask (Enable Doorbell pending and Packet available interrupts)
-#define ISR_DEFAULT_MASK 0x7ff9
-
-// Application specific IDs
-#define DSPID 0x20
-#define HOSTID 0x10
-#define DSPAIRID 0x90
-#define DRIVERID 0x00
-#define NETWORKID 0x20
-
-// Size of DPRAM Message
-#define MAX_CMD_SQSIZE 1780
-
-#define ENET_MAX_SIZE 1514
-#define ENET_HEADER_SIZE 14
-
-#define SLOWQ_TYPE 0
-#define FASTQ_TYPE 1
-
-#define MAX_DSP_SESS_REC 1024
-
-#define DSP_QID_OFFSET 4
-#define PSEUDOSZ 16
-#define PSEUDOSZWRD 8
-
-// Maximum number of occurrence of pseudo header errors before resetting PC Card.
-#define MAX_PH_ERR 300
-
-// Driver message types
-#define MEDIA_STATE 0x0010
-#define TIME_UPDATE 0x0020
-#define DSP_PROVISION 0x0030
-#define DSP_INIT_MSG 0x0050
-#define DSP_HIBERNATE 0x0060
-
-#define DSP_STORE_INFO 0x0070
-#define DSP_GET_INFO 0x0071
-#define GET_DRV_ERR_RPT_MSG 0x0073
-#define RSP_DRV_ERR_RPT_MSG 0x0074
-
-// Driver Error Messages for DSP
-#define DSP_HB_INFO 0x7ef0
-#define DSP_FIFO_INFO 0x7ef1
-#define DSP_CONDRESET_INFO 0x7ef2
-#define DSP_CMDLEN_INFO 0x7ef3
-#define DSP_CMDPHCKSUM_INFO 0x7ef4
-#define DSP_PKTPHCKSUM_INFO 0x7ef5
-#define DSP_PKTLEN_INFO 0x7ef6
-#define DSP_USER_RESET 0x7ef7
-#define FIFO_FLUSH_MAXLIMIT 0x7ef8
-#define FIFO_FLUSH_BADCNT 0x7ef9
-#define FIFO_ZERO_LEN 0x7efa
-
-#define HOST_QID_OFFSET 5
-#define QTYPE_OFFSET 13
-
-#define SUCCESS 0x00
-#define FAILURE 0x01
-
-#define MAXIMUM_ASIC_HB_CNT 15
+#define FT1000_DRV_VER 0x01010300
+
+#define DSPVERSZ 4
+#define HWSERNUMSZ 16
+#define SKUSZ 20
+#define EUISZ 8
+#define MODESZ 2
+#define CALVERSZ 2
+#define CALDATESZ 6
+
+/* Pseudo Header structure */
+struct pseudo_hdr {
+ unsigned short length; /* length of msg body */
+ unsigned char source; /* hardware source id */
+ /* Host = 0x10 */
+ /* Dsp = 0x20 */
+ unsigned char destination; /* hardware destination id (refer to source) */
+ unsigned char portdest; /* software destination port id */
+ /* Host = 0x00 */
+ /* Applicaton Broadcast = 0x10 */
+ /* Network Stack = 0x20 */
+ /* Dsp OAM = 0x80 */
+ /* Dsp Airlink = 0x90 */
+ /* Dsp Loader = 0xa0 */
+ /* Dsp MIP = 0xb0 */
+ unsigned char portsrc; /* software source port id (refer to portdest) */
+ unsigned short sh_str_id; /* not used */
+ unsigned char control; /* not used */
+ unsigned char rsvd1;
+ unsigned char seq_num; /* message sequence number */
+ unsigned char rsvd2;
+ unsigned short qos_class; /* not used */
+ unsigned short checksum; /* pseudo header checksum */
+} __packed;
+
+#define ELECTRABUZZ_ID 0 /* ASIC ID for Electrabuzz */
+#define MAGNEMITE_ID 0x1a01 /* ASIC ID for Magnemite */
+
+/* MEMORY MAP common to both ELECTRABUZZ and MAGNEMITE */
+#define FT1000_REG_DPRAM_ADDR 0x000E /* DPADR - Dual Port Ram Indirect Address Register */
+#define FT1000_REG_SUP_CTRL 0x0020 /* HCTR - Host Control Register */
+#define FT1000_REG_SUP_STAT 0x0022 /* HSTAT - Host Status Register */
+#define FT1000_REG_RESET 0x0024 /* HCTR - Host Control Register */
+#define FT1000_REG_SUP_ISR 0x0026 /* HISR - Host Interrupt Status Register */
+#define FT1000_REG_SUP_IMASK 0x0028 /* HIMASK - Host Interrupt Mask */
+#define FT1000_REG_DOORBELL 0x002a /* DBELL - Door Bell Register */
+#define FT1000_REG_ASIC_ID 0x002e /* ASICID - ASIC Identification Number */
+
+/* MEMORY MAP FOR ELECTRABUZZ ASIC */
+#define FT1000_REG_UFIFO_STAT 0x0000 /* UFSR - Uplink FIFO status register */
+#define FT1000_REG_UFIFO_BEG 0x0002 /* UFBR - Uplink FIFO beginning register */
+#define FT1000_REG_UFIFO_MID 0x0004 /* UFMR - Uplink FIFO middle register */
+#define FT1000_REG_UFIFO_END 0x0006 /* UFER - Uplink FIFO end register */
+#define FT1000_REG_DFIFO_STAT 0x0008 /* DFSR - Downlink FIFO status register */
+#define FT1000_REG_DFIFO 0x000A /* DFR - Downlink FIFO Register */
+#define FT1000_REG_DPRAM_DATA 0x000C /* DPRAM - Dual Port Indirect Data Register */
+#define FT1000_REG_WATERMARK 0x0010 /* WMARK - Watermark Register */
+
+/* MEMORY MAP FOR MAGNEMITE */
+#define FT1000_REG_MAG_UFDR 0x0000 /* UFDR - Uplink FIFO Data Register (32-bits) */
+#define FT1000_REG_MAG_UFDRL 0x0000 /* UFDRL - Uplink FIFO Data Register low-word (16-bits) */
+#define FT1000_REG_MAG_UFDRH 0x0002 /* UFDRH - Uplink FIFO Data Register high-word (16-bits) */
+#define FT1000_REG_MAG_UFER 0x0004 /* UFER - Uplink FIFO End Register */
+#define FT1000_REG_MAG_UFSR 0x0006 /* UFSR - Uplink FIFO Status Register */
+#define FT1000_REG_MAG_DFR 0x0008 /* DFR - Downlink FIFO Register (32-bits) */
+#define FT1000_REG_MAG_DFRL 0x0008 /* DFRL - Downlink FIFO Register low-word (16-bits) */
+#define FT1000_REG_MAG_DFRH 0x000a /* DFRH - Downlink FIFO Register high-word (16-bits) */
+#define FT1000_REG_MAG_DFSR 0x000c /* DFSR - Downlink FIFO Status Register */
+#define FT1000_REG_MAG_DPDATA 0x0010 /* DPDATA - Dual Port RAM Indirect Data Register (32-bits) */
+#define FT1000_REG_MAG_DPDATAL 0x0010 /* DPDATAL - Dual Port RAM Indirect Data Register low-word (16-bits) */
+#define FT1000_REG_MAG_DPDATAH 0x0012 /* DPDATAH - Dual Port RAM Indirect Data Register high-word (16-bits) */
+#define FT1000_REG_MAG_WATERMARK 0x002c /* WMARK - Watermark Register */
+
+/* Reserved Dual Port RAM offsets for Electrabuzz */
+#define FT1000_DPRAM_TX_BASE 0x0002 /* Host to PC Card Messaging Area */
+#define FT1000_DPRAM_RX_BASE 0x0800 /* PC Card to Host Messaging Area */
+#define FT1000_FIFO_LEN 0x07FC /* total length for DSP FIFO tracking */
+#define FT1000_HI_HO 0x07FE /* heartbeat with HI/HO */
+#define FT1000_DSP_STATUS 0x0FFE /* dsp status - non-zero is a request to reset dsp */
+#define FT1000_DSP_LED 0x0FFA /* dsp led status for PAD device */
+#define FT1000_DSP_CON_STATE 0x0FF8 /* DSP Connection Status Info */
+#define FT1000_DPRAM_FEFE 0x0002 /* location for dsp ready indicator */
+#define FT1000_DSP_TIMER0 0x1FF0 /* Timer Field from Basestation */
+#define FT1000_DSP_TIMER1 0x1FF2 /* Timer Field from Basestation */
+#define FT1000_DSP_TIMER2 0x1FF4 /* Timer Field from Basestation */
+#define FT1000_DSP_TIMER3 0x1FF6 /* Timer Field from Basestation */
+
+/* Reserved Dual Port RAM offsets for Magnemite */
+#define FT1000_DPRAM_MAG_TX_BASE 0x0000 /* Host to PC Card Messaging Area */
+#define FT1000_DPRAM_MAG_RX_BASE 0x0200 /* PC Card to Host Messaging Area */
+
+#define FT1000_MAG_FIFO_LEN 0x1FF /* total length for DSP FIFO tracking */
+#define FT1000_MAG_FIFO_LEN_INDX 0x1 /* low-word index */
+#define FT1000_MAG_HI_HO 0x1FF /* heartbeat with HI/HO */
+#define FT1000_MAG_HI_HO_INDX 0x0 /* high-word index */
+#define FT1000_MAG_DSP_LED 0x3FE /* dsp led status for PAD device */
+#define FT1000_MAG_DSP_LED_INDX 0x0 /* dsp led status for PAD device */
+#define FT1000_MAG_DSP_CON_STATE 0x3FE /* DSP Connection Status Info */
+#define FT1000_MAG_DSP_CON_STATE_INDX 0x1 /* DSP Connection Status Info */
+#define FT1000_MAG_DPRAM_FEFE 0x000 /* location for dsp ready indicator */
+#define FT1000_MAG_DPRAM_FEFE_INDX 0x0 /* location for dsp ready indicator */
+#define FT1000_MAG_DSP_TIMER0 0x3FC /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER0_INDX 0x1
+#define FT1000_MAG_DSP_TIMER1 0x3FC /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER1_INDX 0x0
+#define FT1000_MAG_DSP_TIMER2 0x3FD /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER2_INDX 0x1
+#define FT1000_MAG_DSP_TIMER3 0x3FD /* Timer Field from Basestation */
+#define FT1000_MAG_DSP_TIMER3_INDX 0x0
+#define FT1000_MAG_TOTAL_LEN 0x200
+#define FT1000_MAG_TOTAL_LEN_INDX 0x1
+#define FT1000_MAG_PH_LEN 0x200
+#define FT1000_MAG_PH_LEN_INDX 0x0
+#define FT1000_MAG_PORT_ID 0x201
+#define FT1000_MAG_PORT_ID_INDX 0x0
+
+#define HOST_INTF_LE 0x0 /* Host interface little endian mode */
+#define HOST_INTF_BE 0x1 /* Host interface big endian mode */
+
+/* PC Card to Host Doorbell assignments */
+#define FT1000_DB_DPRAM_RX 0x0001 /* this value indicates that DSP has data for host in DPRAM */
+#define FT1000_ASIC_RESET_REQ 0x0004 /* DSP requesting host to reset the ASIC */
+#define FT1000_DSP_ASIC_RESET 0x0008 /* DSP indicating host that it will reset the ASIC */
+#define FT1000_DB_COND_RESET 0x0010 /* DSP request for a card reset. */
+
+/* Host to PC Card Doorbell assignments */
+#define FT1000_DB_DPRAM_TX 0x0100 /* this value indicates that host has data for DSP in DPRAM. */
+#define FT1000_ASIC_RESET_DSP 0x0400 /* Responds to FT1000_ASIC_RESET_REQ */
+#define FT1000_DB_HB 0x1000 /* Indicates that supervisor has a heartbeat message for DSP. */
+
+#define FT1000_DPRAM_BASE 0x0000 /* Dual Port RAM starting offset */
+
+#define hi 0x6869 /* PC Card heartbeat values */
+#define ho 0x686f /* PC Card heartbeat values */
+
+/* Magnemite specific defines */
+#define hi_mag 0x6968 /* Byte swap hi to avoid additional system call */
+#define ho_mag 0x6f68 /* Byte swap ho to avoid additional system call */
+
+/* Bit field definitions for Host Interrupt Status Register */
+/* Indicate the cause of an interrupt. */
+#define ISR_EMPTY 0x00 /* no bits set */
+#define ISR_DOORBELL_ACK 0x01 /* Doorbell acknowledge from DSP */
+#define ISR_DOORBELL_PEND 0x02 /* Doorbell pending from DSP */
+#define ISR_RCV 0x04 /* Packet available in Downlink FIFO */
+#define ISR_WATERMARK 0x08 /* Watermark requirements satisfied */
+
+/* Bit field definition for Host Interrupt Mask */
+#define ISR_MASK_NONE 0x0000 /* no bits set */
+#define ISR_MASK_DOORBELL_ACK 0x0001 /* Doorbell acknowledge mask */
+#define ISR_MASK_DOORBELL_PEND 0x0002 /* Doorbell pending mask */
+#define ISR_MASK_RCV 0x0004 /* Downlink Packet available mask */
+#define ISR_MASK_WATERMARK 0x0008 /* Watermark interrupt mask */
+#define ISR_MASK_ALL 0xffff /* Mask all interrupts */
+
+/* Bit field definition for Host Control Register */
+#define DSP_RESET_BIT 0x0001 /* Bit field to control dsp reset state */
+ /* (0 = out of reset 1 = reset) */
+#define ASIC_RESET_BIT 0x0002 /* Bit field to control ASIC reset state */
+ /* (0 = out of reset 1 = reset) */
+
+/* Default interrupt mask (Enable Doorbell pending and Packet available interrupts) */
+#define ISR_DEFAULT_MASK 0x7ff9
+
+/* Application specific IDs */
+#define DSPID 0x20
+#define HOSTID 0x10
+#define DSPAIRID 0x90
+#define DRIVERID 0x00
+#define NETWORKID 0x20
+
+/* Size of DPRAM Message */
+#define MAX_CMD_SQSIZE 1780
+
+#define ENET_MAX_SIZE 1514
+#define ENET_HEADER_SIZE 14
+
+#define SLOWQ_TYPE 0
+#define FASTQ_TYPE 1
+
+#define MAX_DSP_SESS_REC 1024
+
+#define DSP_QID_OFFSET 4
+#define PSEUDOSZ 16
+#define PSEUDOSZWRD 8
+
+/* Maximum number of occurrence of pseudo header errors before resetting PC Card. */
+#define MAX_PH_ERR 300
+
+/* Driver message types */
+#define MEDIA_STATE 0x0010
+#define TIME_UPDATE 0x0020
+#define DSP_PROVISION 0x0030
+#define DSP_INIT_MSG 0x0050
+#define DSP_HIBERNATE 0x0060
+
+#define DSP_STORE_INFO 0x0070
+#define DSP_GET_INFO 0x0071
+#define GET_DRV_ERR_RPT_MSG 0x0073
+#define RSP_DRV_ERR_RPT_MSG 0x0074
+
+/* Driver Error Messages for DSP */
+#define DSP_HB_INFO 0x7ef0
+#define DSP_FIFO_INFO 0x7ef1
+#define DSP_CONDRESET_INFO 0x7ef2
+#define DSP_CMDLEN_INFO 0x7ef3
+#define DSP_CMDPHCKSUM_INFO 0x7ef4
+#define DSP_PKTPHCKSUM_INFO 0x7ef5
+#define DSP_PKTLEN_INFO 0x7ef6
+#define DSP_USER_RESET 0x7ef7
+#define FIFO_FLUSH_MAXLIMIT 0x7ef8
+#define FIFO_FLUSH_BADCNT 0x7ef9
+#define FIFO_ZERO_LEN 0x7efa
+
+#define HOST_QID_OFFSET 5
+#define QTYPE_OFFSET 13
+
+#define SUCCESS 0x00
+#define FAILURE 0x01
+
+#define MAXIMUM_ASIC_HB_CNT 15
struct drv_msg {
struct pseudo_hdr pseudo;
u16 type;
u16 length;
u8 data[0];
-} __attribute__ ((packed));
+} __packed;
struct media_msg {
struct pseudo_hdr pseudo;
@@ -283,81 +254,83 @@ struct media_msg {
u16 length;
u16 state;
u32 ip_addr;
- u32 net_mask;
+ u32 net_mask;
u32 gateway;
u32 dns_1;
u32 dns_2;
-} __attribute__ ((packed));
+} __packed;
struct dsp_init_msg {
- struct pseudo_hdr pseudo;
- u16 type;
- u16 length;
- u8 DspVer[DSPVERSZ]; // DSP version number
- u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number
- u8 Sku[SKUSZ]; // SKU
- u8 eui64[EUISZ]; // EUI64
- u8 ProductMode[MODESZ]; // Product Mode (Market/Production)
- u8 RfCalVer[CALVERSZ]; // Rf Calibration version
- u8 RfCalDate[CALDATESZ]; // Rf Calibration date
-} __attribute__ ((packed));
+ struct pseudo_hdr pseudo;
+ u16 type;
+ u16 length;
+ u8 DspVer[DSPVERSZ]; /* DSP version number */
+ u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
+ u8 Sku[SKUSZ]; /* SKU */
+ u8 eui64[EUISZ]; /* EUI64 */
+ u8 ProductMode[MODESZ]; /* Product Mode (Market/Production) */
+ u8 RfCalVer[CALVERSZ]; /* Rf Calibration version */
+ u8 RfCalDate[CALDATESZ]; /* Rf Calibration date */
+} __packed;
struct prov_record {
- struct list_head list;
- u8 *pprov_data;
+ struct list_head list;
+ u8 *pprov_data;
};
struct ft1000_info {
- struct net_device_stats stats;
- u16 DrvErrNum;
- u16 AsicID;
- int PktIntfErr;
- int CardReady;
- int registered;
- int mediastate;
- u16 packetseqnum;
- u8 squeseqnum; // sequence number on slow queue
- spinlock_t dpram_lock;
- u16 fifo_cnt;
- u8 DspVer[DSPVERSZ]; // DSP version number
- u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number
- u8 Sku[SKUSZ]; // SKU
- u8 eui64[EUISZ]; // EUI64
- time_t ConTm; // Connection Time
- u16 LedStat;
- u16 ConStat;
- u16 ProgConStat;
- u8 ProductMode[MODESZ];
- u8 RfCalVer[CALVERSZ];
- u8 RfCalDate[CALDATESZ];
- u16 DSP_TIME[4];
- struct list_head prov_list;
- u16 DSPInfoBlklen;
+ struct net_device_stats stats;
+ u16 DrvErrNum;
+ u16 AsicID;
+ int PktIntfErr;
+ int CardReady;
+ int registered;
+ int mediastate;
+ u16 packetseqnum;
+ u8 squeseqnum; /* sequence number on slow queue */
+ spinlock_t dpram_lock;
+ u16 fifo_cnt;
+ u8 DspVer[DSPVERSZ]; /* DSP version number */
+ u8 HwSerNum[HWSERNUMSZ]; /* Hardware Serial Number */
+ u8 Sku[SKUSZ]; /* SKU */
+ u8 eui64[EUISZ]; /* EUI64 */
+ time_t ConTm; /* Connection Time */
+ u16 LedStat;
+ u16 ConStat;
+ u16 ProgConStat;
+ u8 ProductMode[MODESZ];
+ u8 RfCalVer[CALVERSZ];
+ u8 RfCalDate[CALDATESZ];
+ u16 DSP_TIME[4];
+ struct list_head prov_list;
+ u16 DSPInfoBlklen;
int (*ft1000_reset)(void *);
- void *link;
- u16 DSPInfoBlk[MAX_DSP_SESS_REC];
- union {
- u16 Rec[MAX_DSP_SESS_REC];
- u32 MagRec[MAX_DSP_SESS_REC/2];
- } DSPSess;
+ void *link;
+ u16 DSPInfoBlk[MAX_DSP_SESS_REC];
+ union {
+ u16 Rec[MAX_DSP_SESS_REC];
+ u32 MagRec[MAX_DSP_SESS_REC/2];
+ } DSPSess;
struct proc_dir_entry *proc_ft1000;
char netdevname[IFNAMSIZ];
};
-extern u16 ft1000_read_dpram (struct net_device *dev, int offset);
+extern u16 ft1000_read_dpram(struct net_device *dev, int offset);
extern void card_bootload(struct net_device *dev);
-extern u16 ft1000_read_dpram_mag_16 (struct net_device *dev, int offset, int Index);
-extern u32 ft1000_read_dpram_mag_32 (struct net_device *dev, int offset);
-void ft1000_write_dpram_mag_32 (struct net_device *dev, int offset, u32 value);
+extern u16 ft1000_read_dpram_mag_16(struct net_device *dev, int offset, int Index);
+extern u32 ft1000_read_dpram_mag_32(struct net_device *dev, int offset);
+void ft1000_write_dpram_mag_32(struct net_device *dev, int offset, u32 value);
/* Read the value of a given ASIC register. */
-static inline u16 ft1000_read_reg (struct net_device *dev, u16 offset) {
- return inw(dev->base_addr + offset);
+static inline u16 ft1000_read_reg(struct net_device *dev, u16 offset)
+{
+ return inw(dev->base_addr + offset);
}
/* Set the value of a given ASIC register. */
-static inline void ft1000_write_reg (struct net_device *dev, u16 offset, u16 value) {
- outw(value, dev->base_addr + offset);
+static inline void ft1000_write_reg(struct net_device *dev, u16 offset, u16 value)
+{
+ outw(value, dev->base_addr + offset);
}
-#endif // _FT1000H_
+#endif
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists