| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20110805143447.GA2538@ericsson.com>
Date: Fri, 5 Aug 2011 07:34:47 -0700
From: Guenter Roeck <guenter.roeck@...csson.com>
To: Dmitry Artamonow <mad_soft@...ox.ru>
CC: "lm-sensors@...sensors.org" <lm-sensors@...sensors.org>,
Ian Dobson <i.dobson@...net-ian.com>,
Jean Delvare <khali@...ux-fr.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] hwmon: add caseopen detection to w83627ehf driver
On Fri, Aug 05, 2011 at 09:00:43AM -0400, Dmitry Artamonow wrote:
> Export caseopen alarm status into userspace for
> Winbond w83627* chips and also implement alarm clear knob.
>
> Signed-off-by: Dmitry Artamonow <mad_soft@...ox.ru>
> ---
> drivers/hwmon/w83627ehf.c | 66 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 66 insertions(+), 0 deletions(-)
>
> Tested on board with W83627DHG-P chip and also checked against datasheets
> for other W83627 chips. NCT6775F / NCT6776F are currently excluded as I
> haven't found datasheets for them online and can't check if they have the
> same registers for caseopen detection. If anyone having access to these
> datasheets can check that caseopen detection is read from 4th bit of
> register 42h (Bank 0), and cleared by writing 1 and then 0 into bit 7 of
> register 46h (Bank 0), then I'll throw away those 'if'-s and resend updated
> patch.
>
Hi Dmitry,
NCT6775F / NCT6776F support the same bits. NCT6776F has a second set of bits.
42/4 and 46/7 is CASEOPEN0, 42/6 and 46/6 is CASEOPEN1. Register 46/7 (and 46/6
for NCT6776F) is self-clearing, meaning it is not necessary to write 0,
but that should not matter.
Couple of additional comments below.
> diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
> index f2b377c..696e5d6 100644
> --- a/drivers/hwmon/w83627ehf.c
> +++ b/drivers/hwmon/w83627ehf.c
> @@ -197,6 +197,9 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };
> #define W83627EHF_REG_ALARM2 0x45A
> #define W83627EHF_REG_ALARM3 0x45B
>
> +#define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2, bit 4 */
> +#define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3, bit 7 */
> +
> /* SmartFan registers */
> #define W83627EHF_REG_FAN_STEPUP_TIME 0x0f
> #define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e
> @@ -468,6 +471,7 @@ struct w83627ehf_data {
> s16 temp_max[9];
> s16 temp_max_hyst[9];
> u32 alarms;
> + u8 caseopen;
>
> u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
> u8 pwm_enable[4]; /* 1->manual
> @@ -873,6 +877,9 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
> (w83627ehf_read_value(data,
> W83627EHF_REG_ALARM3) << 16);
>
> + data->caseopen = !!(w83627ehf_read_value(data,
> + W83627EHF_REG_CASEOPEN_DET) & 0x10);
> +
If you use !!, you should define caseopen as bool for consistency.
And then you don't need !! since the conversion to 0/1 will be done automatically.
Even better would be to just save the register value and enable support
for the second set of caseopen bits for NCT6776F (ie do the !!() in
the show function).
> data->last_updated = jiffies;
> data->valid = 1;
> }
> @@ -1654,6 +1661,47 @@ show_vid(struct device *dev, struct device_attribute *attr, char *buf)
> }
> static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
>
> +
> +/* Case open detection */
> +
> +static ssize_t
> +show_caseopen(struct device *dev, struct device_attribute *attr, char *buf)
> +{
> + struct w83627ehf_data *data = w83627ehf_update_device(dev);
> + unsigned int reg;
> + mutex_lock(&data->update_lock);
> + reg = w83627ehf_read_value(data, 0x42);
> + mutex_unlock(&data->update_lock);
> + return sprintf(buf, "%d\n", data->caseopen);
> +}
> +
> +static ssize_t
> +store_caseopen_clear(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct w83627ehf_data *data = dev_get_drvdata(dev);
> + unsigned long val;
> + unsigned int reg;
> +
> + if (strict_strtoul(buf, 10, &val) || val != 0)
> + return -EINVAL;
> +
> + mutex_lock(&data->update_lock);
> + reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
> + w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | 0x80);
> + reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
> + w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~0x80);
> + reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
I am a bit lost here. What are those additional two reads for ?
Seems to be unnecessary.
> + data->valid = 0; /* Force cache refresh */
> + mutex_unlock(&data->update_lock);
> +
> + return count;
> +}
> +
> +static struct sensor_device_attribute sda_caseopen =
> + SENSOR_ATTR(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen,
> + store_caseopen_clear , 12);
> +
Formatting: s/ , /, /
> /*
> * Driver and device management
> */
> @@ -1663,6 +1711,7 @@ static void w83627ehf_device_remove_files(struct device *dev)
> /* some entries in the following arrays may not have been used in
> * device_create_file(), but device_remove_file() will ignore them */
> int i;
> + struct w83627ehf_sio_data *sio_data = dev->platform_data;
> struct w83627ehf_data *data = dev_get_drvdata(dev);
>
> for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
> @@ -1710,6 +1759,13 @@ static void w83627ehf_device_remove_files(struct device *dev)
> device_remove_file(dev, &sda_temp_type[i].dev_attr);
> }
>
> + /*
> + * FIXME: if NCT chips have same caseopen registers as w83627 ones
> + * this check can be removed
> + */
> + if (!(sio_data->kind == nct6775 || sio_data->kind == nct6776))
> + device_remove_file(dev, &sda_caseopen.dev_attr);
> +
Please remove the check.
> device_remove_file(dev, &dev_attr_name);
> device_remove_file(dev, &dev_attr_cpu0_vid);
> }
> @@ -2261,6 +2317,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
> goto exit_remove;
> }
>
> + /*
> + * FIXME: if NCT chips have same caseopen registers as w83627 ones
> + * this check can be removed
> + */
> + if (!(sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
> + err = device_create_file(dev, &sda_caseopen.dev_attr);
> + if (err)
> + goto exit_remove;
> + }
> +
Please remove the check.
> err = device_create_file(dev, &dev_attr_name);
> if (err)
> goto exit_remove;
> --
> 1.7.5.1.300.gc565c
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists