| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1317263341-19010-1-git-send-email-Gang.Liu@freescale.com>
Date: Thu, 29 Sep 2011 10:28:58 +0800
From: Liu Gang <Gang.Liu@...escale.com>
To: <linuxppc-dev@...ts.ozlabs.org>
CC: <akpm@...ux-foundation.org>, <linux-kernel@...r.kernel.org>,
<r58472@...escale.com>, <B11780@...escale.com>,
<r61911@...escale.com>, Liu Gang <Gang.Liu@...escale.com>,
Lian Minghuan-B31939 <Minghuan.Lian@...escale.com>
Subject: [PATCH 1/4] fsl-rio: Split rio driver into two parts, RapidIO endpoint and RapidIO message unit
The Freescale PowerPC RapidIO controller consists of a RapidIO endpoint and a RapidIO
message unit(RMU). Or use RapidIO message manager(RMan) to replace the RMU in DPAA
architecture. Therefore, we should split the code into two function modules according
to the hardware architecture.
Add new struct for RMU module, and new initialization function to set up RMU module. This policy
is very conducive to adding new module like RMan, or adding multi-ports or message units support.
Signed-off-by: Lian Minghuan-B31939 <Minghuan.Lian@...escale.com>
Signed-off-by: Liu Gang <Gang.Liu@...escale.com>
---
arch/powerpc/sysdev/Makefile | 2 +-
arch/powerpc/sysdev/fsl_rio.c | 1152 +---------------------------------------
arch/powerpc/sysdev/fsl_rio.h | 78 +++
arch/powerpc/sysdev/fsl_rmu.c | 1163 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 1267 insertions(+), 1128 deletions(-)
create mode 100644 arch/powerpc/sysdev/fsl_rio.h
create mode 100644 arch/powerpc/sysdev/fsl_rmu.c
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index cf736ca..d6be400 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
-obj-$(CONFIG_FSL_RIO) += fsl_rio.o
+obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 22ffccd..9484484 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -10,7 +10,7 @@
* - Added Port-Write message handling
* - Added Machine Check exception handling
*
- * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
* Zhang Wei <wei.zhang@...escale.com>
*
* Copyright 2005 MontaVista Software, Inc.
@@ -28,240 +28,34 @@
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/device.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#undef DEBUG_PW /* Port-Write debugging */
+#include "fsl_rio.h"
-/* RapidIO definition irq, which read from OF-tree */
-#define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq)
-#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
-#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
-#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
-
-#define IPWSR_CLEAR 0x98
-#define OMSR_CLEAR 0x1cb3
-#define IMSR_CLEAR 0x491
-#define IDSR_CLEAR 0x91
-#define ODSR_CLEAR 0x1c00
-#define LTLEECSR_ENABLE_ALL 0xFFC000FC
-#define ESCSR_CLEAR 0x07120204
-#define IECSR_CLEAR 0x80000000
+#undef DEBUG_PW /* Port-Write debugging */
#define RIO_PORT1_EDCSR 0x0640
#define RIO_PORT2_EDCSR 0x0680
#define RIO_PORT1_IECSR 0x10130
#define RIO_PORT2_IECSR 0x101B0
-#define RIO_IM0SR 0x13064
-#define RIO_IM1SR 0x13164
-#define RIO_OM0SR 0x13004
-#define RIO_OM1SR 0x13104
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_P_MSG_REGS_OFFSET 0x11000
-#define RIO_S_MSG_REGS_OFFSET 0x13000
#define RIO_GCCSR 0x13c
#define RIO_ESCSR 0x158
+#define ESCSR_CLEAR 0x07120204
#define RIO_PORT2_ESCSR 0x178
#define RIO_CCSR 0x15c
-#define RIO_LTLEDCSR 0x0608
#define RIO_LTLEDCSR_IER 0x80000000
#define RIO_LTLEDCSR_PRT 0x01000000
-#define RIO_LTLEECSR 0x060c
-#define RIO_EPWISR 0x10010
+#define IECSR_CLEAR 0x80000000
#define RIO_ISR_AACR 0x10120
#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
-#define RIO_MAINT_WIN_SIZE 0x400000
-#define RIO_DBELL_WIN_SIZE 0x1000
-
-#define RIO_MSG_OMR_MUI 0x00000002
-#define RIO_MSG_OSR_TE 0x00000080
-#define RIO_MSG_OSR_QOI 0x00000020
-#define RIO_MSG_OSR_QFI 0x00000010
-#define RIO_MSG_OSR_MUB 0x00000004
-#define RIO_MSG_OSR_EOMI 0x00000002
-#define RIO_MSG_OSR_QEI 0x00000001
-
-#define RIO_MSG_IMR_MI 0x00000002
-#define RIO_MSG_ISR_TE 0x00000080
-#define RIO_MSG_ISR_QFI 0x00000010
-#define RIO_MSG_ISR_DIQI 0x00000001
-
-#define RIO_IPWMR_SEN 0x00100000
-#define RIO_IPWMR_QFIE 0x00000100
-#define RIO_IPWMR_EIE 0x00000020
-#define RIO_IPWMR_CQ 0x00000002
-#define RIO_IPWMR_PWE 0x00000001
-
-#define RIO_IPWSR_QF 0x00100000
-#define RIO_IPWSR_TE 0x00000080
-#define RIO_IPWSR_QFI 0x00000010
-#define RIO_IPWSR_PWD 0x00000008
-#define RIO_IPWSR_PWB 0x00000004
-
-/* EPWISR Error match value */
-#define RIO_EPWISR_PINT1 0x80000000
-#define RIO_EPWISR_PINT2 0x40000000
-#define RIO_EPWISR_MU 0x00000002
-#define RIO_EPWISR_PW 0x00000001
-
-#define RIO_MSG_DESC_SIZE 32
-#define RIO_MSG_BUFFER_SIZE 4096
-#define RIO_MIN_TX_RING_SIZE 2
-#define RIO_MAX_TX_RING_SIZE 2048
-#define RIO_MIN_RX_RING_SIZE 2
-#define RIO_MAX_RX_RING_SIZE 2048
-
-#define DOORBELL_DMR_DI 0x00000002
-#define DOORBELL_DSR_TE 0x00000080
-#define DOORBELL_DSR_QFI 0x00000010
-#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x02
-#define DOORBELL_SID_OFFSET 0x04
-#define DOORBELL_INFO_OFFSET 0x06
-
-#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
- u32 rowtar;
- u32 rowtear;
- u32 rowbar;
- u32 pad2;
- u32 rowar;
- u32 pad3[3];
-};
-
-struct rio_msg_regs {
- u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
- u32 osr; /* 0xD_3004 - Outbound message 0 status register */
- u32 pad1;
- u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
- dequeue pointer address register */
- u32 pad2;
- u32 osar; /* 0xD_3014 - Outbound message 0 source address
- register */
- u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
- register */
- u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
- Register*/
- u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
- register */
- u32 pad3;
- u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
- enqueue pointer address register */
- u32 pad4[13];
- u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
- u32 isr; /* 0xD_3064 - Inbound message 0 status register */
- u32 pad5;
- u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
- pointer address register*/
- u32 pad6;
- u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
- pointer address register */
- u32 pad7[226];
- u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
- u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
- u32 res0[4];
- u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
- register */
- u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
- register */
- u32 res1[3];
- u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
- configuration register */
- u32 res2[12];
- u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
- u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
- u32 pad8;
- u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
- address register */
- u32 pad9;
- u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
- address register */
- u32 pad10[26];
- u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
- u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
- u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
- register */
- u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
- register */
-};
-
-struct rio_tx_desc {
- u32 res1;
- u32 saddr;
- u32 dport;
- u32 dattr;
- u32 res2;
- u32 res3;
- u32 dwcnt;
- u32 res4;
-};
-
-struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-};
-
-struct rio_msg_tx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_TX_RING_SIZE];
- dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
- int tx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_msg_rx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_RX_RING_SIZE];
- int rx_slot;
- int size;
- void *dev_id;
-};
-
-struct rio_port_write_msg {
- void *virt;
- dma_addr_t phys;
- u32 msg_count;
- u32 err_count;
- u32 discard_count;
-};
-
-struct rio_priv {
- struct device *dev;
- void __iomem *regs_win;
- struct rio_atmu_regs __iomem *atmu_regs;
- struct rio_atmu_regs __iomem *maint_atmu_regs;
- struct rio_atmu_regs __iomem *dbell_atmu_regs;
- void __iomem *dbell_win;
- void __iomem *maint_win;
- struct rio_msg_regs __iomem *msg_regs;
- struct rio_dbell_ring dbell_ring;
- struct rio_msg_tx_ring msg_tx_ring;
- struct rio_msg_rx_ring msg_rx_ring;
- struct rio_port_write_msg port_write_msg;
- int bellirq;
- int txirq;
- int rxirq;
- int pwirq;
- struct work_struct pw_work;
- struct kfifo pw_fifo;
- spinlock_t pw_fifo_lock;
-};
#define __fsl_read_rio_config(x, addr, err, op) \
__asm__ __volatile__( \
@@ -279,7 +73,7 @@ struct rio_priv {
: "=r" (err), "=r" (x) \
: "b" (addr), "i" (-EFAULT), "0" (err))
-static void __iomem *rio_regs_win;
+void __iomem *rio_regs_win;
#ifdef CONFIG_E500
int fsl_rio_mcheck_exception(struct pt_regs *regs)
@@ -311,42 +105,6 @@ EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception);
#endif
/**
- * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
- * @mport: RapidIO master port info
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int fsl_rio_doorbell_send(struct rio_mport *mport,
- int index, u16 destid, u16 data)
-{
- struct rio_priv *priv = mport->priv;
- pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
- break;
- case RIO_PHY_SERIAL:
- /* In the serial version silicons, such as MPC8548, MPC8641,
- * below operations is must be.
- */
- out_be32(&priv->msg_regs->odmr, 0x00000000);
- out_be32(&priv->msg_regs->odretcr, 0x00000004);
- out_be32(&priv->msg_regs->oddpr, destid << 16);
- out_be32(&priv->msg_regs->oddatr, data);
- out_be32(&priv->msg_regs->odmr, 0x00000001);
- break;
- }
-
- return 0;
-}
-
-/**
* fsl_local_config_read - Generate a MPC85xx local config space read
* @mport: RapidIO master port info
* @index: ID of RapdiIO interface
@@ -362,7 +120,7 @@ static int fsl_local_config_read(struct rio_mport *mport,
{
struct rio_priv *priv = mport->priv;
pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index,
- offset);
+ offset);
*data = in_be32(priv->regs_win + offset);
return 0;
@@ -384,8 +142,8 @@ static int fsl_local_config_write(struct rio_mport *mport,
{
struct rio_priv *priv = mport->priv;
pr_debug
- ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
+ ("fsl_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
out_be32(priv->regs_win + offset, data);
return 0;
@@ -413,7 +171,8 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
u32 rval, err = 0;
pr_debug
- ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ ("fsl_rio_config_read:"
+ " index %d destid %d hopcount %d offset %8.8x len %d\n",
index, destid, hopcount, offset, len);
/* 16MB maintenance window possible */
@@ -423,7 +182,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -470,7 +229,8 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
struct rio_priv *priv = mport->priv;
u8 *data;
pr_debug
- ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ ("fsl_rio_config_write:"
+ "index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
index, destid, hopcount, offset, len, val);
/* 16MB maintenance windows possible */
@@ -480,7 +240,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
out_be32(&priv->maint_atmu_regs->rowtar,
(destid << 22) | (hopcount << 12) | (offset >> 12));
- out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10));
data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1));
switch (len) {
@@ -500,590 +260,7 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
return 0;
}
-/**
- * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int
-fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
- void *buffer, size_t len)
-{
- struct rio_priv *priv = mport->priv;
- u32 omr;
- struct rio_tx_desc *desc = (struct rio_tx_desc *)priv->msg_tx_ring.virt
- + priv->msg_tx_ring.tx_slot;
- int ret = 0;
-
- pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
- "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
-
- if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Copy and clear rest of buffer */
- memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot], buffer,
- len);
- if (len < (RIO_MAX_MSG_SIZE - 4))
- memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
- + len, 0, RIO_MAX_MSG_SIZE - len);
-
- switch (mport->phy_type) {
- case RIO_PHY_PARALLEL:
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
-
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
- break;
- case RIO_PHY_SERIAL:
- /* Set mbox field for message, and set destid */
- desc->dport = (rdev->destid << 16) | (mbox & 0x3);
-
- /* Enable EOMI interrupt and priority */
- desc->dattr = 0x28000000;
- break;
- }
-
- /* Set transfer size aligned to next power of 2 (in double words) */
- desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
- /* Set snooping and source buffer address */
- desc->saddr = 0x00000004
- | priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
-
- /* Increment enqueue pointer */
- omr = in_be32(&priv->msg_regs->omr);
- out_be32(&priv->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
- /* Go to next descriptor */
- if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
- priv->msg_tx_ring.tx_slot = 0;
-
- out:
- return ret;
-}
-
-/**
- * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_tx_handler(int irq, void *dev_instance)
-{
- int osr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- osr = in_be32(&priv->msg_regs->osr);
-
- if (osr & RIO_MSG_OSR_TE) {
- pr_info("RIO: outbound message transmission error\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_QOI) {
- pr_info("RIO: outbound message queue overflow\n");
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32(&priv->msg_regs->odqdpar);
- int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
- slot);
-
- /* Ack the end-of-message interrupt */
- out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, j, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_TX_RING_SIZE) ||
- (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize shadow copy ring */
- priv->msg_tx_ring.dev_id = dev_id;
- priv->msg_tx_ring.size = entries;
-
- for (i = 0; i < priv->msg_tx_ring.size; i++) {
- priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
- if (!priv->msg_tx_ring.virt_buffer[i]) {
- rc = -ENOMEM;
- for (j = 0; j < priv->msg_tx_ring.size; j++)
- if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(priv->dev,
- RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.
- virt_buffer[j],
- priv->msg_tx_ring.
- phys_buffer[j]);
- goto out;
- }
- }
-
- /* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- &priv->msg_tx_ring.phys, GFP_KERNEL);
- if (!priv->msg_tx_ring.virt) {
- rc = -ENOMEM;
- goto out_dma;
- }
- memset(priv->msg_tx_ring.virt, 0,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- priv->msg_tx_ring.tx_slot = 0;
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
- out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
-
- /* Configure for snooping */
- out_be32(&priv->msg_regs->osar, 0x00000004);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->osr, 0x000000b3);
-
- /* Hook up outbound message handler */
- rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
- "msg_tx", (void *)mport);
- if (rc < 0)
- goto out_irq;
-
- /*
- * Configure outbound message unit
- * Snooping
- * Interrupts (all enabled, except QEIE)
- * Chaining mode
- * Disable
- */
- out_be32(&priv->msg_regs->omr, 0x00100220);
-
- /* Set number of entries */
- out_be32(&priv->msg_regs->omr,
- in_be32(&priv->msg_regs->omr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32(&priv->msg_regs->omr, in_be32(&priv->msg_regs->omr) | 0x1);
-
- out:
- return rc;
-
- out_irq:
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- out_dma:
- for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
-
- return rc;
-}
-
-/**
- * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->omr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev,
- priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_TX(mport), (void *)mport);
-}
-
-/**
- * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-fsl_rio_rx_handler(int irq, void *dev_instance)
-{
- int isr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- isr = in_be32(&priv->msg_regs->isr);
-
- if (isr & RIO_MSG_ISR_TE) {
- pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&priv->msg_regs->isr, RIO_MSG_ISR_TE);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (isr & RIO_MSG_ISR_DIQI) {
- /*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
-
- /* Ack the queueing interrupt */
- out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-static int
-fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, rc = 0;
- struct rio_priv *priv = mport->priv;
-
- if ((entries < RIO_MIN_RX_RING_SIZE) ||
- (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize client buffer ring */
- priv->msg_rx_ring.dev_id = dev_id;
- priv->msg_rx_ring.size = entries;
- priv->msg_rx_ring.rx_slot = 0;
- for (i = 0; i < priv->msg_rx_ring.size; i++)
- priv->msg_rx_ring.virt_buffer[i] = NULL;
-
- /* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
- priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- &priv->msg_rx_ring.phys, GFP_KERNEL);
- if (!priv->msg_rx_ring.virt) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
- out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->isr, 0x00000091);
-
- /* Hook up inbound message handler */
- rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
- "msg_rx", (void *)mport);
- if (rc < 0) {
- dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
- priv->msg_tx_ring.virt_buffer[i],
- priv->msg_tx_ring.phys_buffer[i]);
- goto out;
- }
-
- /*
- * Configure inbound message unit:
- * Snooping
- * 4KB max message size
- * Unmask all interrupt sources
- * Disable
- */
- out_be32(&priv->msg_regs->imr, 0x001b0060);
-
- /* Set number of queue entries */
- setbits32(&priv->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
-
- /* Now enable the unit */
- setbits32(&priv->msg_regs->imr, 0x1);
-
- out:
- return rc;
-}
-
-/**
- * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- /* Disable inbound message unit */
- out_be32(&priv->msg_regs->imr, 0);
-
- /* Free ring */
- dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
-
- /* Free interrupt */
- free_irq(IRQ_RIO_RX(mport), (void *)mport);
-}
-
-/**
- * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
- int rc = 0;
- struct rio_priv *priv = mport->priv;
-
- pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- priv->msg_rx_ring.rx_slot);
-
- if (priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- priv->msg_rx_ring.rx_slot);
- rc = -EINVAL;
- goto out;
- }
-
- priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
- if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
- priv->msg_rx_ring.rx_slot = 0;
-
- out:
- return rc;
-}
-
-/**
- * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
-{
- struct rio_priv *priv = mport->priv;
- u32 phys_buf, virt_buf;
- void *buf = NULL;
- int buf_idx;
-
- phys_buf = in_be32(&priv->msg_regs->ifqdpar);
-
- /* If no more messages, then bail out */
- if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
- goto out2;
-
- virt_buf = (u32) priv->msg_rx_ring.virt + (phys_buf
- - priv->msg_rx_ring.phys);
- buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = priv->msg_rx_ring.virt_buffer[buf_idx];
-
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
- goto out1;
- }
-
- /* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
- /* Clear the available buffer */
- priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
- out1:
- setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
-
- out2:
- return buf;
-}
-
-/**
- * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_dbell_handler(int irq, void *dev_instance)
-{
- int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
-
- dsr = in_be32(&priv->msg_regs->dsr);
-
- if (dsr & DOORBELL_DSR_TE) {
- pr_info("RIO: doorbell reception error\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
- goto out;
- }
-
- if (dsr & DOORBELL_DSR_QFI) {
- pr_info("RIO: doorbell queue full\n");
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (dsr & DOORBELL_DSR_DIQI) {
- u32 dmsg =
- (u32) priv->dbell_ring.virt +
- (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
- struct rio_dbell *dbell;
- int found = 0;
-
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
- }
- }
- if (found) {
- dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
- DBELL_INF(dmsg));
- } else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- }
- setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
- out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * fsl_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_doorbell_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Map outbound doorbell window immediately after maintenance window */
- priv->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE);
- if (!priv->dbell_win) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
- rc = -ENOMEM;
- goto out;
- }
-
- /* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
- DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
- if (!priv->dbell_ring.virt) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
- rc = -ENOMEM;
- iounmap(priv->dbell_win);
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
- out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
-
- /* Clear interrupt status */
- out_be32(&priv->msg_regs->dsr, 0x00000091);
-
- /* Hook up doorbell handler */
- rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport);
- if (rc < 0) {
- iounmap(priv->dbell_win);
- dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
- priv->dbell_ring.virt, priv->dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
- goto out;
- }
-
- /* Configure doorbells for snooping, 512 entries, and enable */
- out_be32(&priv->msg_regs->dmr, 0x00108161);
-
- out:
- return rc;
-}
-
-static void port_error_handler(struct rio_mport *port, int offset)
+void fsl_rio_port_error_handler(struct rio_mport *port, int offset)
{
/*XXX: Error recovery is not implemented, we just clear errors */
out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
@@ -1098,263 +275,6 @@ static void port_error_handler(struct rio_mport *port, int offset)
out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
}
}
-
-static void msg_unit_error_handler(struct rio_mport *port)
-{
- struct rio_priv *priv = port->priv;
-
- /*XXX: Error recovery is not implemented, we just clear errors */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
-
- out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
- out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
-
- out_be32(&priv->msg_regs->odsr, ODSR_CLEAR);
- out_be32(&priv->msg_regs->dsr, IDSR_CLEAR);
-
- out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR);
-}
-
-/**
- * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles port write interrupts. Parses a list of registered
- * port write event handlers and executes a matching event handler.
- */
-static irqreturn_t
-fsl_rio_port_write_handler(int irq, void *dev_instance)
-{
- u32 ipwmr, ipwsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
- struct rio_priv *priv = port->priv;
- u32 epwisr, tmp;
-
- epwisr = in_be32(priv->regs_win + RIO_EPWISR);
- if (!(epwisr & RIO_EPWISR_PW))
- goto pw_done;
-
- ipwmr = in_be32(&priv->msg_regs->pwmr);
- ipwsr = in_be32(&priv->msg_regs->pwsr);
-
-#ifdef DEBUG_PW
- pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
- if (ipwsr & RIO_IPWSR_QF)
- pr_debug(" QF");
- if (ipwsr & RIO_IPWSR_TE)
- pr_debug(" TE");
- if (ipwsr & RIO_IPWSR_QFI)
- pr_debug(" QFI");
- if (ipwsr & RIO_IPWSR_PWD)
- pr_debug(" PWD");
- if (ipwsr & RIO_IPWSR_PWB)
- pr_debug(" PWB");
- pr_debug(" )\n");
-#endif
- /* Schedule deferred processing if PW was received */
- if (ipwsr & RIO_IPWSR_QFI) {
- /* Save PW message (if there is room in FIFO),
- * otherwise discard it.
- */
- if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
- priv->port_write_msg.msg_count++;
- kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
- RIO_PW_MSG_SIZE);
- } else {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- }
- /* Clear interrupt and issue Clear Queue command. This allows
- * another port-write to be received.
- */
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_QFI);
- out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
-
- schedule_work(&priv->pw_work);
- }
-
- if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
- priv->port_write_msg.err_count++;
- pr_debug("RIO: Port-Write Transaction Err (%d)\n",
- priv->port_write_msg.err_count);
- /* Clear Transaction Error: port-write controller should be
- * disabled when clearing this error
- */
- out_be32(&priv->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_TE);
- out_be32(&priv->msg_regs->pwmr, ipwmr);
- }
-
- if (ipwsr & RIO_IPWSR_PWD) {
- priv->port_write_msg.discard_count++;
- pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
- priv->port_write_msg.discard_count);
- out_be32(&priv->msg_regs->pwsr, RIO_IPWSR_PWD);
- }
-
-pw_done:
- if (epwisr & RIO_EPWISR_PINT1) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 0);
- }
-
- if (epwisr & RIO_EPWISR_PINT2) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- port_error_handler(port, 1);
- }
-
- if (epwisr & RIO_EPWISR_MU) {
- tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
- pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
- msg_unit_error_handler(port);
- }
-
- return IRQ_HANDLED;
-}
-
-static void fsl_pw_dpc(struct work_struct *work)
-{
- struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
- unsigned long flags;
- u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
-
- /*
- * Process port-write messages
- */
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
- RIO_PW_MSG_SIZE)) {
- /* Process one message */
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-#ifdef DEBUG_PW
- {
- u32 i;
- pr_debug("%s : Port-Write Message:", __func__);
- for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
- if ((i%4) == 0)
- pr_debug("\n0x%02x: 0x%08x", i*4,
- msg_buffer[i]);
- else
- pr_debug(" 0x%08x", msg_buffer[i]);
- }
- pr_debug("\n");
- }
-#endif
- /* Pass the port-write message to RIO core for processing */
- rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
- spin_lock_irqsave(&priv->pw_fifo_lock, flags);
- }
- spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
-}
-
-/**
- * fsl_rio_pw_enable - enable/disable port-write interface init
- * @mport: Master port implementing the port write unit
- * @enable: 1=enable; 0=disable port-write message handling
- */
-static int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
-{
- struct rio_priv *priv = mport->priv;
- u32 rval;
-
- rval = in_be32(&priv->msg_regs->pwmr);
-
- if (enable)
- rval |= RIO_IPWMR_PWE;
- else
- rval &= ~RIO_IPWMR_PWE;
-
- out_be32(&priv->msg_regs->pwmr, rval);
-
- return 0;
-}
-
-/**
- * fsl_rio_port_write_init - MPC85xx port write interface init
- * @mport: Master port implementing the port write unit
- *
- * Initializes port write unit hardware and DMA buffer
- * ring. Called from fsl_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int fsl_rio_port_write_init(struct rio_mport *mport)
-{
- struct rio_priv *priv = mport->priv;
- int rc = 0;
-
- /* Following configurations require a disabled port write controller */
- out_be32(&priv->msg_regs->pwmr,
- in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
-
- /* Initialize port write */
- priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
- RIO_PW_MSG_SIZE,
- &priv->port_write_msg.phys, GFP_KERNEL);
- if (!priv->port_write_msg.virt) {
- pr_err("RIO: unable allocate port write queue\n");
- return -ENOMEM;
- }
-
- priv->port_write_msg.err_count = 0;
- priv->port_write_msg.discard_count = 0;
-
- /* Point dequeue/enqueue pointers at first entry */
- out_be32(&priv->msg_regs->epwqbar, 0);
- out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
-
- pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
- in_be32(&priv->msg_regs->epwqbar),
- in_be32(&priv->msg_regs->pwqbar));
-
- /* Clear interrupt status IPWSR */
- out_be32(&priv->msg_regs->pwsr,
- (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
-
- /* Configure port write contoller for snooping enable all reporting,
- clear queue full */
- out_be32(&priv->msg_regs->pwmr,
- RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
-
-
- /* Hook up port-write handler */
- rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
- IRQF_SHARED, "port-write", (void *)mport);
- if (rc < 0) {
- pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
- goto err_out;
- }
- /* Enable Error Interrupt */
- out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
-
- INIT_WORK(&priv->pw_work, fsl_pw_dpc);
- spin_lock_init(&priv->pw_fifo_lock);
- if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
- pr_err("FIFO allocation failed\n");
- rc = -ENOMEM;
- goto err_out_irq;
- }
-
- pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
- in_be32(&priv->msg_regs->pwmr),
- in_be32(&priv->msg_regs->pwsr));
-
- return rc;
-
-err_out_irq:
- free_irq(IRQ_RIO_PW(mport), (void *)mport);
-err_out:
- dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
- priv->port_write_msg.virt,
- priv->port_write_msg.phys);
- return rc;
-}
-
static inline void fsl_rio_info(struct device *dev, u32 ccsr)
{
const char *str;
@@ -1429,7 +349,8 @@ int fsl_rio_setup(struct platform_device *dev)
dev->dev.of_node->full_name);
return -EFAULT;
}
- dev_info(&dev->dev, "Of-device full name %s\n", dev->dev.of_node->full_name);
+ dev_info(&dev->dev, "Of-device full name %s\n",
+ dev->dev.of_node->full_name);
dev_info(&dev->dev, "Regs: %pR\n", ®s);
dt_range = of_get_property(dev->dev.of_node, "ranges", &rlen);
@@ -1469,15 +390,7 @@ int fsl_rio_setup(struct platform_device *dev)
ops->lcwrite = fsl_local_config_write;
ops->cread = fsl_rio_config_read;
ops->cwrite = fsl_rio_config_write;
- ops->dsend = fsl_rio_doorbell_send;
ops->pwenable = fsl_rio_pw_enable;
- ops->open_outb_mbox = fsl_open_outb_mbox;
- ops->open_inb_mbox = fsl_open_inb_mbox;
- ops->close_outb_mbox = fsl_close_outb_mbox;
- ops->close_inb_mbox = fsl_close_inb_mbox;
- ops->add_outb_message = fsl_add_outb_message;
- ops->add_inb_buffer = fsl_add_inb_buffer;
- ops->get_inb_message = fsl_get_inb_message;
port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
if (!port) {
@@ -1507,16 +420,8 @@ int fsl_rio_setup(struct platform_device *dev)
goto err_res;
}
- priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
- priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2);
- priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3);
- priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4);
- dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n",
- priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq);
-
- rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
- rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
- rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+ priv->pwirq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ dev_info(&dev->dev, "pwirq: %d\n", priv->pwirq);
strcpy(port->name, "RIO0 mport");
priv->dev = &dev->dev;
@@ -1538,7 +443,7 @@ int fsl_rio_setup(struct platform_device *dev)
/* Checking the port training status */
if (in_be32((priv->regs_win + RIO_ESCSR)) & 1) {
dev_err(&dev->dev, "Port is not ready. "
- "Try to restart connection...\n");
+ "Try to restart connection...\n");
switch (port->phy_type) {
case RIO_PHY_SERIAL:
/* Disable ports */
@@ -1582,10 +487,6 @@ int fsl_rio_setup(struct platform_device *dev)
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
- priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
- ((port->phy_type == RIO_PHY_SERIAL) ?
- RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
/* Set to receive any dist ID for serial RapidIO controller. */
if (port->phy_type == RIO_PHY_SERIAL)
@@ -1598,11 +499,8 @@ int fsl_rio_setup(struct platform_device *dev)
priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
- /* Configure outbound doorbell window */
- out_be32(&priv->dbell_atmu_regs->rowbar,
- (law_start + RIO_MAINT_WIN_SIZE) >> 12);
- out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */
- fsl_rio_doorbell_init(port);
+ fsl_rio_setup_rmu(port, dev->dev.of_node);
+
fsl_rio_port_write_init(port);
return 0;
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
new file mode 100644
index 0000000..f888a1e
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -0,0 +1,78 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@...go.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@....com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@...escale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@...escale.com>
+ * Liu Gang <Gang.Liu@...escale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@...nel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FSL_RIO_H
+#define __FSL_RIO_H
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/kfifo.h>
+
+#define RIO_REGS_WIN(mport) (((struct rio_priv *)(mport->priv))->regs_win)
+
+#define RIO_MAINT_WIN_SIZE 0x400000
+#define RIO_LTLEDCSR 0x0608
+
+struct rio_atmu_regs {
+ u32 rowtar;
+ u32 rowtear;
+ u32 rowbar;
+ u32 pad2;
+ u32 rowar;
+ u32 pad3[3];
+};
+
+struct rio_port_write_msg {
+ void *virt;
+ dma_addr_t phys;
+ u32 msg_count;
+ u32 err_count;
+ u32 discard_count;
+};
+
+struct rio_priv {
+ struct device *dev;
+ void __iomem *regs_win;
+ struct rio_atmu_regs __iomem *atmu_regs;
+ struct rio_atmu_regs __iomem *maint_atmu_regs;
+ void __iomem *maint_win;
+ struct rio_port_write_msg port_write_msg;
+ int pwirq;
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+ void *rmm_handle; /* RapidIO message manager(unit) Handle */
+};
+
+extern void __iomem *rio_regs_win;
+
+extern int fsl_rio_setup_rmu(struct rio_mport *mport,
+ struct device_node *node);
+extern int fsl_rio_port_write_init(struct rio_mport *mport);
+extern int fsl_rio_pw_enable(struct rio_mport *mport, int enable);
+extern void fsl_rio_port_error_handler(struct rio_mport *port, int offset);
+
+#endif
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
new file mode 100644
index 0000000..0a3e6cf
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -0,0 +1,1163 @@
+/*
+ * Freescale MPC85xx/MPC86xx RapidIO RMU support
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@...go.com>
+ * - fixed maintenance access routines, check for aligned access
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@....com>
+ * - Added Port-Write message handling
+ * - Added Machine Check exception handling
+ *
+ * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc.
+ * Zhang Wei <wei.zhang@...escale.com>
+ * Lian Minghuan-B31939 <Minghuan.Lian@...escale.com>
+ * Liu Gang <Gang.Liu@...escale.com>
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@...nel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#include "fsl_rio.h"
+
+#define GET_RMM_HANDLE(mport) \
+ (((struct rio_priv *)(mport->priv))->rmm_handle)
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq)
+#define IRQ_RIO_BELL(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->bellirq)
+#define IRQ_RIO_TX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->txirq)
+#define IRQ_RIO_RX(m) (((struct fsl_rmu *)(GET_RMM_HANDLE(m)))->rxirq)
+
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define RIO_IPWMR_SEN 0x00100000
+#define RIO_IPWMR_QFIE 0x00000100
+#define RIO_IPWMR_EIE 0x00000020
+#define RIO_IPWMR_CQ 0x00000002
+#define RIO_IPWMR_PWE 0x00000001
+
+#define RIO_IPWSR_QF 0x00100000
+#define RIO_IPWSR_TE 0x00000080
+#define RIO_IPWSR_QFI 0x00000010
+#define RIO_IPWSR_PWD 0x00000008
+#define RIO_IPWSR_PWB 0x00000004
+
+#define RIO_EPWISR 0x10010
+/* EPWISR Error match value */
+#define RIO_EPWISR_PINT1 0x80000000
+#define RIO_EPWISR_PINT2 0x40000000
+#define RIO_EPWISR_MU 0x00000002
+#define RIO_EPWISR_PW 0x00000001
+
+#define IPWSR_CLEAR 0x98
+#define OMSR_CLEAR 0x1cb3
+#define IMSR_CLEAR 0x491
+#define IDSR_CLEAR 0x91
+#define ODSR_CLEAR 0x1c00
+#define LTLEECSR_ENABLE_ALL 0xFFC000FC
+#define RIO_LTLEECSR 0x060c
+
+#define RIO_IM0SR 0x13064
+#define RIO_IM1SR 0x13164
+#define RIO_OM0SR 0x13004
+#define RIO_OM1SR 0x13104
+
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+
+#define RIO_DBELL_WIN_SIZE 0x1000
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_msg_regs {
+ u32 omr; /* 0xD_3000 - Outbound message 0 mode register */
+ u32 osr; /* 0xD_3004 - Outbound message 0 status register */
+ u32 pad1;
+ u32 odqdpar; /* 0xD_300C - Outbound message 0 descriptor queue
+ dequeue pointer address register */
+ u32 pad2;
+ u32 osar; /* 0xD_3014 - Outbound message 0 source address
+ register */
+ u32 odpr; /* 0xD_3018 - Outbound message 0 destination port
+ register */
+ u32 odatr; /* 0xD_301C - Outbound message 0 destination attributes
+ Register*/
+ u32 odcr; /* 0xD_3020 - Outbound message 0 double-word count
+ register */
+ u32 pad3;
+ u32 odqepar; /* 0xD_3028 - Outbound message 0 descriptor queue
+ enqueue pointer address register */
+ u32 pad4[13];
+ u32 imr; /* 0xD_3060 - Inbound message 0 mode register */
+ u32 isr; /* 0xD_3064 - Inbound message 0 status register */
+ u32 pad5;
+ u32 ifqdpar; /* 0xD_306C - Inbound message 0 frame queue dequeue
+ pointer address register*/
+ u32 pad6;
+ u32 ifqepar; /* 0xD_3074 - Inbound message 0 frame queue enqueue
+ pointer address register */
+ u32 pad7[226];
+ u32 odmr; /* 0xD_3400 - Outbound doorbell mode register */
+ u32 odsr; /* 0xD_3404 - Outbound doorbell status register */
+ u32 res0[4];
+ u32 oddpr; /* 0xD_3418 - Outbound doorbell destination port
+ register */
+ u32 oddatr; /* 0xD_341c - Outbound doorbell destination attributes
+ register */
+ u32 res1[3];
+ u32 odretcr; /* 0xD_342C - Outbound doorbell retry error threshold
+ configuration register */
+ u32 res2[12];
+ u32 dmr; /* 0xD_3460 - Inbound doorbell mode register */
+ u32 dsr; /* 0xD_3464 - Inbound doorbell status register */
+ u32 pad8;
+ u32 dqdpar; /* 0xD_346C - Inbound doorbell queue dequeue Pointer
+ address register */
+ u32 pad9;
+ u32 dqepar; /* 0xD_3474 - Inbound doorbell Queue enqueue pointer
+ address register */
+ u32 pad10[26];
+ u32 pwmr; /* 0xD_34E0 - Inbound port-write mode register */
+ u32 pwsr; /* 0xD_34E4 - Inbound port-write status register */
+ u32 epwqbar; /* 0xD_34E8 - Extended Port-Write Queue Base Address
+ register */
+ u32 pwqbar; /* 0xD_34EC - Inbound port-write queue base address
+ register */
+};
+
+struct rio_tx_desc {
+ u32 res1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 res2;
+ u32 res3;
+ u32 dwcnt;
+ u32 res4;
+};
+
+struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+};
+
+struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+};
+
+struct fsl_rmu {
+ struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ void __iomem *dbell_win;
+ struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
+
+/**
+ * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ osr = in_be32(&rmu->msg_regs->osr);
+
+ if (osr & RIO_MSG_OSR_TE) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_QOI) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32(&rmu->msg_regs->odqdpar);
+ int slot = (dqp - rmu->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, rmu->msg_tx_ring.dev_id, -1,
+ slot);
+
+ /* Ack the end-of-message interrupt */
+ out_be32(&rmu->msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+fsl_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ isr = in_be32(&rmu->msg_regs->isr);
+
+ if (isr & RIO_MSG_ISR_TE) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32((void *)&rmu->msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * We implement *only* mailbox 0, but can receive messages
+ * for any mailbox/letter to that mailbox destination. So,
+ * make the callback with an unknown/invalid mailbox number
+ * argument.
+ */
+ port->inb_msg[0].mcback(port, rmu->msg_rx_ring.dev_id, -1, -1);
+
+ /* Ack the queueing interrupt */
+ out_be32(&rmu->msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * fsl_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ dsr = in_be32(&rmu->msg_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_QFI);
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) rmu->dbell_ring.virt +
+ (in_be32(&rmu->msg_regs->dqdpar) & 0xfff);
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug
+ ("RIO: processing doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ list_for_each_entry(dbell, &port->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+ (dbell->res->end >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbell->dinb(port, dbell->dev_id,
+ DBELL_SID(dmsg),
+ DBELL_TID(dmsg), DBELL_INF(dmsg));
+ } else {
+ pr_debug
+ ("RIO: spurious doorbell,"
+ " sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ }
+ setbits32(&rmu->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&rmu->msg_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+out:
+ return IRQ_HANDLED;
+}
+
+void msg_unit_error_handler(struct rio_mport *port)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(port);
+
+ /*XXX: Error recovery is not implemented, we just clear errors */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0);
+
+ out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR);
+ out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR);
+
+ out_be32(&rmu->msg_regs->odsr, ODSR_CLEAR);
+ out_be32(&rmu->msg_regs->dsr, IDSR_CLEAR);
+
+ out_be32(&rmu->msg_regs->pwsr, IPWSR_CLEAR);
+}
+
+/**
+ * fsl_rio_port_write_handler - MPC85xx port write interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles port write interrupts. Parses a list of registered
+ * port write event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+fsl_rio_port_write_handler(int irq, void *dev_instance)
+{
+ u32 ipwmr, ipwsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
+ struct fsl_rmu *rmu;
+ u32 epwisr, tmp;
+
+ rmu = GET_RMM_HANDLE(port);
+ epwisr = in_be32(priv->regs_win + RIO_EPWISR);
+ if (!(epwisr & RIO_EPWISR_PW))
+ goto pw_done;
+
+ ipwmr = in_be32(&rmu->msg_regs->pwmr);
+ ipwsr = in_be32(&rmu->msg_regs->pwsr);
+
+#ifdef DEBUG_PW
+ pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr);
+ if (ipwsr & RIO_IPWSR_QF)
+ pr_debug(" QF");
+ if (ipwsr & RIO_IPWSR_TE)
+ pr_debug(" TE");
+ if (ipwsr & RIO_IPWSR_QFI)
+ pr_debug(" QFI");
+ if (ipwsr & RIO_IPWSR_PWD)
+ pr_debug(" PWD");
+ if (ipwsr & RIO_IPWSR_PWB)
+ pr_debug(" PWB");
+ pr_debug(" )\n");
+#endif
+ /* Schedule deferred processing if PW was received */
+ if (ipwsr & RIO_IPWSR_QFI) {
+ /* Save PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) {
+ priv->port_write_msg.msg_count++;
+ kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt,
+ RIO_PW_MSG_SIZE);
+ } else {
+ priv->port_write_msg.discard_count++;
+ pr_debug("RIO: ISR Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ }
+ /* Clear interrupt and issue Clear Queue command. This allows
+ * another port-write to be received.
+ */
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_QFI);
+ out_be32(&rmu->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ);
+
+ schedule_work(&priv->pw_work);
+ }
+
+ if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) {
+ priv->port_write_msg.err_count++;
+ pr_debug("RIO: Port-Write Transaction Err (%d)\n",
+ priv->port_write_msg.err_count);
+ /* Clear Transaction Error: port-write controller should be
+ * disabled when clearing this error
+ */
+ out_be32(&rmu->msg_regs->pwmr, ipwmr & ~RIO_IPWMR_PWE);
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_TE);
+ out_be32(&rmu->msg_regs->pwmr, ipwmr);
+ }
+
+ if (ipwsr & RIO_IPWSR_PWD) {
+ priv->port_write_msg.discard_count++;
+ pr_debug("RIO: Port Discarded Port-Write Msg(s) (%d)\n",
+ priv->port_write_msg.discard_count);
+ out_be32(&rmu->msg_regs->pwsr, RIO_IPWSR_PWD);
+ }
+
+pw_done:
+ if (epwisr & RIO_EPWISR_PINT1) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(port, 0);
+ }
+
+ if (epwisr & RIO_EPWISR_PINT2) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ fsl_rio_port_error_handler(port, 1);
+ }
+
+ if (epwisr & RIO_EPWISR_MU) {
+ tmp = in_be32(priv->regs_win + RIO_LTLEDCSR);
+ pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp);
+ msg_unit_error_handler(port);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void fsl_pw_dpc(struct work_struct *work)
+{
+ struct rio_priv *priv = container_of(work, struct rio_priv, pw_work);
+ unsigned long flags;
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+
+ /*
+ * Process port-write messages
+ */
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ RIO_PW_MSG_SIZE)) {
+ /* Process one message */
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
+ if ((i%4) == 0)
+ pr_debug("\n0x%02x: 0x%08x", i*4,
+ msg_buffer[i]);
+ else
+ pr_debug(" 0x%08x", msg_buffer[i]);
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ spin_lock_irqsave(&priv->pw_fifo_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->pw_fifo_lock, flags);
+}
+
+/**
+ * fsl_rio_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+int fsl_rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct fsl_rmu *rmu;
+ u32 rval;
+
+ rmu = GET_RMM_HANDLE(mport);
+
+ rval = in_be32(&rmu->msg_regs->pwmr);
+
+ if (enable)
+ rval |= RIO_IPWMR_PWE;
+ else
+ rval &= ~RIO_IPWMR_PWE;
+
+ out_be32(&rmu->msg_regs->pwmr, rval);
+
+ return 0;
+}
+
+/**
+ * fsl_rio_port_write_init - MPC85xx port write interface init
+ * @mport: Master port implementing the port write unit
+ *
+ * Initializes port write unit hardware and DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+
+int fsl_rio_port_write_init(struct rio_mport *mport)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu;
+ int rc = 0;
+
+ rmu = GET_RMM_HANDLE(mport);
+
+ /* Following configurations require a disabled port write controller */
+ out_be32(&rmu->msg_regs->pwmr,
+ in_be32(&rmu->msg_regs->pwmr) & ~RIO_IPWMR_PWE);
+
+ /* Initialize port write */
+ priv->port_write_msg.virt = dma_alloc_coherent(priv->dev,
+ RIO_PW_MSG_SIZE,
+ &priv->port_write_msg.phys, GFP_KERNEL);
+ if (!priv->port_write_msg.virt) {
+ pr_err("RIO: unable allocate port write queue\n");
+ return -ENOMEM;
+ }
+
+ priv->port_write_msg.err_count = 0;
+ priv->port_write_msg.discard_count = 0;
+
+ /* Point dequeue/enqueue pointers at first entry */
+ out_be32(&rmu->msg_regs->epwqbar, 0);
+ out_be32(&rmu->msg_regs->pwqbar, (u32) priv->port_write_msg.phys);
+
+ pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n",
+ in_be32(&rmu->msg_regs->epwqbar),
+ in_be32(&rmu->msg_regs->pwqbar));
+
+ /* Clear interrupt status IPWSR */
+ out_be32(&rmu->msg_regs->pwsr,
+ (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
+
+ /* Configure port write contoller for snooping enable all reporting,
+ clear queue full */
+ out_be32(&rmu->msg_regs->pwmr,
+ RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
+
+
+ /* Hook up port-write handler */
+ rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler,
+ IRQF_SHARED, "port-write", (void *)mport);
+ if (rc < 0) {
+ pr_err("MPC85xx RIO: unable to request inbound doorbell irq");
+ goto err_out;
+ }
+ /* Enable Error Interrupt */
+ out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL);
+
+ INIT_WORK(&priv->pw_work, fsl_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ pr_err("FIFO allocation failed\n");
+ rc = -ENOMEM;
+ goto err_out_irq;
+ }
+
+ pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n",
+ in_be32(&rmu->msg_regs->pwmr),
+ in_be32(&rmu->msg_regs->pwsr));
+
+ return rc;
+
+err_out_irq:
+ free_irq(IRQ_RIO_PW(mport), (void *)mport);
+err_out:
+ dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE,
+ priv->port_write_msg.virt,
+ priv->port_write_msg.phys);
+ return rc;
+}
+
+/**
+ * fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int fsl_rio_doorbell_send(struct rio_mport *mport,
+ int index, u16 destid, u16 data)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ index, destid, data);
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ out_be32(&rmu->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(rmu->dbell_win, data);
+ break;
+ case RIO_PHY_SERIAL:
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&rmu->msg_regs->odmr, 0x00000000);
+ out_be32(&rmu->msg_regs->odretcr, 0x00000004);
+ out_be32(&rmu->msg_regs->oddpr, destid << 16);
+ out_be32(&rmu->msg_regs->oddatr, data);
+ out_be32(&rmu->msg_regs->odmr, 0x00000001);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+static int
+fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 omr;
+ struct rio_tx_desc *desc = (struct rio_tx_desc *)rmu->msg_tx_ring.virt
+ + rmu->msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \
+ "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len);
+
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot], buffer,
+ len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset(rmu->msg_tx_ring.virt_buffer[rmu->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
+
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
+
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | (mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+ break;
+ }
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004
+ | rmu->msg_tx_ring.phys_buffer[rmu->msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ omr = in_be32(&rmu->msg_regs->omr);
+ out_be32(&rmu->msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++rmu->msg_tx_ring.tx_slot == rmu->msg_tx_ring.size)
+ rmu->msg_tx_ring.tx_slot = 0;
+
+out:
+ return ret;
+}
+
+/**
+ * fsl_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+static int
+fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ rmu->msg_tx_ring.dev_id = dev_id;
+ rmu->msg_tx_ring.size = entries;
+
+ for (i = 0; i < rmu->msg_tx_ring.size; i++) {
+ rmu->msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ &rmu->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt_buffer[i]) {
+ rc = -ENOMEM;
+ for (j = 0; j < rmu->msg_tx_ring.size; j++)
+ if (rmu->msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(priv->dev,
+ RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.
+ virt_buffer[j],
+ rmu->msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ &rmu->msg_tx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_tx_ring.virt) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ memset(rmu->msg_tx_ring.virt, 0,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ rmu->msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->odqdpar, rmu->msg_tx_ring.phys);
+ out_be32(&rmu->msg_regs->odqepar, rmu->msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32(&rmu->msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0,
+ "msg_tx", (void *)mport);
+ if (rc < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ out_be32(&rmu->msg_regs->omr,
+ in_be32(&rmu->msg_regs->omr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32(&rmu->msg_regs->omr, in_be32(&rmu->msg_regs->omr) | 0x1);
+
+out:
+ return rc;
+
+out_irq:
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+out_dma:
+ for (i = 0; i < rmu->msg_tx_ring.size; i++)
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * fsl_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+static void fsl_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev,
+ rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ rmu->msg_tx_ring.virt, rmu->msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_TX(mport), (void *)mport);
+}
+
+/**
+ * fsl_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+static int
+fsl_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ rmu->msg_rx_ring.dev_id = dev_id;
+ rmu->msg_rx_ring.size = entries;
+ rmu->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < rmu->msg_rx_ring.size; i++)
+ rmu->msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ rmu->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
+ rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ &rmu->msg_rx_ring.phys, GFP_KERNEL);
+ if (!rmu->msg_rx_ring.virt) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->ifqdpar, (u32) rmu->msg_rx_ring.phys);
+ out_be32(&rmu->msg_regs->ifqepar, (u32) rmu->msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", (void *)mport);
+ if (rc < 0) {
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
+ rmu->msg_tx_ring.virt_buffer[i],
+ rmu->msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32(&rmu->msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ setbits32(&rmu->msg_regs->imr, (get_bitmask_order(entries) - 2) << 12);
+
+ /* Now enable the unit */
+ setbits32(&rmu->msg_regs->imr, 0x1);
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+static void fsl_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ /* Disable inbound message unit */
+ out_be32(&rmu->msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(priv->dev, rmu->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ rmu->msg_rx_ring.virt, rmu->msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(IRQ_RIO_RX(mport), (void *)mport);
+}
+
+/**
+ * fsl_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+static int fsl_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+
+ pr_debug("RIO: fsl_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ rmu->msg_rx_ring.rx_slot);
+
+ if (rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot]) {
+ printk(KERN_ERR
+ "RIO: error adding inbound buffer %d, buffer exists\n",
+ rmu->msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rmu->msg_rx_ring.virt_buffer[rmu->msg_rx_ring.rx_slot] = buf;
+ if (++rmu->msg_rx_ring.rx_slot == rmu->msg_rx_ring.size)
+ rmu->msg_rx_ring.rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * fsl_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+static void *fsl_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ u32 phys_buf, virt_buf;
+ void *buf = NULL;
+ int buf_idx;
+
+ phys_buf = in_be32(&rmu->msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32(&rmu->msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf
+ - rmu->msg_rx_ring.phys);
+ buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = rmu->msg_rx_ring.virt_buffer[buf_idx];
+
+ if (!buf) {
+ printk(KERN_ERR
+ "RIO: inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+out1:
+ setbits32(&rmu->msg_regs->imr, RIO_MSG_IMR_MI);
+
+out2:
+ return buf;
+}
+
+/**
+ * fsl_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int fsl_rio_doorbell_init(struct rio_mport *mport)
+{
+ struct rio_priv *priv = mport->priv;
+ struct fsl_rmu *rmu = GET_RMM_HANDLE(mport);
+ int rc = 0;
+
+ /* Map outbound doorbell window immediately after maintenance window */
+ rmu->dbell_win = ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE);
+ if (!rmu->dbell_win) {
+ printk(KERN_ERR
+ "RIO: unable to map outbound doorbell window\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Initialize inbound doorbells */
+ rmu->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
+ DOORBELL_MESSAGE_SIZE, &rmu->dbell_ring.phys, GFP_KERNEL);
+ if (!rmu->dbell_ring.virt) {
+ printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ iounmap(rmu->dbell_win);
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32(&rmu->msg_regs->dqdpar, (u32) rmu->dbell_ring.phys);
+ out_be32(&rmu->msg_regs->dqepar, (u32) rmu->dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32(&rmu->msg_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+ "dbell_rx", (void *)mport);
+ if (rc < 0) {
+ iounmap(rmu->dbell_win);
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
+ rmu->dbell_ring.virt, rmu->dbell_ring.phys);
+ printk(KERN_ERR
+ "MPC85xx RIO: unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32(&rmu->msg_regs->dmr, 0x00108161);
+
+out:
+ return rc;
+}
+
+int fsl_rio_setup_rmu(struct rio_mport *mport, struct device_node *node)
+{
+ struct rio_priv *priv;
+ struct fsl_rmu *rmu;
+ struct rio_ops *ops;
+
+ if (!mport || !mport->priv || !node)
+ return -1;
+
+ rmu = kzalloc(sizeof(struct fsl_rmu), GFP_KERNEL);
+ if (!rmu)
+ return -ENOMEM;
+
+ priv = mport->priv;
+ priv->rmm_handle = rmu;
+ rmu->dbell_atmu_regs = priv->atmu_regs + 2;
+ rmu->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
+ ((mport->phy_type == RIO_PHY_SERIAL) ?
+ RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+
+ rmu->bellirq = irq_of_parse_and_map(node, 2);
+ rmu->txirq = irq_of_parse_and_map(node, 3);
+ rmu->rxirq = irq_of_parse_and_map(node, 4);
+ dev_info(priv->dev, "bellirq: %d, txirq: %d, rxirq %d\n",
+ rmu->bellirq, rmu->txirq, rmu->rxirq);
+
+ ops = mport->ops;
+
+ ops->dsend = fsl_rio_doorbell_send;
+ ops->open_outb_mbox = fsl_open_outb_mbox;
+ ops->open_inb_mbox = fsl_open_inb_mbox;
+ ops->close_outb_mbox = fsl_close_outb_mbox;
+ ops->close_inb_mbox = fsl_close_inb_mbox;
+ ops->add_outb_message = fsl_add_outb_message;
+ ops->add_inb_buffer = fsl_add_inb_buffer;
+ ops->get_inb_message = fsl_get_inb_message;
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
+ /* Configure outbound doorbell window */
+ out_be32(&rmu->dbell_atmu_regs->rowbar,
+ (mport->iores.start + RIO_MAINT_WIN_SIZE) >> 12);
+ /* 4k window size */
+ out_be32(&rmu->dbell_atmu_regs->rowar, 0x8004200b);
+
+ fsl_rio_doorbell_init(mport);
+
+ return 0;
+}
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists