| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <FC1F9E38C0703341A1A750524E2525A9018AE300@XYUS-EX22.xyus.xyratex.com>
Date: Thu, 22 Sep 2011 10:44:21 -0700
From: "Mark Salyzyn" <mark_salyzyn@...xyratex.com>
To: "Luben Tuikov" <ltuikov@...oo.com>,
"James Bottomley" <jbottomley@...allels.com>
Cc: <linux-scsi@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: RE: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
Yes, we are Done. I thought I made it clear I am willing to Ack your patch as attached as-is.
Acked-by: Mark Salyzyn <mark_salyzyn@...xyratex.com>
-----Original Message-----
From: Luben Tuikov [mailto:ltuikov@...oo.com]
Sent: Thursday, September 22, 2011 1:20 PM
To: Mark Salyzyn; James Bottomley
Cc: linux-scsi@...r.kernel.org; linux-kernel@...r.kernel.org
Subject: Re: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
LOOK AT THE SOURCE CODE: drivers/scsi/libsas/sas_expander.c:
/* Here we spill over 80 columns. It is intentional.
*/
static int sas_check_parent_topology(struct domain_device *child)
{
struct expander_device *child_ex = &child->ex_dev;
struct expander_device *parent_ex;
int i;
int res = 0;
if (!child->parent)
return 0;
if (child->parent->dev_type != EDGE_DEV &&
child->parent->dev_type != FANOUT_DEV)
return 0;
...
ARE WE DONE?
----- Original Message -----
> From: Mark Salyzyn <mark_salyzyn@...xyratex.com>
> To: Luben Tuikov <ltuikov@...oo.com>; James Bottomley <jbottomley@...allels.com>
> Cc: linux-scsi@...r.kernel.org; linux-kernel@...r.kernel.org
> Sent: Thursday, September 22, 2011 9:55 AM
> Subject: RE: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
>
> Except for the fact the patch as located in the attachment is still not in
> compliance, the patch works for me.
>
> Sincerely -- Mark Salyzyn
>
>> scsi-misc-2.6/scripts/checkpatch.pl
> 0001-SCSI-libsas-Allow-expander-T-T-attachments.patch
> WARNING: line over 80 characters
> #57: FILE: drivers/scsi/libsas/sas_expander.c:1245:
> + if (child_phy->routing_attr ==
> SUBTRACTIVE_ROUTING ||
>
> WARNING: line over 80 characters
> #59: FILE: drivers/scsi/libsas/sas_expander.c:1247:
> + child_ex->t2t_supp &&
> parent_ex->t2t_supp)) {
>
> WARNING: line over 80 characters
> #62: FILE: drivers/scsi/libsas/sas_expander.c:1250:
> + sas_print_parent_topology_bug(child,
> parent_phy, child_phy);
>
> total: 0 errors, 3 warnings, 82 lines checked
>
> 0001-SCSI-libsas-Allow-expander-T-T-attachments.patch has style problems, please
> review.
>
> If any of these errors are false positives, please report
> them to the maintainer, see CHECKPATCH in MAINTAINERS.
>
> -----Original Message-----
> From: linux-scsi-owner@...r.kernel.org [mailto:linux-scsi-owner@...r.kernel.org]
> On Behalf Of Luben Tuikov
> Sent: Thursday, September 22, 2011 12:42 PM
> To: James Bottomley
> Cc: linux-scsi@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: [RESEND] [PATCH] [SCSI] libsas: Allow expander T-T attachments
>
> Allow expander table-to-table attachments for
> expanders that support it.
>
> Signed-off-by: Luben Tuikov <ltuikov@...oo.com>
> ---
> drivers/scsi/libsas/sas_expander.c | 20 ++++++++++++++------
> include/scsi/libsas.h | 3 +++
> include/scsi/sas.h | 14 ++++++++++++--
> 3 files changed, 29 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/scsi/libsas/sas_expander.c
> b/drivers/scsi/libsas/sas_expander.c
> index f84084b..e8d0115 100644
> --- a/drivers/scsi/libsas/sas_expander.c
> +++ b/drivers/scsi/libsas/sas_expander.c
> @@ -329,6 +329,7 @@ static void ex_assign_report_general(struct domain_device
> *dev,
> dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
> dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
> dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
> + dev->ex_dev.t2t_supp = rg->t2t_supp;
> dev->ex_dev.conf_route_table = rg->conf_route_table;
> dev->ex_dev.configuring = rg->configuring;
> memcpy(dev->ex_dev.enclosure_logical_id, rg->enclosure_logical_id,
> 8);
> @@ -1133,15 +1134,17 @@ static void sas_print_parent_topology_bug(struct
> domain_device *child,
> };
> struct domain_device *parent = child->parent;
>
> - sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx phy 0x%x
> "
> - "has %c:%c routing link!\n",
> + sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex
> %016llx "
> + "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n",
>
> ex_type[parent->dev_type],
> SAS_ADDR(parent->sas_addr),
> + parent->ex_dev.t2t_supp,
> parent_phy->phy_id,
>
> ex_type[child->dev_type],
> SAS_ADDR(child->sas_addr),
> + child->ex_dev.t2t_supp,
> child_phy->phy_id,
>
> ra_char[parent_phy->routing_attr],
> @@ -1238,10 +1241,15 @@ static int sas_check_parent_topology(struct
> domain_device *child)
> sas_print_parent_topology_bug(child, parent_phy,
> child_phy);
> res = -ENODEV;
> }
> - } else if (parent_phy->routing_attr == TABLE_ROUTING &&
> - child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
> - sas_print_parent_topology_bug(child, parent_phy, child_phy);
> - res = -ENODEV;
> + } else if (parent_phy->routing_attr == TABLE_ROUTING) {
> + if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
> + (child_phy->routing_attr == TABLE_ROUTING &&
> + child_ex->t2t_supp && parent_ex->t2t_supp))
> {
> + /* All good */;
> + } else {
> + sas_print_parent_topology_bug(child, parent_phy,
> child_phy);
> + res = -ENODEV;
> + }
> }
> break;
> case FANOUT_DEV:
> diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
> index ee86606..793f80b 100644
> --- a/include/scsi/libsas.h
> +++ b/include/scsi/libsas.h
> @@ -142,8 +142,11 @@ struct expander_device {
> u16 ex_change_count;
> u16 max_route_indexes;
> u8 num_phys;
> +
> + u8 t2t_supp:1;
> u8 configuring:1;
> u8 conf_route_table:1;
> +
> u8 enclosure_logical_id[8];
>
> struct ex_phy *ex_phy;
> diff --git a/include/scsi/sas.h b/include/scsi/sas.h
> index e9fd022..f59f182 100644
> --- a/include/scsi/sas.h
> +++ b/include/scsi/sas.h
> @@ -341,7 +341,12 @@ struct report_general_resp {
>
> u8 conf_route_table:1;
> u8 configuring:1;
> - u8 _r_b:6;
> + u8 config_others:1;
> + u8 orej_retry_supp:1;
> + u8 stp_cont_awt:1;
> + u8 self_config:1;
> + u8 zone_config:1;
> + u8 t2t_supp:1;
>
> u8 _r_c;
>
> @@ -528,7 +533,12 @@ struct report_general_resp {
> u8 _r_a;
> u8 num_phys;
>
> - u8 _r_b:6;
> + u8 t2t_supp:1;
> + u8 zone_config:1;
> + u8 self_config:1;
> + u8 stp_cont_awt:1;
> + u8 orej_retry_supp:1;
> + u8 config_others:1;
> u8 configuring:1;
> u8 conf_route_table:1;
>
> --
> 1.7.2.2.165.gbc382
> ______________________________________________________________________
> This email may contain privileged or confidential information, which should only
> be used for the purpose for which it was sent by Xyratex. No further rights or
> licenses are granted to use such information. If you are not the intended
> recipient of this message, please notify the sender by return and delete it. You
> may not use, copy, disclose or rely on the information contained in it.
>
> Internet email is susceptible to data corruption, interception and unauthorised
> amendment for which Xyratex does not accept liability. While we have taken
> reasonable precautions to ensure that this email is free of viruses, Xyratex
> does not accept liability for the presence of any computer viruses in this
> email, nor for any losses caused as a result of viruses.
>
> Xyratex Technology Limited (03134912), Registered in England & Wales,
> Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
>
> The Xyratex group of companies also includes, Xyratex Ltd, registered in
> Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia)
> Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in
> The People's Republic of China and Xyratex Japan Limited registered in
> Japan.
> ______________________________________________________________________
>
______________________________________________________________________
This email may contain privileged or confidential information, which should only be used for the purpose for which it was sent by Xyratex. No further rights or licenses are granted to use such information. If you are not the intended recipient of this message, please notify the sender by return and delete it. You may not use, copy, disclose or rely on the information contained in it.
Internet email is susceptible to data corruption, interception and unauthorised amendment for which Xyratex does not accept liability. While we have taken reasonable precautions to ensure that this email is free of viruses, Xyratex does not accept liability for the presence of any computer viruses in this email, nor for any losses caused as a result of viruses.
Xyratex Technology Limited (03134912), Registered in England & Wales, Registered Office, Langstone Road, Havant, Hampshire, PO9 1SA.
The Xyratex group of companies also includes, Xyratex Ltd, registered in Bermuda, Xyratex International Inc, registered in California, Xyratex (Malaysia) Sdn Bhd registered in Malaysia, Xyratex Technology (Wuxi) Co Ltd registered in The People's Republic of China and Xyratex Japan Limited registered in Japan.
______________________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists